Computer not showing ipad icon in my computer

My computer is not showing the icon of my ipad

Where were you expecting to see the icon? And please state your operating system - it can make quite a difference to any answer.

Similar Messages

HT4060 Ipad2 not showing changing icon

My iPads is not showing charging icon on right hand side at top when plug into mains charger.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

.bmp files do not show as icons in the event library - I am having to convert them to .jpg to achieve a display

Although .bmp files are to some extent supported, I find that on importing them they do not show as icons in the event library. I am having to convernt them to .jpg files to produce this result. Am I doing something wrongly, or is this the experience of others as well?

Yes - I've posted one of the files to Dropbox and it appears perfectly in picture form on my IPad. So it seems there is nothing wrong with the files. I'm even more puzzled now! I'll try to upload a smaller (less than 2mb) file here. The files I am using in the project, which is a kind of family history using stills, are a complete mix of types - tif, jpg, Canon raw(cr2), psd and bmp. Some, including, I suspect, many of the .bmps are scans from old prints, as this one.

Af:statusIndicator does not show busy icon when a command button is click

Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,

Can somebody please address this?
Thanks,

Outlook 2013 not showing attachment icon even tho there is one.

This quite a weird bug. Outlook 2013 is not showing any icons regarding attachments however there is an attachment!
Why is this happening? Any idea?
Best regards,
Aleksei.

Hi Aleksei,
This might has something to do with your current view setting to your folders. Please check if
Attachment has been added into "Show these columns in this folder" list in
Show Columns dialog:
Select the mail folder
Go to View tab on the ribbon
Go to View Settings>Columns...
Select Attachment from Available columns: list, then click
Add-> button.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Unfortunately, Attachment option is already selected and if I scroll down I see the icon on different emails.

When I connected iPhone 4,5 and 6 it's showing connected and working, only not showing wireless icon on top of screen

As per attached wireless design I have two outdoor access points connected to cisco 5508 controller, everything is working fine only problem is that when I connected iPhone 4,5 and 6 it's showing connected and working! only not showing wireless icon on top of screen (see the attached icon), but when I connected to Android like Samsung it's showing connected and showing icon as well top of screen.
Advanced thanks and highly appreciate

I have an iPhone 4, 5 & 6 and when successfully connected to the controller all does have the wireless icon on the top left. I don't think they are connected to the wireless... Might be associated, but not authenticated. Look at the client on the controller and see if they are in the policy state: RUN If they are not in the RUN state, then they are not connected.
-Scott

Video calls are not secure - not showing lock icon

Hi guys,
Calls between 9971/8945. Video calls are not getting secured.
video calls are not secure - not showing lock icon.
However audio calls are secure
CUCM Version : 8.6.2.22900-9
1 pub and 2 sub
Secured cluster : mixed mode
9971 : sip9971.9-3-1-33 - running version - same issue
9971 : sip9971.9-2-4-19 - old version - same issue
8945 : sccp8941-8945.9-3-2-11 – Running version.
Please suggest.
thx
Ashish

Would you be able to try 9.3(2) firmware or later? I checked with 9.4(1) and I see a lock icon when placing a video call on my 9971. According to the new and changed information 9.3(2) added additional support for when to display the lock icon,
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/932/release_notes/P567_BK_RD4ECA70_00_rn-9_3_2-8961-9951-9971_chapter_00.html#P567_RF_AB412E9F_00.

Firefox in Windows 7 under a proxy do not show many icons and images in Google applications. Reinstall it does not solve the issue.

Google applications (spreadsheet, ...) does not show the icons properly.
Only when hovering over the buttons, the tip appear and you can see what does the button.
Best regards

Hello all
Thank you very much!.
I have tried the solution and it worked perfectly, both for Google search "Images" tab and for Google Docs icons. The problem was in the Google images and icons permissions.
Other person in my company had the same problem and now it is solved. You have killed two birds with one stone (^_^).
Thank you
Koldo

HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.

ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc

Hey Sliqueg,
There are a few troubleshooting articles that can help resolve the issue. Check them out here:
For Windows:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
For Mac OS X:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Sincerely,
Delgadoh

Ipad 2 stuck on connect to itunes screen, computer makes sound when inserted but itunes does not show ipad???, Ipad 2 stuck on connect to itunes screen, computer makes sound when inserted but itunes does not show ipad???

I tried to restore ipad 2 with itunes, came up with an error 1015 i think. It now either shows a blank screen or the connect to itunes screen. When connected to computer it makes a low 3 beat sound (not normal when I used to connect would make different sound). Will not show up in itunes or on computer!!!? Please help

Connect the Device to the iTunes library you Usually Sync with, open iTunes, click on the Device tab that appears in the Left side column of iTunes, Select your Device, then go to the Summary Page and click Restore.
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

My iPad 4th gen does not show AirPlay icon can you help

IPad 4th generation is not displaying AirPlay icon that is supposed to be next to airdrop icon.
i Don't see any AirPlay settings available in settings,
i am running the latest software, what's going on Apple?

SO what you are saying the AirPlay icon is not visible until you have an airplay device active to hook up to,
this seems quite a ridiculous logic most people wouldn't even know they have AirPlay and what it is as it doesn't pop up anywhere in settings or on screen, seems to be a poor marketing decision again by Apple. When I bought my $1000 device I expected to be able to wifi to printers direct and to mirror to other devices without all this mess.
are you saying something better ic coming around the corner?

I uninstalled Foxrire because it is loading mulitble copies but NOT showing an icon.

Foxfire is loading multiable copies. If I open Foxfire it will show an icon. When I close Foxfire the icon is not shown. But if I try to un install Foxfire I get a dialog box telling me to close Foxfire. There is nothing to close. When I shut off my computer I see the Foxfire dialog box "Save files, Quit, Cancle" in the upper right corner for about 1 to 2 cseconds before shout down. Everything operates very slow.
I uninstalled Foxfire and I am using Internet Expolrer. Fix Foxfire.

You are in Recovery Mode. Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097

I'm subscribe creative cloud membership, but the individual membership limits to produce iPad only app. How can I solve this problem? DPS app builder is not showing ipad iphone option, and membership is requiring enterprise subscription.

Hi,
I'm operating digital publishing company, and I'm an individual subscriber of CC.
When I use DPS app builder for making ipad+iphone app, the DPS is only showing iPad option as default.
And it's not possible to enroll Newsstand app either.
How can I make ipad+iphone app which is fully supporting newsstand?
Is it possible upgrading from individual to professional/enterprise subscriber?

You will need at least a professional DPS account. Creative Cloud allows only single edition iPad apps.

AppleTv not showing ipad 3 and iphone 4s

I have a Apple Tv at home which is a one months old.
As Apple TV not showing both ipad 3 and iphone 4s ,
Now, the ipad 3 and the iphone 4s are both connected to the same network, as the apple tv is.
However, if i double click the home button, then swipe to the right so i see the iPod controls, there is no button for Airplay on either the ipad or the iphone.
I have no idea why, all are on the same network, and all are 100% up to date.
Airplay is already enable ..
Any suggestions? Many thanks

The ATV has never and likely never will show/recognize iOS devices.
The ATV is not running iOS 7.1. No such version exists, current version is 6.1.
What version iOS are the iPad and iPhone running?
Using Airplay: http://support.apple.com/kb/ht4437

Link not showing hand icon when mouse over

I am creating an image gallery and have thumbnails that open
in a separate window to a larger version of the image.
The links are working, but when you put the mouse over the
image the little hand does not appear to show it is a link, if you
click it works and the image opens, but the hand does not show,
what have I done wrong.

This implies that you have applied the behavior directly to
the <img> tag,
when you should have applied it to an anchor tag surrounding
the <img> tag,
e.g.,
this - <a href="javascript:;"
onclick="whatever"><img src="whatever"...></a>
rather than this - <img onclick="whatever"
src="whatever"...>
You can get this by manually creating it, or by selecting the
image,
removing the behavior, then entering "javascript:;" (without
the quotes) in
the Link field of the Property inspector. This will wrap the
<img> tag with
the anchor. Now select the <a> on the Tag selector, and
apply your
behavior.
As you can see, familiarity with HTML (and CSS) will come in
quite handy
when working with DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PosterP" <[email protected]> wrote in
message
news:g49sdk$gtp$[email protected]..
>I am creating an image gallery and have thumbnails that
open in a separate
> window to a larger version of the image.
>
> The links are working, but when you put the mouse over
the image the
> little
> hand does not appear to show it is a link, if you click
it works and the
> image
> opens, but the hand does not show, what have I done
wrong.
>

Computer not showing ipad icon in my computer

Similar Messages

Maybe you are looking for