Computer not being registered in DNS on Westell 9100EM
I have a Westell 9100EM in my office where some systems register in the DNS and some not. All the systems are in the connections page. All Three PCs are Windows XP, 2 have no problem, just one. I have tired ipconfig /release, ipconfig /renew and ipconfig /registerdns in that order, checking the Westell DNS each time, no change. The two printers register no problem, my D-Link NAS registers. I just need to get this last PC to register. I have compared TCPIP properties, all 3 XP systems are the same. Any ideas?
This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
Similar Messages
-
InDesign CS3 5.0.4 Changes to documents not being registered properly
My boss has been complaining about a lot of "mistakes" lately and changes not being made, which is odd because I don't generally make a lot of mistakes. So I started paying very close attention and this is what I have discovered:
Sometimes changes that I make to a document will randomly revert. Sometimes changes don't get saved. The problem is random and not reproducible.
For example: I made a change to an item, and then copied and pasted that item onto another page. The change "sticks" in the new location of the item, but the original somehow, at some random future point, reverts to the pre-change state.
Another example: I moved an item on a page, then saved, then printed, then closed the document. In that order. The printout shows the change. When I opened the document again, the item I moved was back where it was before I moved it.
I am not having this problem in any other application. Just InDesign. Can anyone help me? I don't know what to do, but if it keeps happening, it could get me fired.
My computer is a Mac Pro 2.8GHz Quadcore. OS is 10.5.6.
I have, of course, already tried repairing permissions. Thanks for your help.Hello Michael,
I just posted the exact problem to a new forum today ...changes revert... Have you had any problems since the preferences were trashed...? Do you think the Save As technique will work alone without the trashing of the preferences?
Well, you do have some company in your misery...
as if that is any consolation for being fired. . .
We hope it hasn't grown to that extent.
We do a quarterly magazine (Veritas) ... and this problem has plagues us since we've moved to CS3 years ago and just thought it was operator error. Until we started noticing much of the same proofreading errors version after version.
Let me know how you're progressing, and we'll report back about how we move along as well.
Until that time ... Earl J.
USASOC History Office
Fort Bragg, North Carolina -
Facts:
1.Cheap sync cable from Fry's [*****]
2.stuck in recovery just died from being unable to cut it off.
3.When powered up it goes to apple logo then iTunes recovery connect logo.
4.Will not connect to computer due to low charge.
5.Cuts off in seconds.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
Registered Server Program not being registered?
Hi,
first of all, I'm an ABAPer, not a Basis guy, so i apologize if i'm not giving all the info required to solve this issue.
We have a program that's scheduled to run every morning at 4am. This program calls an RFC to XI and sends data to an external SQL database.
it seems that EVERY Sunday, after full backups, the initial run of this program fails. If it fails, the job is run up to 3 more times. Almost 100% of the time, one of the successive runs works.
And when I say a successive run works, I mean a duplicate job that's been kicked off, literally less than 1 minute later, will run fine.
Also, the job will sporadically fail during the week on its first run, yet successive runs will work.
it seems to me that there is a problem registering the program that my ABAP program calls.
any ideas on what I ask my basis/XI team to check for?
points will be awarded.
thanks,
rp.here's what we could find
M Thu Sep 6 04:04:38 2007
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host hrxxx.valero.com / sapgw45
M * ERROR program RFC2XMBSERVICE_HR2XIP not registered <-------- error here!
M *
M * TIME Thu Sep 6 04:04:38 2007
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1694
M * DETAIL TP RFC2XMBSERVICE_HR2XIP not registered
M * COUNTER 239
M *
M *****************************************************************************
M
A RFC 1485 CONVID 80501535
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: ZHRO_FLEX_ONLINE (Transaction: )
A RFC> User: SAPHR (Client: 120)
A RFC> Destination: RFC2XMBSERVICE_HR2XIP (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT'
Transaction program not registered
[abrfcio.c 8065]
We don't understand why this program fails to register itself a few times per week. -
My new computer has Windows 8 and so far I did not see any solution for that.Please help me get my purchases on my iPod!
The problem you are facing is basically a conflict of apple id authorisations. Some of the apps on your ipod were downloaded using one apple id that you created sometime earlier and recently you probably created another apple id to download some apps. This conflict between the two apple id;s is what is preventing your computer from syncing with your ipod and you will consistently get the message saying that your computer is not authorised. To correct this problem you need to authorise your computer with both or all the apple id's that you created ie the current one and the past one's that you created sometime in the past.
So click on the 'Store' button on the main menu bar on itunes and then click 'Authorise this computer' you will get a pop up window asking you to enter your apple id and password complete the process for both or all your apple id's separately each time. Once your computer is authorised for all the apple id's you created you will have no problem syncing your I POD. This is the only way to solve this issue as the conflict is with the authorisation in thr system software which checks every app or download with the actual apple id you used when downloading the app.
This will resolve the conflict and it will work. -
IPod Classic installed on second computer - not being recognized
I bought a second iPod classic for my fiance for Christmas. I planned on him using my current laptop to synch, purchase since I just bought a new desk PC for myself. I cleared all of the itunes and related categories (Bonjour, Apple auto update, etc) and downloaded iTunes from site. He made a couple purchases and when we go into iTunes, it still slows my name under the Library and where files are located. It will NOT synch his purchases. I have uninstalled the iTunes again as before with the instructions from apple and uninstalled files in the order they recommend, downloaded iTunes again. It still will not recognize the iPod and sync purchases. They show in the library, but we cannot move them to the iPod.
Not sure what else to do. Do you think it is an iPod issue and I need to return it?When you plug in the iPod does it even appear in Device Manager? See this article for more details.
http://support.apple.com/kb/TS1496
Otherwise, I have a feeling that the USB ports on the Netbook don't output enough power to allow the iPod to fully communiate properly with the Windows Vista O/S.
B-rock -
Itunes download results in computer not being able get on network
When I download and run Itunes on my Windows 7 64 the program runs but somehow it disconnects my computer from my home network. I have to do a system restore in order to fix my computer. Can someone help me overcome this?
Maybe you're seeing some Layered Service Provider issue, like the one in this Apple article -> Apple software on Windows: May see performance issues and blank iTunes Store
Do you see anything under Winsock in the Autoruns application? -
Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
My ipod nano is not being recognized in iTunes or in Windows, it only shows up as a USB and when i plug it in it says 'do not disconnect'
This happened after I put the ipod nano in Philips Ipod speakers.
I've reset the ipod mulitple times, uninstalled and reinstalled itunes, restarted my computer, and I can't restore the ipod because it doesnt register on my computer and it doesn't show up in itunes, but for some reason it still says dont disconnect.
What should I do??just hold down the “-” button and the power button. when it says “ok to disconnect” hold down the powerbutton and the “-” button again.
copied from iPod nano 6G diagnostic mode -
my new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.
At first my computer had issues. Once it go to sleep it will not back again. I dropped my laptop at apple store to fix it. After 10 days they returned my laptop saying they were no able to fix the problem so they replaced motherboard aiming if that might help. Acttually that didn't help.I had same issue again. I visited apple store again. This time they said they could fix, if I will allow them to format the harddrive. I said ok. They formatted it. It was working fine for few daysAfter few days compter is taking.even more than 15 min to shutdown. Now computer has another problem. It is being hang frequently like every 20'to.30 min.
I don't know what to do? I still have one month left on first year warranty. I have requested couple times to apple associates either to fix or replace or refund. They are showing me rude behavior. They are not understanding my situation. I am a student. I need to do lot of home work. Since last three month my mac book and apple associates giving me hard time. Any suggestions are welcome.Contact Apple Customer Care - not Apple Care - Customer Support. Have your receipts handy and/or case numbers. Be patient, be calm, and tell your story just as you have here. I get the sense you are not in the US and don't have access to an Apple Store but are going to an independent shop. This makes using Customer Support all the more important. If phoning isn't viable, use registered mail.
Since time is running short, be prepared to purchase AppleCare to exennd your warranty 2 more years. Yes, you shouldn't have to do this, but it gives you added protection and more opportunities over the next 2 years to claim a replacement computer if you don't get one immediately. After dealing with a similar unhappy situation with a Mac in the late 1990s I finally got a replacement computer and reimbursed for the AppleCare policy. -
Server 2012 not auto-registering with 2003 DNS
Hope somebody can help with this, it's driving me mad.
I have about 600 VMs, all Windows Server of various versions from 2000 (I know...) to 2012. My Active Directory and DNS runs on Server 2003. Two of the six DCs (the DNS servers) are physical.
The problem I have is that a handful of 2012 VMs seem to stop registering in DNS. Most 2012 VMs are fine, and all the non-2012 VMs are fine. So based on that I think it's more to do with something being wrong with these few VMs rather than the
DNS servers. It's always the same servers that have the problem. It causes grief because once the DNS scavenge happens the servers get removed and then nobody can contact them by name.
The "quick fix" is to run ipconfig /registerdns on the problem servers, whereupon they put themselves back into DNS again but don't update the registration. So eventually they just get scavenged out again.
I'm wondering if it's something to do with how the VMs were created. Some but not all 2012 VMs were created from a VMware template and customised via vCenter. I've checked some of the servers for duplicate objectSid and objectGUID in Active Directory but
so far they're all different. There's nothing particularly obvious in the event logs on these servers, aside from saying they're failing to register IPv6 PTR records (which is correct, should probably turn IPv6 off...) but I don't think that'd cause IP4v A
record registration to fail?
Any suggestions? Thanks very much in advance.Hello, thanks for the reply.
Yes the "Register this connection's addresses in DNS" box is indeed ticked. I tried un-ticking and re-ticking it to see if that kicked it back into life on one server but it made no difference.
Some of the servers that had the problem now seem fine, and are updating the DNS registrations daily and have been for over a month. Others seem to update for a period of time, maybe a couple of days, maybe a few weeks, and then stop. Others only update
when I do the ipconfig /registerdns.
Power Management is enabled, though these are Server operating systems, so I'd like to hope they wouldn't do anything as daft as shutting down the NIC (especially when they're trying to talk over it). However this must be a default setting as it's enabled
on all the VMs I've checked, and the vast majority are working fine. I'm going to try disabling it on one of the problem servers but I'm not terribly hopeful it'll kick it back into normal operation - unless you can point me towards a KB article or something?
I'd enabled the DNS Client Operational event log on some of the problem servers but to the untrained eye it doesn't contain anything terribly useful (I've yet to find out what the various return code and option values mean). -
New 3rd Gen. 4 GB iPod Shuffle not being recognized by computer or iTunes
Hey everyone, I've read some of the other posts here on this thread about other people having problem getting their computer to recognize the new 4 GB iPod Shuffle when plugged into the USB drive, and it seems like I am having a very similar issue. I just received my iPod in the mail a few days ago and tried plugging it into the USB and got NO response whatsoever from my computer or iTunes. I am operating with Windows XP (Service Pack 3) on a Dell Inspiron Intel processor, 2 GHz with 3 GB RAM, with iTunes 8.1 (just updated). When I put something in my USB usually I hear a noise (sounds like DO-do ha) which tells me that my laptop recognizes whatever is plugged in, and usually I get a little box in the bottom right hand part of the screen that says it's been plugged in. I didn't get any of this when I plugged it in.
When I first opened the box I turned the shuffle on and the light went green for 1 second, orange for 1 second, red for one second, then dead..I suppose this is expected since I figured it's new and needs to be charged, so I turned the shuffle off, plugged the USB into the earphone socket then into my USB, and then turned the shuffle on, and got nothing but the same sequence of lights. It's one thing if iTunes just didn't recognize the shuffle, but I checked the Device Manager and My Computer and the USB drive wasn't even listing the shuffle as being plugged in..maybe the USB cable that came with it is faulty?? I read all of the technical troubleshooting notes on here and tried the 5 R's and nothing is working at all..
I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!GTEagle05 wrote:
I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!
According to http://support.apple.com/kb/HT1495
iTunes for Windows does not support having multiple iPods *connected simultaneously.* -
So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!
- I would try placing the iPod in recovery mode and then see if iTunes will see the iPod. try both with the iPod not connected to the computer and with it connect. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next see if placing the the iPod in DFU mode will make it visible
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?
If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.
Maybe you are looking for
-
I just bought this in order to copy and paste from a PDF and after I convert I still can't..
I just bought this in order to copy and paste from a PDF and after I convert I still can't..
-
Hi I want map the IDOC to Webservice request and respons to the File .. can i achive that without using BPM ..
-
Sort Function is being Overridden by Some default
I've created a simple HFR report using Financial Reporting Studio to do budget vs. actual on a particular dimension (cost center). The dimemsion member selected is part of an alternate heirarchy which aggregrates the same way that I'd like the report
-
How to disable Copy/Paste to a field in Siebel 7.8
Hi Gurus, Is there a way to disable paste into a certain field in Siebel 7.8?There is a way to do that in normal HTML but is it possible in Siebel.
-
Macbook Pro startup is very slow
Hello everyone, My macbook pro (august 2010) with Mountain Lion is starting up very slow (about 2 minutes or more) since a couple of weeks. When started up, the applications take also about a minute or 3 to start up. So the time it takes to get my Ma