Computer not recognizing camera is plugged in (fire wire)

Help! I need to down load some video from a MiniDV to my computer ASAP -- I'm new at this, got the right fire wire cable but when it's plugged in and turned on, the computer is not registering that there's a camera -- it's a Panasonic miniDV.

Hi
my list
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape.
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
Yours Bengt W

Similar Messages

How can I download Camera Raw? I bought CS2 a long time ago and it was upgraded to CS5 but I do not have Camera Raw plug in. Thank you

How can I download Camera Raw? I bought CS2 a long time ago and it was upgraded to CS5 but I do not have Camera Raw plug in. Thank you

Which camera make and model are your Raw files from?
Camera Raw ships with Photoshop and is constantly upgraded by Adobe to keep up with new cameras as they are released to market.
It's likely that your camera requires a version of Camera Raw which is not compatible with your CS5. Or you may simply need to upgrade Camera Raw via Help > Updates in Photoshop.

Skype not recognizing camera after 10.8.5 update

Skype not recognizing camera after 10.8.5 update. Facetime is working. Unfortunately making video calls on Skype is disabled. Any Help. If there are updates or fixes please let me know.
Is there a way to get back Skype on 10.8.5 ?
Rgds
David

iSight/FaceTime Skype not working?
https://discussions.apple.com/thread/5306216?tstart=0
Best.

I get the rsponse that itunes was improperly installed and I cannot import or burn CD's. Also, my itouch is not recognized when I plug in my computer or others. What do I need to do?

I have tried to reinstall several times and get the same message.
But, the part about plugging in my itouch and it not recognizing is very troubling. It also seems to have reset itself. I cannot get it to come on. It just shows the picture of plugging it in to itunes.

Check your security software settings as well: iTunes for Windows: Troubleshooting security software issues
Also try to remove and reinstall all Apple related software:
Removing iTunes, QuickTime, and other software components for Windows Vista and 7

TS1363 my computer says usb device not recognized when I plug my new i-pod in, why?

My computer is not recognizing my new i-pod, any cures?

In iTunes, select "enable disk use" to allow your computer to recognize/detect your ipod. Cheers!

"USB device not recognized" when ipod plugged in???

(ipod mini 4gb)
When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
I've tried eveything on the help website but nothing works! Can anyone help?!
patriot 3050 Windows XP

ok my question is do you have a mac or windows based laptop
here is why and what happened to my ipod mini
my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
so what i did to fix it was this
i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

Computer not recognizing that my ipod is pluged in!!

I have recently reformatted my comeputer and got some new music put on my itunes and when i tried to plug in my ipod it just doesnt do anything...like the little screen on the ipod that usually sais "do not disconnect" doesnt come up...the computer doesnt even accnowladge that anything is pluged in...i tried downloading the newest ipod softwhare and that didnt work...i tried putting in the origional disk that came with it and that didnt do anything...also when i plug my ipod into the computer it drains the battery instead of charging it...suggestions??

I don't know if this might work for you guys but this is what got my problem solved. If you experience the following, the Ipod was working but suddenly it stops working (i.e. the ipod screen is totally blank no icons like battery low or whatever) and when you connect it to the computer the little sign that means do not disconnect does not appear (the pc does not recognized that the ipod is connected) then maybe this might solve your problem. Do not connect the Ipod to the computer for about 24 hours. Do not try to charge it or anything just leave it by itself let the battery drained then try it the next day and hopefully the icon of battery is low will appear then you can charge it by connecting to the pc.
This is what happened to me by accident i guess, i had given up and had realized that i had just spend two hundred dollars on something that didn't work but today i tried to turned it on and the battery is low icon appeared so i connected to the PC and now it works.
Good Luck.

Computer not recognizing the iphone

The Problem:
All of the sudden, whenever the iphone is plugged into the computer, the computer fails to recognize its presence. However the itunes program recognizes that the phone is plugged and allows syncing, etc...).
The OS:
This is a WINDOWS XP
The Goal: Want it to show up in the camera and scanner wizard so the photos can be transferred on to the computer.
Troubleshooting Done So Far:
- Restarted the iphone. Computer didn't recognize iphone after this.
- Restarted the computer. Computer didn't recognize iphone after this.
- There was an update recently, but it was working fine after the update so this shouldn't be the problem
-Tried plugging into different USB ports (all of which work with other devices). Still not recognized.
- Tried going to "disk management" to disable and enable the iphone option under "portable media". There was no iphone option.
- Tried going to the "control panel" and to "cameras and scanners". There was no iphone option.
Getting Desperate...
- Tried free software called "read disk" or something like that which is a free iphone explorer application. That worked - could find the photos, but they were in a .dth format so they couldn't be retrieved
If you can offer a work around at least so the goal can be achieved that would be very helpful.
Thank you in advance!

I had this exact problem it's not your computer it's the software on the phone here's what apple did had me reinstall iTunes 12x then wipe and format my hard drive. They replaced my phone 3x all this started with 3.1 3.1.2 did not fix finally the third phone took and apparently from other post they still have problems if I were you call apple log a case then go into apple store I personally think they eaither don't care or don't know how to fix it. They will have you do every step they have. After you call and log a case try this restore the phone as a new phone not from a back up that has helped some.

USB not recognized when i plug in Zen Mi

after a lengthly install -- and seemingly successful
i plugged in the Zen Micro and i get this error message
USB DEVICE NOT RECOGNIZED
one of the USB devices attached to this computer has malfunctioned and windows does not recognize
it.
so i click the message i, i see unknown device go to troubleshoot follow instructions
attempt to reinstall the drivers -- which just hangs
i tried 3 different USB ports, same problem --- tried my ipod ---- gets the same message
but my printer and camera work
i think it is USB 2.0 (but i am not positi've since i am not absolutely sure where to find that)
i am at a total loss
i dont know if the driver is installed since it just hung on the reinstall and eventually said "already there"
i dont know if it is the computer
i dont know if it is the MP3 players
any thoughts of what i should do next
in addition -- i kept the micro in the usb port -- but the charge icon is NOT flashing
thanks
evan
[email][email protected]][email protected][/url]

Ok lets see if i can help with a few of these:
USB 2 - to determine if you usb ports are usb 2 you must go to device manager, through system properties, then look under usb and if on one of the chipsets it says enhanced then you have usb 2. like "sis pci to usb enhances host controller".
Drivers - i recomend downloading the latest driver set from the creative support website.Here and getting the new drivers installed and seeing if that hel
ps.
Not recognised - it might be stupid but something like 9 out of 0 computer problems are solved by restarting the computer. may be worth a try, assuming the drivers are ok.
Charging - unless you have the troublesum .0.02 then your computer will need the drivers and to be recognised before it can charge from usb. so im afraid you wont get it untill it installes succesfully.
hope that helped.

Computer not recognizing second ipod

The first ipod i setup works fine. When i plug in the second ipod, the itunes does not recognize it. I have created a second account to my XP and installed itunes on it, but i am having the same trouble. the only difference between the 2 is the second ipod is "Product red" - 4G. The first is the 2G. I've done the 5 R's and scanned the messageboards for this, but have not found what works. Please help.

see if any of these articles help.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive
And if your computer is a laptop, see: iPod not recognized on a Windows laptop.

Computer not recognizing my built in iSight

my computer is not recognizing its camera. I have tried restarting, forcing restart, and holding keys that apple care has previously told me to hold. I checked in my system profile and it does not even show my build in isight. Does anyone have a trick that has worked for them before, or a special way to restart my computer that may fix the problem? i am leaving for europe soon and don't want to mail in my computer if i don't have to!

I have reset the PMU twice and have reset PRAM (holding down apple-option-p-r at startup),I have also repaired disk permissions on my startup disk.
I can get access to the built-in isight for photobooth and other apple applications but as soon as I try to enable it in VMWare Fusion it stops the VMWare machine (Windows Vista) from booting until I disconnect the iSight from VMWare.
The iSight then disappears from the available hardware in VMWare Fusion (so I cannot reconnect it in Fusion) and I cannot access the iSight in any Apple application.
I have Applecare... I think I'll see if I can get any help there.

Computer not recognizing Shuffle

Hi,
I went to plug in my iPod shuffle to load songs and iTunes won't pop up, and it seems that the computer is just not recognizing it.
I also tried it in my Windows computer, and I'm experiencing the same problem. I took it to the Apple store closest to me (unfortunately I didn't make a "reservation" - the guy did look at it though, and confirmed that it was not working properly).
All of the lights come on and everything so it's not like the unit is dead. I just purchased it in June.
Instead of going back to the store, is there a place where I can ship it for repair? Will Apple send me a box to put it in postage-paid?
Has anyone experienced this problem with their Shuffle?
Thanks!

Hello, Adam.
Is this what you're looking for?
iPod Service
srb

Why is my computer not recognizing my phone as a device?

My computer is not recognizing that my phone is plugged in... It will charge it, but it won't download my pictures or show that it is even connected on my devices. I have updated all my itunes stuff and restarted my computed. What do I do?

Sometimes, your Apple ID is actually "username" instead of "[email protected]" Try putting the username of your email instead of the actual address, and see if that works?

New computer not recognizing iPod

My laptop hard-drive crashed, but I had all my iTunes on an external hard drive. My iPod (30GB, noncolor, flywheel) had been synching with the ailing laptop and was not working right (showing the folder/exclamation point sign; when I hard reset it now I just get the Apple symbol and clicking sounds), so I'm assuming my iPod problems are just a reflection of an aborted synch attempt with the dying compueter.
So now I've successfully reset iTunes on my work desktop PC with Windows XP via the external hard drive. I downloaded the latest iPod version onto the new computer but it is not "recognizing" my iPod...it says to plug in my iPod when it is already plugged in. The plugged in iPod seems to alternate between "Do Not Disconnect" and "OK to Disconnect" (with a giant checkmark) messages. Regardless, the iTunes page is not "recognizing" the iPod...
Once I do figure out how to get my iPod "recognized", should I choose to RESTORE or UPDATE it? I don't have playlists or ratings to worry about, just ~3500 preciously selected songs I enjoy shuffling at random.
Thanks!

I cannot "See" the iPod. I have tried it on different computers that worked before with my iPod. On a laptop computer, there is some humming and clicking as if it is about to be recognized, but my iPod never shows up on the iTunes list (under Library, playlists, etc). When I go to "My Computer", there is nothing listed under the appropriate E drive (USB port). On a desktop computer, the iPod actually changes to the "Do Not Disconnect" sign and again there is the expected humming and clicking that suggests it is going to be "recognized", but it never comes up on the iTunes list. Under My Computer, there is a transient picture of something like a hard-drive with a big red questionmark, as if the computer is in the process of "recognizing" something at the USB port, but this fades and then there is intermittently this "removable storage" listed under drive F. As if it is only transiently being "recognized". When I manage to right click on the transient icon under My Computer, I get the list pulled down and left click on "Format..." but nothing happens. Then the iPod screen changes from "Do Not DIsconnect" (which again was an improvement from the other computer where there was no sign the iPod was even attempting to engage with the computer) to the giant checkmark and "OK to Disconnect" sign OR goes back to the "File Folder/! icon". Tried several times....
What do you think?

TS1538 Computer not recognizing iPod Touch

My computer or iTunes is not recognizing my iPod Touch but is recognizing another iPod touch.

I had similar issue - on Win7 - (not sure what your Operating System is) and solved with this approach:
deleting the "Apple Mobile Device USB Driver" under 'USB Controllers' in 'Device Manager'
Plugging device back in
And allowing internet search for drivers - this time device has been discovered and able to show in iTunes

Computer not recognizing camera is plugged in (fire wire)

Similar Messages

Maybe you are looking for