Computer stuck on "Installing Microsoft Intune Client Software"
Hi,
One of our computers installed Microsoft Intune again after his harddrive crashed. We remote wiped the specific device from the admin panel. The client installed but never really succesfully finished the installation. We tried to uninstall the agent again
using de admin console and the "ProvisioningUtil /UninstallAgents /WindowsIntune" cmd.
Now the client doesn't appear anywhere in the admin portal, Nor has the device been "enrolled" in the Company Portal-app. The agent reports with it's Icon in the tray (with Hourglass). When hovered above it states "Installing Microsoft Intune
Client Software".
Serveral days has been passed and still it hasn't resolved yet. Can someone help me here?
Note: OS: Windows 8.1 x64
Kind Regards,
UFadmin
Please open a support case and they can help you remove the agents from the machine.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.
Similar Messages
-
Microsoft Intune Client Software Installation in Windows Server
Intune Client Softwrae is being installed in client PCs, but can anyone tell me that Microsoft Intune's Client Software can be installed in any ver. of Windows Server? If not then how to install Intune Client Software?
The Microsoft Intone agent can not be installed on any version of Windows server (see also:
http://technet.microsoft.com/nl-nl/library/dn646950.aspx#BKMK_DeviceReqs). The only way to manage your servers is to integrated with ConfigMgr and use the ConfigMgr client.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How to mass deploy Windows InTune client software with GPO
I have been looking for mass deploy Windows InTune client software. The only option that I had was with GPO. As we know the exe is not possible to deploy with GPO. Ok, we can play arouund with ZAP files or tranform exe to msi. In my opinion this is
rather »walk-around« the »enginering aproach. So, how can we mass deploy InTune client with GPO. We need to extract the msi from exe. The command is »Windows_Intune_Setup.exe /Extract <destination-directory> ». The command extracts exe to x86 and x64
client msi install. Then we can deploy throw GPO. The »WindowsIntune.accountcert« file must be in the same folder share as described in document http://technet.microsoft.com/en-us/library/jj676611.aspx.
I have tested the deployment, and works good.Hi,
Thanks for your sharing here! And this should be post on the Group Policy forum, I will move it there!
Regards,
Yan Li
Regards, Yan Li -
my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?
Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
[Microsoft Intune] Deployed software not showing up in web portal
I am testing microsoft intune in a testlab. I have downloaded the trial and installed it on the server and I synced my AD users with intune. After that i added a windows 8.1 device. I can reboot the machine remotely with the admin console and i can schedule
virus scans. I can also see the detected software on the admin console. I've deployed a software with the intune admin console to that device and all users but when i login in the company web portal and go to the apps it doesnt list the software that i have
deployed, instead it just gives me a message saying: We couldn't find a match. Try a different search
term or category.
I deployed the software a couple days ago and still didnt show up in the web portal on any of the users. However when I go to the Windows Intune Center on the windows 8.1 machine and check for updates a new window pops up and says that there is one update
ready to be installed, which is the software i've deployed. I press install but the installation doesnt progress at all.Hi,
I also has the same issue and scenario highlighted.
I'm currently using the 30 days trial.
This are the steps I have done for publishing app installers on Company Portal:
1. Created a user group call "Test" under Admin Console > Groups > All Users
2. Added 2 Office365 user accounts in "Test" group
3. Publish exec and msi app installers using the Intune Software Publisher tool
4. Select the app installer and click Manage Deployment under Admin Console > Software > Managed Software
5. Add "Test" group and set the deployment action as Available Install
6. Under the Current Status Of This Software of the app installer, I can see the Office365 accounts in "Test" group
Is there anything which I have missed or done wrongly? -
Anyone installed the Oracle client software on MBP?
Hi there,
I'm running into problems installing the Oracle 10g client software (not the server) on my macbook Pro (Intel)
The instant client installs fine, but it doesn't have the tools I need (sqlldr, imp, exp). During the install the installer gives me a java UnsatifiedLinkError.
Any thoughts? Sorry if I've missed a previous thread on this, but searches turned up nothing.So do u mean if we have SQLPLUS on the box, it implies that client tools are installed ?
and the SQLPLUS.exe is the one that indicates the existance of client tools on a box and this has to be present on the box to say that the clinet tools are installed.
Can we have client tools on the box with out SQLPLUS.? -
SQL developer not installed with the client software
Hi All,
OS: Windows
Clinet: 11g 64 bit
I have installed oracle client for windows 64 bit, as we know with client installation the sql developer also comes with. But in my case, I am able to find every other component but sql developer.
I am thninking of downloading the same from Oracle site, is there a alternate way for the same?
Regards,
SphinxWhat, exactly, did you install?
Did you install the Instant Client? Or did you do a full client install? If you did a full client install, which option did you pick during the installation process-- Administrator, Runtime, or Custom? If you did a full client install that didn't include SQL Developer, you can always restart the Oracle Universal Installer, do a custom install, and choose to install just SQL Developer.
That being said, my bias would generally be to download the most recent version of SQL Developer from OTN separately. SQL Developer gets released much more frequently than the Oracle client so the version on OTN is generally multiple revisions more recent than the version that was shipped with the client. If you're going to be developing code, you may as well leverage all the new features of SQL Developer rather than settling for whatever version was current when 11.2 was released.
Justin -
Help! computer stuck while installing automatic updates
Hi there, I'm having a problem while installing the automatic updates. I bought this iMac about 7 months ago and I've installed all the automatic updates without any problems, but since 2 weeks ago when the updated software asked me to restart my computer to install the new updates, the computer just got stuck after loging out when the INSTALLING UPDATES windows appears. It stayed there for about 6 hours (I thought it was like a really large update) but the process bar was still like in 1%. So I just pressed the ON/OFF button and restarted the computer.
Now I have 4 updates outstanding and everytime I tried to install them the same happens, the computer gets stuck in the installation window.
Does anyone here know what could be wrong and how to fix it? is there any way to delete the installations remaining and start right from scratch or something?
Please I need help! this is the first Mac I've ever had!
Thank you all.
Cheers,
German D Salamanca
<Edited by Moderator>Hi German D. Salamanca;
You really should not post you email address in your thread. Addresses posted in this manner can be harvested for use with spam. If you wish to you can place your email address in your profile instead.
I am going to suggest to the monitors that they edit your message to remove the address.
Allan -
I've just installed a VPN Client Software for x86 64-bit version of Vista and Windows 7 (vpnclient-winx64-msi-5.0.07.0440-k9.exe) to Windows 8. It's working without problem except that it seems to add an entry "c:\Windows\Installer\{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D}\Icon09DB8A851.exe" onto startup task. I suspect the installer program (InstallShield) is not working properly. I'd like to know if anyone has same issue or my computer got infected in malware.
Hi I have installed and config to my client a ASA 5515 and everything is fine but. When I config L2TP/IPSEC VPN for the remote work bang I have a problem. When I config L2TP/IPSEC VPN to Windows 7 with native client on Windows everything is fine, but in Windows 8.1 is bad on 1 hour after VPN connection Windows 8.1 tries to renegotiate the connection and something happens and the connection is disconnected.
LOG:
5
Feb 14 2014
14:53:07
713049
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete for User () Responder, Inbound SPI = 0x869df107, Outbound SPI = 0xfb02e574
4
Feb 14 2014
16:41:08
113019
Group = DefaultRAGroup, Username = s.choraliev, IP = XXX.XXX.XXX.XXX, Session disconnected. Session Type: L2TPOverIPsecOverNatT, Duration: 1h:48m:01s, Bytes xmt: 29765217, Bytes rcv: 9633270, Reason: L2TP initiated
5
Feb 14 2014
16:41:09
713119
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 1 COMPLETED
6
Feb 14 2014
16:41:09
602303
IPSEC: An outbound remote access SA (SPI= 0x805CA50C) between XXX.XXX.XXX.XXX and XXX.XXX.XXX.XXX (user= DefaultRAGroup) has been created.
5
Feb 14 2014
16:41:09
713049
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete for User () Responder, Inbound SPI = 0x9a7f5ac6, Outbound SPI = 0x805ca50c
5
Feb 14 2014
16:41:09
713120
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 2 COMPLETED (msgid=00000001)
And the VPN session is stack. -
Hello
We have recently installed Microsoft Intune on all of our computers and they all work fine except one, it had updated but not it is caught in a update loop where it restarts the machine after it failed to install updates but once it boots back up it
tries to install the updates again than restarts which is where it will let me log in again. does anyone have any advice?Hi,
It is probably related the update itself and not Intune in that way, here are some tips on how to troubleshoot a failed software updates.
https://social.technet.microsoft.com/Forums/en-US/6c7dfc54-216e-4454-bbf5-933c115967e5/windows-update-fails-every-time
If you don't want it to try to install it again, create a group and exclude the update in question for that group while you troubleshoot..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Oracle 9i Client Software On Windows 8 64 bit
Hi Guys,
How to Install Oracle 9i client software on Windows 8 64bit?
Please help on this one.
Thanks in advance.d1f6d790-7017-49dd-bd62-4a31fbab607f wrote:
Thank you very much srini.
Actually the answer is it's a big organization, not that easy to upgrade to latest version. So currently using the old one.
They didn't find it so difficult to upgrade the OS to a bleeding edge version .... so why do they find it difficult to upgrade the Oracle client? Are they also running MS Office 95, "because it's not so easy to upgrade"?
In big organizations, new desktops are built from an image, and that image can just as easily be built with a newer version of Oracle client, if need be. -
If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Macbook Pro, would it be compatible with my computer if I put it in bootcamp? (I have all of the current software updates)
In order to run Windows Applications, you must own the applications and, since they require Windows, you must own Windows. There are technologies like wine that will allow Windows applications to run without Windows, but they tend to be flakey at best.
-
Captivate 7 Stuck Loading after installing Microsoft Office 2013
Before the problem started, I initially had Adobe Captivate 5 (not 7) and have been working fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page—the welcome screen never shows up. After I checked this blog on the forum, which is blaming 3rd party fonts that may cause this issue to happen—I never installed any 3rd party fonts—I wasn’t sure if Office 2013 come with additional fonts that are not compatible with Captivate 5. So I removed Captivate 5 and installed the trail version of Captivate 7 (32 bit) thinking that Captivate 7 will be okay with any additional fonts that come with Microsoft Office 2013. Still having the same issue—can’t get the welcome screen—stuck on the loading screen. Regardless, whether I try to start the software or try to open an existing Captivate file by double clicking.
As per another blog on the forum, I also tried removing/renaming Captivate folder located in C:\Users\MYUSERID\AppData\Local\Adobe but that didn’t help either. Now I have completely removed Captivate 5 folder from the directly as I have installed Captivate 7—still stuck with the same problem.
I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 Update 25, downloaded latest AIR update and of course every time removed any software, I did restart the computer to update the registration keys before installing a newer version of a software.
You help and advice will be greatly appreciated! Many thanks!
Regards,Hello Parth.
Many thanks for your help! It worked!
After deleting every font I could (out of 820 fonts, ended up deleting 687 fonts--only 133 remined that were proected-system fonts) I am successfully able to launch Captivate 7. I guess Microsoft Office 2013 did install some fonts that conflicted with Captivate 7 (even version 5). By the way, Myriad Pro, my favorite font when it comes to Captivate, is also system-protected that I couldn't delete. I now just have to work on Part B, and slowly reinstore the deleted fonts in small batches to keep Captivate working.
Thank you again for the tip ... much appreicated!
Regards,
Farooq -
Firefox crashes when I try to watch a movie type youtube, has just installed nero and Nikon software on my computer. This began shortly after I installed my new CD burner with Nero 9 burning software, about the same time I also installlerade my new Nikon camera software ViewNX2, I ran Avira scan and Microsoft Egan virus scan and they say everything is good in it, he reported a few times, I ran Avira scan of your computer and Microsoft's own Virus Scanning and they say everything is good in it, he reported a few times, tried again now and the sound is heard all the way but the image is still, therefore gentle freezes, got no number on the bug report so I can not say that. Also ask your pardon for errors in language that may be present but hope you understand anyway!
Double post, answered in other thread written by same user.
-
Is it possible to have 64-bit 11g Full Install and 32-Client on 1 computer?
Here's why I ask:
I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support (Cognos 10.1) requires 32-bit client (for drivers) so I installed the 11g client also on D: drive as well (for space reasons).
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
My sqlplus in the 64-bit OH worked fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) did not work. The error was:
SQL*Plus: Release 11.2.0.1.0 Production on Mon Sep 26 18:02:30 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: cognos
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Any login id (sys, system, etc) gave same error. 64-bit sql-plus worked fine. If I opened a cmd prompt and navigated to the 32-bit sqlplus under the client this WOULD work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!? The Cognos application appears to use the default server settings (most likely from ORACLE_HOME and Path) and in it I just type the name of the database and connection string, there's no real way to point it anywhere to differentiate. If it doesn't find 32-bit drivers it throws an error hence the reason I need the client sqlplus, etc to work.
Thanks in advance for any help!
Dave
Edited by: lo**** on Sep 26, 2011 4:20 PMDuplicate post.
{thread:id=2290122}
Maybe you are looking for
-
When ever I try to click on the iCloud symbol/button it doesn't work and I can't buy the HD version of it either. I tried downloading it on my iPod again but it is hooked to another Apple ID so I have to wait like 90 days until I can download it agai
-
Caching service only works for OS X updates and not for Apps
Hello, It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and
-
How do I get rid of the extra table of contents that appears following the Pages export to epub?
When I export my document to epub out of Pages and then open it in ibooks (or any other ereader for that matter) an extra table of contents with links to the document sections appears at the beginning. This toc has its own numbering system--with its
-
Hiii, ich want to get a query result for a certain adress. I have used the search object "COBYADDRQuery". In the transaction GENIL_BOL_BROWSER I get results for this search object, when I type the city in the search object field "CITY1". But in my co
-
Client-side handler: static config?
I would like to provide a client-side JAX-RPC handler that would be invoked without any modification to existing client code. The idea is that user's would only need to modify a config file (something like the web-services.xml file, but on the client