Computer startup issues

hi i was wondering if anyone knew why during my computers startup i dont hear the apple startup song? help please much appreciated, im also getting an error message once it turns on but its only on for about half a second so its impossible to read what it says.
thanks

hi i was wondering if anyone knew why during my computers startup i dont hear the apple startup song? help please much appreciated, im also getting an error message once it turns on but its only on for about half a second so its impossible to read what it says.
thanks

Similar Messages

  • Computer Startup issue, please help!

    My Toshiba Laptop was working fine in the morning, all I did in the morning was check my email. After coming from school, I checked it and it automatically went to the startup repair. After it was done checking, I started it up AGAIN! Happened a million times. I tried f8 options, I tried ALL of them and it didn't work. They just also went to the startup repair again. Safe mode doesn't work. The repair option, only Startup repair is available, the memory diagnose etc doesn't shop up. I have no money to let someone help, please help!!!!

    What happens when you select Safe Mode?
    - Peter

  • Group Policy - Computer Startup Scripts - Add/Set Default printer

    Good Morning.
    Let's say we have 2 offices, A and B, and only 1 user.  The user is using Roaming Profiles.  Each office has its own printer.
    What I am trying to do, is make a Startup script that is specific to the COMPUTER being logged into so when any user logs into that computer, they get the printer in that office defined and set as default.
    I am able to do this successfully with my script but ONLY if i have the script be on the USER side of GP (i.e. in the Logon script section)
    That is great that that is working however, when my user goes to Office B, they still get mapped to Office A's printer if I use that method.
    So I figured I could just modify my GP and run the same script from the STARTUP section of the computer, rather than the LOGON section of the user.  It does not work.
    Here is my script:
    Set WRFCUNetwork = CreateObject("Wscript.Network")
    PrinterPath = "\\fileserver\MAINTELLER"
    PrinterDriver = "PrinterDriver"
    WRFCUNetwork.AddWindowsPrinterConnection PrinterPath, PrinterDriver
    WRFCUNetwork.SetDefaultPrinter "\\fileserver\MAINTELLER"
    This is where I Have the script placed:
         Computer Configuration -> Windows Settings -> Scripts(Startup/Shutdown)
    Once i'm in there, I double click Startup, click Add, and select my script which is named:
         MainPrinterSetup.vbs
    I have this GP applied to ONE OU, and that OU has ONE computer in it (my test computer)
    I login with a brand new user called "testuser" (creative, huh?) and basically nothing happens
    except they log in and have some Microsoft Document Image Writer printer set as default (which by the way sure does slow the PC down to the point of it almost being broke if anyone actually tries to print to that by accident)
    No Main Teller Printer, no anything.
    The strangest part about this is, if i apply this script to the user LOGON scripts, it works fine, the printer is there, and is set as default. (but see above why that wont work for my situation)
    So obviously the script works fine, but I guess i'm missing something when it comes to applying GP's to Computers rather than Users.
    Can anyone shed some light as to why the script is not running (i'm guessing the script isn't even attempting to run, rather than failing, but i have no way to know that)
    Thank you in advance!!
    Derek Conlon
    Network Administrator
    WRFCU
    EDIT:  Here are the PC's info that i'm working on:
         Server:  Windows Server 2003 Standard Edition (where my GP's are created and managed with AD)
         Target PC:  Windows XP Professional SP3
    EDIT #2:  I manually navigated to the Script file after logging in and "opened" it and it added and set the default printer no problem.  the issue is definately with the script running at startup.

    I wanted to clarify a few things:
    1. While it is true that printer connections are usually per user, it is definitely possible to create "global printers".  There are a number of ways to do this, but two methods that come to mind are using:
    a. "Rundll32 printui.dll,PrintUIEntry" option with the "/ga" switch.  The "/ga" switch is the key here since it allows you to deploy printers "per machine" instead of "per user".  More information
    about this is available at:
    http://members.shaw.ca/bsanders/NetPrinterAllUsers.htm
    http://technet.microsoft.com/en-us/library/ee624057%28WS.10%29.aspx
    http://www.computerperformance.co.uk/Logon/logon_printer_computer.htm
    http://www.robvanderwoude.com/2kprintcontrol.php
    b. The Print Management console that is available in Windows 2003 R2 and higher can help you deploy printers "per machine" in addition to "per user".  More information about this is available at:
    http://www.czsolution.com/print-management/print-management/print-management-console.htm#DeployingPrintersByGroupPolicy
    http://technet.microsoft.com/en-us/library/cc753109%28WS.10%29.aspx
    2. As Guy mentioned, Group Policy Preferences can help set the default printer.  But there is another way to accomplish this.  The problem with the computer startup portion is that it runs before the user logs in.  And applying this script
    in the login script section would not work per computer unless you used loopback processing.  So another way to do this is to place a script that sets the default printer into the "All Users" startup folder.  Items in the "All Users"
    startup folder run for any user that logs into the computer, but it runs in the user's context.  So, this script would effectively set the default printer on a "per machine" basis.  The script method is a cruder way to approach the problem,
    but it will help get the job done.  Here are some resources on setting the default printer via script:
    http://www.intelliadmin.com/index.php/2007/08/set-default-printer-from-a-script
    http://www.computerperformance.co.uk/ezine/ezine17.htm

  • Another startup-issue

    I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
    After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
    Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
    Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
    Thanks in advance,
    Timo

    Hi
    +"Would you say the USB-slot is broken in any way?"+
    Possibly? Running an Apple Hardware Test might say?
    +"Is it something that can be fixed?"+
    Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
    You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
    Tony

  • Black Macbook Startup Issues

    Hey guys.
    I'm having a distressful startup issue with my Macbook (13-inch, black). It's happened to me before, but that was a few months ago and everything was fine. Now it's happening again and I'm getting worried that the workaround I've found won't work anymore.
    The first time it happened, I wanted to restart my computer because I had installed a bunch of things and it was running a little slow. After I restarted, I heard the "GONG", the apple appeared, and the spinning gear also appeared. It seemed to be working, but after a few minutes, the apple changed to a "do not enter" sign.
    I tried resetting the P-RAM to no avail, and finally ended up starting up in Safe Mode (by holding the Shift Key) which at least allowed me to start up my computer. From there, I was able to reset and my computer started up normally after that just fine.
    Now, last night, the same thing started happening. There were a few different things that happened this time. For one, I got a big gray box on my screen that told me I needed to reset my computer in a few different languages. Secondly, (the only thing I can attribute the cause to) was that I had opened iChat for the first time in 5 months or so. Shortly after is when I got the box.
    So I reset and started having the same problem. I've reset in safe mode now, and am currently installing an update to OSX 10.6.3.
    The only programs running at the time of the incident were:
    -Google Chrome
    -Text Edit
    -iCal
    -iTunes
    Any help you guys have for me would be GREATLY appreciated! I took it to an Apple store the first time it happened and they didn't know what was wrong with it. :/

    Well, after booting in Safe Mode and installing the update, it started up just fine. I am afraid that this is going to happen again, though. Any help you guys have would be GREATLY appreciated.
    Thanks.

  • Intermittent Startup Issues, Fan Reving

    Has anyone else had startup issues with the G5's? I have had to re-seat memory in my lab on 3 machines and this seems, so far, to have alleviated the problem.
    The funny thing is I have had these machines for about 8 months and never had this problem. My computers are locked and access to the physical memory is impossible.
    Just curious?
    Once I tried to run in Open Firmware the computer beeped 3 times, thus telling me it was a memory issue. Each of the machines exhibited different symptoms??? One was caught in the blue screen. One in the gray screen with neverending fan reving and spinning startup wheel. Lastly, a frozen computer (in an account) where all keyboard and mouse commands are not recognized. Upon hard shutdown and restart either this machine ended up stuck in gray screen **** or started ok.

    Yeah, if you are in a humid lab (i.e. animal research lab) or some other unique environment sometimes the conditions can be less than ideal.
    Most electromechanical connections, such as the slots where the RAM plug in or PCI card slots or cable connections, are more apt to become less than optimal in such a condition.
    Another problem tends to be that the G5 is a hunk of cold metal when powered down or even sleeping and in a cold room. Humidity loves to condense on cold metal and has been known to cause problems.
    However, since all you have had to do thus far is re-seat the RAM, the impact seems to be minimal at this time.
    Luck-
    -DaddyPaycheck

  • Office 2010 setup thru computer startup script

    I am trying to install Office 2010 (sp2 seperate in the updates folder) thru group policy startup script and configured with OCT .msp file. Also try to start Access Runtime 2010 with SP2 update in the updates folder.
    In group policy set run scripts asynchronisely disabled and run scripts visible enabled otherwise i could not see what the system was doiing also not when configiguring OCT with full display. The gpo settings lets the screens show during install so the user
    can see what happens.
    There is another problem that rises however: I have made 2 batchfiles and both are starting as a computer startup script in seperate gpo's (that is in another post). First the Accessruntime is installing, after that Office 2010 is running. Both are installed
    after login but only one of the 2 have SP2 installed (7015) in this case Accessruntime has it. When i run only the Office 2010 install and not the Accesruntime 2010 then Office 2010 standard has also SP2 installed (version 7015). When running both only Runtime
    has this sp2 and Office has 4763 this is without sp2 i believe.
    In both folders (Office en Runtime) are the update files .msp in the updates folder of the installation, so thats ok.
    Why is only 1 of the 2 installing the SP2 when running both?
    A second thing is when restarting the system and before the login screen appears a message: Upgradepatch cannot be installed by Windows installer becasue the upgraded program does not excist of the upgradepatch is not suitable for this program?
    Here is part of the batchfile:
    IF EXIST "c:\program files\Microsoft Office\Office14\WINWORD.EXE" (goto mkfile) ELSE (goto DeployOffice)
    :mkfile
    ECHO Office 2010 is reeds geinstalleerd>c:\temp\office.txt
    goto end
    :DeployOffice
    call cscript \\sharename\office2010\Offscrub03.vbs ALL /bypass 1 /q /s /NoCancel
    start /wait %DeployServer%\setup.exe /adminfile %DeployServer%\officeconfig.msp
    echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
    Another batchfile
    start \\sharename\accessruntime2010\setup.exe /config \\share\accessruntime2010\config.xml
    REM echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
    freddie
    after installing both runtime and office both have SP2 in updates folder:
    runtime 4763
    Office 2010: 7015
    So in this example runtme is installed without the SP2. installing runtime alone gives with SP2...
    The message is gone. There was a other policy inherited from above that caused the message. The only problem now is that when installing both, runtime 2010 with SP2 files and Office 2010 with SP2 files, then one of the two don't get the Sp2 installed, why
    is that?

    > In the bat file, I have a line that records if the install completes
    > successfully or failed.  I don't have any other logging in my
    > script.  Are you referring to something like GPO logging? I know that
    > the script runs because when I am looking at one of the PCs, I can
    So it is NOT GP related but rather your script fails?!? Put some "echo
    %~n0 %date% %time%>>Log-File-Of-Your-Choice.txt" in it to check what's
    going on. And put ">>Log-File-Of-Your-Choice.txt 2>&1" at the end of
    critical commands to capture their output.
    > I ran the gpresult /h command which shows all User Configuration
    > policies, but NOTHING appears under the Computer Configuration section.
    Admin commandline? If not, you don't see computer settings :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))
    Martin,
    I still did not figure out why the installation script did not work for some of the PCs, even though the PCs have the same image.  For the ones that don't work, I will install manually.  Can you please look at the screenshots of the GPO
    settings I am using, and let me know if there is any settings that I need to remove or add?
      Thanks

  • New StartUp Issue

    My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
    After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
    The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
    I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
    Any ideas guys??

    you can try to boot to safe mode ( restart holding Shift )
    - you can attempt to boot to install disc and disk utility
    - you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
    - chances are, this is a hardware issue though. you will probably need repairs.

  • Startup issue - Process 'Starting Framework'

    Hi
    I seem to have a startup issue with NM2004s.  I get a Half Green/ Half Yellow icon in the MMC.  The 01 instance is always yellow and never progresses onto green.  I have a process status of 'starting framework'.
    Anyone else had this issue?
    Cheers
    Ian

    Hi Ian,
      I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
      Any hints would help.
    Thank you

  • Managed server startup issue!!!

    hi all,
    i am facing managedserver startup issue
    i am start the managed server it will up take the 6 min
    how to reduce the time
    1)i am trying differnt ways 1)threaddump 2)GCparamets
    but no usee
    can u see the log and give me suugestions
    below log one perticuler area it will load the application 4 min
    please see the time stamps 8:31:01 to 8:35:09
    please give me suggistions!!
    ======================================
    ####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

    hi sandeep,
    i take the thread dump 10 times at the start the server can u look into this one...
    ===============================
    CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
    PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
    Your environment has been set.
    QCHTTPHeaderIdentityAsserter.initialize
    AgileAuthenticationProviderImpl.initialize
    2010-04-10 20:03:14
    Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
    "Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
         - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at java.lang.Thread.run(Thread.java:619)
    "LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d820a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
    "LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d920a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
    "VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at java.lang.Object.wait(Object.java:485)
         at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
         - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
    "ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
    java.lang.Thread.State: RUNNABLE
         at weblogic.socket.PosixSocketMuxer.poll(Native Method)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
         - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
         at java.lang.Object.wait(Object.java:485)
         at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
         at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
         - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
    "weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
         - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
         at java.lang.Thread.run(Thread.java:619)
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
    java.lang.Thread.State: RUNNABLE
         at java.util.HashMap.<init>(HashMap.java:209)
         at java.util.jar.Manifest.<init>(Manifest.java:37)
         at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
         at java.util.jar.JarFile.getManifest(JarFile.java:146)
         at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    "Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2d76210> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2da0170> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
    java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
         - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
         at java.lang.Object.wait(Object.java:485)
         at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
         - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
    "main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
         - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
         at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
         at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
         - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
         at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
         at weblogic.Server.main(Server.java:67)
    "VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
    "GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
    "GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
    "GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
    "GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
    "GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
    "GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
    "GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
    "GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
    "GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
    "GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
    "GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
    "GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
    "GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
    "GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
    "GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
    "GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
    "VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
    JNI global references: 957
    Heap
    PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
    eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
    from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
    to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
    PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
    object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
    PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
    object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • QuickTime opens at computer startup

    I've tried the Preferences and the QT Preferences and it's really starting to P me Off.
    I DON'T WANT QT to start up on it's own on computer startup
    I have Pro, Perian and flip4mac ... is the problem with them???

    Preferences, users, login items, minus sign after selecting QT.

  • How do I stop Firefox launching at computer startup?

    How do I stop Firefox launching at computer startup?
    ''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746670 here]''

    Firefox has no option to launch at startup, it will be an operating system setting that is launching Firefox.
    # Log in as the user who wishes to have a login item or as an admin user.
    # Choose System Preferences from the Apple menu.
    # Choose Accounts from the View menu.
    # Click the name of the user.
    # Click the Login Items button
    # Select Firefox in the list of startup items.
    # Stop Firefox launching at startup by clicking on the minus sign.

  • Have any ideas re: G5 startup issues? Long post...

    My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
    Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
    Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
    Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
    I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
    My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
    I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
    Thanks in advance.

    Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
    That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
    I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
    Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
    To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
    Thanks.
    G5 Dual 2.5 MHz Mac OS X (10.4.8)

  • Gpo computer startup scripts not running

    Hi,
    I´m making some test with a windows 7 pro 64 bit computer and a 2008 r2 domain controller where I have created a computer startup script. I give you more info:
    Domain functional level: 2008 R2
    DC: 2008 R2
    Client: Windows 7 pro x64
    Gpo: Computer configuration -> Windows configuration -> Script -> Startup
    Type of script: bat file copied on \\domain_name\SysVol\domain_name\Policies\{461E688A-E8F8-4C9B-8419-FE83DCDD4C26}\Machine\Scripts\Startup
    The windows 7 machine is full updated, windows firewall disabled, uac disabled, windows defender disabled.
    The bat file works and the gpo is applying, i have seen it via gpresult, another gpo which is in a top level works fine.
    I need some help please, because I don´t know what to try.
    Thanks in advance.

    Hello Egoitz28,
    Do you mean that you add the bat file in the startup group policy and gpresult shows that it is applied, but the bat is not run?
    Please share us the bat file to test.
    Logon/Logoff scripts could only be applied to users, whereas Start-up/Shutdown scripts applies to computers.
    I create a test.bat start %windir%\system32\notepad.exe, and add it to the User Configuration->Policies->windows Settings->Scripts->Logon in the Default domain policy. And it works.
    If I create in the startup policy in Computer configuration, I can see it in the gpresult, but it doesn’t work.
    Please test if the bat works in the Logon policy.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

Maybe you are looking for

  • Question about Audigy 4 and bug report regarding the THX-cons

    Will there be a non-pro version of the Audigy 4 and when? The THX-console doesn't remember its settings when I switch from one speaker config to another. This is pretty annoying since I use both a hi-fi system and headphones. Could you fix this pleas

  • Alternate Tcode For MIGO

    Hello Gurus, What is the Tcode for listed below other than Migo Transfer Posting Place in Storage Display cancellation Goods Issue Goods Receipt Remove from storage Release GR blocked stock Return Delivery Subsequent Adjustment Subsequent Delivery Re

  • Slide to unlock doesnt work

    when i slide to unlock it doesn't do anything i am only able to answer calls through my bluetooth headset. When i turn my phone off and then on and it asks for my passcode only the numbers 1-6 work. can anyone help?

  • Why have my Entrourage and iCal stopped syncing?

    After months of working flawlessly, new events in Entourage have stopped syncing to iCal. Short of wiping out my old Entourage calendar in iCal and re-importing, how can I get a new event to show up in iCal?

  • Net viewer

    Hi all, i recently completed my graduation in engineering, i want to learn net weaver, i need information on 1.does it need any programming knowledge. 2.i know abap. is it help ful. 3.how are the job opportunities for freshers(trained in net weaver)