Computer Screen tremble and shakes

I have powerpc 533 running 10.3.9
Here is what i have done...
bought new 19inch ( VIEWSONIC 19" G90F)
replace video card (ATI RADEON 7000 64MB AGP)
Change the cables..
change the location three time ( now set-up in dinning room, nothing in this room no speaker)
lower the refresh rate from 75 to 70
turn off cell phone....
I don't have money for new machine I can't think of anything else>
Power mac G4 Mac OS X (10.3.9)
Power mac G4 Mac OS X (10.3.9)

Lowering the refresh rate will not help, the 75hz is best for most monitors. The shaking you discrible is a result of the card getting hot, and its not a problem with your machine. I had this problem with my Radeon 8500, its fan was failing) so I just got a cheap $5 PCI slot cooling fan, put it below the video card and the problem was no more. Also there was no Mac Radeon 7000 with 64MB VRAM so you have a PC card with flashed ROMs which wont help matters any.

Similar Messages

Can My Apple TV be used to show my computer screen? and how do I do that?

Can My Apple TV be used to show my computer screen? and how do I do that?

Welcome to the Apple Support Communities
If you have a Mac, you can use AirPlay Mirroring on OS X Mountain Lion to stream your computer's display onto the Apple TV > http://support.apple.com/kb/HT5404
If your Mac isn't compatible or you have a PC, use AirParrot to stream your display to the Apple TV > http://www.airparrot.com

Periodically the computer screen darkens and requests shutdown

Periodically the computer screen darkens and requests shutdown
this problem inturrupts almost everything and it started happening ever since i installed snow leopard
i want to format the computer and reinstall regular leopard because of this problem
Basically what happens is:
•The System freezes and the screen darkens a few shades.
•A message appears requesting that i hold the power button to shut off and restart.
•When i restart a message appears that says, "You shut your computer down because of a problem"
and it requests i report it
so i reported it its happened at least once a day everyday since i installed leopard on the 28th

This is, what they call a "Kernel Panic" - a unrecoverable error encountered by the Operating System during operation.
I assume, that you did a Upgrade Installation from Leopard or Tiger. There is probably some incompatible KernelExtension or Application remaining, which causes the problem.
Can you open Console.app in Applications > Utilities. Inside Console, you go to Diagnostic Information > System Diagnostic Reports. Here's a list of all recent Application / Kernel Crashes. You are interested in the following files: "kernel_<date and time of the Crash>". Click on a few of these. You will find some Information about the crash inside. If you're lucky, there's something like this inside: "BSD process name corresponding to current thread: <APPLICATION NAME>". This can help identify the faulty App.
Also you might want to try starting in Safe Mode. If the Problem does not appear there, it's most certainly some Issue with old Software.
Message was edited by: FlipChris

Iphone 4s no statusbar, screen shifted and shakes

Hi, I have a strange problem on my new iPhone 4s.
I don't see the statusbar indicating my network and battery status. Furthermore, the screen is trembling a bit.
I have the feeling that the screen is shifted to the top, when a notification appears I can see only the half of it..

Sounds like it's time for a trip to the Genius Bar for phone replacement.

What are best output options in DVDSP for playback on VGA Computer Screen?

I understand that DVDs were designed to be viewed on TV sets - not computer monitors with much higher resolution than a TV set.
However .... I'm curious what the best output options are within DVDSP3 for playback on a standard 19" VGA computer screen 1024x768 and not necessarily on a TV screen. Any ideas?
Will DVDSP3 address playback on a standard VGA computer screen any better than iDVD6? .... or are they both very much the same?
Here's my objective:
MiniDV>FCP HD >DVD SP3>DVD-R / Playback on VGA 19" Monitor only (no TV involved).
or...
MiniDV>iMovie6>iDVD6>DVD-R / Playback on VGA 19" Monitor only.
TIA
SDMacuser

George - I'm not a web designer, so I'm probably not the best person to respond but here goes anyway (FWIW):
(anywhere from 10sec to 2min) for website visitors to play (but not download). There can be multiple audios per web page.
No problem. QuickTime. X-platform and you can set whether it's downloadable or not - but that's really moot, as anything on the web can be captured, especially with the 'analog loophole' such as WireTap or Audio Hi Jack.
I need a combination of buttons from very simple round (or square 20x20 pix) to a bar style with volume control, both with the option to change the color to fit my site.
Buttons are your business - nothing to do with playback functionality. They are usually just a link to a file - your site should be set up to play anything, by anything, that's clicked on… Flash, QT whatever
a player that runs from my site and not somebody else's.
So you're hosting? I'd hate to go down that path… what if your site takes off? What if it goes down?You'd never handle the bandwidth. IMO better to buy inexpensive (but competent) hosting for $10 or so per month and avoid the headaches, and expand the hosting service as and when required.
See here for example:
http://soundpropaganda.com/blog/loudness.html
I have QT files, not downloadable (well, supposedly) from text links (check the green "Here's" links). The link method (graphic, text, whatever) is your design, not part of the playback system.

Safari causes my computer to crash and I have to restart

I have just started having problems with Safari about a week ago when I did the software update. About a minute after I'm in Safari, my computer screen freezes and a huge grey bar comes over saying to restart my computer. Just wondering if anyone knows why it would do this. All other browers work just fine, but I like Safari the best. Thanks.

This is an iphone forum, you may want to repost this here..
http://discussions.apple.com/category.jspa?categoryID=169
It's the Safari forum..

Computer Screen going blank and computer not responding

I have had a problem when in the middle of doing something my computer screen goes blue and all you can do is power it down. Any suggestions??

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?

An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7)

I just downloaded Mountain lion and I kind a wanted to listen to music on my computer screen then to my headphones and I also want to use the dictation Mic output so was wondering if it's at all possible to do those both of the same time, also using the s

I just have just downloaded Mountain lion and I wanted to listen to music on my computer screen with my HDMI cable plug into my back of my screen and I wanted to talk to dictation on my regular standard iPhone headphone and I was wondering if it's all possible change your settings Mac Mini to set it so you can listen to those both like your headphones and use the mic in your headphones and there's no settings that would change in the Mac Mini so do there is a flaw in this system or I am just really really really really dumb.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

How can I get my iTouch to show on my computer screen? What cable is needed and where I can get it. (Apple to female VGA)

Trying to get my iTouch to show on my computer screen NOT A TV.
Please help I think I need a female VGA to a apple connector anyone know?

Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

My 3rd generation ipod touch will not connect to itunes. i plug it up to the computer by USB and it makes a jingle and my computer recognizes it in the my computer screen, but it will not connect to itunes. what should i do?

my 3rd generation will not connect to itunes when i plug it up to the computer by USB. i have tried to do it with itunes open and closed. it wont recognize it but it is recognizes in the my computer screen. it even makes a jingle when plugged up. on my ipod i can download music wirelessly from my itunes. other than this issue my ipod works just fine. what should i do?

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do?

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

I have a macbook pro 13" 2011, When my computer boots I get code on my boot up screen and then my computer shuts off and then restarts. Its an endless loop, as my computer tries to boot up.

I have a Macbook Pro 13", that was purchased in 2010-2011. So randomly yesterday, when I boot up my computer I got to the boot screen, then code popped up on my screen. ** I have attached an image of the code below.** But after the code pops up, my computer shuts down, and tries to boot up again. This is an endless loop and doesn't get passed the boot screen. The code shows up everytime.
I personally believe this might be a software issue and not a hardware. Please feel free to shoot out any ideas or a translation of what the code is referring to.
THINGS I HAVE ALREADY DONE:
- Reset the PRAM by holding CMD+Option+P+R
- Gone into Safemode and tired to verify the Harddrive.
- Please don't comment saying, "take out the battery." , "hold the power button for.." , None of that sh#* works.
Below is three different links for the same image. (just in case, **** breaks).
[IMG]http://i57.tinypic.com/2z82stl.jpg[/IMG]
<a href="http://tinypic.com?ref=2z82stl" target="_blank"><img src="http://i57.tinypic.com/2z82stl.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
http://tinypic.com/view.php?pic=2z82stl&s=8#.U0LJidy4nFI

What happens if you boot holding the command S keys down?
If it stays running in single user mode
try the command
fsck -fy
You could try holding the option key on bootup, to see if presents you with a startup disk however
It looks as if you need to reistall the OS.

Computer Screen tremble and shakes

Similar Messages

Maybe you are looking for