Computer not recognizing Ipod and my ipod freeze

My ipod used to work quite fine, but not from today. When I plugged in my Ipod and load up my batteri, it worked as normal. Then when i unplugged my Ipod, it still says, that it is connected to the computer? I can't turn it off or start it. My computer also now tells that it can't recognize the software and my itunes can't find my Ipod either. Any suggestions to make it work again?
Thank you
sara

First try updating iTunes to version 7.0.2.
Here's the iTunes download.
iTunes download.
Then see these.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.

Similar Messages

  • FOUND A FIX FOR COMPUTER NOT RECOGNIZING IPOD!!!

    I have read several threads over the past week relating to the issue of iPods not connecting to the computer. The specifics were:
    1. iPod not appearing on desktop
    2. iTunes did not recognize iPod
    3. Disk Utility and iPod updater did not register that iPod was connected
    4. THE IPOD DID CONNECT TO ANOTHER COMPUTER!!!! (I would recommend trying this if you can, if it does connect to another computer you can isolate that it is the computer not the iPod causing the problem)
    I really did not want to restore my iPod or reinstall system software, but after reading a suggestion about resetting PRAM, I thought I might as well give it a try, as nothing else was working. IT WORKED!!! And it was only at the cost of resetting my computer's clock, even better!!! If this solves your problem please post here to let me know.
    If you dont know how to reset your PRAM check out this link:
    http://docs.info.apple.com/article.html?artnum=2238

    Good call, resetting the PRAM and NVRAM did the trick for me! I got some message about a new firmware that I should install on my iPod, and then after that I got messages saying that my computer couldn't recognize my iPod, and that I needed to initialize the disk.
    Your suggestions saved me!

  • New version of itunes and computer not recognizing ipod nano

    I intalled Itunes - version 11 on my laptop.  The computer and Itunes does not recognize my Ipod Nano. However it works perfectly find on another computer with Itunes Version 10.  Help -- can't sync songs on my Ipod with Itunes.

    Hi Glenfromtn,
    If you are having issues with your iPod Shuffle not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards.
    - Brenden

  • New computer not recognizing iPod

    My laptop hard-drive crashed, but I had all my iTunes on an external hard drive. My iPod (30GB, noncolor, flywheel) had been synching with the ailing laptop and was not working right (showing the folder/exclamation point sign; when I hard reset it now I just get the Apple symbol and clicking sounds), so I'm assuming my iPod problems are just a reflection of an aborted synch attempt with the dying compueter.
    So now I've successfully reset iTunes on my work desktop PC with Windows XP via the external hard drive. I downloaded the latest iPod version onto the new computer but it is not "recognizing" my iPod...it says to plug in my iPod when it is already plugged in. The plugged in iPod seems to alternate between "Do Not Disconnect" and "OK to Disconnect" (with a giant checkmark) messages. Regardless, the iTunes page is not "recognizing" the iPod...
    Once I do figure out how to get my iPod "recognized", should I choose to RESTORE or UPDATE it? I don't have playlists or ratings to worry about, just ~3500 preciously selected songs I enjoy shuffling at random.
    Thanks!

    I cannot "See" the iPod. I have tried it on different computers that worked before with my iPod. On a laptop computer, there is some humming and clicking as if it is about to be recognized, but my iPod never shows up on the iTunes list (under Library, playlists, etc). When I go to "My Computer", there is nothing listed under the appropriate E drive (USB port). On a desktop computer, the iPod actually changes to the "Do Not Disconnect" sign and again there is the expected humming and clicking that suggests it is going to be "recognized", but it never comes up on the iTunes list. Under My Computer, there is a transient picture of something like a hard-drive with a big red questionmark, as if the computer is in the process of "recognizing" something at the USB port, but this fades and then there is intermittently this "removable storage" listed under drive F. As if it is only transiently being "recognized". When I manage to right click on the transient icon under My Computer, I get the list pulled down and left click on "Format..." but nothing happens. Then the iPod screen changes from "Do Not DIsconnect" (which again was an improvement from the other computer where there was no sign the iPod was even attempting to engage with the computer) to the giant checkmark and "OK to Disconnect" sign OR goes back to the "File Folder/! icon". Tried several times....
    What do you think?

  • No content on ipod computer not recognizing ipod

    no music on ipod
    computer doesn't recognize ipod

    Hello, acarduner. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Itunes & Computer not recognizing Ipod

    Since we purchased them in December, my wife and I both have both been using our iPod 2nd generation Nanos(2 GB)with our laptop. Suddenly today her iPod is is no longer being recognized by ITunes and the computer.
    Her iPod doesnt show up in "My Computer" or the Device Manager. Since it doesnt show up in ITunes at all, I can't force a sync. My iPod is still recognized, so it is not a problem with the USB cable or the USB port.
    How can I get ITunes and our computer to recognize her Ipod again-? Is there any other way besides resetting it-?
    Thanks~~
    Gateway Notebook   Windows XP  

    Try looking into these articles:
    iPod doesn’t show up in My Computer or in iTunes
    iPod not recognized and Windows Device Mnager is empty
    Also, it's possible that this is being caused by drive letter confusion. If the above articles don't seem to help, you might want to try assigning your iPod a different drive letter, following the steps here:
    Windows confuses iPod with network drive or hard drive
    Then, after you've done that, disconnect your iPod, and reconnect your wife's iPod to the computer, and see if it is recognized.
    -Kylene

  • Other computer not recognizing Ipod touch

    I gave my ipod touch 4th generation to my brother.  I reset it before I gave it to him but his computer doesn't recognize the ipod and neither does my dads computer.  My brother has a macbook and my dad has a mac desktop.  What could be causing this?  How do I fix it?

    See:
    iOS: Device not recognized in iTunes for Mac OS X
    You should have iTunes version 10.7 or later on the iPod and that requires OSX 10.6.8.
    Hower, you shuld be able to sync (but not restore) the 4G with OSX 10.5.8 if you have iTunes 10.6.3
    iTunes 10.6.3

  • TS1538 Computer not recognizing iPod Touch

    My computer or iTunes is not recognizing my iPod Touch but is recognizing another iPod touch.

    I had similar issue - on Win7 - (not sure what your Operating System is) and solved with this approach:
    deleting the "Apple Mobile Device USB Driver" under 'USB Controllers' in 'Device Manager'
    Plugging device back in
    And allowing internet search for drivers - this time device has been discovered and able to show in iTunes

  • Computer not recognizing ipod touch 1 generation

    My Mac is not recognizing my 1st gen iPod Touch. I just updated to Snow Lepard, finally... Now it will not recognize the iPod. Checked for updates and downloaded those for 30 minutes, not any better. Any ideas?

    Let me see if I can remember...
    Hold down the Home button and then hold down the power button to power it down.
    Hold down the Home button while connecting the iPod to the computer via the USB cord.
    It should start up and show the iTunes icon and a picture of a USB plug on the screen. Release the Home button. At this stage iTunes opened up and said that it detected an iPod in the process of restoring. Click Restore (or Continue, or whatever it was). I was told I needed a software update, so I accepted that. It took about six minutes to download on my cable internet access. When the new software was installed iTunes tried to restore the iPod, but it was taking forever. After several minutes (five?) I got an error. I clicked OK and, leaving the iPod connected, restarted the computer.
    When the computer restarted iTunes started automatically and detected the iPod. I clicked Restore again, and this time the restoration was successful. When it was done, it began synching the iPod (another long process, since I keep over 3,000 tracks on it).
    I'm going from memory, so you may want to search for specific instructions on restoring an iPod Touch; but I'm pretty sure that was the sequence of events.
    Good luck!

  • Computer not recognizing iPod

    Now that I have the latest 6.0 version of iTunes my computer will no longer recognize or acknowledge that my iPod is plugged in. I have a 30Gb click wheel.
    does anyone have any suggestions?

    Michael,
    See this...
    Windows Does Not Recognize iPod
    Merry Christmas
    btabz

  • External Hard Drive and Computer NOT recognizing IPod

    Can anyone please help me? I purchased an external hard drive to store all my songs instead of on my internal hard drive. I change the location of all my songs to the external hard drive and even import any new song there as well. But when I connect my IPod to my computer to update and import my new songs, my computer DOES NOT recognize the IPod. The only way my computer will recognize my IPod is if I disconnect my external drive first and then connect my IPod. But then I cannot import or update my IPod. This is driving me nuts. Any help is greatly appreciated. Thanks
    IPod 20G   Windows XP  

    Anyone find a solution for this yet??? I'm having a similar problem. I have an external drive but my tunes are on a partitioned drive on the internal. The external is off but when I go to enable disk use it keeps turning it off on me. When I have selected manually sync songs then it tells me that disk cannot be read from or written to. The computer never shows a drive for the ipod. This is really getting on my nerves!

  • Computer not recognizing ipod, and getting music off it

    first, i want to put my music from ipod onto new computer....but i dont want to pay for that yami thing...anyway to do it free???
    and my computer wont even recognize my ipod when i plug it in? i have already installed itunes, so im confused

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Windows computer not recognizing Ipod

    I have just purchased a 30gb Ipod and have tried to connect it to my computer. My wife's Ipod has no problems being recognized, and neither did mine after a few tweaks. Now it does not recognize the new ipod at all. Any suggestions on how to make this work every time would be appreciated.

    hi Bill!
    Now it does not recognize the new ipod at all. Any suggestions on how to make this work every time would be appreciated.
    what tweaks worked for you the first time? (thinking that this might help give us a heads-up on the current problem.)
    love, b

  • Computer not recognizing ipod after crash

    My computer crashed and it was wiped clean-so basically I have a new computer. I have itunes on my computer and I was able to recover most of my music. When I plug in my ipod to the computer, itunes says it's not registered to that computer. How can I get it to work with this computer again? Right now, when ever I want to sync it, I need to completely erase everything on the ipod and resync all of my music and apps-it takes forever. Can anyone help.....please?
    Thanks!

    Can't really help. The iPod thinks it is a new computer and you can only sync to one computer. If you have the backup of the iPod you may be able to restore from backup so you will not lose any data you have in apps and your settings. Restoring from backup will still result in have to sync all the music back to the iPod.

  • Computer not recognizing iPod  touch

    This is the second time I've run into this problem. I have a 2nd generation iPod touch 16GB. I've had it for about three months so it's relatively new. I'm trying to connect it to my mac and when I plug it in, my touch will turn on and show that it's syncing and on my computer my itunes will open. But, it hasn't been doing that. I just updated my itunes to the newest version and bought a few new albums and when I tried to load the songs onto my touch, my touch won't even connect to my computer. This is the second time that this has happened to me. I got a iPod touch in the spring and in july this problem started happening so I returned it because the 90 days hadn't passed yet. And now the same thing is happening again. 90 days have passed since I've had this iPod so I can't return it. I'm not sure what's wrong or how to go about fixing it.

    Let me see if I can remember...
    Hold down the Home button and then hold down the power button to power it down.
    Hold down the Home button while connecting the iPod to the computer via the USB cord.
    It should start up and show the iTunes icon and a picture of a USB plug on the screen. Release the Home button. At this stage iTunes opened up and said that it detected an iPod in the process of restoring. Click Restore (or Continue, or whatever it was). I was told I needed a software update, so I accepted that. It took about six minutes to download on my cable internet access. When the new software was installed iTunes tried to restore the iPod, but it was taking forever. After several minutes (five?) I got an error. I clicked OK and, leaving the iPod connected, restarted the computer.
    When the computer restarted iTunes started automatically and detected the iPod. I clicked Restore again, and this time the restoration was successful. When it was done, it began synching the iPod (another long process, since I keep over 3,000 tracks on it).
    I'm going from memory, so you may want to search for specific instructions on restoring an iPod Touch; but I'm pretty sure that was the sequence of events.
    Good luck!

Maybe you are looking for

  • Error saving application in deploytool

    I get the following error when i try to save an application in deploytool, after making some changes. Error setting descriptor null in com.sun.enterprise.tools.deployment.ui.archivist.SunOneWebArchivist any ideas why the above error occurs?? Best reg

  • New downladed apps doesn't appear anywhere

    I downloaded apps this morning and they never appear on my ipad, i have return on the apps store it shows that i downloaded them but can't find them. thanks for all your help!

  • Re Download Purchased Songs after hard disc format

    Hello everyone i have a problem with my iTunes on my Macbook Pro...I had format my hard disc and my purchased music is gone... How can i re-download my lost music? Thanks

  • Re:Combining Sql Query

    hi friends         I am having 8 sql queries each query return some values i want combine the result of all the queries can you any one tell me how to do this is there anyother way other than union and normalaisation action to get the result after co

  • Using MDT and Thin installer on multiple servers

    Is there a way to configure the thininstaller.exe.configuration to point to a dynamic path.  We have multiple locations where MDT is deployed, and we don't want the PC to connect over our WAN links when the Thin Installer runs. I thought I read somew