Computer Reboots when the Reader is ran

We have a client that uses a Adobe Reader 9.2 from a website.  When a report is generated and pulled up, it will come up fine the first time.  The very next time its pulled up, it will reboot the computer.  Then it will again work 1 time and reboot on the 2nd try.
Even if i'm double clicking the 9 icon, it will open the first time fine, then reboot the pc on the next.  I've tried to uninstall /reboot/ reinstall.  Even tried using a older version.
Has anyone seen this before.  It does it with any profile on the PC also.  XP SP3, Dell Optiplex Gx620, 2 gig mem
I've even installed a free pdf reader and it works fine, but most of the programs they use, require Adobe.
Thanks in advance!!!
Richie
Please email me if you have any ideas.

It doesn't even have to be in the browser, cause it does it when I just open if from the program menu.  But it is explorer 8
Thx
Richie Boyd
Technician, A+, Network +
Cornerstone Information Systems

Similar Messages

  • Bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb)

    bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync, a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb required)

    Hi Terri 4514,
    If you are having a "free space" alert when you try to sync, you may find the following article helpful:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    Regards,
    - Brenden

  • Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?

    Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?
    It starts up and asks for a language. After English, it goes to the OS X Utilities screen. I have gone to disk utility and verified the disks. They both say they are okay. If I click repair, it comes back with an error saying "Live file system repair is not supported." I just want my computer back to normal! Please help! I am still in Mavericks if it matters.

    Do you have a backup? If so, in the Recovery Partition go to Disk Utility/Erase, select Mac OS Extended (Journaled), click Option GUID, and erase the disk. Then re-install the OS. Reboot and use Setup Assistant to recover your data.

  • How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

    How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear.  You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location.  THANK YOU!!!!!!

    Have you tried Word for Mac?
    You will need to test if links survive export or printing to .pdf
    Peter

  • How do I insert an audio in html? When the reader access the widget it will be transferred to a page in Safari?

    How do I insert an audio in html?
    When the reader access the widget it will be transferred to a page in Safari?

    See iBooks Author: About HTML widget creation

  • Can read sharred variable only when the vi is ran a second time

    In an initialization VI, a shared variable is populated with information from a config file. There is no problem here. The variable is written to. However, when I read from the shared variable in a second vi, the variable only appears to have content the second time the vi is open and ran. First time the vi is open an ran, it errors, saying the shared variable is empty. I tried saving the shared variable library, click deploy and even auto deploy on the library and then saving the project, but nothing happens. Any experiences, tips, ideas or handfulls of money that may help?

    You have not specified whether you are creating a single-process shared variable or a network published. In both cases, LabVIEW creates the 'client-side' buffer the first time a Shared Variable node
    attempts to read from the shared variable. This behavior
    results in a value not being read the first time or a slighlty longer time on the initial execution. Try to read the variable at least once outside the loop to 'warm up' and then read inside the loop. Have a look at the following article:
    Using the LabVIEW Shared Variable
    Let me know if that helps or if you have additional questions.
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Computer reboots when connecting ipod to USB cable.

    Has this happened to anyone else?
    All of a sudden now, whenever I connect my ipod to the USB cable, it makes my computer reboot! And it doesn't stop rebooting until I disconnect the ipod!
    I have no idea why this is happening, and I don't know how to make it stop.
    I am really starting to lose my faith in EVERY item that Apple has created.

    When I connect my ipod to USB immediately following taking it off my AC adapter, it causes my computer (PC, XP) to restart.
    Reinstall Windows. This has nothing to do with iTunes or any other Apple software, because that functionality is entirely Windows based.
    If reinstalling windows fresh (and doing all the updates) doesn't fix it, then you have a hardware problem on the PC.

  • My computer reboots when i try to open itunes,i tried to uninstall and reinstallitunes but when i try to do either my computer reboots also.

    when i try to open itunes my computer reboots. i have tried to uninstall and reinstall itunes but when i tried either my computer also rebooted.

    Are you getting any sort of blue screen when the PC restarts? If so, what numerical and textual codes are you getting for it?
    (For example: STOP 0x00000023 FAT_FILE_SYSTEM)
    If the blue screen also mentions a specific file, let us know what the file is called. (Precise spelling please. Include filename extensions like .sys or .dll ... for example, "atiduag.dll".)

  • Computer reboots when exporting video file as mp4

    My computer has the following hardware.
    MSI X58 Motherboard
    i7 Processor
    12 meg ram
    Gigibyte GTX 570 videocard with latest driver
    500 Gig SSD hard drive
    Windows 7 64 bit
    Premier Pro CS6.0.5
    When I try to export my video work area as a H.264 1080i file my computer reboots just like I had pressed the reset button.
    Is anyone else having this problem?

    Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169 to see if that previous discussion will help

  • Computer reboots when Max is opened

    With NI-Daq installed the computer reboots anytime Measurement and automation is opened. I have tried NI-Daq versions 6.8, 6.9.3 and 7.4. It doesn't matter if the PCI-MIO-16E-4 card is installed or not. If Ni-Daq software is installed, the computer will reboot when Max is opened. Uninstall Ni-daq and no issues are noted. I can communicate with a PCI-GPIB card just fine. This is on a Windows 2000 machine and it worked fine. Came in one morning and this just started happening.

    Hello,
    Try uninstalling NI-MAX and all associated drivers. Go ahead and delete the MAX forder at: C:\Program Files\National Instruments\MAX when you have finished. Then install NI-ADQ 7.4. This should fix the problem.
    Let me know if this issue continues.
    Regards,
    Sean C.

  • Msi gtx 970 gaming 4gb lose display and then computer reboots when EXITING games

    When the graphics card is no longer under stress the display will lose signal and usually the computer reboots seconds later. During use, the card performs perfectly. I have a second computer so I have already tried the card with a different motherboard and power supply, with the same problem. There isn't an error message but checking the event log it states a sudden and unexpected loss of power had occurred. My power supplies are both new and gold rated. My drivers are current and the bios is the latest released (the one with the patch for the fans). I'm at a loss to explain the problem and will RMA as a last resort. Any ideas guys? Thanks

    Quote from: JLio01 on 19-December-14, 09:35:32
    Use Afterburner and check "Force Constant Voltage" in their Settings. I think what causes these are the power saving sort of designs for both the mobo and vga, tbh, which makes the voltage more unstable. I think check this would help the problem a bit. Maybe you guys can try.
    I figured that it was an issue with hardware stepping down  to save power and I've forced voltage to remain constant but the crash still happens unfortunately.

  • Computer reboots when I connect my iPod to a USB 2.0 slot

    Here are my specs:
    - I have the new iPod 60 GigaByte hardrive version.
    - Operating System on my PC: Windows XP
    - CPU: AMD Athalon XP 1.8 gHz
    - My PC is several years old and has four built-in USB 1.1 slots. My iPod works on all of these USB 1.1 ports, albeit slow. (And when I connect iPod to these slots, I get the message telling me I have a high speed device connected to a non-high speed USB port, which I understand.)
    - I just installed a Dual-Link USB 2.0 and Firewire PCI card (from ADS tech) into an empty PCI slot on my PC. It has 3 USB 2.0 slots and two Fire-wire slots. The card is properly installed because windows immediately recognized it.
    Now, I have tested two other devices on my new USB 2.0 slots. I have tested my mouse and a logitech gaming controller (although these devices are actually based on the older USB 1.1 technology), and these devices work in the USB 2.0 slots.
    But, when I connect the iPod to any of the USB 2.0 slots, I get the little bell sound meaning that the computer is recognizing it. The iPod then displays the "Do not disconnect" message. But then the computer will begin rebooting by iteself. It will then attempt to reboot windows and almost gets there, but then reboots again. It continues this never-ending cycle of rebooting until I disconnect the iPod and then the computer reboots completely. Inserting the iPod will cause it to reboot again. This happens whether or not I have the iTunes program running.
    Can anyone give me insight for resolving this problem? Has anyone else had this problem before?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Why does the computer reboot when I plug in my creative ZEN?

    I have used this mp3 player in computers before. I am on a new computer. I installed the creative hardware, but the second I plug my mp3 player into the computer it reboots and won't load up until I unplug it again. I know it's not an issue with the USB port because I tried more than one and checked to make sure they worked with other things. Why won't the computer read the mp3 player without restarting?

    More information:
    The last event before it shuts down:
    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000050 (0xb5a9f897, 0x0000000, 0xf89788e4, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini08009-09.dmp.
    Can I stop this "bugcheck" from happening again?

  • TS2634 I cannot print from my ipad. The wireless is connected, I have no trouble printing from my computer. When the ipad looks for the printer it comes back with the message. "Air printer not found" What can I do to correct this? P S Ipad2 is only 1 mont

    I cannot print from my ipad. It is connected to the wireless okay. I have only had this ipad for a month and while I am not sure I think it has been okay to print before 2 days ago, when I tried to print and I got the message "Airprinter not found" Has anyone experienced this and if so what did you do about it? I have no trouble printing from my computer.

    ... Has anyone experienced this and if so what did you do about it?
    I rebooted my Airport Extreme.
    Try rebooting your router. Make sure its firmware is updated.

  • Computer reboots when i launch iTunes

    Almost every time i run iTunes (70-80%) my computer imediately reboots, just like presing the reset button.
    Aparently something causes a Windows Stop Error witch reboots the system to protect it.
    After the reboot a get a Microsoft Crash Analisys window asking me if i want to report this problem. In the details window i get the following error info:
    BCCode : 10000050 BCP1 : BB9EA29E BCP2 : 00000000 BCP3 : 80580A1C
    BCP4 : 00000002 OSVer : 512600 SP : 2_0 Product : 256_1
    I have this problem for some time now, even when i was using iTunes 4. With iTunes 5 and 6 the problem just persisted... I even uninstalled iTunes and reinstalled it from scratch, but the problem remains.
    I can't figure out what exactly causes the Windows Stop Error. It's quite frustrating since i can't update my iPod because of this problem.
    Any help would be greatly appreciated. I'd hate to reinstall the whole system especially since i'm not sure it will solve the problem...
    P4 3.2ghz, nVidia 6600GT 128mb   Windows XP Pro  

    No, sorry to say. I had no ideas. Well - OK, one idea - bring up Task Manager > Processes before you start iTunes and see if anything shows up there. But that seems futile, given the PC boots.

Maybe you are looking for

  • Zen Vision: M problem turning

    Hi, Last night my Vision M stopped working. Here is what is happening, any advice anyone can give would be GREATLY appreciated. When I try to turn it on one of two things happens. Most of the time, NOTHING happens, no lights, nothing. Sometimes, and

  • MM -live issues

    Hi all Would any one address some of the Material management issues while going in live part ? if pls mail at the following mail id :[email protected]

  • BPM with EP

    Hi, If anyone is having documents related to BPM and ep integration and how they works togather. How BPM dashboard works in ep and how to costomised that. Kindly share the documents.. Many Thanks Mahendra

  • AIP SSM Command/control Interface is not coming up

    Hi to all, kindly be informed that , i have AIP SSM for ASA, i configured it and its workign fine.but its command control interface is not coming up at all, i connect my lap top direct to AIP management interface but its status is always is down.kind

  • [Urgent] plz----Project Renaming

    hello! I have tried most of the things like Making a new folder & then Putting the whole project in that by renaming it! but it Did'nt work! Even when I renamed it & then run then also it was still Taking the old name. Does anybody know how to rename