Computer sleeps during Quicktime playback

When I watch video, my computer goes to sleep after the time I have alloted in my power management settings. This does not happen in VLC or Mplayer. I know that I am not moving my mouse but I am "doing something". This is on my Macmini PPC G4 and I have all the latest system and software installed.
thanks
1.83ghz macbook (mine) ibook 1.2ghz (wife) mac mini 1.42 (mp3 iphoto server)   Mac OS X (10.3.9)  

Hi, I can help a bit...
cmd+F will put the movie into fullscreen. If I leave my quicktime out of fullscreen mode, the screen saver will come on, but fullscreen fixes this.
If you're watching a low quality movie, you can open up Preferences (not the one that says, "Quicktime Preferences," press cmd+,) click the "Fullscreen" tab and change to desired size.
If all else fails, you can turn off sleeping entirely, or tape down a keyboard button or something
hope this helped
peace

Similar Messages

  • Sleeps during DVD playback

    Why does OS X.4 display go to sleep during Quicktime playback? It doesn't matter if I'm watching something through FrontRow, Quicktime, or the DVD player.
    Specifically, when my MacBook is on battery power, my display sleep comes on within a few minutes. It dims first and then sleeps a short time later. All this is normal behavior EXCEPT I don't want it to sleep while playing a DVD. If I'm watching a DVD, sleep mode should never happen.
    My other mac computers do the same thing but its less noticeable since the display sleep delay times are longer.
    What settings am I missing or perhaps this is a bug?

    I'm sorry my first post was too brief. I should have mentioned my settings before. I'm not a newbie looking for location of Energy Saver settings and I'm not quite sure why it should matter.
    What possible combination of settings would allow the computer or display to sleep during DVD or Quicktime playback?
    Settings for: Battery
    Optimization: Normal
    Reduce brightness for this power source- checked
    Reduce brightness before sleep- checked
    It will never sleep if the mouse is moving regardless of Energy Saver settings, right? Why should the display ever be put to sleep during playback of a DVD? It's like the OS never recognizes DVD & Quicktime video playback as actively using the computer.
    Questions:
    Does yours go to sleep during DVD playback?
    What settings are you using?
    I suspect this is an OS X.4 bug as I've caught one of my PPC macs going to screen-saver in the middle of playing a Quicktime movie clip.
    Thank-you for your help... I really appreciate it even if it sounds otherwise.

  • Os x 10.7.3 MacBook pro sleeps during iTunes playback

    Hi since updating to 10.7.3 my MacBook Pro seems to go to sleep during iTunes playback and apple tv viewing. I've changes the sleep setting to 3hrs andinstalled "jiggle" which doesn't seem to work and to be honest it doesn't seem right to a) have to install a 3rd party app to beat the system b) be good for the expensive device to remain on....
    Any suggestions as to what is wrong and what  I can do?

    Hi since updating to 10.7.3 my MacBook Pro seems to go to sleep during iTunes playback and apple tv viewing. I've changes the sleep setting to 3hrs andinstalled "jiggle" which doesn't seem to work and to be honest it doesn't seem right to a) have to install a 3rd party app to beat the system b) be good for the expensive device to remain on....
    Any suggestions as to what is wrong and what  I can do?

  • Computer sleeps during streaming video

    Bought this lovely second hand G5 and its great except it goes to sleep while watching streaming video online.
    I have tried watching videos from such sites as; YouTube, MySpace, CollegeHumor, ect. on both Safari and Firefox. Anywhere between 30 seconds to a minute into the video my computer puts itself into sleep mode.
    HELP! Suggestions?

    Hi LaPotter, and a warm welcome to the forums!
    Sounds like a Heat/Video card problem.
    Have you booted off the Install Disk by holding the *d key* down at boot-up, (not the c key), and run the extended Apple HW Test? Some Install disks require holding the Option key at bootup to select the AHT. Some Macs came with separate AHT CDs.
    Download & Install Temperature Monitor - 4.51...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19994
    Let's see if/what that tells us.
    Also, might check Console logs in Applications>Utilities>Console.

  • Screen sleeps during Media playback (With external monitor connected)

    Here's a weird one...
    With no external screen connected to my T410 I can watch the BBC iPlayer without the screen 'sleeping' after 5 minutes, which is perfect..... as I don't want the screen dimming and then going into power save mode while watching anything.
    However when I connect an external monitor, in Extended desktop mode, whenever I watch the iPlayer the screens shut down after 5 minutes.
    Im sure there's a setting but just cannot find it.
    Any help appreciated 
    T410(2537) -- i7 620M - Intel HD GPU (1440 x 900) - 8GB RAM - 128GB Crucial M4 SSD - 250GB Hitachi HDD - Windows 7 & 8 Pro

    Has anyone experimented with tip 2 (active corners)?  Perhaps it still works.
    http://www.cultofmac.com/176329/turn-off-internal-lcd-display-of-your-macbook-ai r-os-x-tips/
    Κοσμά τι λες; Τα έχεις μπερδέψει. Άλλο συζητάμε εδώ. Το ότι δεν μπορείς πια να δουλεύεις μόνο με την εξωτερική οθόνη (να έχεις σβηστή την ενσωματωμένη οθόνη όταν έχεις συνδεμένη εξωτερική).

  • ITunes 11.1.3 issues - freezing during audio playback.

    Like many other folks on here, I'm having some playback issues with iTunes 11.1.3.
    Macbook (couple years old) 2.4 mhz 2 core- 4 gigs ram
    We use this computer primarily for music playback for dance classes and performances. Have run dozens of shows over the last year or so with zero issues.
    There *might* be a better playback software option, but iTunes doesn't get in the way with too many options, has (up until now) been rock solid, and has never let us down, and is less prone to user error causing huge WHOOPS during something important.
    That is, until 11.1.3. Didn't really notice any issues at first, but wife came home from a dress rehearsal Wednesday evening and complained - "it froze a couple of times while playing back Act 1. What's wrong with my computer?". (Act 1 - approx 50 minutes of music - 40ish total cuts).
    I looked at it - she had a ton of other stuff running - mail - wifi - DVDPlayer - iPhoto - you name it. I figured that was the problem, shut all the other stuff off, and figured it was solved.
    Nope - I'm running audio during our final tech rehearsal this evening before performances start in the morning.
    35 or 40 minutes in - froze again during a track.
    It just stopped - buttons became unresponsive - beachball came up - we waited a minute - and then it freaked out while trying to catch up with anything I had pressed, skipped around a bit, then resumed acting normal again.
    Took a short break - checked nothing else was running that didn't need to be and made some adjustments:
    Wifi off
    Cloud off
    Check downloads, sync, podcasts ... all off.
    Reset all warnings. Reset cache ( which took a surprising amount of time)
    Match and Genius, off
    Opened Acitvity Monitor and stopped any processes that were not essential
    Reboot ....
    Another 30 or 40 minutes later - froze again.
    Luckily, the lighting guy had a PC laptop with him. I quickly authorized his computer, transferred everything, and the rest of the evening went without a glitch.
    Not sure what to do next. I'm pretty sure it's NOT the computer.
    Disk checks OK. All hardware test are OK.
    Couple of observations:
    1. If I repair permissions - it finds a TON of messed up (?) iTunes permissions and fixes them. One day later, it find just as many again. What's up with that?
    2. If I watch disk access in the Actiity monitor during playback - on occassion there's a WRITE spike. Odd. What's it writing? This is with NOTHING ELSE running but iTunes, which didn't glitch during the spike, but still, what's that? A contributing factor? A clue?
    3. CPU and memory use looked OK. Haven't managed to get it to glitch again while I'm actually watching this though.
    Between what I've tried, and what I've read here, I'm pretty convinced our Macbook isn't at fault here. I'm pretty sure there's a problem with 11.1.3
    If anybody has other observations or suggestions, I'l love to hear them.

    Are these recent releases?
    I had troubles right after iTunes 10 came out because Digital copies were misreading "10" as "1" since the version check script was only looking for a single digit version number. Newer releases shouldn't have this, but if it's more than two years old, it might do this.

  • Waking from computer sleep

    Since FX takes some time to load, I would like to start my demonstration in my office then put my portable into Sleep mode (this is computer sleep, not Java thread sleep) so that it is instantly available at the customer's premises.
    However, all I get initially is a black square where my display should be. Eventually I can get it back but it hasn,t been working properly during sleep.
    Any ideas on how I protect the program during sleep and awaken it when the computer runs again. I am running it as a desktop application.
    Thanks
    ABG

    Not likely it is apps checking for updates. I have a bunch doing that and they don't wake from sleep.
    More likely hardware connection, USB device or some such.
    *Various causes of sleep issues in Macs*
    [Post by Dale Weisshaar|http://discussions.apple.com/message.jspa?messageID=8980488] - general post on sleep issues.
    [Post by J D McIninch|http://discussions.apple.com/message.jspa?messageID=8767819] - computer turns on automatically during sleep
    [Logitech keyboard drivers out of date after updates|http://discussions.apple.com/message.jspa?messageID=8999415]
    [Try safe boot, then rebooting normally|http://discussions.apple.com/thread.jspa?threadID=1906841&tstart=0]
    [Mac OS X: Why your Mac might not sleep or stay in sleep mode|http://support.apple.com/kb/HT1776]
    [A long list of sleep issue reports and comments|http://www.macintouch.com/readerreports/macosx10_4tiger/topic3083.html ]
    Check if third party USB devices or cards are causing problems.

  • TS2972 Apple tv sleeps when computer sleeps. What to do

    The TV disconnects from Apple TV sharing when computer sleeps. What to do?

    George, Your trouble sounds just like mine. You can read my thread here: https://discussions.apple.com/thread/4204561?start=0&tstart=0, but in summary:
    Itunes and the Apple TV exchange messages about once per minute. If any wifi interference stops the message-and-reply, iTunes closes the home sharing connection.  Other services are usually fine.
    I solved my problems by wiring the ATV and computer. (Wiring either alone didn't work.)  Home Sharing is now rock solid and works exactly as advertised. No drop-outs during play. The iTunes library is always available on ATV - I never have to restart home sharing or iTunes or the ATV. If a computer or ATV restarts, they pair up automatically.
    Not everyone can wire, I know. But it worked for me. Test it if you can.
    John

  • My computer froze during match initial formatting.  Now some songs are uploaded others are "greyed out."  If I go song by song, I can update match.  How can I do this all at once and also update album art?

    My computer froze during match initial formatting.  Now some songs are uploaded others are "greyed out."  If I go song by song, I can update match.  How can I do this all at once and also update album art?

    Hi gdogk,
    If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
    If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
    Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
    Turn iTunes Match on by selecting Store > Turn On iTunes Match.
    Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
    Turn iTunes Match on by selecting Store > Turn On iTunes Match.
    How to troubleshoot iTunes Match - Apple Support
    Regards,
    - Brenden

  • MBP 2010 goes to sleep during login

    I cannot boot up by MBP. It starts with the gray screen and the apple. The baton spins around a while, then the display goes to black, not suddenly, but a quick fade. Sometimes it then comes up again with the gray screen and the cursor in the corner. But then it goes back to black.
    The computer is unresponsive - caps lock does not respond. Looks like it is asleep - white light is pulsing, battery meter shows full, charger is charging.
    I have hard shut the computer many times. Occasionally, it will show a flash of a screen before shutting, and the screen is the waking from hibernation, like when you wake the computer after the battery is low and the computer shuts down by itself. But it is fleeting and the battery meter shows fully charged.
    I have a feeling therefore that it is going to sleep during the login process.
    I have tried PRAM and SRC reset - no change.
    I have tried to boot in safe mode, and it also goes to the black screen.

    Hey Frederic
    The next step is to boot to your install disk or Recovery Disk and use Disk Utility to verify the Disk. After that the next step would be to reinstall the operating system.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    OS X: About OS X Recovery
    http://support.apple.com/kb/HT4718
    OS X Mountain Lion: Reinstall OS X
    http://support.apple.com/kb/PH10763
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Having random crashes during audio playback.

    Greetings,
    I seem to be having some issues with crashing during audio playback.  Here are my specs:
    MSI K8N Neo2 Plat  (1.B BIOS)
    AMD Athlon 64 3500+ (Winchester)
    4x512 Corsair TWINX 1024 3200C2PT (Bought at seperate times, but revisions are almost exact and they run stable)
    NVIDIA GeForce 6800
    Creative Audigy 2 ZS
    Forton Source FSP 400W
    It seems to do the same thing every time.  The audio will start skipping (in more than 1 media player) and after no BSOD, the computer will reboot itself.  I have it set to show a BSOD as well.  It has even started to ask to check my D: drive for errors after this.
    The problem first started to occur after a couple of things.  I recently updated my bios to the 1.B version as stated.  And a week or so ago I did a fresh install of Windows.  The sound was working fine with the new BIOS, but now with the new Windows install it has had issues.  Are there any known issues with the Audigy2 ZS and the new 1.B BIOS that I just didn't experience before?  Granted, I did not have my old install of Windows long under the new 1.B BIOS.
    At this moment I am using the AC97 onboard audio to see if that crashes as well, and just to hopefully have the random crashes stop happening.  I know there are quite a few avenues to take, I am just looking for opinions on which would be the best one.  Reflash the bios to an older version?  Try the Audigy2 in a different PCI slot? (I had it in the 2nd to bottom as the NIC is plugged into the orange PCI)  Contact Creative for an RMA or repair of the card?  I only bought it on December 16th, so it's fairly new.  Something else I am maybe missing?  A BIOS or Windows setting?
    Any help on this would be greatly appreciated.  If I need to provide any more info, please say so and I will promptly.
    Thanks.

    I have the same MB and CPU but I am using the onboard sound and have not had any problems with that.
    I can recommand that you bump up your memory voltage to 2.6~2.7 and loosen up your memory timings to something like 2.5-5-5-8-2T.
    Then remove all drivers from your Audigy, disable your onboard sound and remove those drivers, shut down and install your Audigy and boot up allowing Windows to find your new hardware and then install the drivers.

  • Quicktime playback is terrible

    My quicktime playback is terrible. I have quicktime v7.4.5(v25). The picture is unclear, pixelated, and very choppy. I am trying to play videos from my Kodak digital camera and streaming videos. I tried downloading flip4mac and VLC. I got nothing from these. Maybe this computer just doesn't have enough juice. If anyone can help at all please let me know. I am on the edge of buying a PC and going back to windows.

    Yeah just check out www.forum-snowboards.com. Their homepage has a video playing in the background and my computer plays it in clips like a slideshow. The other videos are from my Kodak digital camera that are about 10MB, 20 seconds long, and 640x480.

  • No audio during fast playback.

    FCP stopped playing audio during fast playback. The audio plays fine while playback is at normal speed, but once I speed it up the playback is silent. Other people use this computer, so they might have changed a setting that I am unaware of. Help is appreciated.
    Jens

    Turn on Scrubbing in the view menu...
    Jerry

  • Plantronics Voyager 855 unable to lower volume during iPod playback

    I wasn't sure if this should be in 3GS or music and video, so I figured I would pick one.
    I have a 3GS 32gb running version 3.1. The problem I have is during iPod playback. My Voyager 855 locks the volume slider on the phone at half way. Using the volume control ON THE HEADSET, I can increase the volume and see the volume slider on the phone increase correspondingly up to the point that the music is very loud. But, when I try to turn the music down, again using the volume controls ON THE HEADSET, the slider on the phone will only go down to the halfway point. I can continue to click the volume down button ON THE HEADSET and the button will beep along with a split second decrease in volume but as soon as the button is released the volume has not changed-it remains at the halfway point. I have this problem with watching youtube videos, everything, EXCEPT for on the rainfall app that I have. I can increase/decrease the volume all the way up or down to the point that I can no longer hear the rain or until it is so loud it hurts my ears. This is very frustrating as I would really like to use this headset while reading and for sleeping, but the iPod function is just too loud. My friend has a 3G 8gb with the exact same headset and he does not have this problem. Is this a feature/limitation of the 3GS?

    Yeah, ha ha, that is my post to Plantronics and their reply to me. I tried what you suggested and no go:
    Un pairing, rebooting, and re pairing did not result in a fix. I still have the same problem. I tried it on my wifes phone-hers is running 3.1.3, and no-go, it had the same problem.
    The volume slider works when the music is not outputed through the headset. When through the iPhone speaker, it works as it should-the volume is able to be adjusted up and down via the slider. Videos behave as they should, any program that needs to be adjusted via the volume slider or the rocker button on the side of the phone works as it should. To expand on what I stated eariler: while using the iPod function I can set the slider all the way to the left (volume 0), press the option for output and set it to the headset. When I do that, there is a split second where you can see the slider move from the left to the middle, and then the slider disappears. It's almost as though the headset is resetting the default/baseline sound level from 0 to 50 (if we are working on a 0-100 scale). I can increase the volume using the buttons on the headset, and I can lower the volume only to half way. If I then select the option for sound output and change it back to speaker, the slider reappears, and it is all the way to the left where I originally set it. This is very frustrating. I can understand Plantronics response. but they are wrong. I can control the loudness of music via the iPod application. I guess maybe this is just a hiccup I will have to deal with. I have placed a request to Apple that they fix this. Maybe in the next upgrade they will, or at least add an option where you can adjust it in the settings.

  • N70-ME, scree flicker during music playback

    Hi,
    I noticed that the screen flickers (with some white banding lasting few milliseconds, every few seconds) during music playback (128kbps AAC). Is it because the processor is too slow, or is there a known software glitch ?
    thanks,
    bd

    Is this happening in iTunes or on the iPod?
    If iTunes, can you open the same song in QuickTime and does it pop and click also?
    I don't know the apple contact stuff, it's posted around here somewhere though.

Maybe you are looking for

  • MIRO--CENVAT CLEARING ACCT NOT APPEARING.

    Hi All, In PO ,we are maintaining only JIPC ( cst ) for a tax code, But while GR we are capturing excise( cenavtable), now while doing MIRO cenvat clearing acct is not appearing when we simulate. Is it prerequisit to maintain excise condition in PO s

  • CS2- CS3 Observer questions.

    Hello. Im porting a plugin from CS2 to CS3 on MAC and have run into a problem with the observer structure. In the CS2 plugin we simply used the default values available, IID_IUNKOWN & IID_IOBSERVER... i IsAttached (IObserver *observer, const PMIID &i

  • Problem using datasource in netbeans to get connection

    The method initialContext.lookup("java:comp/env/myDatabase"); generated the following exception javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application reso

  • Unable to do expdp on NFS mount point in solaris Oracle db 10g

    Dear folks, I am facing a wierd issue while doing expdp with NFS mount point. Kindly help me on this. =============== expdp system/manager directory=exp_dumps dumpfile=u2dw.dmp schemas=u2dwExport: Release 10.2.0.4.0 - 64bit Production on Wednesday, 3

  • Missing agent, trap,security tabs in snmp service tab!

    Missing agent, trap,security tabs in snmp service tab after installing snmp from powershell script!! I run the script on win server 2008 and 2012 Could someone  help.. Thanks for the help in advance Ashwini