Computer image shows up on screen as 16 images
Recently when I transfer my images from my Sony DSC-H1 Cyber-shot camera to my computer they appear normal until I click on them to enlarge them to full screen. Then, instead of one image, I get 16. I know I have changed a setting inadvertently, but I don't know which one.
Hi xausa,
It seems that your camera is set to Multi Burst Mode.
To deactivate that feature, Set the mode dial to the (camera) icon.
You may also find this link helpful (page 34).
If my post answers your question, please mark it as "Accept as Solution".
Thanks. -Anthony
Similar Messages
-
MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS
Hi,
First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
You can restore your system to a previous point or perform a startup repair, please refer to the following link:
What to do if Windows won't start correctly
http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
Yolanda Zhu
TechNet Community Support -
Last night my computer started showing a gray screen
Last night my computer started showing grey screen and a picture of the Apply logo, when I went to the OS C utilities screen it sad that part of my hard drive is bad how did that I happened I have had the computer less than 6 months. And how do I format it.
Open Disk Utility in your Utilities folder. Select the HDD on the left column, select 'First Aid' and engage 'Verify Disk' and 'Repair disk'. If indicated, engage 'Permissions'. See if that solves your HDD problem.
Ciao. -
My computer keeps showing a blue screen everytime i get online and says memory dumping error
what should i do when my cpu keeps turning off everytime i turn it on and go online. plus their will be a bunch of pop ups that just open up without my permision
Hello gsxbilly750:
Welcome to HP's forum and malware / virus world oh what fun. First thing is to get your comperter in safe mode. Seeing it has start up issue already I dought if F-8 key will work. So we will do a fource shut down. Turn on your computer let it go to Windows screen then just disconect the power cord from power supply box. Whait until your computer is completely shut down. Now reconnect the power cord and turn on your computer. Use your arrow keys and select safe mode with net working. If this just started happening yesterday then open up Recovery Manager and Select Microsoft System Restore. Click yes in white box click next eventually you will get to a date list choose a date before this happened click next. Let it complete system restore. This is will fix your issue some times. Depends on how much damage was done by malware or virus. If to much damage was done then you need to do a complete system restore. With blue screen of deaf you might have to. Follow the same steps above but select System Factory Restore.
If you prefer to try cleaning your computer with out doing systems restore. You first need to download Malwarebytes http://www.malwarebytes.org/lp/malware_lp/?utm_source=adcenter&utm_medium=cpc&utm_term=malwarebytes%... Ounce downloaded the trial verson. Type in services in All program search box and open services. Look for your Anti Virus software in list you need to change it from start to stop. Do not close out service window leave it opened. Now open up Malwarebytes and run the scan. Ounce scan is done click fix or delete effections. Then ounce that has been completed you need to uninstall Malwarebytes. Malwarebytes is unistalled. Go to Services window and find your Anti virus software and change it back to start. Close out services window now. Open your Internet Explorer Browser goto tools select Internet Options . Click on Advance tab. Click reset. Close out Internet Explorer and reopen it goto tools again select Internet Options now check mark box delete on exit . Click on Advance tab go down the list and check mark box under securty section Epmty Temporary Files when browser is closed. click ok. Then click on tool and select Managed Add ons then enable your tool bars ones that you realy need. This now has fixed your Internet Explorer issue. Ounce you fixed these issues reboot your computer.
If you are still having troubles with bl7e screen Let us know. Thank you frrw. -
I tried a safe reboot my computer had a grey screen and a spinning gear. Safe boot did not fix the problem.
The last writing on the safe boot said " Launch_msg(): Socket is not connected.
Tried re starting and same grey screen and spinning gearCan you boot to the Snow Leopard DVD?
-
HT3910 Computer just shows apple icon screen and beeps with 3 beep intervals
Called apple support they sent me a link via email how to erase and reinstall-snow leopard 10.1.6
But when i do the procedure it starts and stays on the apple icon screen and beeps in 3 beep intervals thats as far as it goesLocate the install instructions for your particular iMac on http://eshop.macsales.com/installvideos/
Remove each DIMM and then re-install per the instructions. -
Skype Video Calling only showing a black screen
Hi,
When I make a viseo call, my computer only shows a black screen. The other person can see me just fine, but my video show just a blank screen. It's definitely a problem on my computer as it has happened with a couple of different people.
Both screens that should be showing video (the one that shows them, and the one that shows me) are showing black.
I've had a look around but haven't been able to find any solutions.
Any help would be much appreciated.
thanks
Solved!
Go to Solution.Most likely the issue is with your display adapter.
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
I upgrade my ssd for my macbook pro retina from the 256 to 480 GB but when I tunr it on or restarted the computer the gray screen that is suppost to apper dosent show insted a screen with lettler show before the login screen besides that the computer works fine.
I cannot decipher what is written on the images you have posted but they are reminiscent of what I have seen when a MBP is dealing with some totally incompatible software or perhaps in your case hardware.
How and or who installed the larger SSD and what manufacture is it. I suspect that is the problem.
Ciao. -
Brand new Ipod touch. We attached to the computer because we don't have wifi. Now what? We set up in ID in itunes. The Ipod won't do anything, just shows itunes on screen but won't budge.
To get iTunes to see your iPod:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My car was broken into in Uptown, MN last month and my Macbook was stolen along with my Wifi device. Although my computer would no longer power, it showed a white screen with a folder and question in the middle and then shut down. I hadn't had a chance to take it to have it checked, but is there a way to track my computer if I do not have the serial number? And if I purchase another computer is there a way to get the music that I purchased in iTunes back?
ThanksRegarding your music, yes you can download it again at no cost. Launch iTunes on the new computer, and sign in to your account using the same Apple ID you used previously. Go to the iTunes Store. On the right side under Quick Links select Purchased. Click on All Songs in the upper left.You'll see a list of the music you purchased from iTunes. In the lower right corner click the Download All link. Note that this may take a long time, particularly if you have a lot of songs. Use the fastest Internet connection that you can.
About the computer, unless tracking software was already installed on it and turned on there is no way to track it.
I would suggest changing passwords of any accounts that you have on the computer, such as email. If you have any credit card information stored on the computer, have them cancelled and replaced immediately.
Sorry to hear about your loss. It is very distressing, I know.
Best of luck. -
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.
Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.
-
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u
Option 1
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play. I've tried reloading it with no success
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen? My son was trying to update now it must go to restore. HELP!
If there is no backup of the device to iCloud or iTunes and the device has gone into recovery mode when trying to update, then the data is gone. If the device was connected to iTunes to do the update originally, it is possible the default backup was done, unless your son disabled it. To check to see if there is a backup, go in iTunes, click on Edit, Preferences, Devices and see if there is a backup listed for the date/time before the update was started. If he was doing the update OTA on the phone, then there is no backup. No backup, no photos.
-
My computer shows a blank screen and a question mark in a folder when I turn it on
my computer shows a blank screen with a folder and a question mark in it I wonder what is wrong with it?
this means that the computer can not find the operating system on the hard drive. try booting the computer from the disc it came with.
-
How do I get my whole picture to show on the screen where I can see the entire image?
How do I get my whole picture to show on the screen where I can see the whole image?
Hi & welcome to the forum.
We need more details to be able to help you. Can you please explain your situation in a bit more detail?
Also, please let us know what version of Photoshop you have and what OS you're running.
-ST
Maybe you are looking for
-
Not syncing to itunes. Iphone 4 or Ipod
not syncing to itunes. Iphone 4 or Ipod
-
Internal speakers no longer available under 10.4.8
After I updated to 10.4.8, my computer seemed fine, and I was able to play sound, until I restarted it. Now it doesn't regonize my internal speakers. When I try to play anything, the red light in the sound out jack comes on. (any there is sound if I
-
Mounting a mid 2007 24" imac on the wall
I want to use my 24"(mid 2007) as my main TV, i have found the apple vesa adapter kit to allow me to mount it on the wall, but am unsure how easy it is to remove the stand. Can the stand be removed from all 24" imacs or only the more recent ones. Any
-
At line-selection & at user-command event issue
hi i am working on a interactive report,with at line & at user command event,on list 3 i have used a pf status,to trigger the at user command event,till that i was working with at line selection,which are working fine,but on list 3,i am able to see m
-
Hi All, I'm trying to set the JMSPriority on a message to 7. I know that you have to use the MessageProducer class but I can't get it to work correctly for me. Once I create the producer and set the priority, I then can't send the message. Here's my