Computer freezing run assist for airport and isp is failed

computer freezing run assist for airport and isp is failed. Go thru assist me and then it will reconnect the isp... I reset my 2wire thinking that would help but no.

Without more information, it's hard to tell what's wrong... Obliviously something has changed in your environment, if it has been working just fine before. Still, I'd do some testing, step by step with psexec (running under system account like the TS engine),
add some logging on all of the steps and try to solve the problem that way. You really, really should consider using app model with single script (with your own logging) to deploy your application. If you don't know why it has to use AD account for installation,
I'd contact the vendor and ask, that's just silly way for an installer to work, or have you even tried does it work with system account? You could also use procmon to actually see what's happening under the hood when the installer runs (with the Ad account
and with SYSTEM account)....

Similar Messages

I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

You would reinstall 10.6 using your installation DVD.
Out of curiosity, how much RAM do you have? Recent versions of OS X really shine with 4GB or more.
Matt

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

How run app for customers and how to send dunning notice to vendors

Hi experts.
Can any one help on following issue with example scenarios.
how run app for customers and how to send dunning notice to vendors

Hi,dear
you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
regards,
nagesh.

[svn:fx-trunk] 5473: Fix for bug around handling of constraints during and after effects were run , both for old and new effects.

Revision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as

Revision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as

HT201269 my computer was re-imaged for school and now when i plug in my iphone it doesnt show up on itunes. Any solutions??

my computer was re-imaged for school and now when i plug in my iphone it doesnt show up on itunes. Any solutions??

Can you connect a USB memory stick to the school's laptop?

I am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks.

i am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks. when a peaks get detected it would trigger a pulse of approx 1 sec duration and at the same time it would disable the other peak detector for 1 sec time duration. after the time period, again both the peak detectors would be enabled. i have been able to detect both peaks but still not able to control the detectors block the way mentioned before.
the code and the data are attached.
Attachments:
eog peak detection.vi ‏192 KB

I'm not suggesting any of this as a model, and your needs are different than mine.
1) Go to Preferences -> Audio. Under "Default Audio Tracks", Set "Mono Media: Mono". Set "Stereo Media: Mono" (Choices from the pull-down for both are Use File, Mono, Stereo, 5.1, Adaptive)
You can change these, but I don't. I am using both mono and stereo tracks. I set up a custom sequence with the particular combination of stereo and mono tracks I want.
2) Set audio for clips by selecting all clips and going to Modify Clip -> Audio Channels Tab. Under "Number of Audio Tracks" there should be a "1". Under Channel Format it should read "Stereo".
I am not sending the audio to anyone else to edit further. I am doing a final stereo mix. If camera one is set up to record 2 mikes as a stereo track, then I leave that unchanged and put it onto a stereo track. If camera two is set up to record one mike onto channel 1 as ambient sound and channel 2 is a mono feed from a sound board, then I modify those clips as Preset Mono, 2 audio tracks, Channel format Mono, and that puts the left source channel (or whichever I choose) onto Audio track 1, channel 1 (of one), and right source channel onto audio track 2, channel 1.
4) Delete all the existing audio tracks in the sequence and replace them all with mono tracks, so all tracks in the sequence are mono.
I modify the tracks while creating the sequence, and ultimately use a custom sequence.
Under my Effects Controls panel there is only Channel Volume, and nowhere to adjust the pan.
I'm using the mixer, not the effects control panel.

I've just installed OS X to my old iMac. I'm trying to run a software update and it keeps failing mid update. any suggestions

I've just installed OS X to my old iMac, (early 08). I'm trying to run a software update and it keeps failing mid update. Message is that internet connection may have failed, retry.
I've tried several times and get the same error message.
any suggestions?

If you are connected via wifi is connecting via ethernet cable an option - at least just while you try to do the update?

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

HT1119 I recently purchased a brand new battery for my mac book pro and if I allow my computer to run out of charge and plug it in just moments later it can take up to 40 minutes to turn back on again!

Is anyone else having this problem? I rely on my computer heavily for work and school and this is just not acceptable! After paying $125 for a brand new battery I would have never expected these problems.

I'm sure that if you search hard enough, you'll find someone else who has had a similar problem, but that does not mean that it is remotely normal or common. Apple definitely needs to replace the machine, but don't be afraid that the same thing will happen with the new one.
Of course, that's assuming that this wasn't a case of user error. It's hard to understand how it could be, but in my years of tech support, I've learned to never discount such possibilities. I've seen people do things like forceably shove plugs into the wrong ports, seemingly oblivious to the fact that it doesn't fit and insistent that it should.

Airport and ISP

A power interuption appears to have changed some of my settings. I have an ibook and an old Power G3. Both laptops run OS X. The G3 is wired to the Airport, and the iBook is wireless. Problem: iBook wireless works OK, but the G3 says it can't find PPPoE. The system including DSL modem taken to Apple Genius Bar, and they say all OK. Just need correct ISP. ISP was no help.
Any suggestions appreciated. danjdanj

network configuration problem solved. All it took was time, but lots of it.

Arch computer freeze (probably somthing with kernel and broadcom-wl)

Finally switch to arch on my main computer but I do have one annoying problem outside of just normal configuration of system.
When using wireless "heavily" (basically download something of a couple MB or surfing the web for a little while) my computer completely freezes and there is no keyboard or mouse contol. I end up haveing to shutdown by holding the powerbutton. This started when I upgraded to 2.6.37 soon after the install. This problem does not happen when on kernel 2.6.34 or whatever was on the live cd. I am using the broadcom-wl driver from tha AUR ([14e4:4329] BCM4321 is my hardware). The last time I had the the crash I checked the everything log and the stuff in the log at the time it happened said this:
localhost kernel: wl 0000:08:6.0: PCI-DMA: Out of IOMMU space for 1876 bytes
Also I have tried total reinstalls, kernel from testing repositories, networkmangager, manually connect network. Also the problem doesn't seem to have anything to do with X because it happened before I installed X and happens in my root which does not have X.
If I down grade to kernel 2.6.34 or use wired the computer does not freeze but I would like to be using wireless and be current. The only thing I can think of right now to try is kernel 2.6.39-rc1 (I downloaded to test if wired would make computer freeze). The problem is I have never copiled a kernel and I don't want to screw up my computer even more.
Help would be greatly appreciated.
Last edited by Bageer (2011-04-04 23:01:49)

Hi! Two things:
First, if you plan on testing a newer kernel, try the kernel26-ck package from the AUR. It has the newest updates and is easily installed with whichever pacman wrapper you desire (I recommend Yaourt).
Second, I'd check everything in /var/log and dmesg to see if your system is producing any errors. I have a netbook using the wl driver and it work's fine, even when streaming and downloading vanila kernels/iso's. What's the chipset you have?

How does attribute change run works for Aggregates and Master data?

Hi
Can anybody xplain how does the attribute change run works for Master data ?
For e.g.
There is 0spelling and it has master data
On Day 1 there are 10 records
day 2 it has 12 records
so with attribute change run this 2 new records will get added....
The values for this 12 records will added seperately in Data load
Is this how it workss
So how about Aggregates which has Master data.????

for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works

What can i do my computer freezes when i use safari and word document?

My computer freezes when I am using Safari and word document. Can some help me??

The same thing just happened to my new ipod today while i was trying to use an app. A lot of people say that it is caused by an ios update, but I let the battery on my ipod drain until it turned off. Once i charged it, it turned on and is working normally again

HT6413 trying to download the new update for icloud update for windows and it keeps failing do we know why??

trying to download the icloud update for windows on my laptop and it keeps failing. please help???

Yes, I'm having this problem also and mistakenly uninstalled iCloud 3.1 thinking that this would resolve the problem....which it didn't. Now I'm without iCloud period and have been searching for the old version of 3.1 to reinstall to no avail, and it seems that many people are having the same problem. Does anyone have a link or download for iCloud 3.1?

Computer freezing run assist for airport and isp is failed

Similar Messages

Maybe you are looking for