Computer Startup issue, please help!
My Toshiba Laptop was working fine in the morning, all I did in the morning was check my email. After coming from school, I checked it and it automatically went to the startup repair. After it was done checking, I started it up AGAIN! Happened a million times. I tried f8 options, I tried ALL of them and it didn't work. They just also went to the startup repair again. Safe mode doesn't work. The repair option, only Startup repair is available, the memory diagnose etc doesn't shop up. I have no money to let someone help, please help!!!!
What happens when you select Safe Mode?
- Peter
Similar Messages
-
Option key can't function to access start up manager, so i can't choose startup disk. please help me
option key can't function to access start up manager, so i can't choose startup disk. please help me
If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
-
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
Cannot create JAVA on new computer...please help
I have not been able to actually view anything I create with Java on my new computer. I have tried installing the latest update of Java but it didn't help. Sun Java was already installed on this computer.
I use Front Page to create web sites and have never had a problem before.
When I create a Java effect, I can see the Java Icon in normal view but as soon as I try to preview... nothing shows up.
The Java effects i created on my other computer show up on this computer...
please help ...Thank you for your response but this doesn't help.This is a forum for Programming in Java. Your question appears to be targeted at something else, Digital Video maybe? Possibly Applets? We don't know, and you aren't giving enough information to make a decent guess. If you have a Java code development-related question this would be the place to post that.
Perhaps you want a Microsoft Forum?
Good Luck
Lee -
recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH
Why can't you update your computer operating system ("desktop software")? What software would that be?
-
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
SamitHi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D -
Headerrenderer issue -Please help
Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know -
Hi, ihave problem that i can't find app store in my computer can you please help me?
hi, ihave problem that i can't find app store in my computer can you please help me?
alikhandro wrote:
thank you, but the problem is when i tried to install 10.6.6 always find update and can't install it he asked me for 10.6, can you please help with the direct link that i can install 10.6
Check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase and Install Snow Leopard Disc,
Mac OS X 10.6 Snow Leopard -
I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.
You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.
-
Computer keeps freezing on startup.. please help
So when ever i start up my toshiba laptop windows 8.1 it keeps freezing when ever i load my browser nothing loads when i try to refresh the desktop the mouse cursor just keeps loading and then it just freezes i cant do nothing and then i have to shut it down holding the power button down and sometimes when i on it again it freezes aswell
My model is Satellite S50D-A
Serial Number XXXXXXXXX
Part Number PSKKWC-00G005
Can anyone please help me
[Moderator edit to remove serial number.]I can't seem t find your model in the Toshiba US support site.
However, usually, you tap the F8 key while powering up and it brings you into the Start Up recovery menu.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit -
Weird Screen Issue, Please help
Ok I have had my iBook G4 since Dec. 28, 2005 and until today everything was going just fine....
Well this morning I went to wake it up to check my email and wham, the screen was all dark, I could see a faint image of my desktop, but barely visible. So I tried to wake it up, moved the mouse, tried the trackpad, spacebar and nothing worked, so I restarted. Then about an hour ago it did it again, and I had been using it about 15 mins before that. Only restarting remedied the problem, although the screen was dark until the apple apeard with the light blue screen behind it.
Does anyone know what could be causing this or how to fix it, I've heard my friend say she has this prob with her Powerbook, would it be the same issue??
Please help!!!
iBook G4 14" Mac OS X (10.4.2) iPod Nano (white) Roland GX-24 plotterHi Anch66,
Welcome to Apple Discussions
Do you have an d to be able to hook your iBook G4 up to a external monitor? You may want to try starting up in Safe Mode (<a href="<a href="http://docs.info.apple.com/article.html?artnum=107393">Knowledge Base Document #107393 on How to Startup In Safe Mode). It is a stretch, but it may work. Do you have anything connected to your iBook? Do you have it plugged in? Have you recently installed or updated any software on your computer? You may want to bring it to your local Apple Store/Reseller.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight.. -
Join with count() issue, please help!
Hello All,
I have this (probably really simple) issue that I cannot seem to resolve...I have 2 tables here (tbl_system_engineer and tbl_task_request)...(only relevant columns are listed below)
tbl_system_engineer
- id NUMBER
- full_name VARCHAR2
tbl_task_request
- tr_number NUMBER
- submitted_on_date DATE (date task was submitted)
- ass_comp_date DATE (date task is due)
- closed_date DATE (date task was officially closed)
- requestor NUMBER (the system engineer id, the person who created this task)
The query is supposed to summarize how many of the system engineers tasks are as followed:
- "past completion date" - how many tasks have tbl_task_request.closed_date > tbl_task_request.ass_comp_date OR SYSDATE > tbl_task_request.ass_comp_date for the engineer
- "Approaching Completion Date" - how many tasks have a tbl_task_request.ass_comp_date in this month but not "past completion date" for the engineer
- "On Schedule" - how many tasks have a tbl_task_request.ass_comp_date > the end of SYSDATE month and year
The result set rows are supposed to look like...
"System Engineer full name", past completion date count, approaching completion date count, on schedule count
Please help!Hi,
Welcome to the forum!
That's an example of a Pivot , where you want to GROUP BY a combination of columns, and have some of the columns appear as different columns, not different rows.
The way to do that is to GROUP BY the expression(s) for which you want rows, and use CASE expressions for the others.
For example:
SELECT e.full_name
, COUNT ( CASE
WHEN r.closed_date > r.xyz_comp_date
OR SYSDATE > r.xyz_comp_date
THEN 1
END
) AS overdue
, COUNT ( CASE
WHEN xyz.comp_date < ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
, 1
AND r.closed_date <= r.xyz_comp_date
AND SYSDATE <= r.xyz_comp_date
THEN 1
END
) AS approaching
, COUNT ( CASE
WHEN xyz.comp_date >= ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
, 1
THEN 1
END
) AS on_schedule
FROM tbl_system_engineer e
JOIN tble_task_request r ON r.requestor = e.id
GROUP BY e.full_name
;I don't have versions of your tables, so I can't actually test this. I suspect that some consideration for NULLs needs to be added to the CASE conditions.
if you post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) then people can test their ideas.
Sometimes, especially when the columns are mutually exclusive, it's simpler to calculate a value in a sub-query, telling with which column of output each row is associated. That computed value is then used in very simple CASE expressions in the main query,
Among the annoying features of this site is ithat ir replaces what it thinks are naughty words with s. I suspect that happend in your post. I assume all the columns with ** are the same, for which I substituted above. -
Hello, this is my first post.
Well lately I've been experiencing some connection issues with my iPhone 5s. I was on my iPhone just watching Youtube when my iPhone 5s disconnected, I tried to connect again by going to settings> Wi-FI> and then select my network as usual, but the weird thing is that my Wi-Fi network has changed it's name to Wireless, it used to be Wireless710. Also the password has been changed.
My computer can easily connect due to the fact that it is hardwired to the Wireless Cable Modem Gateway.
Extra Info:
Carrier is Sprint.
I am using Windows 7 Ultimate.
My Wireless Cable Modem Gateway is Netgear.
And now I am confused because when I open the small tab with the computer and a plug on the bottom right corner next to the speaker icon it says I'm not connected :/?! Here is a picture of it:
Note that I can not connect to it but am connected on my computer. It just disappeared on my phone and computer, I even unplugged my router waited for 20 seconds and connected it back in. Did it wok? for my computer yes again because it is hardwired, but my phone? No. Wireless 710 still won't show up. Is this a possible hack? Please help me as much as you all can, thank you very much.Log in to the router's console with a web browser from your computer. What kind of encryption did you have on the router? If it was WEP that's about as secure as no encryption. It should be WPA or WPA2. There has been an exploit reported in Netgear and Linksys routers that allows someone connected to the router if Remote Access to the console is enabled to take it over and install spyware on it.
Is it your router, or the cable providers? If it is yours it has been hacked. If it belongs to the cable provider they may have changed it to make it more secure. Call them.
And if it has been hacked and is yours the best thing to do is to throw it away and get a new, more secure router. Or you can try reflashing the firmware by going to Netgear's site and downloading a clean copy. -
B575: Microsoft Visual C++ Runtime Library Error on Startup? Please Help!
This came out of the blue, I just started up my laptop and out of no where my Windows 7 Ultimate transperancy graphics are gone and I can't connect to the internet! I get this message on startup saying 'Microsoft Visual C++ Runtime Library Error', for controlhandler.cpp and I have no clue what it is! I tried a clean boot and safemode boot, and it is the same thing! Please help
Solved!
Go to Solution.hi ironmax,
As a last resort, you can:
1. Press the One Key Recovery button to restore the unit from factory settings or
2. Create a recovery disc and use this disc to restore the system from factory
Note:
Backup important before doing a factory reset
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
ORA-01940: cannot drop a connected user... No entries in v$session.
Hi DBAs, Its on Linux Ubuntu... I want to drop a user. Getting error as below. When I check for connected sessions, I find no entries in v$session. Any other alternative? Please help!!! EGOVDBA@qadb> select * from v$version; BANNER Oracle Database 10
-
HT1918 How to change my sercurity question if I forgot the answers to them?
How to change security questions if I forgot the answers to them?
-
Imac 27" - installed Snow Leopard from macbook pro - just get grey apple
I have a friends imac he bought second hand and it starts okay but the mouse moves but the click is unresponsive. I wiped it via firewire target mode and installed snow leopard.... all that happens is I get as far as the grey apple screen.... I check
-
Best approach to posting to FB60: Use BAPI_ACC_DOCUMENT_POST or BDC?
Good day, everyone. I need to develop an ABAP processing program to read an inbound file of non-PO-related invoices and post them to t-code FB60. I've spent the past day doing a lot of researching, and it looks like the two most mentioned methods I'
-
Morning All I have a situation where I have a standard selection screen displaying an ALV grid. The user can then double click a line to see a drill down ALV. My error occurs if the user executes the program multiple times i.e. displaying the grid