Computer shuts down ever time I connect the IPOD Touch
My computer shuts down every time I connect my Ipod Touch. I tried holdin down the On/Off button simultaneously with the Home button as suggested in the trouble shooting section, but the computer still shuts down. The battery is fully charged.
Hi. Actually, I have the same problem. I've had the same problem for about a month now. At first.. it took me a while to realize that my computer turned off because of my ipod being connected. Because at first, it took a couple of hours or so before it would turn off. But now, at for the past 3 weeks or so, it turns off instantly when I connect my ipod to my computer. I've been googling ways to solve this problem - but couldn't find anything, and that's where i ran into this topic.
I know the problem isn't my ipod and ipod usb wire. I connected it to another computer to recharge, and it didn't turn off, and there were no problems. But when i connect it to my computer to update it, it turns off instantly. It doesn't even have time to update.
My CPU has 4 USB ports, and I tried connecting it to each of them.. but the same thing happens. I don't think it's my USB ports either, because i've connected other things to the USB ports, and the computer didn't turn off like it did with ipod.
I'd really appreciate it if an answer could be received regarding this issue.
Thanks.
Message was edited by: CrystaliqueFiary
Similar Messages
-
every time i connect my ipod touch 4th gen. it says this accessory is not supported by ipod touch so people recommended me to just buy a new charger, so i did, but the night before I got my new charger it stopped charging, what should I do now?
also my power button does not worked it got stuck so therefor it doesn't work, are there any ways i can help it get loose and working again?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
Does anyone know if the iOS 7 update will ever be available on the iPod touch 4?
Does anyone know if the iOS 7 update will ever be available on the iPod touch 4? And is iOS 7 even worth getting? I've read some articles about kind of getting iOS 7 by jailbreaking, etc but I don't want to do that. Some people are also saying that it will be available, is this true? I currently have iOS 6.1.5. Thanks.
As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB -
Computer shuts down when I click on the list or grid display button
I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!
Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps? -
I was just wondering because
I have always loved apple and then
I got my I pod touch and then
I found out about Siri I have
Always wanted to play with her
Ever sence I found out! So i
Just wanted to ask you
guys from appleApple itself does not respond to questions on the Apple Support Communities forums. Responses come from other Mac users like yourself. We don't know what Apple plans on doing but I am not sure the iPod Touch has the computing power to do Siri.
-
I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
Hi
Can anyone help? I am trying to connect my sons iPod to burn some music to it but I keep getting a message pop up stating that this version of iTunes is not compatible with this iPod and I need to remove my version of iTunes and install the 64-bit version. I have done this twice now, both times using the 64-bit download from Apple's download page, but the same message appears and the iPod is not recognized.
If anyone knows where I am going wrong I would be grateful for your advice.
Ta.Hi Tintin01,
Thanks for visiting Apple Support Communities.
If you're being repeatedly prompted to install the 64-bit version of iTunes, I'd suggest first completely uninstalling iTunes and all its related components using the steps found here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Once you've uninstalled iTunes and its components, install the latest version of iTunes found here:
iTunes 11.0.4 for Windows 64
http://support.apple.com/kb/DL1615
Best Regards,
Jeremy -
The I pod has gone blank and when I connect the USB wire to the laptop, nothing happens. no sound, no power to turn on the I pod.
how do you know if the battery is at life end. We just got this within a year.
please help.
thanksTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My coumpter restarts every time I connect my iPod touch
It was working just fine yesterday.
But now every time I connect it my coumpter restarts before I connect to iTunes or anything.It is also picking it up as a camera.
I dont know what to do and I got it just yesterday.
Help?I think you'll find an answer if you search this discussion forum for "ipod touch camera"; there seem to be plenty of other people with a similar issue. Try http://discussions.apple.com/thread.jspa?messageID=8581032� or maybe http://discussions.apple.com/thread.jspa?messageID=8257681�
-
HT1296 under My Computer using windows 7, does not recognize the ipod touch
Whwen clicking on My Computer , IPOD touch does not show up
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
can't stop itunes from changing the time on my ipod when I sync to computer
yeah and the time is correct. I was thinking there is a setting on itunes or something like that
-
You can transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can transfer other stuff by using the third-part programs discussed in this previous discussion:
Best iPod to PC
If you previously synced to another computer and do not have the backup files you will lose your app data. You will have to restore to factory defaults/new iPod and then sync to the new computer. -
After Upgrading iTunes to 11.1.5.5 on Windows 8.1, I can no longer coonect with USB my iPod Touch or my iPad Mini. Is there something I can do to fix this or should I wait for a new release of iTunes to fix this problem?
Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2
Maybe you are looking for
-
How can i set up a new imap folder on my own domain
I have my own personal domain on my own server and I am wondering if the only way to set up a new folder is via cPanel direct on my server - or can it be done through Mail?
-
I cannot open itunes on my imac. It has worked without a problem for over two years and sudenly can't. I open it on the desk top and it only shows itunes on the menu bar at the top. Itunes never reLLY OPENS...
-
Third party applications not working
So I had to get a new pearl the other day and everything is the same, but had to redownload my third party apps (like tsn, cnn, etc.). none of them work, they just say redirecting and then waiting and never go to the site, but if I go to that applic
-
Mpeg 2 for Blu-ray audio exports with missing frames at beginning and end.
Im using a Matrox Axio LE system and the Matrox Media encoder to export an Mpeg 2 for blue-ray. My footage is shot in 1280x720p 59.94 drop frame. I have found that after exporting the file from the encoder and bringing it into Encore CS3 that the aud
-
Yosemite 10.10.3 issues with Photoshop CC
I'm having issues after updating to 10.10.3. Photoshop CC crashes and forces a reboot when trying to open a JPEG.