Computer stuck during normal operation with weird display

My Toshiba Satellite M205-S4806 is getting stuck pretty quickly after startup.
The display displays streaks as shown in the attached picture.
This does not happen in safe mode.
I thought that reinstalling the OS would solve the problem, but during installation of Windows 8 it happens again.
I ran out of ideas as for the cause of the problem or it's solution.
Attachments:
DSC_0497.JPG ‏1021 KB

Hi ! If Dave's suggestion doesn't work, you might try a clean boot.http://support.microsoft.com/kb/929135
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Similar Messages

  • Pavilion DV7 2120 ed, above 90 degrees C during normal operating, 1 year old

    Hello,
    My HP Pavilion dv-7 2120 ed has recently had his first birthday. Unfortunately the fan started working harder and harder. Yesterday I didn't trusted it anymore, therfore I downloaded Speedfan. He told me during normal operating (internet + music player) that the CPU reaches a temperature above the 90 degrees Celsius.
    Quite a shock!!!
    He doesn't seem dirty from inside.
    Does someone have the same problem with the same notebook?
    How come?
    But more important, what can I do?
    Thanks in forward
    William
    Holland

    Even if there is not visible dirt when you just open the keyboard, for example, sometimes there is a dust clot blocking the fan outlet, that you cannot see until you open it all the way up. After one year it could use new thermal compound between the processor and heatsink, too.

  • Pavillion N-15 030us stuck in safe mode with no display

    The display is broken and I was using a monitor connected thru the HDMI cable. I restarted the notebook in safe mode which I take it does not enable the HDMI port? So now I am stuck in safe mode with no display.

    Hello @LogicMantra,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop is not able to display after booting in safe mode, and I would be happy to assist you in this matter!
    To correct this issue, I recommend borrowing an HDMI compatible monitor and updating the drivers for your system this way. If this does not work, please follow this document on Computer Starts but Monitor Remains Blank (Windows 8).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How to transfer pictures from computer ( Windows 7) to iPad with Retina display ?

    How to transfer pictures from computer ( Windows 7) to iPad with Retina display ?

    Note that, if you use iTunes to sync photos onto the iPad, you'll need to use iTunes to take them off.
    if you don't have a lot and want to keep deletability, you may want to consider mailing them to yourself, or uploading them to something like dropbox, then downloading them (via the dropbox app) to your iPad.
    there are also several photo syncing apps out there that may suit your needs. Afraid I don't have any to recommend. But syncing via iTunes isn't the only way to get photos onto your iPad..it's just the  built in way

  • 113 degrees Fahrenheit during normal operation.

    I heard about heating problems on the 2011 MacBook Pro, and I was wondering whether 113 degree Fahrenheit durning normal operation (i.e. idling, Mail, simple Safari sites, etc.)?

    Most MBPs run hotter than that most of the time. You are probably using yours very lightly. Don't even begin to worry until it goes over 180°F and stays there with its fans roaring. That may never happen, depending on how you use the machine.

  • I am having ipad 3.whenever i sync ipad with my pc the computer stucks during the sync and leaves me with the option of turning off my pc and restarting it.I am using windows xp.

    This problem started to occur from day 1 but since then i rarely use itunes.But now i want to upgrade to ios 7 when its available via itunes.

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • MacBook 5,1 Fan Noise During Normal Operation

    Recently, my MacBook 5,1 with an Intel Core 2 Duo processor and 4GB of RAM has started making loud fan noises. The fan speed is steady at around 2,000 RPM (I belive this is normal), and the CPU temperature is staying around 60 degress celcius (also normal, I believe). I have done an SMC reset, done some troubleshooting, Activity Monitor isn't showing anything abnormal, and I have not installed anything recently or been using the machine in any way I haven't in the three years I've owned it.
    Is the fan broken in some way? Is the MacBook just aging? Should I take this issue to a Genius Bar?

    A lot of people have the same problem with the iX core macs. You can try Fan Control to gain manual override of the fan speed, if it bothers you, but I have to warn you, that semiconductors should not reach a temperature higher than 85C (185F), as some semiconductors will lose their conductivity above 85C. I don't exactly know what materials are there in the iX CPUs, but just to stay safe, don't go over 85C if not necessary. Also you should know, that if a semiconductor operates on high temperatures, it can lose its conductivity sooner than it should (think 25 years instead of 28), so use carefully. You can download Fan Control form http://www.lobotomo.com/products/FanControl/
    Regards,
    Gábor

  • During normal operation (fresh install, no plugins) periodically and unpredictably hangs for about 15 seconds before continuing.

    Program hangs for a number of seconds before continuing. All operations within the window are arrested.
    Attempted reinstall of Firefox 6.0, and also disabled all plugins. Reenabled plugins (shown in info. below). Attempted rebooting.
    Problem occurs periodically, at random intervals when browsing, typing, or doing any task.

    I assume that it isn't caused by an extension and that it still happens with all extensions disabled?
    Which security software (firewall, anti-virus) do you have?
    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • During normal operation the screen goes black???

    Hi! For the past few days, I'll be reviewing email(Mac) and/or looking at a web page (CNN or eBay) and all of a sudden the computer screen goes black. The mouse will not work, no keystrokes work either. I have to press the on/off switch on the computer, hold it until it shuts down and then restart the computer. I've reset Safari, emptied cache and that's about all I know to do. This problem is very annoying. Any help would be GREATLY appreciated!!! Thanks

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • DB2 Log file retrieval during normal operation

    Hi,
    We recently upgraded our databases to DB2 v9.7 FP1 and started noticing entries in the db2diag.log that state a log file is being retrieved (after it was archived). We are not performing a restore, although this only seems to be happening during the time our online backup is running.
    This is one example of an entry in the db2diag.log:
    2010-08-18-21.52.43.687630-300 I46847828A425      LEVEL: Warning
    PID     : 27014                TID  : 19          PROC : db2sysc 0
    INSTANCE: db2qas               NODE : 000
    EDUID   : 19                   EDUNAME: db2logmgr (QAS) 0
    FUNCTION: DB2 UDB, data protection services, sqlpgArchiveLogFile, probe:3180
    MESSAGE : Completed archive for log file S0052437.LOG to VENDOR chain 1 from
              /db2/QAS/log_dir/NODE0000/.
    .<other messages>
    2010-08-19-03.13.37.185763-300 I46895785A364      LEVEL: Warning
    PID     : 27014                TID  : 19          PROC : db2sysc 0
    INSTANCE: db2qas               NODE : 000
    EDUID   : 19                   EDUNAME: db2logmgr (QAS) 0
    FUNCTION: DB2 UDB, data protection services, sqlpgRetrieveLogFile, probe:4130
    MESSAGE : Started retrieve for log file S0052437.LOG.
    2010-08-19-03.14.38.221285-300 I46896150A418      LEVEL: Warning
    PID     : 27014                TID  : 19          PROC : db2sysc 0
    INSTANCE: db2qas               NODE : 000
    EDUID   : 19                   EDUNAME: db2logmgr (QAS) 0
    FUNCTION: DB2 UDB, data protection services, sqlpgRetrieveLogFile, probe:4148
    MESSAGE : Completed retrieve for log file S0052437.LOG on chain 1 to
              /db2/QAS/log_dir/NODE0000/.
    It doesn't appear to be causing any harm, but can someone please explain why DB2 would need to retrieve an already archived log file?
    Thanks,
    Setu

    Hi,
    The online backup by default invokes the option "include logs". And that is why you see the required archived logs being retrieved.
    Benny

  • VXI-MXI-2 loses register values during normal operation. Causing Bus Errors.

    The Setup:
    I have a system with two VXI chassis and a MXI2 bus running
    between them.  Each VXI chassis has a
    VXI-MXI-2 card in slot zero.  The first
    chassis has VXI cards and the second chassis has VME cards.  I set registers 0xA, 0xC, 0xE, and 0x10 to
    0x6100 on the first chassis’s VXI-MXI-2 card and 0x6180 on the second chassis’s
    VXI-MXI-2 card. 
    The Problem:
    This configuration runs smoothly 99% of the time.  Every so often we get a hiccup and lose the
    values in the 0xA, 0xC, 0xE, and 0x10 registers on the VXI-MXI-2 card in the
    second chassis.  The registers on that
    card are set to their default values of 0x1800. 
    This causes a problem, because we are unable to access the VME cards in
    the second chassis until the register’s values are reset properly.  We have verified with a bus analyzer that our
    software is not writing zeros across the VXI/MXI bus to those register.  It appears as though the second VXI-MXI-2
    card is seeing a hard reset.  The first
    chassis is definitely not experiencing a hard reset.
    Attempted fixes that have not worked:
    1) We put back the register values back into place whenever
    we detect that the MXI2 registers have been reset.  We poll the registers at 1Hz.  While this fix is semi-adequate, there are
    times that we access the registers in the second chassis more frequent than
    1Hz.
    2) We have tried swapping out our second VXI-MXI-2 card with
    a new card, but the problem persists.
    3) We have also swapped out the second VXI chassis with a
    new chassis, and that did not work.
    My questions:
    What could be causing this problem?  Has anyone else seen this problem?  What would cause the values in the VXI-MXI-2
    card to reset to zeros besides a hard reset? 
     Any suggestions?
    Thanks for your input,
    Mike Arthur

    Hi Mike,
    We currently have a support request open on this issue, and we are working on it.
    Thank you!
    Regards,
    Ebele O.
    National Instruments

  • IOS 5 Install Instructions (How to restore apps with progress, how to install on a computer you don't normally sync with, etc.)

    This isn't really a question, but that doesn't matter, right?
    First of all, you know how to upgrade, right? Install the new version of iTunes, plug in your iDevice, click on it on the sidebar, and click Update.
    PRECAUTION: You should sync first, but it's not required at all, especially if you CAN'T sync because you're updating on a secondary computer. iTunes will create a backup for you during the update process.
    If you are updating on a computer that you normally sync with...
    Just click Download and Update!
    If you AREN'T updating on a computer that you normally sync with...
    You'll get a message that says it will erase everything on your iDevice.
    Who cares? Just update!
    Estimated download times:
    Download Time: 30 Minutes
    Backup Time: (Around 30 GB of data) 1.5 Hours (DON'T SKIP THIS STEP!)
    Update Time: 10 Minutes
    After the long wait, and something on your iDevice shows up about setting up a new device, jump right in and answer the 5-10 questions or so!
    Then, you'll see your new iOS 5 iDevice for the first time.
    WAIT, ALL OF THE APPS, MUSIC, and MORE are gone!
    NO NEED TO PANIC!
    This is normal, and WILL happen in 90-95 percent of users! There is a way to stop this from happening, but don't go that route... It takes DAYS to do... There are two ways to restore all of your apps, WITH THEIR PROGRESS TOO! (Angry Birds time!) Apple will NOT charge you for redownloading!
    1. Just go into the App Store on your device, go into updates, and click the new purchased bar. From there, click the little cloud next to all the apps you need to download. They will redownload with their progress!
    2. Or, you can go into iTunes, (Purchased tab), and from there redownload all of your apps.
    This WILL happen whether or not you do this update on a computer you normally sync with or not. I did this update on a computer I don't normally sync with and it worked perfectly!
    I waited four days researching what will happen if I update on a computer that I don't normally sync with, but with no avail, so I decided to bite the bullet, and this worked perfectly! Time to work on Angry Birds! iOS 5 is worth the 3 hour wait!
    Any questions, feel free to ask!

    This is not working for me. I synced to my computer first, then I did the upgrade on my iphone 4. Once the upgrade completed, my phone got an apple symbol with a line under it, and it is just frozen. I tried to sync back to my computer 3 times, and each time, it stops on step 3/4 for the sync. Under the apps, it says something like 'searching for apps to load.' It freezes there for hours. I waited 7 hours the first time, woke up, did it again and 11 hours later, come home from work, stuck on the same screen again. I restarted itunes, and it will not even let me press the sync button. It is like the sync button is already clicked, and it says - 'loading device.' It has been stuck on that for hours.
    I am so disappointed with this 'update.' My phone worked fine yesterday. Can somebody tell me what to do to get my phone to work again? I do not even care if I keep the update or not. I just want a working phone. Just to be clear, I lost EVERYTHING. I lost the ability to even turn my phone on, and apparently, my computer lost the ability to 'read' my phone. I can see all of the info on my computer, but my phone will not power on, and the computer will not sync my phone to the info that is stored.

  • Is there a function to send window id's to TS to use for placement of the standard panels/windows that are created during normal TS operation?

    I have asked this question previously in a different manner and have not received any useful hints. I want to manage the placement of all of the standard TS windows/panels during normal operation of TS.
    Thanks in advance,
    Paul

    Paul,
    I am assuming that you are talking about the File Dialog when you select "Open Sequence File..." from the menu.  The code for the dialog is encapsulated as a command in the Operator Interface.  If you look in the TestStand help, under Command Kinds, you can see all the coded commands that will cause the OI to respond.  The CommandKind_OpenSequenceFile command is what causes the File Dialog to popup.  When the user selects the proper file and chooses to Open the dialog, the OpenSequenceFile command triggers a DisplaySequenceFile event.  This event is handled by the Application Manager with a callback function (or VI if you are using LabVIEW).  The SequenceFile gets updated in the SequenceFileView manager.  Unfortunately, much of this code is handled internally by the Operator Interface manager controls.  The File Dialog is simply a function that gets called, and the Window handle is never really accessed by the OI developer.
    You may have a few options, however.  There may be a Windows kernel function, that accesses child Window handles.  I would search MSDN for any functions that will help access Window handles.
    The other option is to implement the File Open dialog yourself.  I believe, the File Chooser is a standard dialog popup, that you can call from most programming languages that are accessing Windows functionality.  However, you should trigger the DisplaySequenceFile event after the user selects a file.  This will cause the SequenceFileView manager to be udpated with the proper sequence file.
    I have not tried either of these implementations.
    If you have any questions, please let me know.
    Thanks,
    Tyler T.
    NI

  • Help with CRT display...

    Hi all...
    I'm facing a nasty problem connecting an external crt display to my MacBook Pro.
    First here's the setup:
    -Two MacBook Pro 2.4 GHz
    -G4 Cube 450MHz
    -iBook G3 800MHz
    -CRT DPRO750SB 17" (Nec-Mitsubishi)
    -CRT AT897D-1 17" (Formac)
    -Problem:
    I used to connect the DPRO750SB to one MBP with the Apple's DVI/VGA adapter and everything was fine but now the display doesn't light up anymore.
    Furthermore, trying to boot with the display hooked up make the computer crash during startup.
    -Clues:
    The display and its VGA cable seems OK since there is no problem with the G4 Cube (VGA to VGA) nor the iBook (mini-DVI/VGA).
    I have no problem using the Formac Display with both MBP (DVI/VGA).
    The DPRO750SB icc profile don't show up anymore in the "Displays" Preference Pane.
    I'm able to get the DPRO working sometimes by plug the Formac in, unplug it, then plug the DPRO in.
    (in this case, the "Displays" Pref Pane says it's the Formac).
    I'm really lost now...
    Any help would be greatly appreciated...
    Thanks
    Fabrice

    Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to.  Does anyone have any suggestions?  PLEASE HELP!  
    twanto

  • How do i stop an old apple ID and password prompt from always popping up on my phone during normal use ?

    How do i stop an old apple ID and password prompt from popping up on my phone screen during normal operations ?

    How to change the Apple ID on my iOS Device
    Settings > iTunes & App stores.
    Tap your Apple ID, sign out then sign back in with new AppleID.
    Settings > Facetime.
    Tap your Apple ID, sign out then sign back in with new AppleID.
    Settings > Messages.
    Turn off iMessages, wait 10 seconds, then turn it back on.  Go to 'Receive messages at' and then tap your Apple ID.  Sign out of the old ID, then sign in with new Apple ID.
    Settings > iCloud.
    Delete the account (make sure to KEEP the information on your phone), then turn it back on with new Apple ID.
    Also, delete any apps that were downloaded with the 'old' Apple ID, then reinstall them with your 'new' ID.

Maybe you are looking for