Computer says almost out of disc start up space the. Screen goes white after signing in. How do I clear space so I can sign in?

I get a message that says low disc space for start up when I go to sign in. After I do sign in the screen goes white. Is there any way to delete items so I can sign in and clear more disc space. I don't want to lose everything and apple is not covering a tech call.

Start up in Safe Mode http://support.apple.com/kb/HT1564

Similar Messages

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: Button SCI . Also "Waiting for remote debugger connection." What is my next step?

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?

Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS.

Firefox freezes, if clicked the screen goes white and says firefox is not responding. How do I fix this?

At seemingly random times, firefox freezes, and if clicked the screen goes white and says not responding. At times it makes watching any video impossible. I have tried everything I've seen in help forums. I've removed and reinstalled firefox, adobe, silverlight, realplayer, and anything else forums have suggested. So far the only effective solution I've read about this problem is to switch to google chrome. I'd rather not do this.

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode you want. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

My start Volume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. what can i do to come to the Desktop?

My Startvolume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. What can i do to come to the Desktop?

What do you mean by you "cleaned" it?
Try booting into Safe Mode: http://support.apple.com/kb/HT1564
If you can boot into Safe Mode, try clearing off some space while booted there.

I try to get log on to the itunes store, says accessing store that the screen goes white and only the apple symbols is in the top box...nothing else...WHY

okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??

Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

The normal suggestions.
Close the app,off fully. Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
Then reboot the pad and try the spp again. If same issue, delete the app, then reload it. ( no charge). You may just have a bad copy. If continues, write to the developer, they may need to do an update. I have an older version of the same app and it works fine.
Since yours is the ad supported version, they are maing real sure you see the ad. Is it as simple as you need to click thru the ad to get to the game?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

HT201177 When I turn my computer on, I can hear it starting up but the screen stays black. Anyone know how to fix this?

When I start up my compute, I can hear it starting up but the screen stays black. Has anyone else had this problem and found a fix?

If you press the caps lock key does it light up? If it does then this indicates that your system is booting but the display is either not recognized, is not displaying any video, or the display is displaying video but the backlight system is not lighting up. As long as you've tried turning up the brightness then there is not much you can do other than take it in for a diagnosis. If you have a very bright flashlight you can turn on the iMac and then shine the flashlight onto various areas of the iMac display to see if you can see any faint images on the display. If you do then this indicates that the display is displaying the image, but the backlight is not turning on for some reason. It doesn't change the outcome, but at least you can assist the technician who is troubleshooting your iMac.
Please let us know what you find out.

My Mac book pro has the end of a earphone stuck to it. After this I updated to maverick, and this massively slowed down my computer.Now my laptop is switching on and logging in just fine, but after logging in the screen goes white. What can the reason be?

At first my laptop was fine after the earphone end got stuck in. Soon it started getting slower, and suddenly it stopped switching on. The people in the service station said that it wAs because the hard disk drive was corrupted. I came back home, and immediately it stopped working again. This time they said it was because of water spill. They changed the entire key board and then it started working for a while. Later I updated to maverick and that slowed down my computer. Once, I switched on my laptop, logged in, and then the screen went white. When we took it to the service center they said they will need to replace the hard disk. I am not sure what I should do. Any suggestions?

Liquid damage from water spill is progressive, unfortunately.
Best.

Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

Hi,
I have a Satellite Pro C650.
It boot fine.
I can see Windows starting up - after startup - the screen goes completely white.
Has anyone seen this?
Am geussing it might be a loose display connection - but I the screen displays the startup sequence and initial windows startup.
Regards,
eeiddne

Hi
I dont think your display is faulty.
What happens if you access the BIOS at the beginning?
To access the BIOS press F2 while powering on the unit.
Access the BIOS and keep it running for some minutes and check if the display will turn to white.
Additionally its advisable to connect an external monitor and to output the display to the 2nd screen. If the 2nd screen would not be OK, then the graphic chip might be the troublemaker.

I'm trying to install a new samsung 27" series 7 750 monitor. I have a macmini. when i plug the cord in between the computer and the mknitor, the screen goes white, but no display. When not plugged into the computer the screen stays black and cycles

I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?

Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Computer says almost out of disc start up space the. Screen goes white after signing in. How do I clear space so I can sign in?

Similar Messages

Maybe you are looking for