Computer not responding during migration assist

I bought a 27" iMac and have been trying to use migration assist to transfer my files and settings over from my 17" MacBook Pro with little success. The iMac recognizes the MacBook and the confirmation code pops up on both but once the migration begins, the iMac has a message pop up that says the MacBook is not responding, even though it has a message saying that the iMac is ready.
I've tried searching other posts here but can't seem to find any with the same issue. Any suggestions would be appreciated.
Thanks.

Well, I was following the instructions as they were presented on the screen. As I mentioned, things seemed to progress normally, the two computers seemed to be communicating but then the message that the MBP was not responding would pop up and I would be forced to quit the migration.
I had tried both FW 800 and ethernet connections to no avail. After updating the iMac, I am running Mountain Lion on both machines and had consulted Pondini's guide prior to posting here. I also opened up all the sharing options I could find on both computers thinking that would help. I'll take a closer look at Pondini's guide and see if that provides some answers.
Thanks.

Similar Messages

Mail not responding after migration assistant to new mbp

I just got a new macbook pro, and migrated everything except applications via time machine from my old macbook (both with up-to-date snow leopard).
When i try to open Mail, it pops up saying it will import all my old mail - this completes and i press 'done' - however the main mail window pops up with an empty inbox and automatically i get the rainbow wheel which goes on indefinitely; more than an hour. I've tried several times and this is what happens, can't access anything.
How do i resolve this? is it best to delete all my mail first, open mail and then import from time machine? if so, how do i delete mail manually?

Not sure why this did not work. If you want to do over, then in the Finder remove the Mail folder at Home/Library/Mail, and the com.apple.mail.plist file at Home/Library/Preferences. Then copy those files from the time machine.
Ernie

Host Not Responding and Needs Assistance

I have a VMM 2012 R2 Cluster based on two nodes. Both nodes have similar hardware configuration. When I move the VMM Cluster to Node 2, I face an issue of
Host Not Responding and Needs Assistance on almost all Hyper-V Host Servers. But, When I move the Cluster to Node 1 off VMM, everything starts working and works undisturbed for days. What could be different
between two hosts that can cause such a behavior that causes connection loss and thus the above error in the console. How can I identify what is different in the first node from second node?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

My Mac does not respond during login

I am using OS 10.5.2
My iMac does not respond during login. After the desktop and dock are shown, the ball (cursor) keep rotating. I can do nothing except moving the cursor. All application including finder do not respond. Is there any solution?
Thank you very much.

Hi. Try doing a safe boot. Press the Shift button while turning on the computer. If you encounter the same issue, boot from the install disk (insert the disk that came with your computer and boot your computer while holding the C key) and repair the disk and disk permissions. Hope this helps

I have Win 7 64bit and the computer "not responding" often.

The event logs show that Bonjour is the biggest problem in system failures and the computer Not Responding. Is there a fix for Bonjour or is there a way to run itunes without it?
If itunes is not compatible for windows 7 Does apple have something else to use for media?

Hello AEC396
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting an errorabout missing drivers. I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

My time capsule mounts to Mac but is not displayed on Migration Assistant

My time capsule mounts to my Mac but is not displayed on Migration Assistant.
Very strange...there doesn't seem to be any issues with my Time Machine backup on time capsule, and I can easily access all files via Finder mounting the sparsebundle. However, when I try to fully restore the backup to my iMac, Migration Assistant cannot find any of the backups.
Any idea why?
Thanks!

Try preforming a factory reset and start over. This is explained at http://support.apple.com/kb/ht3728

HT4796 I can not get windows migration assistant to work on my Sony Viao running windows 7

I can not get windows migration assistant to work with Sony Laptop running windows 7.

Hello,
- What did you do so far ?
- Do you have any error messages ?
You will find a lot of useful informations on this page :
http://support.apple.com/kb/HT4796

Passcode does not display on PC during migration assistant

I am trying to transfer my information from my dell pc onto my macbook pro. My mac locates my pc and says "You need to verify that this passscode is displayed." However, while running migration assistant on my pc, my pc is stuck on "waiting for your mac to connect." Help?

How to Use Migration Assistant From PC to Mac 10.7 Lion
http://drtyhnds.blogspot.com/2011/08/how-to-use-migration-assistant-from-pc.html

IPhoto Not Responding after Migration to new MacBook

Gang,
I bought my wife a new White MacBook and I used the Migration Assistant to move her data from her old iBook. Everything went well except for iPhoto. When I opened it for the first time it started updating the photo library but it hangs at around 32 minutes remaining. In the activity monitor it goes red and says Not Responding. It has done this 4 time now even after reboots. Also, the photos did transfer over and can be seen in the Desktop/ScreenSaver Preference.
Any ideas how to get past this?
TIA,
James

Gang,
I have deleted the iPhoto Library and replaced it several times but each time when I open iPhoto on the new MacBook it wants to update the library and then after about 3 minutes it will hang. In the Activity Monitor the process turns red and reads (not responding).
This has been going on for two days now and it is the only thing I can not get working on her new MacBook.
On the old iBook iPhoto works just fine.
Any ideas???????
TIA,
James

Time Machine external drive not displayed in Migration Assistant

I have been suffering repeated lockups with my iMac, so I decided to bite the bullet and reformat the drive and restore from a Time Machine backup. I have been backing up to an external USB drive, not a Time Capsule. It seemed to be working fine and I have successfully restored the occasional file. However, having reinstalled Lion, the external drive was not offered as a possible source for restoration. Similarly, having chosen not to restore during reinstallation, I attempted to use the Migration Assistant: once again the external drive was not offered as a source. Luckily, I also had an up-to-date cloned drive that was offered and I managed a successful restore.
Can anyone explain why the external drive was not available as a legitimate source? Must I always use a Time Capsule for a full recovery?

It seems that
in order for Mac OS X to realize that it's a Time Machine drive, there should be an invisible "flag file" (0 bytes in size) at the root of the drive, called com.apple.timemachine.supported - if this file is missing for some reason, Migration Assistant won't pick it up.
not sure that it's true but worth trying.

Computer not responding anymore when accessing shared files (systemd)

Hi,
i upgraded my arch system which now uses systemd. An error appears when trying to access shared from vmware. It results in an no more responding arch Linux.
Mounting is done via
mount -t vmhgfs .host:/ /mnt/hgfs/
which gives the note that
Could not add entry to mtab, continuing"
I could afterwards continue. When changing to the directory e.g. trying do list the files the computer stops responding.
dmesg
gives the following errors..
[ 323.160271] BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[ 323.160280] IP: [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160289] PGD 25baf067 PUD 259c4067 PMD 0
[ 323.160292] Oops: 0000 [#1] PREEMPT SMP
[ 323.160295] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 323.160334] CPU 0
[ 323.160339] Pid: 811, comm: ls Tainted: G O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 323.160341] RIP: 0010:[<ffffffffa02a6986>] [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160345] RSP: 0018:ffff880025abbc68 EFLAGS: 00010202
[ 323.160347] RAX: ffffffffa02aa280 RBX: ffff88002c05a480 RCX: 0000000000000010
[ 323.160348] RDX: ffff88002c05a480 RSI: 0000000000000040 RDI: ffff88002c05a480
[ 323.160349] RBP: ffff880025abbc78 R08: 6f6c474458007471 R09: ffff880025abbde8
[ 323.160350] R10: ffff88003c4c400a R11: 0000000000000002 R12: ffff880025abbd30
[ 323.160352] R13: 0000000000000000 R14: ffff880025abbdd8 R15: ffff880025abbd38
[ 323.160353] FS: 00007f5f0bd6c700(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 323.160355] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 323.160356] CR2: 0000000000000078 CR3: 0000000025a9c000 CR4: 00000000000007f0
[ 323.160484] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 323.160506] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 323.160508] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 323.160509] Stack:
[ 323.160511] ffff880025abbdd8 ffff88002c207bc0 ffff880025abbce8 ffffffff8118b285
[ 323.160514] ffff880025a42420 ffff880025a42420 0000000200007471 ffff88002c05a480
[ 323.160517] ffff880025a27048 000000022994b100 ffff880000000028 0000000000000000
[ 323.160519] Call Trace:
[ 323.160531] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 323.160534] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 323.160538] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 323.160541] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 323.160543] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 323.160546] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 323.160551] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 323.160554] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 323.160557] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 323.160560] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 323.160563] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 323.160565] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 323.160568] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 323.160575] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 323.160579] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 323.160580] Code: 38 e8 e0 84 c0 75 9e eb 98 66 2e 0f 1f 84 00 00 00 00 00 66 90 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 85 f6 48 89 fb 74 06 <f6> 46 38 40 75 54 48 89 df e8 4c b7 ff ff 85 c0 ba 01 00 00 00
[ 323.160604] RIP [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160609] RSP <ffff880025abbc68>
[ 323.160610] CR2: 0000000000000078
[ 323.160615] ---[ end trace 658c53aa01f4c121 ]---
[ 323.160618] note: ls[811] exited with preempt_count 1
[ 348.089297] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 348.089303] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 348.089359] CPU 0
[ 348.089375] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 348.089378] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 348.089390] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 348.089392] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 348.089393] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 348.089394] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 348.089395] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 348.089397] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 348.089399] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 348.089400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 348.089401] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 348.089481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 348.089503] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 348.089505] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 348.089506] Stack:
[ 348.089508] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 348.089511] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 348.089514] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 348.089516] Call Trace:
[ 348.089524] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 348.089527] [<ffffffff8119df46>] mntput+0x26/0x40
[ 348.089531] [<ffffffff8118a342>] path_put+0x22/0x30
[ 348.089535] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 348.089538] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 348.089542] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 348.089548] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 348.089552] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 348.089556] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 348.089559] [<ffffffff8148931e>] no_context+0x264/0x290
[ 348.089562] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 348.089565] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 348.089567] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 348.089570] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 348.089576] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 348.089579] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 348.089584] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 348.089587] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 348.089591] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 348.089594] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 348.089598] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 348.089601] [<ffffffff81493165>] page_fault+0x25/0x30
[ 348.089605] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 348.089608] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 348.089611] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 348.089614] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 348.089617] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 348.089619] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 348.089622] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 348.089625] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 348.089628] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 348.089631] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 348.089635] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 348.089637] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 348.089640] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 348.089643] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 348.089645] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 348.089649] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 348.089650] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
[ 376.076524] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 376.076531] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 376.076599] CPU 0
[ 376.076605] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 376.076607] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 376.076619] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 376.076621] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 376.076623] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 376.076624] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 376.076626] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 376.076627] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 376.076630] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 376.076631] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 376.076633] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 376.076692] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 376.076753] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 376.076756] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 376.076757] Stack:
[ 376.076758] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 376.076762] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 376.076764] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 376.076767] Call Trace:
[ 376.076775] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 376.076777] [<ffffffff8119df46>] mntput+0x26/0x40
[ 376.076781] [<ffffffff8118a342>] path_put+0x22/0x30
[ 376.076786] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 376.076789] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 376.076793] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 376.076799] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 376.076803] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 376.076808] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 376.076810] [<ffffffff8148931e>] no_context+0x264/0x290
[ 376.076813] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 376.076816] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 376.076818] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 376.076821] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 376.076827] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 376.076831] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 376.076835] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 376.076839] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 376.076843] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 376.076846] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 376.076849] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 376.076852] [<ffffffff81493165>] page_fault+0x25/0x30
[ 376.076857] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 376.076860] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 376.076863] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 376.076866] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 376.076869] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 376.076871] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 376.076874] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 376.076876] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 376.076880] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 376.076882] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 376.076886] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 376.076889] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 376.076891] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 376.076894] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 376.076897] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 376.076900] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 376.076901] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
[ 383.143757] INFO: rcu_preempt self-detected stall on CPU { 0} (t=18000 jiffies)
[ 383.143768] sending NMI to all CPUs:
[ 383.143782] NMI backtrace for cpu 0
[ 383.143783] CPU 0
[ 383.143788] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 383.143789] RIP: 0010:[<ffffffff8103a6ec>] [<ffffffff8103a6ec>] default_send_IPI_mask_sequence_phys+0xbc/0x100
[ 383.143809] RSP: 0018:ffff88003f603d68 EFLAGS: 00000046
[ 383.143810] RAX: 0000000000000400 RBX: 000000000000b022 RCX: 0000000000000000
[ 383.143811] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000300
[ 383.143812] RBP: ffff88003f603da8 R08: ffffffff818a32b8 R09: 0000000000000000
[ 383.143813] R10: 0000000000010002 R11: 3a73555043206c6c R12: ffffffff818a32b0
[ 383.143815] R13: 0000000000000400 R14: 0000000000000092 R15: 0000000000000002
[ 383.143816] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 383.143818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 383.143819] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 383.143824] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 383.143828] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 383.143830] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 383.143831] Stack:
[ 383.143832] ffffffff00000000 0000000000000000 ffff88003f603dc8 0000000000002710
[ 383.143835] ffffffff81839dc0 0000000000000000 ffffffff81839e80 ffff880025aba000
[ 383.143838] ffff88003f603db8 ffffffff8103e5e7 ffff88003f603dd8 ffffffff8103a8aa
[ 383.143840] Call Trace:
[ 383.143842] <IRQ>
[ 383.143848] [<ffffffff8103e5e7>] physflat_send_IPI_all+0x17/0x20
[ 383.143851] [<ffffffff8103a8aa>] arch_trigger_all_cpu_backtrace+0x5a/0x90
[ 383.143857] [<ffffffff810e0f0a>] rcu_pending+0x24a/0x580
[ 383.143859] [<ffffffff810e23b9>] rcu_check_callbacks+0xd9/0x220
[ 383.143863] [<ffffffff81067808>] update_process_times+0x48/0x90
[ 383.143868] [<ffffffff810ae0e4>] tick_sched_timer+0x64/0xd0
[ 383.143871] [<ffffffff8107db27>] __run_hrtimer+0x77/0x270
[ 383.143874] [<ffffffff810ae080>] ? tick_nohz_handler+0x110/0x110
[ 383.143876] [<ffffffff8107e807>] hrtimer_interrupt+0xf7/0x230
[ 383.143882] [<ffffffff8149b0fc>] ? call_softirq+0x1c/0x30
[ 383.143886] [<ffffffff8149ba39>] smp_apic_timer_interrupt+0x69/0x99
[ 383.143889] [<ffffffff8149aa0a>] apic_timer_interrupt+0x6a/0x70
[ 383.143890] <EOI>
[ 383.143897] [<ffffffff81274859>] ? __percpu_counter_add+0x59/0xa0
[ 383.143902] [<ffffffff8119c0f0>] ? alloc_fdtable+0xf0/0xf0
[ 383.143907] [<ffffffff81082555>] ? lg_local_lock+0x45/0x50
[ 383.143910] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 383.143912] [<ffffffff8119df46>] mntput+0x26/0x40
[ 383.143916] [<ffffffff8118a342>] path_put+0x22/0x30
[ 383.143921] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 383.143923] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 383.143927] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 383.143932] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 383.143936] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 383.143940] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 383.143943] [<ffffffff8148931e>] no_context+0x264/0x290
[ 383.143946] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 383.143949] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 383.143951] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 383.143955] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 383.143961] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 383.143964] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 383.143968] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 383.143972] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 383.143976] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 383.143979] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 383.143982] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 383.143985] [<ffffffff81493165>] page_fault+0x25/0x30
[ 383.143989] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 383.143993] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 383.143995] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 383.143999] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 383.144002] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 383.144004] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 383.144007] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 383.144009] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 383.144013] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 383.144015] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 383.144019] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 383.144022] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 383.144025] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 383.144027] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 383.144030] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 383.144033] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 383.144034] Code: 90 8b 0c 25 00 b3 5f ff 80 e5 10 75 f2 89 f0 c1 e0 18 89 04 25 10 b3 5f ff 41 83 ff 02 44 89 e8 41 0f 45 c7 89 04 25 00 b3 5f ff <eb> 8a 4c 89 f7 57 9d 66 66 90 66 90 48 83 c4 18 5b 41 5c 41 5d
[ 383.144173] NMI backtrace for cpu 1
[ 383.144176] CPU 1
[ 383.144179] Pid: 0, comm: swapper/1 Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 383.144181] RIP: 0010:[<ffffffff81042e46>] [<ffffffff81042e46>] native_safe_halt+0x6/0x10
[ 383.144189] RSP: 0018:ffff88003daabeb8 EFLAGS: 00000246
[ 383.144190] RAX: 0000000000000000 RBX: ffff88003daabfd8 RCX: 0000000100006177
[ 383.144191] RDX: ffff88003dbb07e8 RSI: 0000000000000086 RDI: 0000000000000082
[ 383.144192] RBP: ffff88003daabeb8 R08: 0000000000000000 R09: 0000000000000000
[ 383.144193] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000001
[ 383.144195] R13: ffff88003daaa000 R14: 0000000000000000 R15: 0000000000000000
[ 383.144196] FS: 0000000000000000(0000) GS:ffff88003f620000(0000) knlGS:0000000000000000
[ 383.144198] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 383.144199] CR2: 00007fc28cd0b000 CR3: 000000003c672000 CR4: 00000000000007e0
[ 383.144241] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 383.144266] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 383.144268] Process swapper/1 (pid: 0, threadinfo ffff88003daaa000, task ffff88003da3c890)
[ 383.144269] Stack:
[ 383.144270] ffff88003daabed8 ffffffff8101dc2f ffff88003daabfd8 ffffffff818a32b0
[ 383.144273] ffff88003daabf18 ffffffff8101ef16 0000000000000001 2ebcddbd1c0fb65d
[ 383.144276] ffff88003daabf08 0000000000000001 0000000000000000 0000000000000000
[ 383.144278] Call Trace:
[ 383.144284] [<ffffffff8101dc2f>] default_idle+0x4f/0x290
[ 383.144286] [<ffffffff8101ef16>] cpu_idle+0xf6/0x130
[ 383.144290] [<ffffffff814812a9>] start_secondary+0x1f9/0x200
[ 383.144291] Code: 00 00 00 00 00 55 48 89 e5 fa 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <5d> c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 f4 5d c3 66 0f 1f 84
[ 408.063121] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 408.063127] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 408.063183] CPU 0
[ 408.063188] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 408.063190] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 408.063200] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 408.063202] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 408.063203] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 408.063204] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 408.063205] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 408.063207] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 408.063209] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 408.063210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.063211] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 408.063216] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 408.063220] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 408.063221] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 408.063222] Stack:
[ 408.063224] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 408.063227] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 408.063229] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 408.063232] Call Trace:
[ 408.063239] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 408.063242] [<ffffffff8119df46>] mntput+0x26/0x40
[ 408.063246] [<ffffffff8118a342>] path_put+0x22/0x30
[ 408.063250] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 408.063253] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 408.063257] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 408.063263] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 408.063267] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 408.063271] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 408.063274] [<ffffffff8148931e>] no_context+0x264/0x290
[ 408.063277] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 408.063280] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 408.063282] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 408.063285] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 408.063302] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 408.063306] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 408.063310] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 408.063314] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 408.063317] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 408.063320] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 408.063324] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 408.063327] [<ffffffff81493165>] page_fault+0x25/0x30
[ 408.063331] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 408.063335] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 408.063337] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 408.063341] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 408.063343] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 408.063346] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 408.063349] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 408.063351] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 408.063354] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 408.063357] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 408.063360] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 408.063363] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 408.063366] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 408.063368] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 408.063371] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 408.063374] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 408.063375] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
Anyone got an idea what to do? Would be nice to share files between the host and guest System...
Nik
PS: Read these two wiki pages already but nothing helps..
https://wiki.archlinux.org/index.php/In … _in_VMware
https://wiki.archlinux.org/index.php/In … _(systemd)
Last edited by nik1982 (2012-11-02 18:55:22)

I have the same problem. Here's what journalctl gives me after I try to list the directory:
Nov 10 14:56:31 porky kernel: BUG: unable to handle kernel paging request at ffffffffffffffa8
Nov 10 14:56:31 porky kernel: IP: [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: PGD 180e067 PUD 180f067 PMD 0
Nov 10 14:56:31 porky kernel: Oops: 0000 [#1] PREEMPT SMP
Nov 10 14:56:31 porky kernel: Modules linked in: fuse e1000 joydev ppdev intel_agp snd_ens1371 snd_ac97_codec ac97_bus gameport vmwgfx snd_rawmidi snd_seq_device snd_pcm ttm snd_page_alloc snd_timer drm snd soundcore i2c_piix4 psmouse parport_pc parport shpchp intel_gtt processor coretemp crc32c_intel microcode i2c_core pci_hotplug pcspkr serio_raw evdev vmw_balloon button ac container vmhgfs(O) vmci(O) vmblock(O) ext4 crc16 jbd2 mbcache dm_mod sr_mod cdrom hid_generic ata_generic pata_acpi usbhid hid sd_mod uhci_hcd ehci_hcd usbcore usb_common ata_piix mptspi scsi_transport_spi mptscsih mptbase libata floppy vmw_pvscsi scsi_mod
Nov 10 14:56:31 porky kernel: CPU 3
Nov 10 14:56:31 porky kernel: Pid: 753, comm: zsh Tainted: G O 3.6.6-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
Nov 10 14:56:31 porky kernel: RIP: 0010:[<ffffffffa02b9078>] [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: RSP: 0018:ffff88007665fe68 EFLAGS: 00010286
Nov 10 14:56:31 porky kernel: RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000002b5843
Nov 10 14:56:31 porky kernel: RDX: ffff880037b1ddf0 RSI: 0000000000000010 RDI: ffff88007b0f8000
Nov 10 14:56:31 porky kernel: RBP: ffff88007665fec8 R08: 0000000000016c20 R09: ffff88007f676c20
Nov 10 14:56:31 porky kernel: R10: ffffffff8118ae63 R11: 0000000000000004 R12: 0000000000000010
Nov 10 14:56:31 porky kernel: R13: ffff88007b0f8000 R14: 00007fe7e8ba7428 R15: 0000000000000000
Nov 10 14:56:31 porky kernel: FS: 00007fe7eb1bb700(0000) GS:ffff88007f660000(0000) knlGS:0000000000000000
Nov 10 14:56:31 porky kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8 CR3: 00000000767bb000 CR4: 00000000000007e0
Nov 10 14:56:31 porky kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Nov 10 14:56:31 porky kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Nov 10 14:56:31 porky kernel: Process zsh (pid: 753, threadinfo ffff88007665e000, task ffff88006d98e8d0)
Nov 10 14:56:31 porky kernel: Stack:
Nov 10 14:56:31 porky kernel: 0000000000000000 ffff8800379d4e40 ffff88007b0f8000 0000000200001001
Nov 10 14:56:31 porky kernel: 0000000000000000 ffff88007a41eab8 ffff88006d98e8d0 0000000000000086
Nov 10 14:56:31 porky kernel: ffff88007665fee8 ffffffff8107e056 0000000000000000 ffff88007b0f8000
Nov 10 14:56:31 porky kernel: Call Trace:
Nov 10 14:56:31 porky kernel: [<ffffffff8107e056>] ? hrtimer_try_to_cancel+0x86/0x110
Nov 10 14:56:31 porky kernel: [<ffffffff8118b79c>] __inode_permission+0x7c/0xc0
Nov 10 14:56:31 porky kernel: [<ffffffff8118b7f8>] inode_permission+0x18/0x50
Nov 10 14:56:31 porky kernel: [<ffffffff8117e2fd>] sys_faccessat+0xdd/0x1c0
Nov 10 14:56:31 porky kernel: [<ffffffff8117e3f8>] sys_access+0x18/0x20
Nov 10 14:56:31 porky kernel: [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f
Nov 10 14:56:31 porky kernel: Code: 90 31 c0 40 f6 c6 10 89 f3 74 63 48 8b 97 18 01 00 00 48 8b 02 48 39 c2 75 11 eb 67 0f 1f 80 00 00 00 00 48 8b 00 48 39 c2 74 0e <8b> 48 a8 48 8d b8 50 ff ff ff 85 c9 74 ea 48 85 ff 74 45 48 8d
Nov 10 14:56:31 porky kernel: RIP [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: RSP <ffff88007665fe68>
Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8
Nov 10 14:56:31 porky kernel: ---[ end trace d9bf986dbc6c4651 ]---

Computer not responding to video invitation

I have just purchased an iSight, am on a wireless broadband connection, and the camera works fine for preview on iChat.
However when I am invited or invite another iChat user with iSight for video or audio chat, my screen says it is "starting" the video or audio chat, but then says my computer is not responding. The other iChat users are successfully using their iSight cameras to video chat with each other.
I've gone through all the troubleshooting tips.
Any suggestions for why my computer is not responding? Is there an email address or phone number where I can communicate directly with support for iSight?

Hello ilovemac. If BriarCroft does not respond, or if his response does not help you, does your iSight work with other apps? (How to test your iSight to ensure it is functional) If so, your problem is with iChat AV rather than with iSight.
If your iSight does not work, contact the retailer who sold your your new iMac regarding warranty coverage.
If your problem is not with your iSight, both parties to this (or any other troublesome) chat should test with more than one other user to determine which end of the connection is causing your symptoms. If you do not have enough available buddies for testing, you can find more Buddy Names for iChat Test here.
If you cannot solve the problem after you have identified the problem system(s?), I suggest you start your own thread in the appropriate iChat AV Discussions so your problem gets specific, individual attention that is not commingled with someone else's similar problem.
To get the best help, please post back as much as possible of the information requested in When do I Post a New iChat Topic? for the system that is having problems, starting about half way down the page.
By my count, the list requests 20 items of information. (You may even find the problem in the process of gathering that info.) Also post the actions you have already tried to avoid getting the same recommendations that you already know do not work.
If both of you have problems, provide the info for both systems in the same thread.
If you have not already tried these suggestions, and if you want to exhaust all possibilities before posting in iChat AV Discussions, consider the relevant suggestions from Using iSight with iChat AV.
Your daughter can also include the suggestions from Help for iChat AV 3 Problems that are relevant to her Tiger (OS X 10.4.4) iMac.

Backup will not restore with migration assistant.

This is long and complicated but here goes. Had a 10.5 machine PPC that was backing up to a time capsule. IMac blew out PS so was toast. Took it home and took another iMac 10.5 machine that had a bad HD. Put new HD into that machine and installed 10.6 and then ran migration assistandt from the old iMac HD drive from the unit with the bad PS. The restored iMac with the new HD was a perfect close of the older iMac and everything was perfect. Took to customer site and they were happy. Time machine started backing up again to the same time capsule as before. It created a new backup image on the time capsule with the EXACT SAME NAME as the older iMac had. I did not know that until a year later when the new hard drive in the rebuilt iMac failed. I took a newer iMac of the Intel variety with 10.7 on it to the customer site. I told migration assistant to restore from the time capsule users and data file. I di not want it to restgore programs since I knew the ones on the newer iMac where newer versions and probably not compatible. Restore seemed to go just fine. Users were all there and desktop looked the same as the older iMac with the dead hard drive. I had to install a printer driver but all appeared okay. Customer called the day later and said all files for pages and numbers and address book appeared a year old at the newest. See where this is going.
I went to the site and started looking at the backup files on the time capsule drive. Taht is when I noticed that two exact backup named files existed. So I started drilling down through them ( Not using time machine casues it only had 1 day history on it ) and looked at the dates of the files. Sure enough, one of the backup images had files that had all ended a year ago when the original iMac blew out the PS and the other backup file with an identical name had files much more current in the current month and year. Simple I said to myself. I just happended to pick the older file to restore from. So I renamed the older file so I could not get them confused. Double checked that the one with the current files was named correctly. Went to migration assistant again and ran it again. Completed just fine but sill no file less than a year old. NOw I am really puzzled so I tried a test of one simple file to see if I was wrong in my assumptions. The address book file was one of the files that was a year old. I went to the time caplsule and drilled down to the exact file that address book makes. I had already thrown the corresponding file away on the new machine so I copied the file from the exact same location on the time capslue back up to the same location on the new machine. I then fired up address book on the new machine and the address book worked perfectly with the new and updated and current records.
So now I am sure that the drive image that I have been playing with on the time capsule has the up to date backups. But migtration assistant will not move them to the new machine. It will take a very long time to move every pages and numbers files scattered around in various folders to do this manually. What is wrong with migration assistant that it will not work correctly.

I am not asking if there is anything on the card. I'm not worried about the backup or recovering all of my information. I'm asking if setting up the replacement phone as NEW will change anything at all when I use the OLD sim card.

HT4796 Passcode will not appear on migration assistant of PC

I have a brand new iMac and am trying to transfer files from my old PC (Windows XP) to the new Mac. The passcode on the migration assistant of the Mac never appears on the migration assistant of the PC. I have the firewall off on the PC. What else do I need to do?

See related question - same type of deal. Need to get back notes from NotesV2.storedata...
https://discussions.apple.com/thread/6071302

Illustrator CS5 not responding during rendering

Hi,
I have a strange problem that I don't understand, maybe someone can help me?
I run Illustrator CS5 on a win7 64bits / i7 / 8 Go RAM / ATI Radeon HD 5470 and each time I want to apply a simple 3D effect (3D rotation), AI is freezing during the rendering... The aim is to do a disco ball by revolution of a half circle with a map art for the disco ball faces. Everything is OK until I try to change the disco ball perspective axis! Illustrator is not responding anymore and win7 ask me for closing the program.
I have already try different issues without success:
- change the scratch disk
- improve the performance : closing all running applications, simplify win7 display settings (disable aero,...), clean/defrag the disk, the register and memory, define a swap up to 24 Go
- ramdisk dedicated to readyboost, scratch disk of AI and swap
It usually freezes after 50% progression, with the optimized performance it goes sometimes until 90%...
Thank you in advance!

You simply have too many blend steps and it's running out of memory. Expand the "More" section to control that.
Mylenium

Computer not responding during migration assist

Similar Messages

Maybe you are looking for