Computer requires the update described in Microsoft Knowledge Base article KB2619234

I have a Windows 2008r2sp1 server that I would like to setup a test environment for Exchange2013. I have tried to install the prerequisites in the technet article here (technet.microsoft.com/en-us/library/bb691354). But when trying to install
the HotFix (437878_intl_i386_zip.exe) I am told that "This update is not applicable to your computer". I tried to run the Exch2013 Install anyway after a few minutes it too tells me that "This computer requires the update described in
Microsoft Knowledge Base article KB2619234" and I have downloaded the file a second time and rebooted multiple times as well, but cannot seem to get past this HotFix install. Can anyone tell me what I missed?

Is Windows Update is UpToDate? Try install all the required Update and reboot the server and check the issue.
If that doesn't help then I think you should give a try at Windows Forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winservergen
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

I have the problem described in /forums/knowledge-base-articles/704725. (Firefox is already running but not responding). My only solution is to use Task Manager to end the firerfox process. I am the only user and there are no other profiles on my system

Occasionally I have the problem discussed in /forums/knowledge-base-articles/704725 , Firefox is already running. My only fix is to use Task Manager to end the firefox process. At such tmes, I have no other instances running.

'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
This is not a cure but will make it easier if Firefox locks up.

HT4623 Now that iOS is consistently being updated. Will the 1st Generation IPad be stuck with IOS 5? Eventually my IPad will be good for nothing as Apps start requiring the updated software.

Now that iOS is consistently being updated. Will the 1st Generation IPad be stuck with IOS 5? Eventually my IPad will be good for nothing as Apps start requiring the updated software.

The iPad 1 can only be updated to iOS 5.1.1. This is unlikely to change.
The apps you have will continue to work and there are still many apps which run on iOS 5 (or even earlier iOS levels).

HT200113 the update all command given in this article is incorrect.

the all flag requires a double dash
softwareupdate --install --all
rather than the single dash given above
If the single dash is given, softwareupdate will list the available updates, but will exit without installing.

Nobody on these boards can change a Knowledge Base article. Click here and fill out the form to contact the people who can.
(112775)

Time Machine Knowledge Base Article Ineffective?

Hello. I'm still unable to see past backups using Time Machine in some folders, and I've followed the knowledge base article to the letter. The folder appears at the correct time and day of the backup, but it's empty. I've also followed other suggestions in discussions that deselect the external drive, reselect the drive, eject, restart the computer, etc., but to no avail.
What's interesting (and frustrating) is that the fix from the knowledge base article worked for a few days, but now I'm back to square one.
Can anyone help? It would be much appreciated, because I'm completely stumped.

crinsf,
Well, I'm assuming that your problems are related to the "unknown" user or group ID problem that surfaces when one upgrades from Tiger to Leopard, as opposed to installing Leopard "from scratch."
Without going into all the gory details, suffice it to say that it is not an insurmountable problem. I'm not sure exactly how your backup may be affected, but we can certainly correct what is probably the root of the problem by running a command or two on your HOME folder. We can deal with the Time Machine backup afterward if it seems necessary, although I hesitate to do so.
First, let's establish that all of your files are properly located in your HOME folder. Also, that you are an admin user. Can you assure me that both of these statements are correct? If so, proceed with the rest of my instructions...
Open /Applications/Utilities/Terminal. At the prompt, copy and paste the following text into the Terminal window, then press <RETURN>:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R `id -u`:`id -g` /Users/`id -un`</pre>
When you press <RETURN>, you will be asked for your admin password. Enter it (it will not be echoed) and again press <RETURN>.
If you are just now starting out with Time Machine, it may be easiest to simply delete your current Time Machine backup and start over, after you have run the command above. Since whatever backups that currently exist are incomplete, there's really no sense in keeping them. Just start over, and make sure everything is being copied properly this time.
If there are additional users on your machine, we will need to use other methods (which result in the same "fixes") to correct the problems there.
Scott

What happened to these knowledge base articles?

I work in the Information Technology infrastructure department of a medium-sized media company. My employer still makes heavy use of Adobe Creative Suite 2, despite its age. This is due to both compatibility and cost factors associated with upgrading all of our designers to new Macs with CS5.
Frequently, our Adobe CSx users complain about being unable to modify server-side files in Photoshop because it reports that the files are locked. The specific error they receive is "Could not complete the request because the file is locked". In the past, I found the following Adobe Knowledge Base articles for the varoius releases of Photoshop:
7.x - CS: http://kb2.adobe.com/cps/322/322291.html
CS2: http://kb2.adobe.com/cps/332/332534.html
CS4 - CS5: http://kb2.adobe.com/cps/406/kb406794.html
All three articles were nearly identical to one another, with the only real difference being in the "products affected" section. If you follow those URLs, you will find that only the last one for CS4 and CS5 is working. We found that pointing users complaining of the file locked error in Photoshop was a massive help to our case that users should copy the files locally, modify them, then copy them back to the server. Once they saw the words from the horse's mouth, they stopped bugging us about the problem or accusing us of not knowing what we were doing.
Just today I had another CS2 user complain about this problem in Photoshop. I went to give him the above URL for CS2, but decided to click the link first. I found that it gave me a HTTP 404 "page not found" error. I found the same thing with the 7.x - CS article. As I said previously, we rely heavily on these knowledge base articles for backup on the information we were giving to the users on this issue. We did not keep a PDF copy of the KB articles.
I understand that the versions 7.x - CS2 are old, but I have located other CS2 knowledge base articles that are still up. I have also discovered a Japanese language version of the CS2 article I am looking for that is still published (http://kb2.adobe.com/jp/cps/231/231270.html). Does anyone know where I might find the missing KB articles? Would it be possible for me to contact Adobe directly? We do not have an active support agreement.
Scott W. Sander

Many of our users are not sophisticated enough to try to search vendor knowledge bases for solutions to their problems. It seems almost everyone submits helpdesk tickets to us for every problem they experience. We have previously explained that the problem is inherent in the product, but it was not until we supplied the actual knowledge base articles from Adobe that it quited the users down. They simply did not believe us and assumed we were incompetent because we were not able to solve the problem for them.
As for the CS4/CS5 link, thank you. You are correct. I had pasted them in from an old e-mail but the formatting was screwed up so I retyped them all manually and seem to have made a typo.
The suggestion about keeping the KB articles offline now is a good one. I thought of that already and did previously save a copy of the CS4/CS5 article as a PDF before I created this thread. The suggestion of modifying the HTML of the CS4/CS5 article to include the other versions is also good one, and I will probably do that. But I still wish I could somehow access the real KB articles. As I said in my first post, we found that users hearing it from the horse's mouth was really the only way to get them to believe us in most cases. Of course, maybe they won't know the difference with this custom PDF. It just seems a bit dishonest and there is a small risk of being caught.
I don't understand why Adobe would remove the articles for 7.x - CS2, even if they are old and not officially supported anymore. Heck, CS2 was released in 2005 and there are Pagemaker articles still published and the last version of that was released in 2001. What is laughable is that there is a link on the error pages to report a broken link, but if you click that all it does is take you to the normal support portal where there is no place to report broken links.
In any case, I will create the custom PDF but if anyone has an archived copy of the missing KB articles or knows how I might be able to get them from Adobe, please let me know. Thank you.

I downloaded latest versionof Firefox from Mozilla web page, I rebooted my computer. The update did not take effect. How make late version active ?

My present version of Firfox is 3.5.15
My Op. System is Linux Fedora version 12.
Two days ago when I opened a file in a web search for Mercury Scientific Thermometers, the web page for NovaTech International-USA opened.
Centered in the middle of the page was a screen message reading
"Error: form not found." There's an X in the upper right corner of this small screen. There's an "OK" within the screen. Clicking on either of those optons does nto close the small screen. AND, clicking on any Menu
choice at the top of the main screen produces no action. File Edit View History Bookmarks tools Help are all unresponsive. The screen is
locked to the Cursor and Clicking any menu item. Tho' there are many choices on the Screen for various types of thermometers no choice responds to a click.
I closed down the computer. ThenI did a Cold Boot. There was no
change in the situation described above. The screen appeared again if
I chose to open Firefox.
I use 8 virutal screens. By which I mean I can have 8 screens open at a time. All 7 of my other available screens are perfectly active and perfectly normal in their behavior.
Rebooting changes nothing---the unwanted frozen/locked screen appears again if I attempt to open Firefox.
I opened the Firefox website. I soon found how to download the latest version of Firefox. But I used YUM to download it. Here is an excerpt of the Yum process:
[William@WilliamsComputer ~]$ su
Password:
[root@WilliamsComputer William]# yum install firefox
Loaded plugins: presto, refresh-packagekit
adobe-linux-i386 | 951 B 00:00
updates/metalink | 2.8 kB 00:00
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package firefox.i686 0:3.5.15-1.fc12 set to be updated
--> Processing Dependency: xulrunner >= 1.9.1.15 for package: firefox-3.5.15-1.fc12.i686
--> Running transaction check
---> Package xulrunner.i686 0:1.9.1.15-1.fc12 set to be updated
--> Finished Dependency Resolution
Skipping here much of the YUM processing.
Note the finishing YUM statement:
Dependency Updated:
xulrunner.i686 0:1.9.1.15-1.fc12 Complete!
[root@WilliamsComputer William]# exit
[William@WilliamsComputer ~]$
I did a cold reboot of my computer.
In the Downloads Folder The Firefox update appeared.
But when I opened a Firefox page and clicked Help-About Firefox
the version of Firefox was still 3.5.15 AND the unwanted, Locked,
Frozen Novatech-International---USA Screen was still present and still
locked.
Please teach me the preferred way to Update Firefox and once the Updates have been downloaded, how do I activate those updates?
Many, many thanks,
William
Florida

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Itunes 9 demande la mise à jour de safari ...Itunes 9 requires the update s

Bonjour ;
J'ai télé portée ITUNES 9.01.
Itunes a demandé les mises à jour successives de JAVA jusqu'a la version 11.9.0
Maintenant ITUNES me demande de faire la mise à jour de SAFARI vers la version 4.0.3 pour pouvoir visionner les films.
Quand je demande la mise à jour de safari version 3.0.4 le programme de mise à jour me signale que la version est à jour et refuse d'aller chercher la version 4.0.3.
Merci de me sortir de ce merdier.
Ma configuration :
Tiger 10.4.11 sur un G4 bi Proc 125 Ghz 1 Gb de ram
Cordialité.
Jean-Pierre.
Hello
I have tele range ITUNES 9.01.
Itunes required the successive updates of JAVA to version 11.9.0
Now ITUNES requires of me to make the update of SAFARI towards version 4.0.3 to be able to view films.
When I ask for the update of safari version 3.0.4 the program of update announces me that the version is up to date and refuses to go to seek version 4.0.3.
Thank you to leave me this mess.
My configuration:
Tiger 10.4.11 on G4 Bi Proc 125 Ghz 1 GB of RAM
Cordiality.
Jean-Pierre.

http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Safari4/061-6725. 20090811.CfPol/Safari4.0.3Tiger.dmg
Try the above link. I am not sure if it will work because I had to get it by starting to download Safari for my computer. I can't find a direct link

HT6065 Just got my computer and the update won't install.

It says it needs to restart and I install, agree and restart with the restart it through the program, but it doesn't restart. I can restart it but it still says there is an update when it turns back on. Not sure how to get my update to install.

1. Did you complete the Setup Assistant?
     I wasn't acutally the person that turned on and set up the computer for the first time, but I am thinking that it wasn't done.
2. Are you able to shutdown the computer?
     Yes
3. When your restart the computer exactly what happens?
     Normal restart stuff. Turns off then a gray screen then it loads the login screen.
4. From where did the software update notice come?
     The App Store
5. What application says there is an update?
     Macbook Pro Retina (late 2013) Software Update 1.0
     MacBook Pro EFI firmware update 1.3
     OS Update 10.9.1
I choose the update button in the App Store, it has me agree to the licensing agreement and says I need to restart the computer. I hit enter to restart the computer and then nothing happens. It doesn't restart but the button to click to update then says updated. Upon restarting the computer from the drop down apple menu the app store opens and says I need to update still.

I have update 4 for icloud on my windows 7 computer but the update will not install. I have been weeks trying manually as advised and the download and install that pops up most days. Nothing works. I also have itunes which updates everytime.

Daily I have icloud update 4 sent to my Windows 7 Laptop. It fails everytime I attempt to install the update. I was advised to install manually but this fails also.
I thought I'd uninstall icloud then reinstall again but cannot find a way to uninstall and still no solution to the update install.
I have itunes and have no problems with updates.
I also have an ipad with icloud so maybe this is part of the problem?

I have the same problem....I hope they get arouind to fixing this issue?????????????????

Im installing photoshop on my computer but the update is stuck at 81%

yes just like the heading states its been stuck on 81% since last night.

terminate the update.
check your version of ps.

HT1222 I have tried updateing 10.8.4 multiple times and restarting my computer but the update is still visible on the ap store.

I keep trying to update the M Lion 10.8.4 and restarting my Mac and the update is still there. I have tried multiple times including a complete shutdown. It seems it wont update.

Run the standalone updater instead of updating through the Mac App Store.
(84400)

HT1386 I have an issue. I connected my IPhone 4 to my windows 7 computer with the updated iTunes and updated iOS but for some reason, My "iPhone" tab doesn't come up. Why is that and how do you fix it?! I really want to sync the rest of my music. Please h

Help! I updated iTunes on my windows 7 laptop and I updated my iOS on my iphone4 and I used a USB to plug it into my computer but it doesn't have the "iPhone"" icon appear in the corner of the screen. Can anybody please help me fix this so that I can sync my music to my iPhone. I would really appreciate it! Please and thank you!!!

Device not detected in iTunes for Windows: support.apple.com/kb/ts1538

Whenever i clicked on firefox, there is a message on my computer screen" The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." what should i do now?

it happening again and again, and firefox is not opening.

Firefox doesn't shut down cleanly. It never has. It often only does a "top kill" which leaves the bottom running. It won't start again until you kill the entire process. Open Task Manager, hunt around for the remnant of the application ("firefox.exe"), and kill it using a bottom kill.
(Excuse my oil well terminology :-)

Knowledge Base article TS1245, cannot remove local KDC

*Section: To remove the local KDC from a system prior to creating a NetInstall image*
*Step 4;*
Using Terminal, execute this command to force creation of a new local KDC on first boot:
defaults delete "/Volumes/Source/System/Library/LaunchDaemons/com.apple.configureLocalKDC" Disabled
Returns
There is no (Disabled) default for the (/Volumes/{Volume name}/System/Library/LaunchDaemons/com.apple.configureLocalKDC) domain.
Defaults have not been changed.
Am I doing something wrong?

Unless 10.5.6 changed something, I've been successful with a two step prep and one step post install step. To prep, do this before imaging:
1: Open Keychain Access, select the System keychain, and delete the three entries titled com.apple.kerberos.kdc
2: Open Terminal and run
sudo rm -fr /var/db/krb5kdc
3: Shutdown the master system and create your image.
After imaging the machine and booting the first time, run this from Terminal before binding:
sudo /usr/libexec/configureLocalKDC
That is it and you are ready to go.
Hope this helps

Computer requires the update described in Microsoft Knowledge Base article KB2619234

Similar Messages

Maybe you are looking for