Computer ip address when using airport

I need to provide TIVO with my computer ip address to access photos. I am using wireless for the TIVO and my computer with airport. I know the airport IP address but that doesn't work for TIVO. I tried to find the computer IP under system Pref. network and under utility network but no luck. I am using sys 10.6.4

Terrance Turner1 wrote:
I need to provide TIVO with my computer ip address to access photos. I am using wireless for the TIVO and my computer with airport. I know the airport IP address but that doesn't work for TIVO. I tried to find the computer IP under system Pref. network and under utility network but no luck. I am using sys 10.6.4
Welcome to Apple's discussion groups.
If you open the Network panel of System Preferences and select the connection item you're using, you should see your computer's IP address on the right. If that's not what you need, please try again to describe it.

Similar Messages

Airport Extreme: Internet working when directly from modem to computer, but not when using airport extreme. i have hit the reset pin and now do not know what to do.

Using Airport Extreme:
- Internet working when directly from modem to computer
- Internet NOT working when modem is connected to AE
- Internet NOT working when modem is connected to AE and AE is connected to computer
- I have hit the reset pin
Now what do I do?
(in advance - lots of love to anyone who helps out)

What sort of Internet connection do you have and who is your Internet Service Provider?
What is the make and model number of your modem?

Change sender address when use function SO_NEW_DOCUMENT_SEND_API1

The requirement need change the sender address when use function SO_NEW_DOCUMENT_SEND_API1.
for example,the fixed sender is '[email protected]'. how to change the sender address. could you please
provide a instance?

Hi 莫言，
As explained in mail home wiki here, this function module is obsolete and complex to use, please use CL_BCS instead. You can find lots of example there. And it is pretty easy to change sender address using CL_BCS instead.
Best regards,
Jerry

Is there any way to stop the delay between different sets of speakers when using airport express?

Is there any way to stop the delay between different sets of speakers when using airport express?

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Certain web address not available when using Airport Extreme Base Station

Hello. To access my "secure" account at the local library, I must use a web address that contains a colon followed by a number. I believe that this is a port number, but I confess that all the discussions here regarding ports are going well over my head, and I may be incorrect with this assumption.
My problem is that while I CAN access this site by connecting to my DSL router directly via ethernet cable from my iMac G5, I cannot access the site when connecting to the internet in the mode: iMac Airport to Airport Extreme Base Station to DSL router via ethernet.
The format of the web address is: http://xxxx.yyyy.net:####/zzzzz/, where #### is the number I guess may be specifying a port and causing my problem.
Can anyone advise me, in simple terms, how to get to this address when in the Airport--internet connection mode? Will the solution have any adverse side effects?
Regards and Thanks
iMac G5, 2.5 year old AEBS Mac OS X (10.3.9) Westell 327W 4-port DSL Modem, not using wireless feature.

Very likely the embedded firewall that comes with your AirPort blocks the port you are trying to use.
In order to solve this, best way is to modify the AirPort settings (open the AirPort maintenance app):
Click at the tab "port forwarding" and add the desired port as "public port" to the list. "private IP" is the IP of your Mac and for "private port" type in the port number again.
If you are unsure about the IP of your Mac, look at the network maintenance application.
Well, one side-effect is that you have an open port in your configuration which could cause security issues... but only if you are paranoid So there is nothing to care about (note that without the AirPort inbetween your Mac and your modem, this port would be not blocked and freely accessible

Shared PC stuff dissappears when using Airport anything.

I have a cable modem hooked to a Linksys router and switch. Several PC's sharing disks and printers are hooked to the switch. When I plug my Mac directly into the switch it 'sees' the shared disks on the PC's but not the printer (another topic). When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys? I swear I'm a dummy at this.
I love my new Macbook Pro, but there are still a few things to do.
1. Can see shared pc drives but not if using Airport Extreme or Express to connect to my home network.
2. USB drive works only when plugged into Mac. Not when plugged into PC or Airport Extreme.
3. Shared printers on the PC's can't be found by the Mac no matter what I try.
Maybe this isn't all for this topic, but then again, maybe they are related.
Mac newbie, MissMyApple][+ (it's in a box in the attic)
Thanks in advance for any help.

When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys?
In this network configuration, you, effectively, have two routers, the Linksys and the AEBS...which will create two networks, and why your Mac can't "see" the PCs. To fix this, you just need to set up the AEBS as a bridge so that it acts like a wireless access point.
To set up the AEBS as a bridge, temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBS, and then, using the AirPort Utility (found in /Applications/Utilities), make these settings:
Internet - Internet Connection tab
- Connection Sharing: Act as a bridge
- Click Update to apply the new settings.

Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

Thanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

Computer shutting down when using iTunes

Everytime I try to download/update something via iTunes, my computer completely shuts off. It has never done this before and only happens when using iTunes.
Any thoughts or suggestions?

Not to suggest the obvious, but have you updated and run your Malware/spyware software lately? If you don't have one, ewido.com has a free trial, and it's fantastic.
This is the easiest thing to try, so if this doesn't work, post back and we'll try to make some other suggestions...
Good luck!

Computer shuts off when using Firefox.

When using Firefox on my XP machine, the computer shuts down while on the Internet at random. I removed FF and reinstalled it, and it still shuts my computer down while on the net. I swap over to IE and there is no problems so it's in the Firefox program. Did not do this until a few weeks ago. HELP

I had this same problem, searched the net, got frustrated, but finally worked it out. If I used Mozilla my computer running Xp would shut off, if I used IE I could surf the web. However flash was not working on Youtube. In the end the problem was simply that my version of Adobe Flash was not the current one, this was causing a software conflict, which in turn was shutting down my computer while running firefox. I simply went to the Adobe site, and updated to the latest Flash, and also downloaded a debugger program for IE. Since then everything is ok, Mozilla no longer turns off my computer, and IE8 works fine with Youtube.
Hope this helps, as it sure frustrated me at the time.

My computer locks up when using Firefox

When using Firefox my computer periodically locks up. My screen goes blank and everything is unresponsive. I have to to a hard reboot to get my computer back up. I'm using a 64 bit version of Windows 7 and I have the latest version of Firefox installed. I typically don't use any of the plug-ins.

Ever since I downloaded v12, my computer has been locking up at least twice a DAY. I have uninstalled and reinstalled everything, including Firefox itself, as well as Adobe, and all the plug-ins associated with the application. I've run Spybot, C-Cleaner, and my anti-virus to confirm that there's nothing else wrong with the computer outside Firefox. If the computer is rebooted and Firefox is not opened, the system is fine. But once Firefox has been opened - even if it survives the session and I close Firefox - the computer is about 75% likely to lock up, requiring a hard reboot. I'm running Vista Home edition (32 bit). If anyone has a clue what might help stop this - because I'm quite sure that it's not healthy for my computer to be hard rebooted twice (or more) a day - I'd love to hear it! It's getting waaaay more than annoying, enough so that I'm ready to move to another browser to stop the problem.

When using airport express with magic jack it disconnects when i use the phone.

When the airport express is used with magic jack it disconnects internet service when i use the phone. That is with incomming or out going calls.

I went through that very same issue with two of my Samsung phones. ....my problem turned out to be corrupted files within my 1st phone programming due to a bad OS update
The second phone issue occurred because my phones data became corrupted by a mild virus therefore it was necessary in both cases to replace the phones. ..
But, there is also a third option, try removing any recent apps you've added then turn your phone off and back on to refresh
Or try doing a factory rese, I know I realize how frustrating these are but, in some cases it fixes the issue without additional challenges. ..
You should also add the Verizon protection and security app to your phone to prevent virus and other such problems from affecting your phone going forward. ...
The best thing about this app aside from its protection is that it also enables the user to easily save and transfer their phone content between phones and backs everything up to a minimum of 25GB of the cloud
But, you also need to turn your android phone off at least once every 3-days to maintain a good connection to the Verizon network

Capturing computer screen action when using PhotoShop

How can I capture instructional "footage" from the screen when using/demonstrating PhotoShop? I'd like action video (yes, seeing the cursor moving) - not just capturing a still of the screen.
Thanks!
Deb
iMac Intel Mac OS X (10.4.7)

Depends on your need for resolution and post production manipulation like zooms and highlights. You need patience to use SnapZ.
The big dogs like Total Training use expensive scan convertors from outfits like LyonLamb.
Us little doggies just shoot the screen with a good camera.
bogiesan

D I need the firewall on in my Mac when using Airport extreme base station?

Hi all;
Just wondering if it's necessary to turn on the firewall in my Mac when using the AEBS.
AEBS is connected to the net and then my Mac connects to AEBS.
There's already a firewall built-in as I understand it.
Thanks.

The operation of NAT and DHCP on the AEBS will prevent someone from the Internet directly accessing your Mac.
Enabling the firewall on your Mac would add some protection against someone local wirelessly accessing your Mac.

Airport Time capsule not found on mac when using AirPort Utility

I just purchased an AirPort Time Capsule to back up my files from my Mac. I have been able to set up the wireless portion, but when trying to access the backup portion through TimeMachine I cannot select my base. I am able to see it on my iPhone, but not on Mac. I have updated everything. Is this a known problem with the transition to Yosemite? Any suggestions?

Dead spot on.. Yosemite is pain plus..
I recommend you start over in your TC setup..
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.

Kernel Panics (AFPFS) when using airport discs AND user switching!

Ok,
I would love to see if anyone else has had this happen;
I can replicate this on 2 Mac Pro's we use:
We have airports discs (in accounts mode) connected, all works fine. However, IF one user does not log out, and another logs on (user switching) we will invariably get a Kernel Panic after some time (sometimes when putting to sleep or logging on, sometimes 'just'. This has not happened when airport discs are NOT MOUNTED, or befure using them (we are using the latest, just-updated software patch). Any suggestions?
The Panic log (with the memory dump removed) is below:
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000004, CR3: 0x00e87000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x486eb2b4, ECX: 0x00000000, EDX: 0x0000010c
CR2: 0x00000004, EBP: 0x486eb3c8, ESI: 0x486eb4fc, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x5fe0d9ef, CS: 0x00000008, DS: 0x074c0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.afpfs(8.0.9)@0x5fddd000
Cheersm
Dan

I don't have any solutions, but I had been reading about some folks having airport related kernel panics in the MacBook discussion forum. As a matter of fact, I had a kernel panic a little while back on my MacBook, and the crash log pointed to some issues with airport drivers. Here is what Macfixit says about these drivers and I quote:
"Bad built-in hardware (including hard drives) Repeated kernel panics can be the result of incompatible, damaged or misconfigured built-in hardware. This includes built in AirPort, Bluetooth and other networking hardware, corrupt or damaged hard drives, faulty processors and more. Examine your crash log (as discussed in our tutorial "An introduction to reading Mac OS X crash reports") for clues as to which device is implicated.
Sometimes the fix is as simple as re-seating built-in hardware. Make sure any PCI, PCI Express, AirPort and other expansion-type hardware is firmly and properly seated in its appropriate port.
In other cases, the fix involves attacking the problem at a driver or kernel extension level. Again, examine your crash reports and look for components specifically linked to certain hardware. For instance, the following Mac OS X components are all used by Apple AirPort hardware, and can be implicated (by crash logs) in kernel panics:
com.apple.driver.AirPortAtheros5424(100.21)
com.apple.iokit.IONetworkingFamily(1.5.0)
com.apple.iokit.IOPCIFamily(1.9)
com.apple.iokit.IO80211Family(110.19)
After determining device-specific components, you can try re-installing them -- either by performing an "Archive and Install" of Mac OS X, or downloading and manually placing items."
http://www.macfixit.com/article.php?story=20060911080447777

Computer ip address when using airport

Similar Messages

Maybe you are looking for