Computer shuts down usually while watching videos

Hi,
So, since I recently formatted my computer, it has been crashing down unexpectedly usually while watching videos on youtube or maybe a movie online.
It happens at least once in a day.
I may add that I also had a new optical disc drive installed, just in case that has to do with anything.
This are my computer specs:
Model: MacBook Pro
Identifier model: MacBookPro8,1
Processor: Intel Core i5
Processor velocity: 2.3 GHz
Processor Quantity: 1
Total core quantity: 2
Caché level 2 (per core): 256 KB
Caché level 3: 3 MB
Memory: 4 GB
Starter ROM version: MBP81.0047.B27
SMC Version (sistem): 1.68f99
Serial Number (sistem): C2VG82S0DRJ7
UUID hardware: 1291076C-AD65-51D2-9C42-3A6DC9E4837B
Sudden movement sensor:
       State: Activated
Graphics: Intel HD Graphics 3000 384 MB
This is the error that appears when restarting automatically:
Anonymous UUID:       0A3B7800-323E-70FF-8A66-609F2453452E
Mon Jan 26 21:24:25 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff800361e80a): Kernel trap at 0xffffff80035759b7, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000ff0, CR3: 0x000000000635e000, CR4: 0x00000000000626e0
RAX: 0xc379350cbcea0087, RBX: 0x00000000000003e8, RCX: 0x0000000000000000, RDX: 0xffffff8003c94500
RSP: 0xffffff809c913070, RBP: 0xffffff809c913150, RSI: 0x0000000000000000, RDI: 0xffffff8006848360
R8: 0xffffff801483c000, R9: 0x000000000000fcff, R10: 0xffffff8003b55a00, R11: 0x0000000000000000
R12: 0xffffff801483c000, R13: 0x0000000000001000, R14: 0xffffff8006848360, R15: 0x0000000000000000
RFL: 0x0000000000010206, RIP: 0xffffff80035759b7, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000ff0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff809c912d20 : 0xffffff800353a811
0xffffff809c912da0 : 0xffffff800361e80a
0xffffff809c912f60 : 0xffffff800363a443
0xffffff809c912f80 : 0xffffff80035759b7
0xffffff809c913150 : 0xffffff8003a5f186
0xffffff809c913190 : 0xffffff8003a5f294
0xffffff809c9131c0 : 0xffffff7f85c02226
0xffffff809c913220 : 0xffffff7f85c02c1c
0xffffff809c9132c0 : 0xffffff800387731b
0xffffff809c913640 : 0xffffff800388a509
0xffffff809c913750 : 0xffffff800387f56e
0xffffff809c913c00 : 0xffffff8003871209
0xffffff809c913c50 : 0xffffff8003871579
0xffffff809c913e20 : 0xffffff800385d1c1
0xffffff809c913e40 : 0xffffff80037d68a2
0xffffff809c913e70 : 0xffffff80037b36be
0xffffff809c913e80 : 0xffffff80037ad87e
0xffffff809c913f40 : 0xffffff80037b0dce
0xffffff809c913fb0 : 0xffffff80036192c7
      Kernel Extensions in backtrace:
         com.osxkernel.tuxlerext(1.0)[7A2AE3E1-6214-57DC-0812-824B2FD1058A]@0xffffff7f85 c01000->0xffffff7f85c04fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000003200000
Kernel text base: 0xffffff8003400000
__HIB text base: 0xffffff8003300000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 13685498443160
last loaded kext at 81648300801: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f85812000, size 36864)
last unloaded kext at 244605465436: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f84429000, size 65536)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.2
com.osxkernel.tuxlerext 1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleMikeyDriver 267.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
com.apple.kec.Libm 1
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Uninstall Tuxler. Go to the developers web site for uninstall instructions.
Ciao.

Similar Messages

While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
I can't believe it destroyed like 8 hours of work!
I have a 15" mid 2011 MBP and Mavericks OS.

Computer shuts down while loading the progress-bar

SPECS:
MacBookPro 13-inch
Early-2011
I recently installed Yosemite in my computer, hours later while I was using the new OS X my computer freezed. I held the power button and it turned off. Now, I'm trying to power on the computer and when the progress bar is in 50% the computer turns off.
I need help ASAP

rthec wrote:
I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.
The operating system, XP in this particular case, will shutdown the system to prevent damage to hardware if it encounters an instruction which can damage the system. It will usually logs an event which you can view by clicking Start, then in the Run field, type eventvwr.msc and click OK. Then open the both the "System" and "Application" submenus and look for events which are prefixed with a white X inside a red circle. The 6th column from the left will contain the Event ID which can be used to try and track down the source of the problem.

Computer shuts down while playing Facebook games

I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.

rthec wrote:
I've seen some of the threads regarding this but none of the fixes work for me. I formatted my hard drive for reasons other than this so it has a fresh install of Windows XP Home Edition, the latest video drivers, and the latest Flash. When my wife plays Cityville or Castleville, her computer shuts down. I checked the system logs and nothing is there regarding the shutdown. I tried changing the hardware exiliration setting and that didn't help. We've tried the games on Firefox and IE 8 with the latest updates and it still doesn't work. Any help will be appriciated.
The operating system, XP in this particular case, will shutdown the system to prevent damage to hardware if it encounters an instruction which can damage the system. It will usually logs an event which you can view by clicking Start, then in the Run field, type eventvwr.msc and click OK. Then open the both the "System" and "Application" submenus and look for events which are prefixed with a white X inside a red circle. The 6th column from the left will contain the Event ID which can be used to try and track down the source of the problem.

When viewing a video computer shuts down,says no sync ,why

when i view a video such as on yahoo.com,it will play about 2 minutes and computer shuts down, and on my screen it says no sync

What version of flash player do you have installed? http://www.adobe.com/software/flash/about/
Please post the graphics section from about:support

Computer shuts down while updating Ipod?

Hi
I have a Video Ipod and an old laptop, my problem is that my computer shuts down 2 minutes after I open Itunes.
My question is, whether the Ipod saves the little data that is transfered, when the transfer is abrubted by the computer shutting down?
(If it saves it I can keep on updating tiny bits of my music libary, otherwise I will stop wasting my time restarting the upload proces over and over again)
Thanks

You might consider reposting this question in one of the iPod discussion forums here - which are for both Windows and Mac user problems.

Computer shuts down while importing

This doesn’t happen with every song I try to import in iTunes, but let’s say with 2 out of 10 songs, while importing my computer simply shuts down. Just before it dies on me it says something like: Error, disk locked. I just can’t figure out what’s his problem.
Hp Pavilion dv1000 Windows XP

Problem solved for me... I changed the place of my computer which seem to have helped. I think the problem was heat... too much heat and now I can import a full CD without my computer to shut down. If it is not heat, I read that it could be bad memory. if my computer shuts down again, I will check the memory of my computer.

Computer shuts down during render/prerender

This was not my original problem but it has occured before and I know it will occur again.
My computer shuts down for no reason when I try to render or prerender video in Adobe Premiere Pro CS4. From what I can tell it is a general issue with premiere that I am having. I have tried multiple video formats, multiple video lengths, and multiple rendering options and I am still getting random shut downs during rendering.
Here are some specs for my computer which is a laptop:
OS: Windows 7 Ultimate (64 bit OS)
Proccessor: Intel Core 2 Duo @ 3.0 ghz
Ram: 8 gigs of it
Video: Nvidia Geforce 9600M GT
1 Hard Drive w/ 280 gb of space
As a recap.... My exact problem is that during the rendering or pre rendering proccess my computer simply shuts down as in it turns off.
I can also add that the computer does act strangely leading me to believe that theres some hardware or software incompatibility. While it is rendering I can hear the CPU fan pick up which is usually normal for any rendering application but what I noticed was that it doesnt stop speeding up. Its like if it was going into an overload and I can confirm that at its peak, the computer shuts down.
To add troubles... whenever I pre render any video and it succesfully renders.... Premeire will hang up really really bad if I try to play the pre rendered preview. In otherwords when you preview a video that it pre rendered it usually plays smooth and everything is fine. After I pre render something though and play it I can tell its locking up because the timeline bar is really jumpy and the video playback skips also.
This is the problem I would really love fixed. I usually have to button smash my keyboard until I lock premiere up and then once it unfreezes itself i can preview my work smoothly. This is however like a good 5 mins of my time trying to get the preview to play smoothly though so its really hurting how fast I can work.
If anyone can help me out I would greatly appreciate it. I will be trying to run the same stuff on my older laptop and observe the results. I personally think CS4 is incompatible with windows 7.

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?

My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?

This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind.

Help! My computer shuts down semi-unexpectedly.

Please somebody help! My computer shuts down semi-unexpectedly. I say 'semi' unexpectedly, cos, by now it seems an accident waiting to happen ONLY when I play a 3D game.
Now, whenever I play a 3D game there's a good chance the computer just shuts itself down, without ANY warning. Can be within 5 minutes, can be after an hour, it sometimes doesn't happen at all.
After this the computer will not start up at all, and the D-bracket tells me the processor is the culprit. At first I waited a while (+/- one hour) and the thing would start up again as if nothing happened.
After it started happening more frequently (or maybe I should say, 'after it didn't go away by itsself') I just didn't wait, but tried to find out what went wrong, and how to fix it.
All I have learned so far is that if -after a 'radical shutdown'- I release the levers on my processor's heatsink, and wiggle it a bit, then refasten them the computer will start up again, no problem. But ONLY if I disconnect the powercable from my machine ENTIRELY first.
I'm don't have the technical knowledge myself to make anything out of this, and am at my wit's end by now.
My specs:
mobo: 865PE-NEO2
mem: 512MB Pc3200 dual channel
processor: PIV 2.4GhZ
video: Radeon9700PRO
PSU: 400W
Also:
- All BIOS frequencies are at default
- Got six ventilators in a case that is always open.
- Got Corecenter running in the background with very tight temperature alert settings.
- I have no other problems with my computer, and I do not overclock.
All this at least leads me to believe it's not a power-, frequency- or heat issue. But then again, I'm no expert. At all.
Any help or insight would be greatly appreciated.
Thanks,
Juju

Is ur CPU OCed ?????
And whats ur VDimm, cuz i had the same Problem when running Gothic II with all details aon 1600x1200 2xAniso & 4xFSAA.
I believe the Problem is that ur RAM shuts down under full load if ur VDimm is too low, because all MSI Boards dynamically OC a littel (3-4 Mhz FSB) when running under full load (I read that on http://www.tomshardware.com).
On my system with standard Vdimm @2.5 V and FSB Oced to 250 my system would crash almost everytime when I played Gothic II. Then i found out that the board booted at 407 Mhz DDR Clock. That's when i started suspecting that my Rams couldn't handle 407 Mhz when running at an extremely low 2.5 VDimm.
So try the following:
-Increase VDimm from 2.5 up to 2.7 V in small steps and check ur system stability every time stop when everything seems fine.
-If u'r Oced don't go for FSB 250 (and multiplier at 5:4) try sth. like 243 so even if dynamically oced ur Rams won't go too far above 400 Mhz.
P.S.: My VDimm is now at 2.6 and FSB at 244 and everything is fine.

Computer Shuts Down Randomly

My computer shuts down when disconnected from power cord. I have to plug it back in to get it to start again. It seems to be more frequent when watching video. I have tried the SMC reset and will post my power stats below. Do I need a new battery or any other suggestions?
Battery Information:
Model Information:
Serial Number: SMP-bq20z951-3997-cbe
Manufacturer: SMP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 002a
Hardware Revision: 000a
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 3074
Fully charged: No
Charging: No
Full charge capacity (mAh): 3421
Health Information:
Cycle count: 152
Condition: Good
Battery Installed: Yes
Amperage (mA): -969
Voltage (mV): 11959
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 3
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No

Hey!! Wondering if you've learned anything more about this issue? I'm running my macbook with some similar issue.. when running on batt, shuts down at random, can't find any pattern as yet.. I have found that it shuts down in Hardware test mode on batt as well.. I've done a good AHT, SMC, pram reset.. everything else is fine... just this shut-off thing... my batt is in perfectly good condition.. and plenty of charge.. I can't decharge the batt anyway, it won't run long enough unplugged!! I've thought that checking into Snow leopard might help.. but not seen anything about that yet.
Any info would be great
Thanks
JW

Satellite A215 - computer shuts down at random

I own a Satellite A215-S6804, and I've had it for about a year and a half. The past six months or so, I'll be in the middle of doing something and the screen goes completely black. It often happens when I play one of the Windows games (like Spider Solitaire), but it has happened when I play a video from the Internet, also. I know it's not just the light in the monitor, because I can't see anything if I look close enough, and if music is playing at the time, it completely stops. It appears as though the computer shuts down but the screen stays on. I also have had the laptop plugged in with the battery in, but within the last month or so decided to take the battery out while it was plugged in (this made no difference; the problem still persists). What's happening to my laptop?

This has been happening to me recently. Twice this eveing. What is happening? How do we fix it? Or is something dying in it? dinkysews

My MacBook Pro 13'' shuts down randomly while connected to the power cord.

Alright, so my Mac is shutting down while being connected to the power cord. Though, when I unplugged it, it runs just fine.
I've read up on the other random shut downs but they seem to be different in my case. I was only surfing youtuve on Firefox, granted I had a few other tabs open but they weren't doing anything that would run the computer hot, and it shut down out of no where. The battery was full and it was still connected to my power cable. The screen went blank and the computer was completely off. I noticed that the light on the plug in wasn't on and switch the outlet that the computer was plugged into and replugged it into my computer. The light came on and after about three or so times of pressing the power on button it came back to life. Though, it stayed on the start up, white apple page and just spun. After a while it looked as if it was about to go to my password page but it shut down after gently moving the computer. The power cable light went off once again. I unplugged it and replugged it into my computer but the light would not come back on. After just removing the cord and pushing the button a few times my computer came back to life and I logged in as normal except for the fact that after it came back on the date and time was reset and several applications needed permissions. It also randomly logged me out of my Facetime account as well.
All in all I was wondering if anyone else had a similar problem and know what's going on or if this is new. Could it be some kind of spark in the power cable from a broken wire that made my computer shut down or is it something attacking my computer?

Please make a Genius Appointment and take it in for service.

Help with ipod and computer shut downs...please.

I've posted this in two other forums to no avail -- lots of views, but no help.
My family now has 3 ipods (we only had 1 before) and yesterday I was trying to get them all set up - updates on the actual ipod, and I've updated itunes to 7.5. There are two issues here:
1) I am not able to register ANY of the ipods. I get all the way through the process to the very end and then it gives me an error message (after clicking the "No thanks" at the bottom of the page that asks if you want to download the videos) saying that the service couldn't be found? Or something like that. Ok, fine...I can handle not being able to register them for the time being.
2) I could keep itunes on all day long, as long as the Ipod is NOT CONNECTED. As soon as I connect the ipod (any of the 3 new ones - they all do the same thing) - ok, maybe not as soon as, but shortly thereafter - my entire computer shuts down. No error message, no blue screen of death, no warning - it just shuts down. It might be after I move a song from the "purchased" folder to the actual ipod. Or, as happened yesterday, it's right smack in the middle of a download (happened with both videos AND songs) and then of course, I have to try and purchase it again. I'm not even sure if it took my money already, but if it did, I'm SOL because I paid, but don't have the video/song since it never finished downloading.
I've done everything that's been recommended to me - I disabled all my start up programs (except the windows ones) and that didn't resolve anything.
My system is as follows:
Windows XP Home Edition (all updated except for microsoft office 2003)
Service Pack 2
AMD Athalon 64 3000+
1.81 GHz
2GB RAM
Not sure what else you need to know, to try and help me resolve this. Thanks for your time.

I've posted this in two other forums to no avail -- lots of views, but no help.
My family now has 3 ipods (we only had 1 before) and yesterday I was trying to get them all set up - updates on the actual ipod, and I've updated itunes to 7.5. There are two issues here:
1) I am not able to register ANY of the ipods. I get all the way through the process to the very end and then it gives me an error message (after clicking the "No thanks" at the bottom of the page that asks if you want to download the videos) saying that the service couldn't be found? Or something like that. Ok, fine...I can handle not being able to register them for the time being.
2) I could keep itunes on all day long, as long as the Ipod is NOT CONNECTED. As soon as I connect the ipod (any of the 3 new ones - they all do the same thing) - ok, maybe not as soon as, but shortly thereafter - my entire computer shuts down. No error message, no blue screen of death, no warning - it just shuts down. It might be after I move a song from the "purchased" folder to the actual ipod. Or, as happened yesterday, it's right smack in the middle of a download (happened with both videos AND songs) and then of course, I have to try and purchase it again. I'm not even sure if it took my money already, but if it did, I'm SOL because I paid, but don't have the video/song since it never finished downloading.
I've done everything that's been recommended to me - I disabled all my start up programs (except the windows ones) and that didn't resolve anything.
My system is as follows:
Windows XP Home Edition (all updated except for microsoft office 2003)
Service Pack 2
AMD Athalon 64 3000+
1.81 GHz
2GB RAM
Not sure what else you need to know, to try and help me resolve this. Thanks for your time.

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Computer shuts down usually while watching videos

Similar Messages

Maybe you are looking for