Computer lock up all the time the machine is only 2 months ole

pices of crat paid over 500 for the desktop

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

    I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential  files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

    You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
    If that sends a message, please note the exact wording.

  • My yahoo email locks up all the time now.

    My yahoo email locks up all the time now.  I have to force reload every time. I receive and send emails OK.  I have the same problems on another Mac with older OS and still same problem.  I recently upgraded it to Lion and the problem still exists.  It started 4-6 weeks ago and has progressivley gotten worse.  I've had yahoo email for years now but am considering dropping this email account if it's not soon fixed.  Thanks for any input...

    Very possibly your iPod is faulty. Is it new, or has it ever worked correctly?
    Before you think about sending it off for service, have you tried restoring it?

  • HOW DO I KEEP MY VOLUME BUTTON FROM LOCKING UP ALL THE TIME?

    HOW DO I KEEP MY VOLUME BUTTON FROM LOCKING UP ALL THE TIME? I UNDID IT ONCE BEFORE BUT CAN'T KEEP IT FROM HAPPENING.

    Cajuntwin2
    *Tip: ALL CAPS = SHOUTING*
    You don't tell us what year model MBP you have. Also, there is no such thing as iOS 10.9.5, but there is Mac OS X 10.9.5 Mavericks. In addition to that, tell what you mean exactly by "... locking up all the time..." and What you Did exactly when you "... undid it once before..."
    ÇÇÇ

  • Thunderbird locks up all the time and I have restarted with add ons disabled. SOLVED: caused by McAfee

    locks up all the time
    I have restarted with add ons disabled and still locks up.
    want to uninstall and wipe it clean (no account info, old emails, Etc.)
    I have backed up file
    Thanks,
    Bill

    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

  • Can I enable the root user account from the log in screen when I am locked out of the machine?

    Hello everyone,
    I am working on my friends mac to get it ready to sell. I went into the advanced options of the user and changed the name of the account. That's all I changed. I did read the warning that said if anything was changed it could cause damage, that's why I only changed the name of the user account. I didn't want to mess with anything else. Well, needless to say, I am locked out of the machine. Apparently the root user, system administrator, account was not enabled and I am stuck at the screen that I can get to with my installation disc. So how can I enable the root user account and get back onto the machine from the screen I am at? Can I enable the root user from terminal? I spent a good 8 hours yesterday researching this topic and have come up empty. Changing passwords from commands in terminal is not the problem. I am given just one account to choose from to log on and it's not accepting the password because of the changes I made in the advanced options menu.
    Is there any hope of getting this thing going again? Or have I just screwed myself over?
    Thanks for your help!
    Leah

    You can reset the password.
    http://pondini.org/OSX/Password.html
    Do you need to recover data from it before you sell it?  If not you can just wipe the disk and prepare it for sale.
    See  > Apple What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
    Also See Thomas Reed's How to Prepare your Mac for sale
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    and this thread
    https://discussions.apple.com/thread/5474062?tstart=0

  • My old computer crashed and i just purchased a new laptop. How do i get my library on my new computer without erasing all the songs on my ipod?

    ?

    damfam9 wrote:
    My old computer crashed and i just purchased a new laptop. How do i get my library on my new computer without erasing all the songs on my ipod?
    If ALL your music is on the iPod and it's ALL iTunes purchased content, you log into iTunes with your account on th enew machine and reverse sycn the music back.
    If the music is from cd's and other sources (not iTunes files) then ask over at iLounge what third party solution currently works. (can't recommond it here)
    I have some HUGE instructions here how to get your music off the old comptuer too:
    Recovery options:
    A: If Windows isn't booting:
    You need to boot the computer from a "recovery disk or USB" that has a operating system on it and a graphical user interface to transfer files from your boot drive to a external drive.
    I suggest using the Easy USB Installer to install Ubuntu 10.10 onto a 2-4 GB USB key.
    http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
    or
    burn a ISO of Ubuntu 10.10 or PartedMagic to a cd-r with ImgBurn or Win 7 right click and burn
    You can use Disk Utility in OS X to select the ISO and burn to cd/dvd as well.
    Once you have it installed, consult this page for your BIOS boot key to hold to get into the BIOS.
    http://pcsupport.about.com/od/fixtheproblem/a/biosaccess_pc.htm
    Plug the USB into the back (if possible) of the computer, connect the external drive and enter the BIOS, set the USB (or CD) as first boot and SAVE.
    Boot off the USB/CD and "Try Ubuntu/Run from disk" DON'T INSTALL. (Parted Magic loads into RAM and ejects CD)
    Once in, go under the menu Places > Computer and transfer your files to the external drive just like you would in Windows, drag and drop.
    (If using Parted Magic double click on the Mount Drive left icon twice, use the two GUI windows to transfer files to external drive, unmount drives, log out/quit in the lower left corner menu option)
    B: If the computer hardware isn't working, but the drive might still work:
    You'll have to remove the power cord and manually extract the hard drive. This might result in some damage.
    There is a powered IDE/SATA to USB adapter for sale online for $20 that you can take that internal hard drive and use it like a external drive to access your files from another Windows machine.
    C: If your iTunes content is deleted...
    It might be recoverable if it hasn't been overwritten yet by fresh data. Undelete software works by reading the 1's and 0's of the files themselves, not what the OS says.
    You need to use undelete software pre-installed before the iTunes content was deleted, or while on a bootable cd/USB and a external drive to transfer the recovered files.
    You can also install undelete type software on a new machine and USE STEP B above to "undelete" the files and recover them directly to the new computer.
    You can't install undelete software or recover files to the same drive your attempting to recover from or it overwrites the deleted data.
    D: If the hard drive doesn't work and...
    The data isn't worth spending $2000-$3000 in a ATTEMPT at platter dissection recovery, then your finished
    If the data on the drive was encrypted, data recovery efforts may be futile, unless it's a encypted file and you transfer it successfuly and have the password to de-crypt it.
    E: If you have a "iDevice" with any content
    It can be synced back into iTunes, check at iLounge what third party software works reliably now and for your version.
    (Once you log into your iTunes account, you can sync ONLY iTunes purchased content back from a iDevice)
    Third party software can recover just about all the items on a iDevice, regardless of it's origin. (can't recommend such software here)
    F: If any of the above is too hard, or the data is of "critical importance"
    Then seek professional computer or forensic level recovery services.
    Get help from someone who has done this sort of thing repeatly and can almost guaranty 100% results.
    There is Linux software that can "rip" all data off a iOS device if that level of attention is needed, seek a professional service.
    Hope this helps in your data recovery efforts.
    Please, backup your data, it's the only thing us IT professionals can't recover.

  • Currently using Lightroom 5 as a standalone on a mac and two windows machines one desktop one laptop. with CC can i still use all the machines or do i have to take out an individual license for each?

    with CC can i still use all the machines or do i have to take out an individual license for each?

    Your LR5 license allows for activated installations on two machines.  Of those two machine, only one can be using the licensed software at a given time.  The same applies with CC, except with CC you won't be able to sneak in the third machine.  What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
    If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement.

  • We wish to keep a spare computer loaded with all the required editing software ready to swap out if we have a hardware issue, what can we do about licensing, can we hot desk to it?

    We wish to keep a spare computer loaded with all the required editing software ready to swap out if we have a hardware issues. What can we do about licensing, can users hot desk to it? We have about 10 users with various software packages loaded on their current machines. Currently if one goes wrong we have no backup.

    You will need to check the licensing requirements for the various software & operating systems that you use.
    A much simpler way will be to make a clone of each machines hard disk drives on seperate external bootable drives using Carbon Copy Cloner or Superduper. You can then keep a couple of blank machines and boot from the an external drive in an emergency and carry on working. At the end of the work day you can then restore the clone to the internal hard drive of the affected machine, and leave it to run over night to complete the restore.
    This method would probably be the cheapest way to implement a disaster recovery option as you will not need to pay for new licenses or 10 new machines.
    Just make sure that each machine has an external HDD attached and a regular clone being made on a schedule, this way you will always have an up to date clone to work from.
    There are many ways to acheive what you require, NAS etc.
    Jerry

  • When using office for mac or i studio after inserting several pictures, my computer locks up and the only way I can fix it is to do a force quit.  Why does it do this and how I I get it fixed without a force quit?

    I have a mac book, with office for mac and iStudio installed.  When I try to create a document using either one of these; after inserting several photos, the computer locks up and the only way I can get it to unlock is to do a force quit.  Why does it do this, and how can I get it to unlock without having to do a force quit?

    Are you using versions of the software that are compatible with the version of OS X you have installed? Very often such lockups are caused by application incompatibility.
    The problem may also come from trying to use both sets of applications at the same time while not having enough RAM installed. Adding more RAM may fix the problem.
    The problem can arise from corrupted support files such as preference files or Application Support files or corrupted cache files.
    The image files you are using may also be corrupt thus causing the problem.
    You might start with:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.

  • My ipod is linked to the family computer. i just took a bunch of cd's to work and downloaded them onto my itunes account but when i went to plug in my ipod to my work computer it says all the songs on my ipod would be lost.

    how do i free myself from my family computer, keep my music and then hook upto my work computer to download all the songs into my ipod that I downloaded from my cd's?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I synced my iphone 5 with my computer and save all the photos to my phone through itunes. i restored my mac and lost all my photos on the mac but i still have them on my phone. how do i get them on my new mac now?

    i synced my iphone 5 with my computer and save all the photos to my phone through itunes. i restored my mac and lost all my photos on the mac but i still have them on my phone. how do i get them on my new mac now?

    how do i get them on my new mac now?
    Be careful, when you connect the iPhone to your mac, unless you have saved the photos. Synced photos may easily  be accidentally deleted by syncing again. And do not enable iCloud Photo  Library (Beta), that will erase synced photos as well.  Synced Photos are not included in the device backups.
    Set your iTunes Preferences to "Devices > Prevent iPos, iPhones, iPads from syncing automatically".  Otherwise iTunes may launch and sync your iPhone with an empty iPhoto library the moment you connect it.
    Unfortunately, it is not possible to sync the synced photos back. Apple recommends to mail them back, but that would be a lot of clicking (iTunes: Syncing photos - Apple Support). You could also share them to a Shared Album, but a third party app like TD recommended, will be better.

  • How can I get IP and hots names of all the machines.....

    I need to get the IP addresses and host names of all the machines in my netowrk and need to select only is a HP / Compaq x86 machines finaly.
    If you know atleast a part of this please help me.
    [email protected]

    You coulduse the broadcast address (x.x.x.255) in an ICMP sweep to determine which hosts are alive (and accepting ICMP).
    But no, there's not a single (and definitive / sure) way to retrieve all IP addresses.

  • How can I sync with a new computer without lost all the info?, the old one was stolen.

    How can I sync with a new computer without lost all the info?

    See Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Maybe you are looking for

  • Best Practice - Public VLAN

    Looking for a best practice document for providing a secure, public access/internet only VLAN for both wired, and wireless. Need to provide additional secure access WLAN as well.

  • Parameter reports

    HI In report builder am creating paramters.for that i have taken EMP table from Scott user in deptnum am displaying distinct deptno.if i select dept 10 ,empnum drop down should display empno's of deptno 10..if i select dept 20, empnum drop down shoul

  • Reverse the confirmation

    Hi All, How can i change the specific Order Type for the purchase order as the default one. instead of the standard one given by sap , system should pick custum one as default. While tying to convert the PR to PO in the ME59 , system pick the sap sta

  • JAI Mosaic from URL

    Hello, I create some RenderedImages from URLs (JAI.create("url", new URL(url))) and I mosaic them using the code bellow. The input files are RGB JPEGs. The result mosaic has unfortunatelly wrong colors. But if I save first the images on the disk ( JA

  • Sending photo of flex to java

    I have a variable in the flex-type byte array. I send this variable to java through RemoteObject (BlazeDS), but do not know what type the variable should be the parameter passed to the java. Has anyone worked with picture between flex and java shooti