Computer not connecting to network after a good nites sleep

My computer will frequently (once every other day) not automatticallly reconnect to my network after waking from sleep in the morning. I have all the security options enabled, tried changing the interference robustness on and off and it seems to make no diff, reduced the network range to reduce interference from the 3 other wlan networks around, and changed the channels around. It didnt do it in my house. I realized that when I put the cpu to sleep at night, I leave iTunes running. Well, in a dorm, there is alot of shared music going. I tried quitting iTunes, putting the computer to sleep, and waking it up and it reconnects every time. when i leave itunes on and repeat the test, I have to connect manually by using the drop down menu (which i hate) and sometimes it will say "error joining network" a few times before connecting. I havent thouroughly tested this, but is it possible that the sharing feature of itunes is somehow interfering w/ the airport connection? Maybe it is looking for shared networks before the network connects and prevents it connecting somehow? If this is the case, I dont mind quitting itunes every night as long as I dont have to screw with the internet connection every morning.

I know you don't have any replies posted here, but has anyone given you or have you found the answer?
We have the same problem with our airport extreme. My son listens to iTunes at night too. Sometimes the next morning with or without the iTunes running at night - suddenly my network is gone. I have to go back in and re set some stuff. Our AE is not even 2 mos old and it really has been problematic.
When we first got the AE set up this strange network appeared. We didn't recognize it from anywhere and it wasn't the AE's address. Every once in awhile it shows up. There are times when we think it might be our neighbor's wireless connection, but who knows?
Then the other night my son was on AIM and MIM chatting when suddenly the connection was dropped. He tried to sign back on but everything was gone. A strange new network name appeared (this time it looks like the AE created a new network and name based on it's address) and we could not sign back on to the internet. This all happened in the space of 2-3 minutes. All my efforts and re-sets have failed. My husband uses the AE as a router and plugs his PC into the LAN port to connect to the internet (of course the wireless portion then no longer functions thereafter). Well, now he can not even sign onto the internet.
I have put at least 6+ hours into trying to figure this out. i guess I'll have to give up and try Apple support since it is still basically new. Last time I called Apple Support, it sure seemed like I was able to guide/help myself more than the joker csr I happened to dial into.
Anyone else have this problem? Did you eventually fiz it?
Cheryl

Similar Messages

  • Express will not connect to network after Extreme firmware upgrade to 7.2.1

    I got the auto update notice for a fimware upgrade to my Extreme to 7.2.1. Once I upgraded I am no longer able to connect my Express. I have done all the resets and have gone through all configuration each time, but after it resets itself after configuring it, it no longer shows up in the AirPort Utility until I reset it again. The only thing unique about my Extreme config is that I have the Radio Mode set to 802.11b/g compatible. This was necessary to connect TiVo wireless USB adapters to the network.

    I can tell you that you are not alone - I have tried to crack this one for some days - Im just following the instructions from the Airport assistant and it dosn't work

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

    My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable.   I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99%  installed on the progress bar and sits there until it times out.  I suspect one of the follow but am open to other ideas from those more knowledgeable:
    1.  Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
    2.  Could my WPA WPA2 PSK AES encrytion be messing it up?  Are the modern firmware and updates designed to accept these ?  I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase.  What to do if so?
    3.  Could Church Lady be correct and that it is Satan preventing the installation?  If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

    Hi @Marvalina1968,
    Welcome to the HP Forums!
    I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
    First to answer your questions:
    It is possible the printer could be locked to an old configuration and needs to be reset.
    I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
    Your Norton antivirus, could possible be causing the installation to fail.
    Please take a look through the following guides:
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Printer Does Not Maintain Wireless Connection.
    If the guides do not resolve the issue, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. Disable antivirus software.
    Disable any firewall programs. Turn Windows Firewall on or off.
    Re-install the software. HP LaserJet Full Feature Software and Driver.
    Hope this solves your problem, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Error: EPrint not Enabled, Also: Printer not connected to Network

    I have been using this printer and EFax until recently when EFax wont work.   I am connected to Network, I can use printer for printing from laptop, IPAD and Iphone.   Have good connection. When I attempt to send EFAX, I get "Your printer is not connected to Network"   Then I am told to enable EPrint,  IT IS enabled.    Printer is great, EFax wont work.  

    This reply may be late for this user, but it might be helpful for any current users.
    I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
    1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
    2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
    3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
    4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
    This worked for me after I read several other postings.
    Good luck!

  • P2035n not connecting to network, it show on it, but try to connected and it fail

    p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then  cant connect to it no, even after reinstalled. it looks like the printer is shut out.

    I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!

  • Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

    Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

    Found the fix.  Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
    +++++++++++++++++
    edgravel
    Re: iTunes Store Won't Load, Won't Show Error Message
       Aug 13, 2011 4:32 PM    (in response to Daedalme) 
    I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
    Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
    then type in:
    Netsh winsock reset
    Hit enter, restart PC, open iTunes, go to Store
    Hope it works for you too. 

  • I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network.  I reset both my wifi and my ipad and I still get the same error.

    I've had my IPad 3 for awhile and had no problems with it.  The other day I went to connect to my wi-fi and it told me could not connect to network.  It recognizes my wi-fi but won't connect.  I have shut off my wi-fi and still the same problem.  Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network.  What is wrong

    Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

  • Secure link to itunes store failed computer not connected to internet tried ununininstalling everything to do with itunes no joy also error code coming up E0000225 anybody out there got any ideas

    Secure link to itunes store failed, (computer not connected to internet tried uninstalling everything to do with itunes,no joy also errror code E0000225 appearing. Have turned off windows firewall and also my Bullguarg security settings.Can anybody out there please help me thanks.

    Hi,
    You could be right that the response to clicking on help is a symptom of an entirely separate issue, but nevertheless the secure link to itunes is definitely failed, and I am unable to log into Itunes on either PC.
    I also noticed that even if I click on the link to create a whole new Apple ID, I cannot do that either, presumably because the secure link is not working.
    After I noticed that there were weird things happening this morning, I did change my Apple ID password in the hope that this might resolve it, but it seemed to make it worse.  Now, all of my apple devices keep constantly prompting me for the apple ID password, and randomly either accepting it, or telling me it is wrong.  I know the password is correct because I can log onto the apple Manage My Apple ID screens in a web browser with it.
    I was starting to think that this is an ISP issue (BT Broadband), but I have not seen anyone else posting with the same issue.  Does Apple use a different security protocol to everyone else?  I'm asking because all other secure services seem to be working fine, but anything related to apple that requires a secure connection or authentication is having issues.
    I have also seen reference to making sure that Itunes is listed as an allowed program in Windows Firewall.  I cannot seem to do this because it says that my Windows firewall is being managed by McCafee.  I have checked the settings in McCafee, and it appears to me that Itunes, Bonjour, and many other apple programs have been granted "Full" access.  As said before in any case I have tried temporarily disabling the firewall and even this did not solve the problem.

  • My iPod will not connect to itunes after windows 8.1 download

    My iPOD will not connect to itunes after windows 8.1 download
    I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
    My ipod does work on my old computer and it was working on windows 8 before I update to  8.1
    I don't want to installed again because I just did that and didn't work!
    I want to use my iPod on this computer and system.  Can this be fix?

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

    I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Galaxy Nexus Not connecting to network

    Good Evening,
    I just received a replacement phone for Galaxy Nexus. The phone is not connecting to network. I am able to connect to wifi but unable to make calls or send texts since having the phone activated last night.  When I was in the store last night I was able to receive and send a few text messages but since then haven't been able to communicate using my phone. I don't know if this an issue with the service in the area North Attleboro, MA or with my phone. Been on hold for 20 minutes with customer service.
    Thank you,
    James
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

        Thanks for the additional information jdeguilio!
    No issues noted for North Attleboro. Please reprogram and test. To reprogram please pull the SIM card for one minute, then reinsert and power off/on. I see that you are using the same SIM from previous phone and this should not be a problem; however, if you accidentally touched the golden portion of the SIM card that could cause some issues. If reprogramming does not improve, try a new SIM card. You can get one for free at any Verizon Wireless http://bit.ly/3SdsA corporate store.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • My ipad2 will not connect to network since last iOs update.

    My iPad 2 will not connect to network since last iOs5 update.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Macbook not connecting to network

    My Macbook's internet won't work all of a sudden. I was home for the weekend and it was working fine on my home network.  This morning, I woke it from sleep and although airport says it's connected  to my dorm's network, the net won't connect (no Safari, Firefox, no Mail, etc). I've tried everything I know; restart, delete the network and re-add it, try another account... Still nothing.
    The network is working fine, I can access it on my iPad and iPod.
    Any thoughts?

    Imaan Hisham wrote:
    and also taken from "About NVRAM and PRAM":
    "OS X does not store network settings in NVRAM / PRAM. If you are troubleshooting a network issue, resetting it will not help."
    This is if you are troubleshooting a network issue.  If your computer simply would not connect to networks, it may not be a setting that is screwed up, it may just need a reset to cause it to start using the wireless again, it doesn't hurt to try and at least some information was given to you to help.  Nobody said it would fix anything, they simply stated TRY...

  • HTF do i get my iPhone to connect to network after iOS7 upgrade? (Upgrade--really?)

    HTF do i get my iPhone to connect to network after iOS7 upgrade?  Upgrade?  Really?   I'm just really upset that I have to continually make concessions to someone else and my product does NOT work the way it should, and has done in the past!!!!

    Depends on your browser and it may appear in your downloads folder to run.  If you are using IE, it will appear on the bottom of the screen, Google Chrome, bottom of the screen, Firefox, top of the screen with an big arrow

Maybe you are looking for

  • Using external HD connected to TC as media server

    Just got my first Mac and I am trying to to get everything hooked up. I have the TC connected to AT&T U-verse via ethernet and I am using the TC as the router for my home network. My iMac is connected to the TC via ethernet. XP laptop, printer, iPad,

  • HT1212 itunes error 0XE8000068 tried re install itunes still the same. laptop is brand new w windows 8

    I bought a brand new laptop with windows 8 for OS. Downloaded & installed itunes but gives me error 0XE8000068 when I attached my iphone 5. windows is up to date. as well as iphone 5. Tried changing cables & restarting laptop, still the same. Uninsta

  • Restrict SOA JMS Adapter dequeue frequency

    Hi, we are reading messages from third party JMS queues in the BPEL Process using JMS Adapter in the Composite. Sometimes because of more load on the JMS queue ie around 40 records per second we are facing load issues. BPEL is able to read close to 4

  • Portal content migration from 7.0 to 7.3

    Greetings, We have installed a clean version of 7.3 portal environment (vanilla). I have transferred all 7.0 portal content (most of it - WAD reports & ECC transaction iViews) to 7.3 environment by using standard transport mechanism. After I execute

  • Create bleed

    How can I open a pdf file in photoshop and add a 1/4" bleed without changing the size of the pictures and text in the file? The colors are solid around the edge part that I need to pull out for the bleed.  ??????