Computer not communicating with devices

I have a 27 inch late 09 imac. Just recently i set up the firewall and encrypt the files for the first time. Then I realized my printer was not connecting wirelessly to my mac. It worked when i plugged it directly to the mac. So I think i accidently changed the settings and now i cant nothing connets thru wireless connecttion. My internet works but my printer or my apple remote app no longer wants to connect. When i tap on the romote app it says remote cant connect to Itunes library check your networks settings and try again. I use to be able to listen to music from my computer thru my phone. Please Help!!! I thnk i changed a seeting that is making it not connect. I tried turning off the firewall after i had realized but it still did not work.

Hello Logan,
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1004
Maybe better yet...
http://www.iosjailbreak.ws/fix-itunes-error-3014-during-ios-firmware-restore-132 7.html

Similar Messages

Imessage on my computer not communicating with my phone.

Imessage on my computer not communicating with my phone. In my computer settings my phone number is no longer an option, just my email. How do I get it back?

HI,
I had this.
On checking the iPhone the iPhone Number was not ticked and the whole option to change it was greyed out.
I removed the Apple ID and waited to see if th Number got ticked (Settings > Messages > Send and Receive).
It did not.
I put the iPhone in Airplane Mode
After a few minutes I "restarted" the iPhone by turning off Airplane Mode
This time the Number was ticked.
I Added the Apple ID and then restarted Messages on the Mac.
I soon got the pop message about the iPhone using it's Number and the Apple ID and Accepted.
8:45 PM Wednesday; March 13, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Computer not communicating with printer(s) scanner

I recently hooked up an Officejet J6480 wireless printer. I also have a J5780 hooked up via USB. After hours, and I mean hours, of being on-line with Tech Support through Chat and uninstalling and reinstalling, several times, and trying numerous things, neither printer has communication with the computer for scanning. The J6480 will scan if you go through Paint so it is functioning. The J5780 I haven't tested. I have downloaded drivers and every other thing that was suggested and the computer is not communicating with the printer for scanning. I have a Dell computer Inspiron 530S and am running Windows Vista (32) May I also say, that I disable the Firewall & Virus programs when downloading, etc. so it doesn't interfer. I have tried everything but dynamite to get the scanner to respond. I've downloaded the Patch suggested in the drivers listings and everything. Im beside myself because the J5780 scanned fine until I installed the J6480. Now the window on the printer says there are no scan settings available in the window on the printer. Chat Techs, I think, are beside themselves too. I uninstalled the J5780, installed the J6480 and then went into 'Add a Printer'. Everything went fine except the scanner. I get a message from Solution Center saying there is no communication between the computer and the scanner. I think something is missing here. If anyone knows a solution I would be more than grateful. HELP!!!!

Did you do an L3 uninstall of all HP software and start from scratch? The L3 uninstaller should be on the install CD's for each printer. You may have to do a search of the CD to find it.
Tell me what router, ISP and encryption type you are using? Also, what kind of security software are you using?
Have you done a WIndows Update and updated your security system? Do that between the L3 uninstall and the re-install.
There is a lot going on here. I'll hang in there with you...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Computer not communicating with printer

This morning my HP Pavallion downloaded some new updates and installed. After that I consistently get messages of "No communications with printer". It will not communicate with either my printer or pdf writer printer.
I have rebooted computer 2-3 times, restarted printer 2-3 times and still have the issue.
In an earlier note I noticed a recommendation of going back to the original computer program before the updates. I would I do that?
Any recommendations for a fix?
Glen

Hey @papamkoch and @glendodom ,
Welcome to the HP Forums!
If you're looking to do a system restore to before the issue started (which I agree is a great idea) you will want to check out this document:
System Restore - Windows 7
How to refresh, reset, or restore your PC - Windows 8
These documents cover the steps to access the restore. If a restore doesn't work you can also try a recovery which will put the unit back to it's original factory condition.
Let me know if the restore works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Computer not communicating with keyboard

Both my computer and I are old, but I was hoping my computer would outlast me. Its a iMac PowerPC G3, 450 MHz, Memory 576MB, System 10.2.8 (I updated it a long time ago).
I can't get any keyboard to work with it. I've been using the Microsoft Ergonomic keyboard with a wireless mouse and that was working fine for a long time. I do remember dumping OS 9. I've taken it to a Mac repair shop and they couldn't figure it out. The mouse will click so I can open something, but I can't type any words. I also can't zap the PRAM because holding down those keys doesn't communicate anything to the computer. We tried it with a new Ergonomic Keyboard with no results. At the repair shop, they tried it with several of their keyboards with no response. I also can't add anything new to the computer, like a printer installation disc or a program, because it requires the administrator password, and that won't record. Has anyone heard of this before or have any ideas, or should I take it in for a CT scan next time I go? I would greatly appreciate any help.
iMac Mac OS X (10.2.x)

hmm Im not really a a tech export or no anything about the HP all in one models but with most computers you can buy a replacement keyboard that if the computer has the right ports such as a usb port you can plug in a new keyboard.

My iphone 3gs is not communicating with itunes and in windows there is an exclamation mark

my iphone 3gs is not communicating with itunes and in windows there is an exclamation mark next to the usb device. tried removing itunes and reloading, all softwares up to date. just got a new iphone 4s which is on charge but not switched on and used.

For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver.

My addressbook is not communicating with iTunes!!HELP!!

I can't sync my IOS devices with my last version of the address book! I updated my address book in my Macbook Pro OS X 10.6.8 and then it is not communicating with iTunes. I tried the 28 step troubleshooting to this issue, my iTunes cache is clean but still not syncronizing... Tried to use iCloud online to upload the vcf cards but in each group it losts a lot of contacts (and I don't know why, because they are far away from the iCloud limits...).

For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver.

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers. When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't. The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network. What am I doing wrong?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

My MacBook is not communicating with my desk top to enable printing from my MacBook. I need to find out how to make that happen. I have a static IP address on my desktop but don't know what to do on the Mac Book.

My MacBook is not connecting to the host computer for the printer. The host computer has a static IP address which is different from the IP address that the laptop is looking for. How do I change the laptop so that it looks for the host computer's correct IP? The laptop is connected to the router. I know this because I can get on the internet with the laptop.

The host computer is Dell and the operating system is Windows 7. The printer is an Epson, and it is wired to the host computer with a USB cable. It does have host printing turned on.
The three have been working harmoniously for a long time. The router had to be reset; and after that, the MacBook documents would no longer print.
We created a new static IP address on the Dell but the MacBook is not recognizing it. We have researched the internet trying to figure out how to make the MacBook locate and recognize the correct IP address from the Dell so they can communicate with each other. The laptop is not communicating with the host computer because is is looking for the wrong IP. The host IP is 192.168.1.245 and the laptop is looking for 192.168.15.237.
I hope everything is clear. The person who originally set it up is no longer available to help me. Thank you for any help you may give me.

Help DSCC agent not communicating with AppServer or Tomcat?!

Installing Directory Server Enterprise Edition 6.3 From Zip Distribution on system running Solaris10 11/08.
Cannot get DSCC to work with either AppServer or Tomcat.
Both AppServer & Tomcat deploy DSEE WAR file and I can look at things that I have manually registered via command line. Cacao agent is running it is just not communicating with AppServer or Tomcat so it cannot commit any actions such as starting and stopping directory instances or creating new directories instances within the web app.
Is this a bug that occurs only when doing a new install using the Zip Distribution?
The Error message I get regardless if Appserver or Tomcat is:
"Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11169."
I changed to port 11169 because it had a conflict on default port 11162.
Output from cacaoadm & dsccsetup commands is follows:
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
default instance is DISABLED at system startup.
Smf monitoring process:
8423
8424
Uptime: 0 day(s), 0:47
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11169
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8
java-home=/local/jre
jdmk-home=/local/dsee6/private
nss-lib-home=/local/dsee6/private/lib
nss-tools-home=/local/dsee6/bin
retries=4
enable-instrumentation=false
network-bind-address=0.0.0.0
root@dsee:/ $ /local/dscc6/bin/dsccsetup status -v
## /local/webconsole/usr/sbin/smreg/smreg is MISSING
## /local/webconsole/usr/sbin/smcwebserver/smcwebserver is MISSING
## /local/dscc6/dccapp is present
Sun Java (TM) Web Console is not installed
## /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm is present
## /local/dsee6/cacao_2/.configured is present
## /local/dscc6/lib/jar/nquickmodule.jar is present
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param network-bind-address
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param jmxmp-connector-port
Cacao uses a custom port number (11169)
## /local/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /local/var/dscc6/dcc/ads
Port of DSCC registry is 3998
Any work around or ideas on how to get DSCC working?
Thanks!

I started over and installed Glassfish and everything just worked. After the fact I think the real problem was related to the server.policy file. I think this was the problem because using the default appserver 8.2 that comes with Solaris has a different path and I got this same error when tried using tomcat also. When installing glassfish it uses this default path as in the server.policy example as follows so it just worked.
Add the following lines in the {install-dir}/domains/domain1/config/server.policy file
// Permissions for Directory Service Control Center
grant codeBase "file:${com.sun.aas.instanceRoot}/applications/j2ee-modules/DSCC/-"
permission java.security.AllPermission;
Hope this helps some as I was really stuck and confused at the time and just started playing with the stuff. Growing pains. Thanks to those that replied.
Thanks!
Wences

SAP BI Client tools are not communicating with BO server

Hi Experts,
We've recently installed BI 4.1 . We're having few issues:
1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place?
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
8. Do we need to install all these on client machine?
9. Could you please give me software list which should be installed on client machine?
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
Thanks in advance.

1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
Could you confirm that you are able to ping the BO server from Client machine. Also use telnet command from commandline of CMD in client machine. It will help to confirm that port communication is successful. Use ipaddress:cmsport for the system while logging into the client software. Update the hosts file entries at client machine with BO server name and ip address. Create an exception for BO installation location at client machine and check the results
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
Check on the server side first where your web server is installed (I am assuming tomcat in your scenario). Use http://serverame:8080/BOE/BI and http://servername:8080/BOE/CMC (8080 is default port. If it has been changed use the correct port).
If its working well. Perform the same activity using ipaddress:8080 at server. Next chek whether using the same URL you are able to get BILaunchPad and CMC pages and able to login from the same.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place (https://service.sap.com)?
Software and downloads-->Installations and Upgrades
- D" SBOP DASHBOARDS (XCELSIUS)
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
Look into the admin guide for installation pre-requisites. These are available at Analytics Knowledge Center
We have a drop down for all products. Look for the guide and proceed with the installation.
8. Do we need to install all these on client machine?
Dashboard,Lumira,analysis office, CRE and CR2013 are client tools and hence need to be installed on client machine.
We also have CRS 2013 which is a server software and has to be downloaded from service market place. The li
9. Could you please give me software list which should be installed on client machine?
These vary according to user requirements. Check with developers for their softwares needed
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
In BI4.1 LCM comes by default. It is a server application. You can find it in CMC named as Promotion management and version management.
Use the admin guide and installation guide for all of the above. It will help you.

VM Machines not communicating with each other on Hyper-V 2012

In Hyper-V 2012 on Server 2012 I have created two VM's Server 2008 64-bit & Server 2012 64-bit.
The problem is both VM's are not communicating with each other.
Regards
Ganesh Parte

Hello,
seems this belongs to the Hyper-V networking configuration settings. Please ask this in http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
and also describe how you have the network settings configured in the Hyper-V MMC.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

By rotating the phone, the image and program remain static and do not turn with device

My name is Alexandra, I’m from Russia.
I have got IPhone 5. And screen rotation doesn’t work on it. (By rotating the phone, the image and program remain static and do not turn with device)
The IPphone's data is:
IMEI 01 340900 881941 7
ICCID 8970 1991 2092 3807 872
Vendors in my country explained to me that this case relates to the World APPLE warranty and I can exchange my IPphone for a new one in any licensed center in Europe. I want to reserve time for a visit to the AppStore in Barcelona for solution this problem. Is it possible? What do I need to carry?
I’m also more interested in possibility of replacing my phone on the same one in different color. Is it possible?
Thanks in advance,

Not all screens rotate. For example, the home screen does not rotate.
Also, having the portrait lock turned on will prevent all screens from rotating.
This is covered in the User's Guide.
There is no International warranty on the iPhone, never has been.
Warranty and support are limited to the country of origin.

Scanning Device not Communicating with the Computer

Can anyone help? I go to launch my Hp Director software to scan a document and an error message appears that says "An error occurred communicating with the scanning device. Please ensure that the scanning device is connected properly and try again." This has happened before but I can't remember the steps performed on the Menu of the scanner. Does anyone know how to get the computer and Laserjet 2840 to communicate?
Thanks

AlmostThere wrote:
If the error message appears on the computer while scanning from a networked product, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542. If with USB, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00040499&cc=au&lc=en&dlc=en&product=3204785
Regards,
AlmostThere
your link @ http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542 doesn't work

Computer not communicating with devices

Similar Messages

Maybe you are looking for