Computer shuts down when not plugged in

When my computer is not plugged in it will not stay on. I've tried removing the battery and putting it back in and restarting the computer many times. Any help would be very much appreciated as to what I should do.

Try resetting the SMC first http://docs.info.apple.com/article.html?artnum=303319
Then check your battery version System/library/systemconfiguration and check is 1.2 if it is 1.3 drag it to trash and reboot then run software update to install 1.2
Check firmware update in applications/utilities
Finally calibrate the battery http://docs.info.apple.com/article.html?path=Mac/10.5/en/9036.html
If none of those help welcome to the club of the sudden shutdown...

Similar Messages

Shuts down when not plugged in

My new (got it in July) MacBook shuts down when it's not plugged in. I usually turn it on and it will last around 2-3 minutes before shutting off completely, then if I try to turn it on it will make the turning on sound and immediately shut down. If I plug it in it will stay on. I looked at downloading OS X 10.4.8 in order to download the suggested firmwire to help with this issue, but will that cause me to lose all of my photos and everything else stored on my computer? Could there be any other solution to my malfunction?
Thanks for your help!!

Hi -
When it's plugged in ...does your battery show a charge? Also, if you press the little button on your battery (on the bottom of the macbook) a series of green led's should tell you if you have a charge. just asking this because your macbook may not stay on if your battery is not charging/dead.
Yes, you should also update you system and firmware as well.

IPhone 3G shuts down when not plugged in

Hello,
I have had this problem for awhile and now just getting to troubleshoot the issue. Basically the phone appears to take a charge after it's been plugged in to my computer and/or outlet, however when removed it shuts down after 30 seconds or so and I have to reboot. Is this a battery issue or another underlying issue? Can it be fixed? I took the phone to the apple store but they were not any help due to no warranty. Thank you!

My 3G's problems have only gotten worse with each new update. Now I literally can't use it continuously for more than two minutes without a full charge going down to zero. I can basically just call people on my 3G and that's it. I probably need to get a new phone now, but with the iPhone 5 possibly coming out this year I want to see if the iPhone 4 (and iPad 1) will go through the same ordeal with iOS5.
I think Apple just needs to learn how to make their software more scalable and learn to support different versions of their OS simultaneously.
With so many models in use it's almost become the same as their personal computers. They shouldn't continue to just support one updated OS optimized for one specific model. Microsoft continues to update and support Windows at least one generation back from the current version because they know there are people who are going to own these things for four years at a time.

My computer shuts down when I plug in my iPhone 5. Please help!

I have a new iPhone 5, and when I plug it into my PC, it syncs for a few minutes and then my computer abruptly shuts down. This is my 3rd iPhone model (previously 3G, 4, and now 5), and I've never had this problem before. I reinstalled windows 7 home premium, and reinstalled itunes, but this problem persists
Any ideas?

Also, I do not have a webcam on this computer, so it can't be an old camera driver... (as was the case for others with this same issue...)

MBP shuts down when not plugged into wall

hey there,
was wondering if anyone has experienced this paritcular problem or knows what to do...
I've had my MBP for about a week now, and I just notcied a day that it randonmly shut down... but it was only once, so I though it wasn't that big of a deal. I left the computer charging all night ast night, and when I tried to start it without it being connected to the wall, it wouldn't boot. I checked my batter power, which is 89% full, reset the PRAM and reset all of my premissions, but it still shuts off everytime the DC adapter isn't plugged in. I aso ran the memtest program for RAM which someone on this forum had suggested, but it says that everyhting is A-Ok... What do i do? Somebody, please help!

I am having the exact same problem as you! The computer will run all day plugged into the wall, but after I remove power, it shuts down within 10-15 minutes. It usually refuses to start up again at all until you plug it back in, even though the lights on the battery indicate full charge. After plugging in and restarting, OS X still reports full battery charge. I have tried resetting the PRAM and PMU, and also cleaning the magsafe connections. Apple Hardware Test reports no problems.
I added a stick of Techworks memory from OWC when I got the computer. Other people with sporadic shutdown problems seem to be pointing to bad memory as the culprit. I don't know if that applies here though, because the problem only happens on battery power. Also, I installed the memory as soon as I got the computer and it's been working fine for almost a month now. My shutdowns didn't start until a couple of days ago. I think i will remove this extra stick of memory and see if the problem goes away, just in case. Maybe you should try removing the additional memory you got from the apple store to see if you got a defective piece.
I haven't tried calling apple yet regarding this. Have you? I'm curious to see what they say about it.
MacBook Pro 2.0GHz/2GB Mac OS X (10.4.5)

Computer shuts down when not in use

iMac 21" using IOS 10.6.8 goes to sleep and then shuts down. Any suggestions?

Hello, some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Computer shuts down when i plug in iphone

Day 1 of iphone - Soon as i plug it in computer restarts itself. Then when it comes back on a black screen which gives me options to start windows normally or safe mode etc. When i enter normal it starts up as normal then all of a sudden it resarts again... Will keep doing this forever.
Day 2 - Plug in phone and works perfectly, Hooray!
Day 3 - went to play a game app. And it wont work... None of my apps work.
Went to plug it into my computer and am now having the same problem as day 1.
If any one can help work out what's going on...

Hello, Below are a couple articles to hopefully assist with this today.
If you find that you have
-Performed all Windows Updates
-Performed all updates from your computer manufacture
-Updated iTunes
-Updates hardware drivers of devices connected to the system
*And the computer is still rebooting when iPhone is connected. Please connect it to another computer to see if the same thing occurs. Also please ensure you have tested all USB Ports, and disconnected any un-needed USB Devices.
http://support.apple.com/kb/TS1502

Computer shuts down when plugging in my Ipod classic

Can anyone help me with this? My Ipod plays fine, I have used the 5 r's of truobleshooting, but my computer shuts down everytime I plug in my ipod to the USB. If I keep the Ipod plugged in and restart the comp., Itunes recognizes the Ipod but it says it is corrupt and asks me to restore. The restore progress bar comes up, but it never finishes. Please help.

Any help in this document? http://support.apple.com/kb/TS2280

Imac shuts down when not in use

I purchased my 21.5" imac July 9, 2011 with Snow Leopard. No problems for 1 month. Then about August 12th or so, my imac started to mysteriously "shut down" when not in use. I'll be working on it, then get up to go pour myself a cup of coffee or something...then I come back to my computer that has now shut off. It is NOT asleep...it is OFF. So I turn it back on and it is fine. This has happened a few times now within a week. Anyone else have this problem?
By the way, I am now running Lyon, as of August 18th. When the imac shut down, I was usually viewing photos or on the web.
thanks!

First thing I would try is to reset the SMC, it can help with power related problems. Shut down the Mac and unplug everything including the power. Press and hold down the power button for 10 seconds. Plug in the computer but be careful not to press the power button as you are plugging it in. Wait a few seconds and turn it on. Hopefully it won't happen again. There is always Apple Support. Don't let the problem persist until your free phone tech support has expired (3 months). I would also recommend using the iMac with an UPS, and at the very least, a high quality surge protector.
If you have MS Word or a similar word processor you could try enabling the autosave feature and set it to 1 minute intervals. Keep a document open and if you come back to the computer and it has shut down, you can look at the last time the document was updated and know what time the comptuer turned itself off. It could be useful in diagnosing the problem.

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Computer shuts down when i try to sync my ipod

Computer shuts down when i try to sync my ipod

Just took out the book from the library "Sams Teach Yourself itunes 10 in 10 minutes" by Brad Miser.
Basics for problems syncing:
-restart computer
-make sure device is not out if power
-try a different usb port...BTW....I contaminated a usb port by someone spilling drink on the usb port end of my ipod cord...bad...
-run apple's web-based device assistant
http://support.apple.com/kb/TS1495 (windows) or http://support.apple.com/kb/TB1591?viewlocale=en_US (mac)
clink for the device...etc.
this book looks great

ITunes shuts down when I plug in my iPod

I've used my iPod without a problem since Christmas. For the past week, when I plug in my iPod, iTunes shuts down due to an unnamed error.
I have reinstalled all my USB drivers, removed all of my Apple software twice and reinstalled it twice (once with the guidance of an Apple tech via phone). The Apple tech guy sent me to the Apple store to replace my iPod, which I did. But none of that has fixed the problem.
So now, I'm left with an empty iPod that can't sync with my library because iTunes keeps shutting down when I plug in the iPod. The people at the Apple store said they couldn't help me further because I have a PC. The people at Microsoft won't take any responsibility because iTunes is an Apple product. So, I'm left with a $200 iPod that is suddenly for some unexplained reason, shutting down iTunes. So now, both the iPod and iTunes are worthless.
Does anybody know how to fix this problem? I'm a singer and depend upon my iPod for rehearsal, so I need it fixed ASAP. Any help would be much appreciated.
Message was edited by: WhyWon'tThisAcceptMyName?

Sorry I wasn't very clear the first time. Changing the Drive Letter is done through Disk Management in Windows. I suggested you open the itunes preferences in hopes that you would then be able to connect your ipod without it crashing.
To change the drive letter:
Since we know this trick works
First open itunes, then select Edit-Preferences and leave this open.
Then, follow the steps [here|http://support.apple.com/kb/TS1493]
I use Q, R and T for my ipods so the computer doesn't confuse it with other removable devices.
Message was edited by: hmacross

Computer shuts down when burning

Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
Toshiba Satellite

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Computer shuts down when trying to create or open a pdf file

My computer shuts down when trying to create or open a pdf file.

In that case, you need to update the Acrobat Version at your end. Click on Help -> Check for Updates. Download and install the updates. Make sure your version is 9.5.1

IPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?

iPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?
should I bring it to apple ?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.
Replacing or even suggesting replacing hardware without doing basic troubleshooting first is not very smart.
If basic troubleshooting does not resolve, take it to Apple for evaluation. There is no obligation to pay for anything, the evaluation is free.

Computer shuts down when not plugged in

Similar Messages

Maybe you are looking for