Computer shut down for a week, I am not receiving iMessages I missed from that whole week..

My computer was shut down for a week, during which time my friends sent me a bunch of messages on iMessage. Now that my computer is on I am not receiving any of these missed messages. I think I missed some important messages from people so I really want to know what happened and why I am not receiving them. I checked my email to see if the messages got sent there but there is nothing. Can anyone help?

Instant messaging is not the same as email. If your IM client is not running when the message arrives, it's lost. Ask your friends to send their messages again, or to email them.

Similar Messages

  • HT1455 computer shuts down for no reason

    computer has started shutting down for no apparent reason. Kid can be playing minecraft or on youtube or i can be browsing internet. bought in june of 2012. thought these were supposed to be bulletproof?

    computer has started shutting down for no apparent reason. Kid can be playing minecraft or on youtube or i can be browsing internet. bought in june of 2012. thought these were supposed to be bulletproof?

  • Computer shut down for no reason?

    i was playing a call of duty, match online, clan match actually, and my comp just shuts down? im only going 12.5x166, i tried unreal 2k3 samething happens, could this be my vid card acting up?

    never mind, turns out my old oced drivers were showing it at way above what i normally run, but couldnt see the speeds in new drivers, its all good now i think
    EDIT: TURNS OUT MY CPU FAN WASNT RUNNING

  • My computer shuts down but the restart feature will not work. It just hangs.

    Hello
    I have a MS6547 version 1 (645 Ultra Motherboard)
    The problem I am having is that my computer will not restart. If I press the power off button in windows it will shut down but the restart windows function will not work it just hangs at (Windows is shutting down)
    I zero'd my hard drive and installed a fresh copy of windows but the restart feature still doesn't work. Even when I was in the middle of installing windows when the computer says it will reboot in 15 second that hangs on restarting computer as well/
    Hope someone can help
    My spec is
    645 Ultra Motherboard
    2.2gb Pentium CPU
    256ddr2100 RAM
    ATI Radion Graphics Card
    60gb Hard Drive
    LG CDRW
    Please Help.

    Hello and welcome!
    It sounds like it has a hard ware reason. I suggest you take the motherboard out, to see that there are no stand-offs/spacers/distanser left unused creating a short.
    Also, remember to have as little hardware as possible when you install Windows. No extra PCI-cards, USB-devices and such.
    If the system has worked well earlier, above still rules, but here are some many other reasons for the described symtoms:
    http://www.aumha.org/win5/a/shtdwnxp.php

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Computer shuts down during render/prerender

    This was not my original problem but it has occured before and I know it will occur again.
    My computer shuts down for no reason when I try to render or prerender video in Adobe Premiere Pro CS4. From what I can tell it is a general issue with premiere that I am having. I have tried multiple video formats, multiple video lengths, and multiple rendering options and I am still getting random shut downs during rendering.
    Here are some specs for my computer which is a laptop:
    OS: Windows 7 Ultimate (64 bit OS)
    Proccessor: Intel Core 2 Duo @ 3.0 ghz
    Ram: 8 gigs of it
    Video: Nvidia Geforce 9600M GT
    1 Hard Drive w/ 280 gb of space
    As a recap.... My exact problem is that during the rendering or pre rendering proccess my computer simply shuts down as in it turns off.
    I can also add that the computer does act strangely leading me to believe that theres some hardware or software incompatibility. While it is rendering I can hear the CPU fan pick up which is usually normal for any rendering application but what I noticed was that it doesnt stop speeding up. Its like if it was going into an overload and I can confirm that at its peak, the computer shuts down.
    To add troubles... whenever I pre render any video and it succesfully renders.... Premeire will hang up really really bad if I try to play the pre rendered preview. In otherwords when you preview a video that it pre rendered it usually plays smooth and everything is fine. After I pre render something though and play it I can tell its locking up because the timeline bar is really jumpy and the video playback skips also.
    This is the problem I would really love fixed. I usually have to button smash my keyboard until I lock premiere up and then once it unfreezes itself i can preview my work smoothly. This is however like a good 5 mins of my time trying to get the preview to play smoothly though so its really hurting how fast I can work.
    If anyone can help me out I would greatly appreciate it. I will be trying to run the same stuff on my older laptop and observe the results. I personally think CS4 is incompatible with windows 7.

    Video: Nvidia Geforce 9600M GT
    If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
    PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
    Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
    Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
    It appears that you have a laptop. Is that correct?
    Good luck,
    Hunt

  • 3G phone discharges when computer shuts down?

    I have a 3G iPhone that is synched with my desktop G5 system. I use the supplied cable that's plugged into the front panel of the G5. When the G5 shuts down for the night the iPhone, which had been charged completely at that time, is about 2/3rds charged in the morning. This doesn't seem right to me. Is this the way it's supposed to work?
    Thanks

    Hi,
    This sounds normal, if you power off the G5 It should not charge USB devices.
    +"If iPhone is connected to a computer that’s turned off or is in sleep or standby mode, the iPhone battery may drain."+ http://support.apple.com/kb/HT1650
    -Jason

  • Computer shuts down spontaneously

    Computer shuts down. Does not crash in use. Has only happened while in sleep mode overnight. On two occasions sleep light blinking, but computer shut down when mouse moved. Will not turn on again, unless power strip turned off then back on. Other items connected to power strip not affected. No other signs of power surge or voltage drop in house. Have not made any changes in power saving. Appears to be something in the computer. No abnormal fan noise or any other indication that it is overheating. Has not happened while in use. Suggestions?

    May I add one more voice to the chorus?
    My 1st Generation PPC G5, OS 10.5.6. 2GB Apple-installed RAM,on which the logic board was replaced under warranty (bad capacitors) several years ago, has begun shutting down spontaneously and the only way to restart it is to unplug it, wait about 20", plug it back in and then it will restart.
    Assuming lighting hasn't struck twice and that it's not the logic board, I wonder if it is the power supply. I know very little about interpreting logs, but here is the take from my Systems Log just before it shut itself down at 18:59:05 this evening:
    Feb 24 18:31:56 g5imac Preview[179]: -[<IKKnobLayer: 0x7ff1010> display]: Ignoring bogus layer size (2.395020, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (1.596558, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (3.193237, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (6.386597, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (9.579956, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (14.369995, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (22.353271, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (39.118286, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (51.093262, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (63.068237, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (72.648315, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (81.429932, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (86.219971, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (90.211670, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (97.396606, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (106.178223, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (130.128296, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (137.313232, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (149.288330, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (155.674927, 0.798340)
    Feb 24 18:32:21 g5imac Preview[179]: -[<IKKnobLayer: 0x8f17d40> display]: Ignoring bogus layer size (157.271606, 0.798340)
    Feb 24 18:32:48 g5imac Preview[179]: -[<IKKnobLayer: 0x8f1eaf0> display]: Ignoring bogus layer size (0.798340, 14.369995)
    Feb 24 18:33:18: --- last message repeated 2 times ---
    Feb 24 18:59:05 g5imac kernel[0]: IOPMSlotsMacRISC4::determineSleepSupport has canSleep true
    Do these entries perhaps suggest anything to anyone?
    If it is the power supply, how much would it be to have it replaced by Apple at the local Apple Store? Anyone have a ballpark figure?
    Many thanks,
    Bob

  • I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

    I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Every time i turn on my macbook pro, it gives me the message: "Your computer was shut down last time because of a problem" even though it only happened once last week

    My computer crashed lasts week. And now, every time I turn on my computer, at the login screen it says that my computer shut down last time because of a problem, and gives me the option to restore my windows, i've tried both options, it still comes back.
    My computer is a macbook pro mid 2010 running OS X 10.9.1
    comment if you need any more information
    Thanks for the help!
    -Ethan

    First boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and then reboot again normally.  The safe mode boot will take longer as it runs repair procedures during the boot.
    If that fixes the problem I'd also update the system to the latest 10.9.4 via the  OS X Mavericks 10.9.4 Update

  • My computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

    my computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • On shut down I get a window that says Continue the installation Choose abort if you wish to cancel the installation If I don't press anything or if I press Yes or Abort the message goes away and the computer shuts down.  This has been going on for ov

    I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1.  For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation  ABORT   YES".   If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down.  But the next time I use the computer and then shut down the message is back.  I have looked to see if there are any downloads pending or if there are any updates trying to download.  I am very puzzled.

    Genieo Adware is installed.  Removing it will help.
    If you have another browser installed, use it.
    If not, launch App store and get another  browser for temporary use.
    Remove it afterwards.
    1. Use  free  AdwareMedic by clicking “Download ” from here
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.

  • I just downloaded Lion and now my computer just shuts down for no reason. What is its problem?

    I just downloaded Lion and now my computer just shuts down for no reason. What is its problem?

    I recently made the same mistake.  The thing to do is download the new Quicken Essentials for MAC.  After you install the new version follow the instructions on how to transfer your old files.  There is a way, it just takes a little time and, if I remember correctly, it takes the info from your quicken backup files. Hopefully you had auto back up on and your files are intact.  I didn't and reconstruction was a bear but entirely possible.  The new Quicken is quite different but seems to work quite well.  Good luck.

  • Certificate for the website, was going to copy and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down. Why what happened i am not sure about going to the website now....

    Question
    Went to Crossings Book Club website while there something popped up about the certificate for the website, i was going to copy it and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down.

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • HT4623 when i start the update ios6 for iphone 4 that time my computer shut down and from then my i phone just showing connecting to itune but when i connect to itune my phone not shown plz help

    when i started updating my iphone by itune that time my computer shut down and update collapse from that time my screen shows only itune logo and a cable to connect this. already i did but now my phone is not showing in itune

    You must have the credentials that were used to turn on Find my iPhone on the device. Without them, you can not get past the activation lock.

Maybe you are looking for

  • SUN Java System Web Server 7.0U1 How to install certificate chain

    I am trying to install a certificate chain using the SUN Java Web Server 7.0U1 HTTPS User interface. What I have tried so far: 1. Created a single file using vi editor containing the four certificates in the chain by cutting an pasting each certifica

  • ABAP and JAVA stack together?

    Hello Friends, I wanted to install the ABAP stack SP12 with JAVA stack SP09. I am downloading the last file of the stacks. Is it possible to install them together on one OS(I have W2K Enterprise Edition)? Can you guys please help me out here ? Best R

  • Problem with In-Store trade-in

    Hi, recently I tried to trade in the video game Batman: Arkham Knight at my local store (Store 560). The associate at customer service informed me that it was only available to trade-in online and not in-store. Is this true? Are there actually items

  • How to gather stats on the target table

    Hi I am using OWB 10gR2. I have created a mapping with a single target table. I have checked the mapping configuration 'Analyze Table Statements'. I have set target table property 'Statistics Collection' to 'MONITORING'. My requirement is to gather s

  • Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

    Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)? �Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and the