Computer hangs after update to 10.6.8 Snow Leopard
After updating to 10.6.8, programs hang...the busy icon circles for 2-3 minutes when I try to do anything. Even when I try to access 'About this mac'.
In going through the suggestion to post the startup items, I came across a problem posted in Parallels website that Parallels 6.0 caused slow downs on the 10.6.8 system. I updated my Parallels application late last night to 7.0, as that was supposed to fix the slow-down, but it did not fix my computer. Still slowwwww when not in Safe Mode. I must use Safe Mode to even use my computer...
Here is a listing of the 'launchAgents', etc:
~/Library/LaunchAgents:
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
/Library/LaunchAgents:
com.adobe.CS4ServiceManager.plist
com.parallels.desktop.launch.plist
com.symantec.uiagent.application.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS4.plist
com.parallels.desktop.launchdaemon.plist
com.symantec.avscandaemon.plist
com.symantec.deepsight-extractor.plist
com.symantec.diskMountNotify.plist
com.symantec.MissedTasks.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-3.plist
com.symantec.Sched501-4.plist
com.symantec.sharedsettings.plist
com.symantec.symdaemon.plist
com.symantec.symSchedDaemon.plist
StartupItems:
ParallelsDesktopTransporter
Similar Messages
-
Desktop computer crashes after sleep mode since upgrade to Snow Leopard
Since I upgraded my power Mac to Snow Leopard in December, I've had nothing but problems, all of which appear to stem from when it comes out of sleep mode. This computer and all applications were rock solid in Leopard! I also have a mac book running identical programs and that IS rock solid on Snow Leopard. I have a 2 x 2.8 GHz Quad Core Intel Xeon processor with 10 GB ram.
I did a complete re-install of SL and all programs as per the Apple instructions.
Basically, the computer crashes after sleep mode. I've tried all the fixes I've read on the net. Here is the report thread from the last crash. Does it mean anything or throw any light on the problem to anyone?
Thanks,
David Wright
Interval Since Last Panic Report: 14 sec
Panics Since Last Report: 1
Anonymous UUID: A8309844-77B4-45E9-AB36-6AF2850B84A0
Tue Jan 19 13:01:16 2010
panic(cpu 4 caller 0x2a7ac2): Kernel trap at 0x8722a3a1, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x87e7a81c, EBX: 0x87e7a804, ECX: 0x10a2dd00, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x87e7a7a8, ESI: 0x000001f8, EDI: 0xffc21000
EFL: 0x00010202, EIP: 0x8722a3a1, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 4), Frame : Return Address (4 potential args on stack)
0x87e7a598 : 0x21b2bd (0x5cf868 0x87e7a5cc 0x223719 0x0)
0x87e7a5e8 : 0x2a7ac2 (0x591c30 0x8722a3a1 0xe 0x591dfa)
0x87e7a6c8 : 0x29d968 (0x87e7a6e0 0x246 0x87e7a7a8 0x8722a3a1)
0x87e7a6d8 : 0x8722a3a1 (0xe 0x48 0x10 0x290010)
0x87e7a7a8 : 0x8722f604 (0x10a2dd00 0x112e48c4 0x1 0x87e7a7e4)
0x87e7a838 : 0x8722ad60 (0x20d83400 0x10a2dd00 0x87e7a86f 0x0)
0x87e7a888 : 0x87306953 (0x10a2dd00 0x2 0x0 0xffffffff)
0x87e7a8e8 : 0x87789a40 (0x129f0d00 0xff91b80 0x1f8 0x2)
0x87e7a978 : 0x87788845 (0x6f40c004 0x12 0x7 0x2)
0x87e7aa48 : 0x87d92525 (0x159a3e00 0x30006 0x12493004 0x159a3e00)
0x87e7aa68 : 0x87d92413 (0x159a3e00 0x87d9e8a0 0x1 0x0)
0x87e7aa98 : 0x87d97df2 (0x159a3e00 0x12493000 0x5ac000 0x1)
0x87e7aad8 : 0x549661 (0x12493000 0x0 0x0 0x0)
0x87e7ab28 : 0x87d958d8 (0x10675f40 0x87d95df0 0x0 0x0)
0x87e7ab58 : 0x5638fc (0x12493000 0x87e7ab80 0x87e7ab84 0x87e7ab88)
0x87e7abd8 : 0x563c74 (0x11d8534c 0x12493000 0x20e35c90 0x0)
0x87e7ac28 : 0x564554 (0x12493000 0x3 0x87e7ac70 0x0)
0x87e7ad48 : 0x284797 (0x12493000 0x3 0x20e35c90 0x0)
0x87e7bdf8 : 0x21d65f (0x20e35c68 0x20c165a0 0x1fd2a0 0x5b17)
0x87e7be38 : 0x2107f7 (0x20e35c00 0x0 0x11434030 0x20e188f0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.RME.driver.FirefaceAudioDriver(2.64)@0x87785000->0x8778dfff
dependency: com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000->0x87da4fff
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x87cf7000
com.apple.driver.AppleFWOHCI(4.4.0)@0x87221000->0x87246fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x7dfa3000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000->0x8732ffff
BSD process name corresponding to current thread: QTKitServer
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 82873577512931
unloaded kexts:
com.apple.driver.AudioAUUC 1.0 (addr 0x878f1000, size 0x16384) - last unloaded 82669937654216
loaded kexts:
com.RME.driver.FirefaceAudioDriver 2.64 - last loaded 82552224025300
com.paceap.kext.pacesupport.snowleopard 5.7.2
tc.tctechnologies.driver.AlesisFirewire 6300
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.iokit.CHUDProf 214
com.apple.kext.ATIFramebuffer 6.0.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.ATIRadeonX2000 6.0.6
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AppleIntel8254XEthernet 2.1.1b7
com.apple.driver.AirPortBrcm43xx 421.91.26
com.apple.driver.AppleUSBDisplays 2.2
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.Apple_iSight 4.0.1
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 207
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.iokit.IONDRVSupport 2.0
com.apple.kext.ATI2600Controller 6.0.6
com.apple.kext.ATISupport 6.0.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.driver.AppleUSBHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.26)
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: ATI Radeon HD 2600, Display, Slot-1
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x912f, 0xfd500000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9221, 0xfd520000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd340000
USB Device: ProtectExecuter, 0x0819, 0x0101, 0xfd344000
USB Device: iLok, 0x088e, 0x5036, 0xfd343000
USB Device: MS-20 Controller, 0x0944, 0x0101, 0xfd341000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd310000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd313000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd312000
USB Device: USB2.0 Printer (Hi-speed), 0x04b8 (Seiko Epson Corp.), 0x0007, 0xfd200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
FireWire Device: Vendor 0xA35 Device 0x101800, 0xA35, Up to 400 Mb/sec
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknowndavidadmusic wrote:
The problem has been identified as the RME fireface400 audio driver. I've spent some considerable time experimenting to identify the culprit. It's clear that this is what is causing all my problems since Snow Leopard. Whether it's exclusively the drivers fault or partly also due to a conflict with apple SL, I don't know, but I have crash reports if apple want to see them.
From your first post, it appears you are using Fireface audio driver version 2.64. RME released a new Snow Leopard compatible driver (version 2.65) last December. It is available at RME: Downloads. (There is also a firmware updater for the Fireface 400 there, which you might want to check out.)
It isn't at all unusual for a new OS version to require new drivers for third party hardware. References to this can be found all over the web, in "read me" files & other documentation, etc. -- it doesn't just apply to OS X but to Windows & other OS's as well. (One of the biggest problems with Vista was poor third party driver support.) In fact, the X-Lab "Resolving Kernel Panics" article specifically cautions users to make sure all such drivers are current. See section 6.1 of that article for more details.
I don't know if you missed all this somehow, but if you haven't already downloaded & installed the new RME driver (& possibly the firmware update as well), then do so now. While you are at it, check for other similar updates for any other third party hardware devices you use, using the info in section 6.1 of the X-Lab article as a guide.
Hopefully, this will resolve your issue, which (as already mentioned) is kernel panics, not crashes. If you still have problems, post more about them, being mindful of the difference between application crashes & kernel panics. Because they are fundamentally different, they have different cures, so we will need to know which type they are to offer effective help. -
I can't open Aperture 1.5.6 after updating to 10.6.8/Snow Leopard
I can't open Aperture 1.5.6 after updating to my mac10.6.8/Snow Leopard. What should I do. I don't want to lose all my pictures.
This may sound like I am repeating Allan Eckerts advice, but what he wrote has spelling errors that seems confusing or contradictory.
Lpcap
As you did not backup your photos now at least copy the Aperture Library to an external device like a Hard drive or USB.
I don't know if Aperture 2 is still available for purchase, as Apple tends to discard older software so quickly.
Aperture 3 is now the latest,
Repost in the Aperture forum, for details on how you can best upgrade your Mac 10.6.8 OS to an Aperture version that will be able to rebuild your old library.
https://discussions.apple.com/community/professional_applications/aperture -
My iPhone 5 hanged after updating new software version
My iPhone 5 hanged after updating new software version
paulette3163 wrote:
When I plug my phone into my laptop and open itunes,
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
Iphone 4 keeps on hanging after updating to iOS 5.0 and later to iOS 5.1
My iphone 4 keeps on hanging after updating to iOS 5.0. I can no longer make and receive calls. If I am successful in making a call, it will never end even after pressing stop. The problem still persists even after updating to iOS 5.1. How do I resolve this problem?
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
My iphone 4 running on 6.1.3 has started hanging after updating to ios 7. The transition between the apps and the other features becomes quiet irritating and seems as if the screen is freezed with a quiet long lag in transistion as compared to ios 6.1.3.
Pl help..."My iphone 4 running on 6.1.3"
You mean your iPhone running on 7.0.3. -
[SIS Series] 661FM3-L Hang after updating ESCD
Hi guy!
My configuration
. 661FM3-L motherboard
. Intel Pentium 4 processor 630 3GHz, 800MHz FSB and 2Mb L2 cache
. RAM 512Mb 184Pin DDR-DIMM 400MHz no parity
. WD HD 40Gb
computer hang on Updating ESCD!!!
1. Bios see only 393Mb RAM
2. 1 beep on boot
3. see all correct peripheral
4 hang up
something to do?
Codebue Fabio>your board has an onboard vga card not a seperate one i assume
>it uses part of the ram and only the rest is for windows
ok I understood!
>you connected the monitor to the board
ya infact I can see all the boot process but hang on update ESCD
this are PCI devi listing
Bus.N. DeviceN. Func.N. Device IRQ
0 2 5 IDE Cntrlr 14
0 2 7 Multimedia device 10
0 3 0 USB 1.0/1.1 OHCI Cntlr 5
0 3 1 USB 1.0/1.1 OHCI Cntlr 10
0 3 2 USB 1.0/1.1 OHCI Cntlr 11
0 3 3 USB 2.0O EHCI Cntlr 9
0 5 0 RAI Cntlr 11
0 11 0 Network Cntlr 10
0 0 0 Display Cntlr 5
>did you load the o/s new on this board
no, but I try with another HD (SATA) clean... nothing todo
>not move the drive from an older pc with different chipset as its not going to work
I did !
sigh -
Migration assistant update for Mac OS X Snow Leopard
Hello -- I downloaded SNOW LEOPARD successfully that past week. I did a software update as well afterwards.
Now in preparation for upgrading to LION OS X, I read an article that mentions one must make sure to have the MIGRATION ASSISTANT UPDATE for Mac OS X Snow Leopard installed. I am unsure if this was included in the software updates I performed. One would assume it would be there. BUT there is not a detailed listing of what these combination updates include. HOW can I tell if I have the desired version required to continue on to LION?
Another suggestion was for one to perform FIRST AID on the start up disk. It only says to select your Mac HD and then to "verify" ..... do they mean to VERIFY DISK or VERIFY DISK PERMISSIONS. I have on occasion performed a REPAIR DISK PERMISSIONS but not the others mentioned. I do not know what the difference is?
THANK YOUI have the same console mesages repeating ad-nasium as you do. What is interesting is I do have the StartuoItems directory but it is empty. The problem I have is that the log-in window comes up as normal, but I can not type in it for about 5-8 seconds. This has started after the latest updates which you mention. Don't know if this issue is related or not. Have deleted the loginwindows and loginitems preferences to no effect.
-
Hi,
I want to know is it legal to using my personal AppStore account to update my office Mac OS(Snow Leopard) to Mountain Lion?This can be found at http://www.apple.com/legal/itunes/us/terms.html#APPS
MAC APP STORE PRODUCT USAGE RULES
Except as otherwise set forth herein,
If you are an individual acting in your personal capacity, you may download and use an application from the Mac App Store (“Mac App Store Product”) for personal, non-commercial use on any Apple-branded products running Mac OS X (“Mac Computer”) that you own or control.
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use a Mac App Store Product on a single Mac Computer located at a resource center or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate license.
(iii) Use may require sign-in with the Apple ID used to download the Mac App Store Product from the Mac App Store. Mac App Store Products can be updated through the Mac App Store only. -
Can I back up computer with time machine on lion then reinstall snow leopard and restore from backup safely?
If your machine came with Snow Leopard or earlier and you have your install disks, yes, you can reinstall SL. However, you will need to erase the entire hard drive so you will lose all your files. Also note that there are some apps (such as Mail) which can't be downgraded "automatically" such as with a restore from Time Machine. Here is some info on TM:
http://pondini.org/TM/14.html -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
AFTER UPGRADING TO MAC OS X SNOW LEOPARD I CANNOT USE IPHOTO SLIDE SHOW. WHAT HAS HAPPENED?
AFTER UPGRADING TO MAC OS X SNOW LEOPARD I CANNOT USE IPHOTO SLIDE SHOW. WHAT HAS HAPPENED?
-
HT1338 how do I update 10.5.8 to snow leopard?
how do I update 10.5.8 to snow leopard? where can I buy?
Leopard 10.5.8 is as far as you can on a G5 iMac. Snow leopard requires an Intel mac.
-
Can I update 10.3.9 to Snow Leopard?
Can I update 10.3.9 to Snow Leopard?
Yes. See this similar question. https://discussions.apple.com/message/15384841#15384841
Cheers, Tom -
Update Version 10.6 to Snow Leopard.
I am trying to update Version 10.6 to Snow Leopard. I keep getting this error messages 'The Software Update Server (192.168.16.6) is not responding.’
I have tried changing the IP address based on another suggestion to a similar problem but I keep getting the same messages with the same IP address. Would you have an idea of how I can change the IP or which address would enable me to download?
Maybe you are looking for
-
My computer had been wanting to do a software update, with what I believe was the Mavericks Software, for a few weeks but I had been putting it off. When I finally decided to install the update onto my Macbook Pro 15" today, my screen went completely
-
Changing name in Org structure - central person
Hello All, I have got request for name change in SRM. So, i have changed the name details in SU01 and it is not reflecting at central person. I even tried to edit but it was of no use. Could you please help me on changing the name at central person i
-
I updated some pages on my iWeb program, then clicked "Publish Site." All looked well, but when I visited my website, no changes showed up. This is a new problem; I've been using iWeb with no problems for a couple of years. Any ideas?
-
Use of Bind variables on Transparent Gateway
Are there any known issues of using bind variables with queries using the Transparent Gateway? I've included two queries that access data from V_PERSON (alias r) which is a SQL Server 2000 table. We're using TG for MSQL 9.0.1 and calling from an Orac
-
Embedded drag and drop not working
Hi, Hoping someone can help as have got 90% of the way through a project and hit a wall at the final (end-of-level-baddie) problem. I'm currently embedding old AS2 activities (build by a second party - now not operating/contactable) into a new AS3 me