Computer reboots as soon as I connect my iPod to USB 2.0
Here are my specs:
- I have the new iPod 60 GigaByte hardrive version.
- Operating System on my PC: Windows XP
- CPU: AMD Athalon XP 1.8 gHz
- My PC is several years old and has four built-in USB 1.1 slots. My iPod works on all of these USB 1.1 ports, albeit slow. (And when I connect iPod to these slots, I get the message telling me I have a high speed device connected to a non-high speed USB port, which I understand.)
- I just installed a Dual-Link USB 2.0 and Firewire PCI card (from ADS tech) into an empty PCI slot on my PC. It has 3 USB 2.0 slots and two Fire-wire slots. The card is properly installed because windows immediately recognized it.
Now, when I have tested two other devices on my new USB 2.0 slots. I have tested my mouse and a logitech gaming controller (although these devices are actually based on the older USB 1.1 technology), and these devices work in the USB 2.0 slots.
But, when I connect the iPod to any of the USB 2.0 slots, I get the little bell sound meaning that the computer is recognizing it. The iPod then displays the "Do not disconnect" message. But then the computer will begin rebooting by iteself. It will then attempt to reboot windows and almost gets there, but then reboots again. It continues this never-ending cycle of rebooting until I disconnect the iPod and then the computer reboots completely. Inserting the iPod will cause it to reboot again. This happens whether or not I have the iTunes program running.
Can anyone give me insight for resolving this problem? Has anyone else had this problem before?
Mine does this too. I've got an older IBM ThinkPad T30 with USB 1 built-in, running Windows XP SP2. So, I bought a PCMCIA USB 2.0 adapter card. All of my other devices (external hard drives, etc.) work just fine when they're plugged into it. However, when I plug my iPod into it, Windows shows a "blue screen of death" for just a second, then it reboots the ThinkPad.
I'm betting that it's a driver issue with the PCMCIA adapter card, so I'm going to start troubleshooting there. If I find a fix, I'll post it here!
Similar Messages
-
Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!
Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
http://www.apple.com/contact/ -
Computer shuts down ever time I connect the IPOD Touch
My computer shuts down every time I connect my Ipod Touch. I tried holdin down the On/Off button simultaneously with the Home button as suggested in the trouble shooting section, but the computer still shuts down. The battery is fully charged.
Hi. Actually, I have the same problem. I've had the same problem for about a month now. At first.. it took me a while to realize that my computer turned off because of my ipod being connected. Because at first, it took a couple of hours or so before it would turn off. But now, at for the past 3 weeks or so, it turns off instantly when I connect my ipod to my computer. I've been googling ways to solve this problem - but couldn't find anything, and that's where i ran into this topic.
I know the problem isn't my ipod and ipod usb wire. I connected it to another computer to recharge, and it didn't turn off, and there were no problems. But when i connect it to my computer to update it, it turns off instantly. It doesn't even have time to update.
My CPU has 4 USB ports, and I tried connecting it to each of them.. but the same thing happens. I don't think it's my USB ports either, because i've connected other things to the USB ports, and the computer didn't turn off like it did with ipod.
I'd really appreciate it if an answer could be received regarding this issue.
Thanks.
Message was edited by: CrystaliqueFiary -
I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
As soon as i connect my ipod classic it ejects itself
please,how do i stop my ipod from ejecting itself?
Hi,
Apple support has fixed this issue for me as it seems to be a common issue with itunes 11.
Go to top left of itunes and select "show menu bar" - this will then display "file, edit, view..." menu on top left.
Go to view and select "show sidebar" and then connect your ipod. This should now work for you.
Apparently with the hidden sidebar the very first time you connect it has a hard time recognising it. After you follow the above steps and connect the first time you will no longer have this issue and you can connect the ipod and keep the sidebar hidden in the future.
Hope this helps. -
Connection between ipod and usb cord and computer or electrical plug
The usb cord that came with my IPOD got damaged and I bought a new one. When i connect my Ipod the screen is frozen and I am not getting a connection. It won't come on and I can hear it trying to connect. When it does flick on it will show the battery lightly lit up with the symbol. Please help.
I also love how no one knows how to fix this because Apple apparently only likes cash in order to help with anything. Thanks Apple for being such a great company and having all of your trust and knowledge with one person. Oh wait, he died. Have fun decoding all of his brilliant knowledge while everyone you graciously market to realizes that other companies are now almost equal rivals and cheaper. I mean honestly. Honestly.
-
I have the latest 64-bit version of iTunes on Windows 7 Ultimate. Everything was fine until recently. Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message: "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes" I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities. Same message appears when I plug in my iPod. Any help would be greatly appreciated.
Did you try removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
My computer does not recognize when i connect my ipod
My son't friend gave him a used iPod touch and when I plug it into the computer i get a message that the usb device is not recognized. Does this mean the iPod is messed up or is there a disc that needs to be installed? Also when I turn on the iPod it shows connect to iTunes and a lock symbol. The screen doesn't change or ask for a password. Any help will be appreciated.
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I'm having problems with my ipod. Everytime I connect it to my computer, itunes crashes and it says that the device is not recognised. Any suggestions pleeease?
HI, if anyone can help, I appreciate it, I tried to
return it but lost the receipt and I bought it a week
ago so that kinda stings. Ok my PC froze today like
it did a million times before and I had to restore
it, after I restored it I tried to hooki up my ipod
and it said usb device not reconized. When I clicked
on that it said device is not reconized by windows. I
tried different usb ports and the same thing keeps
happening, but the ipod works when I hook it up to my
360 and all my songs are still on there. I also tried
re installing itunes and that didn't work either. If
anyone knows what I can do please help. Thanks.
I just got home from my dad's house and my ipod works fine on his PC, so I thought maybe my usb ports are faulty but all my other devices work on all my ports, the only thing that dosent work is my pod, so my pc isn't busted. If anyone knows what I can do please let me know, thanks for the help. -
how do i whipe out my ipod 4 generation
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
or maybe:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My computer crashes when I connect my iPod via usb
I have a number of iPods. 120GB iPod classic is my main one. Have used it on the same Windows XP for a number of years. I sync on average 1-2 times a week. All of a sudden when I connect via USB the computer crashes. Same thing happens with my other iPods. Tried different USB ports. Same thing. Have tried other USB devices, no problem.
Have upgraded to latest version of iTunes. Same problem.
It appears the issue is with the Apple USB driver....? Just wondering if someone has seen this problem and has a work around for it.Hi there bippycrisps,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
http://support.apple.com/kb/TS1502
-Griff W. -
How do I authorize my new computer so I can access the songs in my library? Also, the books that I had downloaded from Audible are no longer in my Library. I still have an early version of the Ipod Nano and want to add music to my Library and sync all of the music to this nano.
follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
stopped working. I run Windows 7 Home Premium and Itunes v10.2.1.1. Windows tries to say that if it can find a solution it will, but it never does. Very frustating indeed...
Any ideas anyone!
StuartYour Windows 7 should be recording additional information about those.
Head into your Action Center, find your Problem History, and look for iTunes problem reports generated at the time of the errors. Open them up and have a look through.
Do they all seem to be saying pretty much the same thing? If so, paste the contents of a typical problem report into a reply here so we can have a look. -
My CMT-X3CD personal audio system won't connect my ipod using USB cables
My new CMT-X3CD personal audio system cannot connect to my Ipod.I have tried numerous USB cables - one doesn't register at all, the other charges my ipod but doesn't play through the system, and a third just "searches" for the USB device. Any ideas please??
Hi ppatrick,
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution" -
can anyone help me?
Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
Hyperlinks in pdf document prepared in Illustrator
Hello ! Since this is my first post here I would like to greet everybody on this forum! I have a question as in the subject, is it possible to create interactive pdf document only in Illustrator? (I actually just wont to add few links to www addreses
-
Where can i get Third party plugIns of Print Service
JPS----Java Print Service API has provided the Service Provider Interface through which plugins can be created to provide ones own implementation of the PrintServiceLookup........i am unable to locate any such print service Api thru NET..if somebody
-
OLAP data from MS SQL to Oracle
Hi, I am currently using Microsoft SQL server 2000 as our datawarehouse with Analytic services(OLAP data). We are thinking of migrating to Oracle 10g. By using Migration Workbench, will it migrate my 3 dimensional data(OLAP) from MS SQL to Oracle (OL
-
Why can't I scroll down on windows of certain sites? Like the new BMO site!
Why can't I scroll down on windows of certain sites? Like the new BMO site! Please help, I'm going crazy!
-
How to achive Java DB like loggin in oracle?
Please help me, i'm new to oracle and don't know how to achive my goal. In derby my log files presents me all the information i need for researching purposes. The same can be achived via auditing in oracle i guess. So my starting point is: I activate