Computer starts but freeze
when I start I get a message: Panic (cpu O caller 0X003AB787) unable to find driver for this platform "ACPI"
I tried to reboot W/install disc but wont excecute? I tested the hardware and had no problem response? How do I get it started? Thanks
I see you've put Windoze XP I'll give you answer for osx, try running and quitting garageband.
I had this problem and it worked for me, don't know why!
Found the answer after downloading Audacity and it trashed my sounds! So thanks to poster on their forums.
Nick
imac 20 g5 Mac OS X (10.4.6)
Similar Messages
-
My computer starts but then immediately shuts down
Computer starts but quickly shuts down.
could be a broken cpu fan
if it's not spinning then the system would shutdown to avoid getting overheatet and die -
I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen
Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy -
G4 starts but freezes while trying to load
My G4 has been acting strangely lately - occasionally when I boot up, nothing lights up. Then, a few weeks ago, I booted up and it said the computer could not load. These were both temporary occurences... but last night I rebooted my computer after it crashed, and now it only loads so far as the Mac OX loading page, and freezes right at the very beginning of loading. I've tried this several times and nothing has changed. Can anyone please help me here? Is this a typical problem, and one that can be fixed?
here is a couple of links to look at which might help. http://www.thexlab.com/faqs/startupitems.html http://www.macfixit.com/ http://docs.info.apple.com/article.html?artnum=2238
-
My computer starts but shuts down
my computer will turn on and the apple will appear but I will turn off, last time I did was re-start it
Hey Silvia,
Welcome to Apple Support Communities.
The article linked below provides resolutions for startup issues, like the gray screen with an Apple logo issue that you described. Try following along with it and just reply reply if you run into any issues.
Mac OS X: Gray screen appears during startup
I hope this helps.
-Jason -
MacBook tries to start but freezes over and over again
Tried to start it but it freezes so I have to start again. Gets half way started, and then freezes.
Reinstall OS X. What version are your using?
-
Solaris installer starts but freezes
Hi,
I am trying to install solaris 10 on my ultra 5 system. I downloaded the isos burned them and booted my ultra with boot cdrom . The installer starts, prints a copyright message from sun and after a while freezes. Boot cdrom -v showed me that it does a probe for my hardware and after it detects the processor it stops . I can stop-a so the machine didnt freeze.
i Tryed different cdrom units or burning the cd1 iso to lower speeds (4x was teh lowest) but still nothing.
My ultra has 64mb ram.
Any help would be apreciated.
Regards,i'm having the same problem.. any help would be greatly appreciated
-
Computer Starting, but no display/keyboard/mouse, but work after CMOS clear
I have an MSI Z77A-G45 motherboard, intel i5-3570K CPU, 16 GB of ram, a Sapphire Radeon HD 7850 GPU, XFX PRO650W Core Edition PSU, and am using a 550 VA UPS.
My computer powers up with no posts, all CPU indicator lights are lit, and the display, mouse, and keyboard get no signal, but when I read some posts about solving this problem I cleared my CMOS with the button on the back, and when the computer powers back up signal is sent to my monitor, mouse and keyboard, but upon continuing or running setup the previous behavior continues.
Help would be appreciated!I ain't really be able to help you. The only two things i could think of are an empty battery or a faulty board. But for that matter wait for others to answer your post.
But what you are describing sounds like what i experienced five years ago, when i set up a new system with a MSI P35 Neo3-F. I fortunatly bought board, cpu and RAM from the same vendor. Same as you i had to reset CMOS in order to do anything useful with that computer. I think i had to reset everytime i turned on the pc, but not for reboots. Althoug i'm not sure about that.
Besides that i had occasional failures in Windows which is why i did run MemTest86+ from CD. I got some faulty memory addresses in that run and thought the RAM were to blame, but in further passes of memtest i got different addresses. This i mailed to the vendor and i told him, that i'd had no means of figuring out, if the board, the cpu or the RAM was faulty. They told me to send in those three to figure it out themselfs and to give a replacement for the broken one, which turned out to be the mainboard.
After that i still got failures - can't remember what failures - and could make out that the cpu wasn't working correctly. I still believe the broken board did some damage to the cpu sometime i tried to start the PC without resetting the CMOS while maybe having random values in CMOS.
I cannot say that this is fact, but for the vendor it was reasonable enough to also replace the cpu and since then i'm quite cautious when it's about a board that might be trying with random CMOS content.
I don't want to frighten you. I just want to say don't try to much without resetting the CMOS as long as it needs to be resetted all the time.
At least til someone can ensure, that my interpretation of my experience must be wrong.
Greetings,
Micha. -
Download starts but freezes up at around 20%
No matter what I do the download keeps freezing up in the same spot. I've run as admin, rebooted, cleared cache but it still stops at the same point. yes, i've tried saving to desktop and the default, didn't work. I'd download it on my mac but it only will download the mac version. I wish there was a direct link and not this download manager. anyone find what worked for them? thanks.
trying to download cs6 web premium using windows 7 64bitPlease try initiating a direct download by utilizing the steps listed in http://forums.adobe.com/thread/981369.
-
Computer starts but doesn'tt go past progress bar
As the title says. Heres the story: the day before it broke, i was watching the simspons for several days. No internet activity whatsoever. After shutting down simpsons, computer died. Then couple days after it died, i replugged it and worked just fine. I thought i would shut it completely down to kind of refresh everything and on reboot was that creepy white screen with progress bar. Once progress bar is done it shuts off. Doesnt go past.
When i start+option key, I was able to get the disk utility. Scan says all files are ok. Then i went to re-install mavericks.
Cant re-install is says my hard drive is locked.
The guy on the phone mentioned a hard drive failure.
Im a noob with macs i dont know sh-t.
I want to know alternatives to getting a costly diagnostic+semi costly new hard drive.I believe it is enabled. Now it says rhis when i try to repair the 500gb Toshiba thing:
"The partition map needs to he repaired because there's a problem with the EFI system partition's file system"
What is efi or a partition map? -
How do I restore my personal items such as iTunes, my pictures, email etc...? The computer was acting up last week, and now everything looks like factory settings.
Hello, first thing to do is in the Finder, double click on your hard drive's icon, see how many users are in the Users folder, sounds like your Home folder was possibly renamed.
-
Hello all.. I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box. I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state? Sorry for the long question. Hopefully one of you clever people can help. SimonClntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ? -
I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?
Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.
-
i've jail break Iphone 3GS. i tried to restore setting (erasing all data and media) without connecting to computer/itunes. When it starts it freezes by showing apple logo only. what is the solution. please help me out. Here i don't have iphone service center too.
Although not illegal, Apple discourages a user from modifying the iPhone OS in any manner, including "jailbreaking". Apple feels so strongly about this that discussing methods to assist a user trying to either jailbreak or "unjailbreak" an iPhone are prohibited.
-
InDesign CS4 Mac starts but then freezes
Indesign CS4 Mac starts up but freezes from there. Trying to open files or create new ones results in the filename appearing at the bottom of the Window drop-down menu, but the file doesnt appear on-screen.
The same result occurs when opening files using "Open Recent File" as well as double-clicking the file in Finder or using "Open With" in FInder.
It couldnt have picked a worse time to crap out - right in the middle of an urgent contract!! Dang Cleetus!!
Any suggestions - apart from re-installing the program?
Cheers,
JohnTried renaming InDesign Saved data and InDesign Defaults and restarting InDesign - that didnt seem to fix the problem - after re-starting InDesign it seemed the program didnt write new versions of the files on re-start.
Will head back to the office & connect to my 23" display & see if ID works OK with that - that would confirm that it's a screen pointing issue?
Would re-installing ID help?
Cheers,
John
Maybe you are looking for
-
ICloud with multiple devices sharing 1 itunes PC
We have a number of apple devices, some ipod nanos, 3 ipod touches, and an iphone. All share itunes on one PC for music, videos, apps etc. The ipods and iphone now have the iCloud option from IOS5. I get the general idea of iCloud sharing the info of
-
Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks. I am a new user with mountain lion.
-
How can I get rid of the dark area on top one third of my iphone screen which spoils my background image? It seems this problem is caused by the software to increase the readibility of upper letters (clock battery etc.) It be nice to leave us the con
-
LabVIEW 2011 file selection fails to fill in the file name into the "File name:" field
In LV2011 I am selecting a text file while my code is running. The "file name:" field is not populated with the selected file name. This is inconvenient, especially if I want to modify a file name by one or some few characters. How do i make LV 2011
-
When opening a previously saved png. file how do you show its layers?
I was trying to save a large file as a Photoshop PDF and my program crashed. I was lucky enough to have saved this file in both a JPEG and PNG format onto my desktop but now once I move the files back into Elements, I have no history and no layers?