Computer shuts down when using Aperture

Hi, does anyone knows what cause Mac to shut down? It first happened when I was using 1.5, stopped behaving this way for a while but now its back shutting my Mac down again. Tonight, it shut down when I was making batch adjustments to several images. When I turned my Mac back on and went back to the same Aperture project, it shut down again. I did this a few times but always the same result.
What is causing Aperture to shut down my computer? Could it be due to lack of memory or something more sinister?? Please help folks.
Mike

RAM anomalies immediately came to my mind too.
Note that 3 GB is a very limiting amount of RAM for a Mac Pro anyway. RAM is inexpensive now. I suggest that you add 4x2GB matched RAM; one good source is OWC: http://otherworldcomputing.com/. The new RAM should be installed on the top riser, old unmatched RAM removed or installed on the bottom riser.
Make sure that Aperture and the OS are fully version-current. Immediately prior to and immediately after every installation of any kind (essentially anything that asks for sysadmin password) I recommend repairing Permissions. Note that repairing Permissions at other times does not have the same effect as immediately prior to and immediately after installations; i.e. repairing Permissions is not some kind of magic fix to use after problems present.
On the Photoshop forums for years there have been many instances of some folks getting poor or unstable performance out of setups that other folks get good performance out of. We see the same thing here on the Aperture forums. The suggested protocol of repairing Permissions is one of the routines that many of us with long term good Adobe performance have tended to follow.
There are many tens of thousands of files with Permissions settings. IMO maintaining them in a consistent state immediately before and after each installation of any kind is a potentially useful protocol with no down side risk.
Good Luck!
-Allen Wicks

Similar Messages

Computer shutting down when using iTunes

Everytime I try to download/update something via iTunes, my computer completely shuts off. It has never done this before and only happens when using iTunes.
Any thoughts or suggestions?

Not to suggest the obvious, but have you updated and run your Malware/spyware software lately? If you don't have one, ewido.com has a free trial, and it's fantastic.
This is the easiest thing to try, so if this doesn't work, post back and we'll try to make some other suggestions...
Good luck!

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Computer shuts down when I open itunes Store

Computer shuts down when I open itunes Store. I don't know why or how to fix it.. It used to work, now it doesn't. I haven't done anything differently. I tried to 'repair' it in the add/delete programs.

Some more info.................I have uninstalled and reinstalled iTunes and Quicktime. No fix. I can access the store on my other desktop computer which I also updtated to the newest version, so I think it's some setting in my laptop. As I said, it works great until I click on "iTunes Store" then it shuts the whole program down.

Computer shuts down when burning

Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
Toshiba Satellite

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

Computer shuts down when trying to create or open a pdf file

My computer shuts down when trying to create or open a pdf file.

In that case, you need to update the Acrobat Version at your end. Click on Help -> Check for Updates. Download and install the updates. Make sure your version is 9.5.1

Computer shuts down when i try to sync my ipod

Computer shuts down when i try to sync my ipod

Just took out the book from the library "Sams Teach Yourself itunes 10 in 10 minutes" by Brad Miser.
Basics for problems syncing:
-restart computer
-make sure device is not out if power
-try a different usb port...BTW....I contaminated a usb port by someone spilling drink on the usb port end of my ipod cord...bad...
-run apple's web-based device assistant
http://support.apple.com/kb/TS1495 (windows) or http://support.apple.com/kb/TB1591?viewlocale=en_US (mac)
clink for the device...etc.
this book looks great

Software shuts down when using the lightning effects filter. Help!

Software shuts down when using the lightning effects filter. Help!

Have you done a Forum search yet?
Is your GPU driver up to date?
What are your version of Photoshop, OS and GPU anyway?

MBP suddenly shuts down when using the superdriveP shuts down when u

Randomly my husband:s MBP shuts down when using the super drive. What could be the cause of this?
Appreciatte your Help

Yeah, I hope it is just a firmware-problem. AND that Nokia will release an update soon. The version on my phone now is 021.013, and it is from July. A firmware update is long overdue now, especially after all the other problems reported with this phone. And btw I have turned the phone on and off several times without this helping to fix the radio-issue...
I guess I will have to return the phone soon, if Nokia is unable to release a fixed firmware.

Computer shuts down when battery is at 45% used

When running on the battery the computer shuts down completely when the battery shows about 65 % left. Then I have to use the command start to get it going again, any thoughts?

Welcome to Apple Support Communities
Reset the SMC (System Management Controller) and re-calibrate the Battery - make sure you do this re-calibration every 2-3 months (I'm guessing you've never done it?)

IMac shuts down when using Safari 2.0.4

My iMac shuts down when I visit certain websites such as Pogo or video sites. Took it to the Apple store and of course the problem wouldn't replicate there. They kept it to check out the scripts and logs to see if they could find a problem - without success; although they did suggest my house is haunted. Brought it home and it quit again.
We thought perhaps we were getting interference from other wireless devices and unplugged our cordless phone which worked for a day. The computer always turns back on so its more of an annoyance than a real problem, but I'm baffled.
It also happened once when I was downloading from the iTunes store, but is most prevalent with Safari.
We have wireless internet connected via ethernet to an Airport Express.
Any ideas? Thanks.
iMac G5 Mac OS X (10.4.10)

Hi Barry -
Yes I do live near a ghost town (kinda) - Virginia City, NV. And I did tell any unwanted visitors to leave.
Actually, in the last year, they have replaced the Super drive, power supply, inverter and logic board. The only reason I'm not thinking power issues is that it only happens when I'm in Safari or iTunes. I would use Firefox except I've got java issues with that. I can (and do) use the machine for other things all day long without problems. I can use Safari all day long as long as I'm not playing on Pogo or certain video sites. Maybe Pogo is haunted?
It also doesn't happen on my husband's iMac on the other side of the house. Is there something that could cause enough interference to actually make the machine shut down? Oh, the antennae for the satellite TV and internet are on the roof directly above me, if that would have anything to do with it.
Thanks for your help.

Computer shuts down when backing up

Hello,
I am using an iMac with Mountain Lion 10.8.3. My Apple Airport Extreme is about one year old (fully updated and current). I am on a DSL connection with AT&T. I am backing up to an external 1.5 TB hard drive (non-Apple brand). There is lots of room remaining on that drive (about 700GB).
All backups in the past have been smooth sailing with no problem.
What's happening now are two things (but one of them I think I fixed). At first, Time Machine would try to back up but it would never succeed because it would give a message that there is not enough space available in the drive (it was saying that it needed 10 more GB of free space). But I know that's wrong. I could not figure out how to fix that issue, so I erased the drive completely and started over. Now, I no longer get the "full" message and all appears to be going well----UNTIL......(see next paragraph).....
Now what happens is that it begins doing the backup process like normal (this would be the first/initial backup since I erased the drive and started over), however, once it gets about 100 GB or so (very rough estimate), the computer SHUTS DOWN. It turns itself OFF. No error window, no warning, no nothing----it just "POOF" turns off. To get it working again, I have to push the power button to turn it back on. There is no error message when I turn it back on.
I am copying (below) the two most recent Time Machine messages from last night from that neat widget/app that I think pondini invented. I sure hope this helps to diagnosis what is wrong, because I'm stumped.
The backup log that says "Automatic" is the first one that failed where it claimed there was not enough space to complete the backup. Once I erased the drive completely and started "fresh", that is what the second "Manual" backup is.
Friday, April 5th
Starting automatic backup
Backing up to: /Volumes/Time Machine/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Event store UUIDs don't match for volume: 2TB HD
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Deep event scan at path:/Volumes/2TB HD reason:must scan subdirs|new event db|
Finished scan
Found 433286 files (625.62 GB) needing backup
751.26 GB required (including padding), 741.14 GB available
Deleted backup /Volumes/Time Machine/Backups.backupdb/ScottPeavler’s iMac/2013-04-04-110906.inProgress/D11ECC13-2EB1-4975-A041-8EEA74F1339B containing 4 KB; 741.14 GB now available, 751.26 GB required
Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
Deleted 1 backups containing 4 KB total; 741.14 GB now available, 751.26 GB required
Backup date range was shortened: oldest backup is now Apr 5, 2013
Backup failed with error: Not enough available disk space on the target volume.
Friday, April 5th, 7:58PM
Starting manual backup
Backing up to: /Volumes/Time Machine/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 7267FE51-06B9-318F-80B2-EC5D94A925E2 eventDBUUID: DBDDEE41-0BFF-4DB0-AB1A-F7D152B9E065)
Forcing deep traversal on source: "2TB HD" (mount: '/Volumes/2TB HD' fsUUID: B4DDE136-9D38-302F-A81E-4645F23F6D09 eventDBUUID: B8E29F6D-A35B-4E34-B733-7C2983BD24D9)
Found 1331692 files (837.62 GB) needing backup
1.01 TB required (including padding), 1.49 TB available
Can anyone kindly help? Thanks!

Do a verify of the local disk. The sudden complete failure sounds like a hard disk or memory issue.
A5 http://pondini.org/TM/Troubleshooting.html
So the hard disk is plugged into the computer directly?? If not, then I think you should do it that way. Backup to Extreme USB drive is not reliable.
YOu don't have an error message for the manual backup.. and I am uncertain what the problem is.
Do a reset of Time Machine. A4.
And try again with the hard disk plugged into the computer directly.
You can look at other suggestions on the troubleshooting page.
eg http://pondini.org/TM/C4.html
But if you are doing it with the usb drive in the Airport Extreme please read this.
http://pondini.org/TM/Airport.html

My computer shuts down when I put it to sleep

Ever since I used some of those auto-download upgrades my Mac shuts down when I put it to sleep. What's wrong?

Hi gazebo, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Computer shuts down when calibrating

Hi.. I've been having problems when trying to run the Battery Calibration and the computer shuts off when it gets to the discharge part of the calibration. Seems to be when it hits the 15 to 20% part of the discharge. I'm using a Compaq Presario CQ56-219WM and running Windows 7 64 bit Home Premium. The battery calibration that I am talking about is when you first start the computer... press ESC to get menu and press F2 for Advanced Diagnostics then Battery Calibration. It checks to see if battery is there.. whether it is charged and charges if needed then goes into the drain battery part to find lower limit or 0% of the battery. It doesn't show any errors detected up to the part of discharging the battery and don't even show that the test was even run in the error log of the Advanced Diagnostic Menu. I've tried restoring the Bios to default values, uninstalling and reinstalling everything (programs and drivers), did a restore drive to original and updating everything and all is STILL the same. I've tried calibrating in Windows with the Support Assistant and all I get is the battery needs calibrated is this (after running calibration - waiting 3 hours plugged in and recalibrating:
Status (upper left hand corner): needs calibrating (20) and Charge capacity 51%
Over to the right side of the Screen: Failure ID - OK Design Capacity 4400 mAh Full Charge and Remaining Capacity: 2254 mAh Terminal Voltage: 12366mV Design Voltage: 10800 mV Cell Voltage1: 4148 mV Cell 2 voltage: 4125 mV Cell 3 Voltage: 4093 mV Status: E0 AC Power: True and a CT Number of 6BUED05BBZUE1G and showing a charge of 100%.
I realize the battery is getting old but all of this came on pretty much at the same time (short battery life and loss of calibration). I'm also running default values of HP Power Plan. Any ideas? Will a battery going bad cause all this? Why doesn't the Calibration when first booting the computer, shut down instead of doing the discharg/recharge thing... ? The power supply checks ok (checked with AC/DC meter).

is your notebook still in warranty? Warranty status check web page
It certainly seems by your description that the battery has issues.
Battery warranty is for one year, so it would be a good idea to replace it. Be sure that you buy a guaranteed compatible battery that comes with a one year warranty.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Computer shuts down when using Aperture

Similar Messages

Maybe you are looking for