Computer restarted after Mac OSX ...

I've been surfing the net for a solution to this for two days, and so far nothing has worked. I'll abbreviate this 'nightmare' as best I can ...
I have a Mac G5 running 10.5x. Been running fine since I bought it some years back. Last week it just froze. Fans kicked on - the whole shabang. I was able to view the hard drive using my laptop and save my important files to an external hard drive. I attempted an Archive and Install, but the computer froze at 23% complete. I was able to get it started again after multiple attempts only to freeze again (and again, and again). I decided to forgo the Archive and Install and just wipe the slate clean with a fresh install. After the new install, the machine runs ... well kinda' whenever it pleases then it freezes. Initially I was getting the black kernel panic box. Now it just freezes up and I have to do a hard restart which gives me the dreaded "The computer was restarted after Mac OSX quit unexpectedly" when it reboots. Then it runs for a while, freezes, restart, run, freeze. You get the picture.
The forums that I've visited suggested many things, and here's what I've done so far:
Verified and repaired my disk
Repaired permissions
Ran a program called "Remember" because many of these issues seem to be related to RAM. (Remember reported all RAM to be okay)
Disabled screensavers
Disabled sleep
Disconnected all peripherals
Ran software update so all software is current
I had an Apple Genius look at it yesterday, and he told me everything's fine. He opened and closed apps, surfed the net, a total of five or ten minutes. The machine worked like a champ. It never froze. Of course I bring it home and just today it's frozen three times. No pattern that I have noticed, and I've been documenting all of my actions.
From what I've read, this is USUALLY a software issue. I have not installed any software since the reinstall. All that's on the machine is what was included on the install DVD. The RAM that I'm using is the original factory installed RAM (2-2 gig chips).
My IT friend told me to cut my losses because the machine is toast. I'm having trouble believing that.
Anyone out there have any suggestions?
Thanks in advance -

Do not use the leopard disk, use the gray disk (Disk 1) you got from the original box. It will erase the entire hard drive and install factory settings. After you install from the gray disk, let it run for a little until you install the leopard retail disk.

Similar Messages

"the computer was restarted after mac os x quit" followed by Kernel Panic

Running an Intel IMac 8,1. I think I'm running 10.5.5, but I'm not 100% sure.
Every time I start my computer pops up a display saying "the computer was restarted after mac os x quit" ignore/report.....and before I can click either, Kernel Panic happens.
I've tried hardware test and utilities/repair and neither works. Going to try to loop hardware test it over night.
I'm also at a loss as to how to get the log file and post it. I can connect it to a laptop, so if there is some way to do it that way, please let me know.
Thank you for any help.

I got into my computer by booting into safe mode, so here's a ton of information and I hope some of it is useful.
A apologize if the formatting is wrong, I'm going from Mac to PC. Also, turns out my computer is running 10.5.4.
*Console Message*
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** /dev/rdisk0s2
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Root file system
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] Incorrect block count for file pcscd.pub
1/19/09 11:07:29 PM com.apple.launchctl.System[2] (It should be 16 instead of 17)
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Repairing volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Rechecking volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] ** The volume Macintosh HD was repaired successfully.
1/19/09 11:07:29 PM com.apple.launchctl.System[2] *** FILE SYSTEM WAS MODIFIED ***
1/19/09 11:07:31 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
1/19/09 11:07:31 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
1/19/09 11:07:31 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
1/19/09 11:07:48 PM org.ntp.ntpd[31] Error : nodename nor servname provided, or not known
1/19/09 11:07:55 PM com.apple.SystemStarter[33] Starting Qmaster services
1/19/09 11:08:06 PM com.apple.loginwindow[38] Mon Jan 19 23:08:06 john-sklbas-imac.local loginwindow[38] <Warning>: CGSShutdownServerConnections: Detaching application from window server
1/19/09 11:08:06 PM com.apple.loginwindow[38] Mon Jan 19 23:08:06 john-sklbas-imac.local loginwindow[38] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
1/19/09 11:08:08 PM com.apple.ATSServer[83] FODBCheck: New annex file created
1/19/09 11:08:57 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[94]) Exited: Terminated
1/19/09 11:28:03 PM com.apple.loginwindow[38] Shutdown NOW!
1/19/09 11:28:03 PM com.apple.loginwindow[38] System shutdown time has arrived
1/19/09 11:28:03 PM com.apple.SystemStarter[33] Shutting down Qmaster processes
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** /dev/rdisk0s2
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Root file system
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] Incorrect block count for file pcscd.pub
1/19/09 11:35:54 PM com.apple.launchctl.System[2] (It should be 16 instead of 17)
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Repairing volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Rechecking volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Journaled HFS Plus volume.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extents Overflow file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking multi-linked files.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Catalog hierarchy.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking Extended Attributes file.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume bitmap.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** Checking volume information.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] ** The volume Macintosh HD was repaired successfully.
1/19/09 11:35:54 PM com.apple.launchctl.System[2] *** FILE SYSTEM WAS MODIFIED ***
1/19/09 11:35:56 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
1/19/09 11:35:56 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
1/19/09 11:35:56 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
1/19/09 11:36:13 PM org.ntp.ntpd[31] Error : nodename nor servname provided, or not known
1/19/09 11:36:19 PM com.apple.SystemStarter[33] Starting Qmaster services
1/19/09 11:36:33 PM com.apple.ATSServer[84] FODBCheck: New annex file created
1/19/09 11:37:04 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[94]) Exited: Terminated
1/19/09 11:37:29 PM SyncServer[154] SyncServer: Reaping records for inactive clients. Next reap on 2009-03-05 23:37:29 -0500
1/19/09 11:37:29 PM [0x0-0x13013].SoftwareUpdateCheck[156] SoftwareUpdateCheck: network unreachable
1/19/09 11:37:29 PM com.apple.launchd[116] ([0x0-0x13013].SoftwareUpdateCheck[156]) Exited with exit code: 3
1/19/09 11:37:56 PM Problem Reporter[161] ERR GetChild: 268435459
1/19/09 11:39:10 PM quicklookd[176] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Sequence 1-juvi center 2-MPEG-2 6.2Mbps 2-pass.m2v>'
1/19/09 11:39:20 PM quicklookd[178] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Sequence 1-juvi center 2-MPEG-2 6.2Mbps 2-pass.m2v>'
WDBMService2009-01-19-230900john-sklbas-imac
Process: WDBMService [81]
Path: /Library/StartupItems/WDBMService/WDBMService
Identifier: WDBMService
Version: ??? (???)
Code Type: PPC (Translated)
Parent Process: launchd [1]
Date/Time: 2009-01-19 23:09:00.983 -0500
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x801a308a 0 + 2149200010
1 translate 0xb80b6b00 0xb8000000 + 748288
2 translate 0xb80b7007 0xb8000000 + 749575
3 translate 0xb80d49c0 0xb8000000 + 870848
4 translate 0xb813ce79 spinlockwrapper + 1981
Thread 1:
0 translate 0xb8152c24 spinlockwrapper + 91496
1 translate 0xb81714a8 CallPPCFunctionAtAddressInt + 95812
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d4d41 0xb8000000 + 871745
5 translate 0xb813d014 spinlockwrapper + 2392
6 translate 0xb8153bba spinlockwrapper + 95486
7 ??? 0x800ed6f5 0 + 2148456181
8 ??? 0x800ed5b2 0 + 2148455858
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80b6c78 ecx: 0xb7fff9ac edx: 0x801a308a
edi: 0xb8208980 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000246 eip: 0x801a308a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x802947bd
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT
& Finally the Problem report & System config
*Problem Report*
Mon Jan 19 23:36:12 2009
panic(cpu 0 caller 0x001694C6): "vmmapunwire: entry is unwired"@/SourceCache/xnu/xnu-1228.5.20/osfmk/vm/vm_map.c:4110
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x342efdf8 : 0x12b0fa (0x4592a4 0x342efe2c 0x133243 0x0)
0x342efe48 : 0x1694c6 (0x45c20c 0x358f8000 0x0 0x342eff0c)
0x342eff28 : 0x2e4b9328 (0x35908000 0x0 0x0 0x0)
0x342effc8 : 0x19ebdc (0x0 0x0 0x1a20b5 0x3cc1c80)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.BootCache(30)@0x2e4b7000->0x2e4bbfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: iMac8,1 (Mac-F226BEC8)
*SYSTEM CONFIG*
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.66 GHz, 2 GB
Graphics: kHW_ATIr600M76plusItem, ATI Radeon HD 2600 Pro, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (4.170.46.9)
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 0 incoming serial ports
Serial ATA Device: WDC WD3200AAJS-40VWA1, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Keyboard Hub, Apple, Inc., high_speed, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, low_speed, 100 mA
USB Device: USB Reader, high_speed, 100 mA
USB Device: Apple Keyboard, Apple, Inc, low_speed, 100 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
USB Device: BCM2045B2, Broadcom, full_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA

The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my email. I can't seem to purchase this on-line

The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my emails. I can't seem to purchase this on-line as it keeps telling me to go to the app store. I haven't got the app store on my computer as I am told I need iCloud for which I need the new operating system, which I can't download or purchase as I am sent back to an instruction telling mee to go to the app store icon.
How difficult can it be to simply purchase the software on-line have it shipped to you so you can install it, in the event it cannot be downloaded as it appears it can't be based on my curent operating systems being Mac OSX 10.5.8.

Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
Requirements for Mountain Lion:
http://www.apple.com/osx/specs/

Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

Hello,
my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
Specs for Mac Pro Mid 2010:
- 2 x 2.66 GHz 6-Core Intel Xeon
- 14 GB 1333 MHz DDR3 ECC
- ATI Radeon HD 5770 1024 MB
- OS X 10.9.2

Hello Linc,
I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing" more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
STEP 1 - BOOT_TIME:
8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded ***
8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
STEP 2 - SYSTEM DIAGNOSTIC REPORT:
Tue Aug 12 19:30:48 2014
panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c98d38a0 : 0xffffff801f822f79
0xffffff81c98d3920 : 0xffffff801f8dc24e
0xffffff81c98d3af0 : 0xffffff801f8f3746
0xffffff81c98d3b10 : 0xffffff801fc51e48
0xffffff81c98d3c40 : 0xffffff801fc8bffe
0xffffff81c98d3c80 : 0xffffff801fc8c1fd
0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
0xffffff81c98d3d10 : 0xffffff7fa0144068
0xffffff81c98d3d70 : 0xffffff7fa0142c85
0xffffff81c98d3da0 : 0xffffff7fa0141646
0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
0xffffff81c98d3e20 : 0xffffff7fa0140b8b
0xffffff81c98d3e50 : 0xffffff801fc956ef
0xffffff81c98d3ea0 : 0xffffff801fc952af
0xffffff81c98d3f30 : 0xffffff801fc90e89
0xffffff81c98d3f70 : 0xffffff801fc95e03
0xffffff81c98d3fb0 : 0xffffff801f8d7417
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
         com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
            dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x000000001f600000
Kernel text base: 0xffffff801f800000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26153387208
last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
loaded kexts:
com.Cycling74.driver.Soundflower    1.5.1
com.motu.driver.PCIAudio    1.6 58373
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.kext.AMDFramebuffer    1.2.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
com.apple.AMDRadeonX3000    1.2.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleLPC    1.7.0
com.apple.kext.AMD5000Controller    1.2.4
com.apple.driver.AppleIntelMCEReporter    104
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.iokit.SCSITaskUserClient    3.6.6
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.Intel82574L    2.6.2b1
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBUHCI    656.4.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.nke.applicationfirewall    153
com.apple.security.quarantine    3
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOBluetoothFamily    4.2.6f1
com.apple.iokit.IOAcceleratorFamily    98.22
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.kext.AMDSupport    1.2.4
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleUSBHIDKeyboard    170.15
com.apple.driver.AppleHIDKeyboard    170.15
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
com.apple.iokit.IOUSBMassStorageClass    3.6.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.iokit.IOUSBFamily    683.4.0
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.AppleKeyStore    2
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.iokit.IOReportFamily    23
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.pthread    1

Adobe updater won't quit and I cannot restart my mac osx machine

Running mac osx with Adobe Reader set to auto update, I came home to find that an update had stalled and now I cannot quit the installer, cannot update any other software (only tried Office 11 update) or restart my computer... please help!

canipleasehaveascreenname wrote:
Running mac osx with Adobe Reader set to auto update, I came home to find that an update had stalled and now I cannot quit the installer, cannot update any other software (only tried Office 11 update) or restart my computer... please help!
You need to press and hold the power button for five seconds and do a "hard" shutdown. Then restart.
Download the "offline installer" here: http://get.adobe.com/reader/enterprise/ and run it to update.

Mac Book wont reboot after Mac OSX update

Was doing a regular update and a MAC OSX update was included among many others. After doing it, my macbook will not rebot and just remains in the loading stage. Any suggestion on how to get it working again..._*Need Help Desperately*_ - my son has some papers on it that is neede within next week.

cheechy! wrote:
Hi Everyone,
It is a macbook not ibook, sorry my mistake.
I did not know it would be breaking or violating anything, if so I apologise!!
I will obviously need to buy the software specifically for my macbook is the answer, thank you for all your answers.
If i buy the software do I still have to ask for macbook or is the retail version for any mac machine?
Sorry - I wasn't trying to be harsh. The software on the restore discs is licensed (or should I say licenced) for use on one computer. I think a lot of people might dispose of or sell them after their machines expire or they upgrade to a newer version of OSX.
This gets really complicated.
There are currently 6 different iterations (all the machines at the same issue date should use the same install version) of the polycarbonate shell MacBook. Each one would require a different set of install discs. Several of these came out before Leopard (10.5) was on the market and the install discs have Tiger (10.4.X). If your machine was of a vintage before Leopard was on the market, you can install using any retail version of Leopard. I have a copy of Leopard with the original 10.5.0 version. The current retail version of Leopard is 10.5.6. This should install on any MacBook which came standard with any version before 10.5.6.
Are you confused enough now?
If you could identify which iternation of MacBook you have, I think people here could give you a better idea of what your options are for installation of the operating system. You could put your old drive back in, run System Profiler and find out which MacBook version you have. Mine says MacBook 3,1. My guess is that any retail version of Leopard should work since you identified your OS as 10.4.11.

Bridge will not open after Mac OSX update

Hi, I updated to Mac OSX 10.9.5 yesterday, and now Bridge CC will not open. What should I do?

I'm not familiar with Lr, not having used it since trying it and thoroughly hating it when I tried when it first came out, but… I'm not quite clear what you mean by "open in Bridge".
Bridge doesn't "open" anything, so I suspect you mean open in Adobe Camera Raw hosted by Bridge. Bridge is just a file browser, and as such it doesn't open, edit, manipulate or save anything; it just hands the file(s) to the appropriate application, whether that be Photoshop, Adobe Camera Raw (ACR), Adobe Illustrator, InDesign or even something like MS Word.
Perhaps you need to re-establish the file association at the OS X level. What happens when you bypass Lr altogether and just double-click on a raw file in the Finder?

Computer restarts after every 20 secs

Product name: HP compaq dx 2390 microtower
OS: Windows XP
Error:Computer restarts in infinite loop

Hi:
Check the motherboard for swollen or leaking capacitors.
Pull all the memory modules and test each one in the primary memory slot one at a time and see if any of them are causing the boot loop.
Paul

Computer restarts after syncing 80gb ipod classic

Every time I sync my ipod classic,(80gb)the computer restarts itself. How do I stop this? I'm using windows XP home edition. Any advise will be greatly appreciated

Are you getting any sort of blue screen when the PC reboots? If so, what numerical and text codes are you getting with it? (ie 0x\[zeros/letters/numbers] CAPSANDUNDERSCORES)
If the blue screen mentions a specific file (for example, “ati3duag.dll”), let us know what that is called too. (Exact spelling, please.)
Here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
If you're not seeing a blue screen (or if you’re just seeing a flash of a blue screen before the PC reboots), we can use the following technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
With those settings in place, does a blue screen appear before the PC reboots?

My Mac Pro keep restarting after install OSX Mountain Lion!

I had start up errors, took forever to start they keep restarting again and again.
How can I fix this problems?
Thx!!

smc reset
fixes (should fix) random shut downs and sleep
http://support.apple.com/kb/HT3964
it is not that, then an app may be crashing causing the OS to crash and then you may have a setting that restarts your computer should it crash.
You might also want to attempt a reinstall from the recovery partition
To get to the recovery partition restart your computer, hold CMD+R down when you hear the boot up chime. Open Disk Utility first (verify your boot disk and repair if needed) and then close it and reinstall ML.

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How di I prevent an automatic computer restart after exe install?

How do I stop the msi installer from restarting the computer after installing an exe? I have built an installer package of an application using LabView Project. When running the SetUp.exe the msi installer is automatically restarting the computer after the completion of the installation. I have the following in the setup.ini file.
[MsiEngine]
WinNTPath=supportfiles\WindowsInstaller-KB893803-v2-x86.exe
RequiredVersion=3.0.0.0
CommandLine=/passive /norestart
I am using LabView version 8.5.
Any help would be appreciated.
BethV

Hi, BethV,
Run setup.exe with /? option:
setup.exe /?
Then you will see following dialog:
It seems to be option /r:n - is what you needed
best regards,
Andrey.
Message Edited by Andrey Dmitriev on 10-31-2008 06:19 PM
Attachments:
ScreenshotInstaller.png ‏20 KB

What do I update to after Mac OSX 10.5?

My mac book is still running on the OSX 10.5.8, but I've been having problems with safari shutting down when I watch t.v or movies. What should I update to next?

Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store, so you have to call Apple to buy it, last I heard, but quick, call before it's gone!
Call Apple 1-800-MY-APPLE
You have to get 10.6.8 first to go even higher to 10.7 or 10.8

Dreamweaver CS6 crashes after Mac OSX 10.9.3 update.

Updated today to Dreamweaver CC, and the issue persists. My 'local' files are stored on a Windows Vista server on the LAN.
Everything worked OK until 2 days ago, so I'm almost sure the issue is related to the OS update.
I can open a file, work on it for a while, and after a few minutes, Dreamweaver 'hangs' and can take up to 10 minutes to be responsive again.

You will probably get better help in Dreamweaver support forum
EXCEPT... there are LOTS of messages concerning 10.9.3 so read below
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Dreamweaver CS6 / CC crashes after Mac OSX 10.9.3 update.

Updated today to Dreamweaver CC, and the issue persists. My 'local' files are stored on a Windows Vista server on the LAN.
Everything worked OK until 2 days ago, so I'm almost sure the issue is related to the OS update.
I can open a file, work on it for a while, and after a few minutes, Dreamweaver 'hangs' and can take up to 10 minutes to be responsive again.

Hi Rudolfo,
Welcome to Adobe forums. See Prompted to install Java SE 6 Runtime | Mac OS 10.9 and Unresponsive on Mac OS 10.9. If you sill have problems, reach out to me over a private message providing your Adobe ID, location, and contact details (email ID, phone number).
Thanks,
Preran

Computer restarted after Mac OSX ...

Similar Messages

Maybe you are looking for