Computer shut down uninstalling old Thunderbird,while re-installing, it keeps on saying it must remove old Thunderbird and reboot, nothing happens - HELP

Tried removing older version, computer turned off while doing so. Program no longer appears but when attempting to install new version, I keep getting the message taht teh old version must be removed by re-booting,. I re-boot but still blocked from a re install

''re : Tried removing older version, computer turned off while doing so''
How can you uninstall something with the computer switched off?
Have you done this?
In Windows to uninstall a program:
* Control Panel > Programs & Features.
* Select Mozilla Thunderbird
* click on uninstall

Similar Messages

How do i shut down an old network and create a new one

I have a network that requires a password. I changed the password, but people who were previously signed in can still access the network. How can I shut down the network and start a new one with a new password?

Change both the name of the wireless network and the password
Make sure that you are using WPA2 Security
If you give the password to anyone, you should assume that they will give it to someone else.

Computer shuts down while updating Ipod?

Hi
I have a Video Ipod and an old laptop, my problem is that my computer shuts down 2 minutes after I open Itunes.
My question is, whether the Ipod saves the little data that is transfered, when the transfer is abrubted by the computer shutting down?
(If it saves it I can keep on updating tiny bits of my music libary, otherwise I will stop wasting my time restarting the upload proces over and over again)
Thanks

You might consider reposting this question in one of the iPod discussion forums here - which are for both Windows and Mac user problems.

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

You cannot merge Apple ID accounts, that has never been supported.
You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

Computer shuts down while importing

This doesn’t happen with every song I try to import in iTunes, but let’s say with 2 out of 10 songs, while importing my computer simply shuts down. Just before it dies on me it says something like: Error, disk locked. I just can’t figure out what’s his problem.
Hp Pavilion dv1000 Windows XP

Problem solved for me... I changed the place of my computer which seem to have helped. I think the problem was heat... too much heat and now I can import a full CD without my computer to shut down. If it is not heat, I read that it could be bad memory. if my computer shuts down again, I will check the memory of my computer.

Computer shuts down while loading the progress-bar

SPECS:
MacBookPro 13-inch
Early-2011
I recently installed Yosemite in my computer, hours later while I was using the new OS X my computer freezed. I held the power button and it turned off. Now, I'm trying to power on the computer and when the progress bar is in 50% the computer turns off.
I need help ASAP

rthec wrote:
I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.
The operating system, XP in this particular case, will shutdown the system to prevent damage to hardware if it encounters an instruction which can damage the system. It will usually logs an event which you can view by clicking Start, then in the Run field, type eventvwr.msc and click OK. Then open the both the "System" and "Application" submenus and look for events which are prefixed with a white X inside a red circle. The 6th column from the left will contain the Event ID which can be used to try and track down the source of the problem.

My computer shuts down if I click Firefox.I uninstalled it.I installed it again.Still makes my computer shut down.I really want help!

ok so,I click to open Firefox because I want to view some websites.Then my computer just shuts down.So I uninstalled it,then I installed it again.Click to open,it just makes my computer shut down.I really like using Firefox!Whatever do I have to do so that I can use it????!!

ok so,I click to open Firefox because I want to view some websites.Then my computer just shuts down.So I uninstalled it,then I installed it again.Click to open,it just makes my computer shut down.I really like using Firefox!Whatever do I have to do so that I can use it????!!

While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
I can't believe it destroyed like 8 hours of work!
I have a 15" mid 2011 MBP and Mavericks OS.

I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

My computer shut down and I had to erase everything. Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. How do I save all the music on the computer? will new music from iTunes erase the old?

my computer shut down and with help from Appel it turned out that I had to erase everything . Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. I do not have backup :-(
How do I save all the musicfrom the iPod on the computer?And if I buy new music from iTunes will it erase the music allready on the iPod ?
iTunes no longer recognise my iPod.
I hope someone can help!
Best Maria

See Recover your iTunes library from your iPod or iOS device.
tt2

Computer shuts down while playing Facebook games

I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.

rthec wrote:
I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.
The operating system, XP in this particular case, will shutdown the system to prevent damage to hardware if it encounters an instruction which can damage the system. It will usually logs an event which you can view by clicking Start, then in the Run field, type eventvwr.msc and click OK. Then open the both the "System" and "Application" submenus and look for events which are prefixed with a white X inside a red circle. The 6th column from the left will contain the Event ID which can be used to try and track down the source of the problem.

Computer shuts down when calibrating

Hi.. I've been having problems when trying to run the Battery Calibration and the computer shuts off when it gets to the discharge part of the calibration. Seems to be when it hits the 15 to 20% part of the discharge. I'm using a Compaq Presario CQ56-219WM and running Windows 7 64 bit Home Premium. The battery calibration that I am talking about is when you first start the computer... press ESC to get menu and press F2 for Advanced Diagnostics then Battery Calibration. It checks to see if battery is there.. whether it is charged and charges if needed then goes into the drain battery part to find lower limit or 0% of the battery. It doesn't show any errors detected up to the part of discharging the battery and don't even show that the test was even run in the error log of the Advanced Diagnostic Menu. I've tried restoring the Bios to default values, uninstalling and reinstalling everything (programs and drivers), did a restore drive to original and updating everything and all is STILL the same. I've tried calibrating in Windows with the Support Assistant and all I get is the battery needs calibrated is this (after running calibration - waiting 3 hours plugged in and recalibrating:
Status (upper left hand corner): needs calibrating (20) and Charge capacity 51%
Over to the right side of the Screen: Failure ID - OK Design Capacity 4400 mAh Full Charge and Remaining Capacity: 2254 mAh Terminal Voltage: 12366mV Design Voltage: 10800 mV Cell Voltage1: 4148 mV Cell 2 voltage: 4125 mV Cell 3 Voltage: 4093 mV Status: E0 AC Power: True and a CT Number of 6BUED05BBZUE1G and showing a charge of 100%.
I realize the battery is getting old but all of this came on pretty much at the same time (short battery life and loss of calibration). I'm also running default values of HP Power Plan. Any ideas? Will a battery going bad cause all this? Why doesn't the Calibration when first booting the computer, shut down instead of doing the discharg/recharge thing... ? The power supply checks ok (checked with AC/DC meter).

is your notebook still in warranty? Warranty status check web page
It certainly seems by your description that the battery has issues.
Battery warranty is for one year, so it would be a good idea to replace it. Be sure that you buy a guaranteed compatible battery that comes with a one year warranty.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My computer shut down and now my photos are missing

My computer shut down unexpectedly and now my photo library is empty in iPhoto. I can't figure out how to recover the photos.

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Computer shuts down during render/prerender

This was not my original problem but it has occured before and I know it will occur again.
My computer shuts down for no reason when I try to render or prerender video in Adobe Premiere Pro CS4. From what I can tell it is a general issue with premiere that I am having. I have tried multiple video formats, multiple video lengths, and multiple rendering options and I am still getting random shut downs during rendering.
Here are some specs for my computer which is a laptop:
OS: Windows 7 Ultimate (64 bit OS)
Proccessor: Intel Core 2 Duo @ 3.0 ghz
Ram: 8 gigs of it
Video: Nvidia Geforce 9600M GT
1 Hard Drive w/ 280 gb of space
As a recap.... My exact problem is that during the rendering or pre rendering proccess my computer simply shuts down as in it turns off.
I can also add that the computer does act strangely leading me to believe that theres some hardware or software incompatibility. While it is rendering I can hear the CPU fan pick up which is usually normal for any rendering application but what I noticed was that it doesnt stop speeding up. Its like if it was going into an overload and I can confirm that at its peak, the computer shuts down.
To add troubles... whenever I pre render any video and it succesfully renders.... Premeire will hang up really really bad if I try to play the pre rendered preview. In otherwords when you preview a video that it pre rendered it usually plays smooth and everything is fine. After I pre render something though and play it I can tell its locking up because the timeline bar is really jumpy and the video playback skips also.
This is the problem I would really love fixed. I usually have to button smash my keyboard until I lock premiere up and then once it unfreezes itself i can preview my work smoothly. This is however like a good 5 mins of my time trying to get the preview to play smoothly though so its really hurting how fast I can work.
If anyone can help me out I would greatly appreciate it. I will be trying to run the same stuff on my older laptop and observe the results. I personally think CS4 is incompatible with windows 7.

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

Computer shut down uninstalling old Thunderbird,while re-installing, it keeps on saying it must remove old Thunderbird and reboot, nothing happens - HELP

Similar Messages

Maybe you are looking for