Computer shuts down after exporting H.264 from mts file

My computer shuts down after trying to export a H.264 file from a .mts file. I did this with no problems a few days ago, twice! This time line is longer, about 6.5 minutes. I have a I 5 processor, a gtx 660 graphics card and 8 megs of ram. I exported audio as a wave file and added those to the timeline. In the events panel, I get a message: "file importer detected an inconsistency in the file structure of audience_end_short.wav. Reading and writing this files metadata (xmp) has been disabled". it said the same for another short bit of audio, .wav file. I thought maybe there was a over heating issue, but to no avail. Do I need to get an I 7 processor? Please help!

sorry about the spelling! Still going. About the driver issue. I was updating Geo Force drivers and my friend said to revert to the original install, which I did a while ago. That helped, but obviously didn't cure it. Wonder if I should do the same for windows updates. So although I'm still rendering after 2 hours, perhaps the new user acount will get me through this. So strange that I was able to render/export the exact files the other day. Like I said, this mts clip is longer by a minute. Plus, I got rid of the wav files that had a meta data issue. Thanks for helping me everyone. I'll keep you posted. But I do believe an I 7 processor will at least help in the speed department right?

Similar Messages

Computer Shuts Down On Export

I am running Vista on my laptop (very new) and every time I export from LightRoom my computer shuts down after about a third of the images. Wedding exports with 1000 images shut down 5-6 times before I can get them out and 60 images shut down at least once. I am not sure how to fix this problem!
Thanks!

Sound's like hardware, most likely. Could be related to heat, as exporting pushes the processing system to 100%. If it's new, I'd ask for a replacement or repair.

HT3964 I just upgraded to Snow Leopard then Lion and the computer shut down after installation. Now when it starts up it gets as far as the apple icon and then shuts down again

I just upgraded to Snow Leopard then Lion and the computer shut down after installation.
Now when it starts up it gets as far as the apple icon and then shuts down again
whenever I turn it on it loads that far and then closes.
HELP!

Restore your bootable backup/clone or Time Machine backup of Snow Leopard, launch Disk Utility from the install disc, repair the boot volume, and reinstall Lion.

Computer shuts down after connecting i-pod

my computer shuts down after i connect my i-pod nano new gen.
also tried to connect before computer is on but then my comp shuts down at login page.
after a few tries the computer stays on . but if i disconnect and connect again computer again shuts down.
i reinstalled drivers but nothing seems to work.
also when i manualy start i-tunes and then connect the i-pod the comp also shuts down.\
anyone a idea?
thnx in advance

Are you getting any sort of blue screen before the PC reboots? If so, what numerical and text codes are you getting with it? (ie 0x\[zeros/letters/numbers] CAPSANDUNDERSCORES)
If the blue screen mentions a specific file (for example, “ati3duag.dll”), let us know what that is called too. (Exact spelling, please.)
Here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
If you're not seeing a blue screen (or if you’re just seeing a flash of a blue screen before the PC reboots), we can use the following technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
With those settings in place, does a blue screen appear before the PC reboots?

I have a MacBookPro and just downloaded the new Firefox 4.0.1, whne I use the laptop wireless every the compute shuts down after a few minutes. What can I do?

I have a MacBookPro and just downloaded the new Firefox 4.0.1. When I use my laptop wireless the computer shuts down after a few minutes. What can I do?

Do you experience the same issue using other browsers, e.g. Safari?

My computer shuts down after about two minutes of use or at startup. What is the problem?

My computer shuts down after about two minutes of use or at startup. What is the problem?
Yesterday I used it for about ten minutes.
Yesterday was the first time using it after about 5 days.

Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
Thanks!

Computer shuts down after inactivity. Unable to revive.

Computer shuts down after few minutes of inactivity. Fans comes on and power light goes off. Unable to revive unless I "pull the plug" then do a normal reboot. This is something new started approx 3 months ago. I have toyed with the Energy Saver Preference, but only with the scheduling.

What iMac model is this? If it is an early iMac G5, it may be this issue:
http://www.apple.com/support/imac/repairextensionprogram/
If you have a third party USB device hooked up when your machine goes asleep (into Energy Saver), it may affect the ability of the machine to wake up since USB goes into low power mode, and the two will be confused how to handle the wake up.
If it is an iMac that is over 4 years old, then it may need a new clock battery.
Check for dust in the power port and power cable.

Computer shuts down after 5-15 minutes

After 5-15 minutes of inactivity the computer shuts down when on battery. As long as the computer stays active, it will not shut down; ie: netflix watch now not a problem.
Support had me do a hard reset with battery removed; repair permissions; and reset pram; but the problem continues. The Leopard I am using is an upgrade, clean install with latest update. This behavior does not occur when I run the computer off of an external usb inclosure with old Tiger operating system, running on the original disk . So this suggests to me that it is a software and not hardware problem. Also when plugged in the computer will eventually quit and restart on its own.
Is there anything else to try or is archive and install the only option left because I have a corrupted Leopard install ??
Thanks for any suggestions !!

rakki,
Just curious. When did this problem start? Possibly when you upgraded from 10.4 to 10.5? (10.4.11 to 10.5.5 even?).
I'm having similar though not identical issues with battery performance that started the day I upgraded to 10.5.5 from 10.4.11.
See this thread: http://discussions.apple.com/thread.jspa?threadID=1745812&tstart=0

Computer shuts down after unplugging the power cord

My computer is showing a Plugged in, not charging message, but it is at 88%. When I unplug the charger from the computer to work somewhere else, the computer totally shuts down and will not power up unless the power charger is plugged in. I tried taking the battery out and leaving the cord connected and the computer started fine. How do I get the computer to stop shutting down after unplugging? Any help is greatly appreciated.

Sounds like battery #2 has a short. When the system detects a critically low battery, it is likely to devote all power to battery charge until the batery reaches 5% or so. Try each battery seperately. If no power at any time, remove the battery, disconnect the AC adapter. Press the power switch for about ten seconds. Then connect the AC adapter, let it boot, then install the battery and check the charging status. This resets the power manager. I think one battery id bad, but you will need to test them one at a time. Good luck.

While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
I can't believe it destroyed like 8 hours of work!
I have a 15" mid 2011 MBP and Mavericks OS.

My computer shuts down after being unplugged

My powerbook G4 sometimes shuts down when I unplug it, even though the battery is fully charged. This seems to happen more often when I unplug it and then pick it up (or put it down). After I restart it, the clock and date have been reset to 1970.
Any ideas of what may be wrong?

Hi c,
Welcome to Apple Discussions.
How long does your PB run on the batt when it does not shut down after removing the power adapter? If a very short time, you may have a nearly dead batt, and the backup batt, even if it is still operational, only lasts a few minutes; once that is dead too, then date and time are reset.
I should have said this first, but just noticed that you said movement seems to cause the issue. That strongly suggests a loose battery. The "fix" can be as simple as wedging a thin piece of rubbery material between the battery compartment and the battery itself, on the side opposite the contacts, to make the contacts remain in contact at all times (earlier models had this issue, but it was supposedly fixed on later models, yet we still hear about it periodically).

My computer shuts down after 45 seconds from when I push the power button. Anyone have an idea why?

After pushing and holding the power button on my Mac the apple screen comes on and after a few seconds there is a loading bar that tries to load something for a few seconds then it shuts down. I would say it is approximately 45-50 seconds after pushing the power button. Power comes on then shuts right off. This all originated when I tries to log in as a different user. It froze for a while, then I shut down the computer with the power button. Because I couldn't so it from the apple icon on the desk top

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Hey!! i just moved from miami to vienna...i conected my desktop with a big convertor...to 220...and my computer shut down after one hour!!

Hello!!
I just relocated to Austria,Vienna...and I just recieved my moving from miami.
I just conecyed my computer with a convertor for electricity from 110... to 220 (europe)
it was working for one hour...and sudenly..it shut down completly!!
what can I do?
thank you!!
joanna

Joanna...You don't need and shouldn't use a convertor. If you look at the message I sent you back in June I suggested getting an adapter which only allows the plug to fit in the wall. someone else made the same suggestion.
I'm not sure why you bought a convertor. It's been six months since i sent the message and I don't know if you have been using the computer in Italy or why it is now not working, as I used mine in both Italy and Vienna.
You can buy an adaptor at any electirc store or at Saturn, a large store on Mariahilferstrasse fairly cheaply.
If you do get an adaptor and it still doesn't work, there are a few resellers in Vienna, but no Apple owned store. It's too small a market.
There are a couple of MacShark stores, one at the foot of Mariahilferstrasse near the Kunsthistoriches Museum. I There is also a very good store, honest and a good reputation called Digital Store at Stiftgasse 21, in the 7th district, not too far off of Mariahilferstrasse.
Since they are not Apple stores, you have to pay for almost anything they do, including just opening it up and checking it out so get an estimate before you have them do anything.
Good luck, but try an adaptor first.

AME Shuts Down when exporting H.264 Blu Ray

I have a current project that was shot in HDV and I am trying to export an H.264 Blu Ray file. This is a 4 Disk set and the other 3 files exported with no problems but for some reason I cannot get this last one (which happens to be Disk #3). I will start AME running as I am getting ready to leave my office. When I come back in the morning there is nothing open on my desktop, just the normal screen. Anyoen have any ideas??? Below are my export setting and computer info
Format: H.264 Blu Ray
Preset: Custom
Pixel Aspect Ratio: Widescreen 16:9
Profile: High
Level: 4.1
Bitrate Encoding: VBR 2 pass
Target Bitrate: 20 Mbps
Maximum Bitrate: 25 Mbps
Audio: PCM
Multiplexing: None
Computer
Windows XP Pro 64
Intel Core 2 Quad 2.5GHz
4 GB RAM
300 GB System Drive
1.5 TB Video Dive with 700 GB of free space.
Thanks
Phil

This is from the regular LOG.
5/9/2009 12:37:29 PM : Queue Started
- Source File: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\Kapadia Wedding_24.prproj
- Output File: V:\DVD's\Kapadia\From Premiere\Disk_3_HD.m4v
- Preset Used: Custom
- Video: NTSC, 1440x1080, 29.97 [fps], Upper
- Audio: PCM Audio, 48 kHz, Stereo
- Bitrate: VBR, 2 Pass, Target 20.00, Max 25.00 [Mbps]
That is it... It does not show that there was a problem or that it was completed.
I then went into the Errors Log and there was nothing about this particular project.
Do you think that maybe the PC is shutting down and restarting? Not sure how I would know that...
Dont get me started on the Pr not supported by XP 64 thing. Quite frustrating to me....
Phil

IPhone 4S shutting down after iOS7 and support from Apple Chat

So, my iPhone is shutting down suddenly with battery at about 40% and saying that it ran out of juice, asking me to plug in the charger. When I do it, it shows 40% again. It looks like other people have similar issues with not only the 4S, but iPhone 5 as well.
I tried to contact the char support and well, read by your self below. Not only nothing was solved, but the support just hanged up the chat on me, and didn't answer my last question. That's really not what I expected from Apple. Well, that's it, no more iPhone in my household.
Case ID is 537464016 in case anyone from Apple wants to check it out. I'm selling this iPhone and never coming back.
Now Chatting with Calvin
Thanks for contacting AppleCare chat support. My name is Janan. Please give me a moment to look over your information.
Please note: In the event that we get disconnected it's likely due to a system or connection issue. It is never our intent to disconnect from you. If you do get disconnected, please chat us back or go to [Contacting Applehttp://support.apple.com/kb/HE57http://support.apple.com/kb/HE57] for phone support numbers and refer to the case number on the email that you've already received.
Hi Janan
Hi Luccas, how are you doing today?
Good thanks. I have an issue with my iPhone 4S
Luccas, from what I see in the pre-chat notes you provided, it looks like you are having an issue with Battery life. Is this correct?
Since I updated it with iOS7, the phone is shutting down suddenly when the battery is below 40%
I wait then about 10 min, or I do plug in the charge, and the battery shows 40% again
I tried to restore the phone using iTUnes
twice
but the issue is still happenning
Did you set up your phone as new after restoring?
yes
How long until the unexpected shut downs started up again then?
straight away
I found your diagnostics… Give me a moment to have a look?
ok
Ok, there may be an issue with your battery, but we’ll need to have you do some troubleshooting before we can verify that it needs replacing. How does this sound to you?
sounds good
One moment while I tic the boxes of the things you’ve already done please
ok
Do you show any appellations in your App store that needs updating?
no
Do you lock your iPhone when not in use to shut the screen off?
yes
How bright have you set your display?
it's on automatic
Do you use Wifi mostly?
at home and at work yes, so it's on wifi most of time
Do you have a lot of applications pushing notifications to you?
no, the phone doesn't have a lot of apps, especially after I restored it
Understood
Do you use your phone for emails?
yes
On your phone, would you go to Settings > Mail, contacts, Calendars > Fetch New Data for e please?
yes
it's set to push
but I don't use the mail app from Apple
I use the Gmail application
Ah… Ok
So there’s no email used there.
Back up to the Settings page please?
ok
Go to General > Background App Refresh now
yes, I disabled most of the apps her
I just have the Gmail app and the Google Maps
as these are the ones I use most
LOL… You are the perfect user!
What about Location Services?
it;s on, but again, just for google maps
Ok
and the find my phone service
Exactly
Let’s go back into General then Usage please?
Sorry, Nevermind, I can view that from your diagnostics...
ok
Do you use Instagram?
yes
That’s caused some memory issues of late...
Your battery is starting to show wear though
I didn't have any issues before updating to iOS7
the battery was working perfectly fine
never have any shutdown
Your battery is also 2 years old
One of the updates addressed battery issues and since you’ve restored your iPhone, it appears that it is on its way out.
the battery was 2 years old last month as well, when I had iOS6 and was working fine
I have done all updateds
I certainly apologize about the inconvenience this issue is causing.
But since you’re using your phone correctly, your restore hasn’t had any affect, this is the only conclusion I can reach
so, what's the solution?
can I come back to iOS6?
I’m afraid there’s no way to go back to iOS 6
so, I can't come back to the OS my phone was working properly, and I have to stick with a OS where my phones shutdown in the middle of the day with half battery full
Again, it isn’t the fault of the operating system software.
so, can you explain me why not?
if with iOS6 the battery didn't have a problem
and suddenly, when I update, I have an issue?
You have restored your phone and set up as new. If that fixed the battery life, then it was a software issue. If not, it was a hardware issues
look, if I come back to iOS6, the batttery issue is gone
so, it's a software issue
One moment while I get a senior advisor for you please?
ok
There’s just a few minutes wait time.
no problem
Just checking back… Our chat volume has gone up since Phone Support closed. This isn’t a normal wait but I’m still waiting with you.
that's fine
Still waiting with you
ok
Luccas, your problem requires extra knowledge and skill so I've got Calvin, one of my senior advisors taking over from here to make sure your problem gets the attention it deserves if that's okay with you. It was my pleasure to assist you today and I will leave you in Calvin's capable hands.
Thanks Janan
Hi Calvin
You’re welcome… One moment and I’ll transfer you
You are now being connected to another Advisor. Please standby.
Thanks for contacting iOS. My name is Calvin. Please give me a moment to look over your information.
Now Chatting with Calvin
ok
Hello Luccas, I see that your device is shutting down when the battery gets to about 40%, is that correct?
correct
I am really sorry to hear that, I can see that being frustrating.
it shows that image saying to plug in the charges as the battery is dead
I looked over the diagnostic it shows pass but its in yellow.
yes, especially if you consider that was working just fine one month ago before I updated to iOS7
I understand, it may cause people to think its the software but really what happens is during a restore or update sometimes it just brings the existing issues to the surface.
As even though your battery pass, its in yellow signifying its ready to failed but it appears its already failing.
Normal battery passes, its in green.
Since you have already restored it as new. That pretty isolated the issue.
sorry, I still don't get it. In one version of the software, my battery lasted the whole day without any issues. Now, after updating, the battery shutsdown at 40%. That's software issue for me. And, more important, if I wait about 10 to 15 min and try to turn on the phone. It's back again, and last until is about 30%, than, the same issue occurs.
If iOS6 was able to handle the battery just fine. I would like to be able to install it again
I understand you do have some concerns regarding iOS 7 and would like to revert back to your previous software. In order to avoid compromising your device in anyway the software is only designed to move forward. Downgrading the iOS is a feature that Apple cannot assist with as well as recommend since it can negatively affect your device.
However, we are always open to suggestions from our customers. Using this website (apple.com/feedback) would be the best option for submitting your concerns directly to Apple. We love to hear from our customers and future updates may even include specific features suggested to us by our customers.
Now keep in mind we have hundreds of millions of iOS device out there and most of them are running iOS 7 and running it fine.
In my case, upgrade the software affected negatively my device.
and a quick search on google shows that a lot of people have similar issues as me
Ok, we're running in circles here
You can do a search for iPhone anything and you will bring up a lot.
I though you would come and offer a solution
but you're just appologizing
not the kind of support I would expect from a premium product
The solution would be an out of warranty paid service.
not sure if would pay the premium next time
I don't see this as a solution. Because was an upgrade of software that made my phone stop working properly
I am sorry, I would have to respectfully disagree. I do agree that you notice the issue after the update. However does not mean that the update cause the issue.
So, explain me why in iOS6 it did happen?
I am sorry but there is just too many possibilities out there and I would just be speculating.
ok, so, at the same time that doesn't mean that the upgrade it's the cause, it could possibly mean that it's the cause, do you agree?
So explain to me why hundred of millions of units are running it fine?
I can't say about the hundred million of units
and that's not an issue that I care about
If even a fraction of the people had this call. I would not be talking to you as there would be huge backup of customers waiting.
what I care about is that the phone I paid 800 swiss francs is not working after a software update
I have a problem, and I'm contacting the customer service, so I care about being taking seriously and looking at the issue in my device
telling me that hundred of millions of devices works, and mine doesn't, that's not helpful
Ok, let me have you call phone support in you’re region. So that they can open up a engineering ticket and get you a response directly from engineering.
United Kingdom
(44) 0844 209 0611***
so, now you're saying that the last hour of my time has been useless because it's not you that can solve my problem?
and worse, you're making my self calling someone else and loosing even more time?
What I am saying is you are not accepting my solution and you believe you are correct.
So lets go with your direction to get you an answer directly from engineering.
no, you're asking me to pay for a new battery
That is my solution.
and you're expeculating that's the solution
you're not sure about that
You disagree so lets go get you an answer from higher up, do you not like that solution?
Lets agree to disagree and find you the answer you want.
Period.
ok, but I don't want to loose more of my time to call someone. And pay for the call
Debating this with me is not going to get us anyhwere.
I can setup a call back for you if you like.
you have access to the customer service system and could open a ticket
What number is best to reach you at?
+44 07445376676
just for my information
what they will look at?
anything they will do differently?
Call is schedule for 8:00-8:15 AM.
tomorrow?
Saturday.
Greenwich time.
ok, again, can you tell me what they will look at? anything they can see that you couldn't?
Thank you for your time.
Your chat session has ended. Thanks for using Apple's chat support

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Computer shuts down after exporting H.264 from mts file

Similar Messages

Maybe you are looking for