Computer Systems Student: Programming C in Xcode

Hello.
I'm University Computer Systems student, I course in firts programming classes and I have some doubts about program C in Xcode:
How I can use the commands from C in Xcode, for example:
cout (because this command send me a error to ran my program)
cin (run without problem)
Thanks for you support

Those are c++ not c functions for starts.
In Xcode select OS X application then select the command line tool template and then select c++ as the type.

Similar Messages

HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.

Computer deletes installed programs at will, will not delete others, they return at the next log-in

Computer deletes installed programs at will, will not delete others, they return at the next log-in. Some programs or hardware continue to operate even though you can't locate the programs or files on the computer. Will not disable some features when asked to.

hello Ebenholmes, is this affecting your whole pc (in this case the problem is probably beyond the capabilities of the forum - you might have to install & setup your operating system from scratch again) - or is it only a problem within firefox? in the latter case please refer to [[How to fix preferences that won't save]], especially the part about the user.js file within your profile folder....

When I plug in my iPhone 4S into my computer the iTunes program doesn't open. Only the Music iTunes opens

I have not synced my iPhone for some months. When I plugged it into my computer the iTunes program does not launch. There is an iTunes icon installed but this only opens as a Music/video program. There is no side panel where I select my device, account, apps, etc. I have tried re-installing iTunes but there is no difference. AutoPlay opens when I plug in the iPhone offering file, picture etc sharing but nothing elso opens.

Hi jonboy12355887,
Welcome to the Apple Support Communities!
If your iPhone is not showing in iTunes when connected to your Windows computer, please follow the steps listed in the attached article. I know situations like this can be very frustrating, but the information provided in this article should help you resolve the situation.
iOS: Device not recognized in iTunes for Windows
Have a great day,
Joe

Want to add Video and Graphic Card to my computer system

I Notice that one of the users' in the Apple discussion Board is Listed, (AndyO) he has help me many times in the Past and was succesful in my problrm solution, would he might be able to help me with this?
I had Purchased the Game Spore Creature Creator the Starter Kit which is just the Creature creator game and not the actual game itself. I wasn't able to install the the game on my computer because I don't have the right or not at all Video and Graphic Card install on my computer. I had Contacted the Company "EA" that puts out the Game Spore, this is what they said what the game requirements are: The minimum system requirements for Spore and Spore the Galactic Edition for Mac are as follows:
* Mac OS X 10.5.3 Leopard or higher
* Intel Core Duo Processor
* 1024 MB RAM
* At least 345 MB of hard drive space for installation, plus additional space for created creatures. (260 MB for the Trial Edition)
* Video Card - ATI X1600 or NVidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100
This game will not run on PowerPC (G3/G4/G5) based Mac systems (PowerMac).
For computers using built-in graphics chipsets, the game requires at least: an Intel Integrated Chipset GMA X3100 or Dual 2.0GHz CPUs, or 1.7GHz Core 2 Duo, or equivalent
Supported Video Cards
ATI Radeon(TM) series
* X1600, X1900, HD 2400, HD 2600
NVIDIA GeForce series
* 7300, 7600, 8600, 8800
Intel(R) Extreme Graphics
* GMA X3100
and that I need to upgrade my system. Basically I need; ATI Radeon 1600 or NVIDIA Geforce 7300 and a INTEL Extreme Graphic Video Card-GMA X3100, in order to be able to install and play this game. Since I already have this game, I would like to be able to upgrade my computer system which brings me to ask; does somone know or refer me to a web site that has and sells these Video and Graphic Card and supports for the Mini Mac?
Plus they say that I need a 1020 of MB of Ram, I Have already found that 1024 MB of Ram but I just need those Video and Graphic Cards for my computer system. I am adding my computer system Profile to my discussion board to show you what I have on my system, would you be able to tell me if I would be able to add these Video and Graphic card and the memory or Ram 1024 to my computer system?
Note: Here is a web site that I am looking at to add the 1024 MB of Ram to my computer system:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=24188 41&CatId=2453
what do you think?
Here is part a copy info of my computer system Profile:
Trisha Foster’s Mac mini
10/10/08 5:39 PM
Hardware:
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version: 1.19f2
Serial Number: YM8073Q**
Network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 169.254.247.182
IPv4:
Addresses: 169.254.247.182
Configuration Method: DHCP
Interface Name: en1
Subnet Masks: 255.255.0.0
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:3e:ce:93
Media Options:
Media Subtype: Auto Select
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4 Addresses: 192.168.1.102
IPv4:
Addresses: 192.168.1.102
Configuration Method: DHCP
Interface Name: en0
NetworkSignature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:21:29:c3:12:ae
Router: 192.168.1.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Domain Name: cruzio.com
Server Addresses: 74.220.64.45, 74.220.64.55
DHCP Server Responses:
Domain Name: cruzio.com
Domain Name Servers: 74.220.64.45,74.220.64.55
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.1.1
Server Identifier: 192.168.1.1
Subnet Mask: 255.255.255.0
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:16:cb:af:11:7f
Media Options: Full Duplex, flow-control
Media Subtype: 100baseTX
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:ff:fe:17:17:2a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.5 (9F33)
Kernel Version: Darwin 9.5.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Trisha Foster’s Mac mini
User Name: Trisha Foster (tiger)
Time since boot: 59 minutes
ATA:
ATA Bus:
PIONEER DVD-RW DVR-K06:
Capacity: 423.4 MB
Model: PIONEER DVD-RW DVR-K06
Revision: Q614
Removable Media: Yes
Detachable Drive: No
BSD Name: disk2
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk2s0
Mount Point: /Volumes/SPORE
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 8
Available Devices:
Headphone:
Connection: Combo
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
Trisha Foster’s Mac mini:
Address: 00-1f-5b-72-12-aa
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Macintosh Desktop
Composite Class Of Device: 3154180 ($302104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 385 ($181)
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 10/10/08 4:41 PM
Result: Passed
Disc Burning:
TEAC CD-W540E:
Firmware Revision: 1.0F
Interconnect: FireWire
Burn Support: Yes (Apple Supported Drive)
Cache: 8192 KB
Reads DVD: No
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q614
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
OXFORD IDE Device LUN 0:
Manufacturer: Oxford Semiconductor Ltd.
Model: 0x42A258
GUID: 0x1D200500648AF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
OXFORD IDE Device LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x444133
Product Revision Level: 1.0F
Sub-units:
OXFORD IDE Device LUN 0 SBP-LUN:
Graphics/Displays:
Intel GMA 950:
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
L1916HW:
Resolution: 1280 x 800 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Memory:
BANK 0/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x0000**
BANK 1/DIMM1:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x00001*
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On LAN: Yes
Hardware Configuration:
UPS Installed: No
Printers:
Canon MP830:
Status: Idle
Print Server: Local
Driver Version: 4.8.3
Default: Yes
URI: usb://Canon/MP830?serial=19702D
PPD: Canon MP830
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
Hitachi HTS541612J9SA00:
Capacity: 111.79 GB
Model: Hitachi HTS541612J9SA00
Revision: SBDAC7MP
Serial Number: SB2EF9L7G3**
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 111.47 GB
Available: 63.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Keyboard Hub:
Version: 94.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x1006
Serial Number: 000000000000
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
Apple Keyboard:
Version: 0.69
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple, Inc
Product ID: 0x0220
Vendor ID: 0x05ac (Apple Computer, Inc.)
iPod:
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Product ID: 0x1291
Serial Number: aa1186ca1738fd28eef1eeb1b22754********
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB2.0 Hub:
Version: 7.02
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Product ID: 0x0606
Vendor ID: 0x05e3
USB 2.0 3.5" DEVICE:
Capacity: 153.39 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Macpower Technology Co.LTD.
Mac OS 9 Drivers: Yes
Partition Map Type: APM (Apple Partition Map)
Product ID: 0x0073
Serial Number: BC0*
S.M.A.R.T. status: Not Supported
Vendor ID: 0x0dc4
Volumes:
miniStack:
Capacity: 153.26 GB
Available: 42.96 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s10
Mount Point: /Volumes/miniStack
MP830:
Version: 1.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Canon
Product ID: 0x1713
Serial Number: 197*
Vendor ID: 0x04a9
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.4.4
Current Wireless Network: Trisha's iPod
Wireless Channel: 11
Firewall:
Firewall Settings:
Mode: Allow all incoming connections
Locations:
Automatic:
Active Location: Yes
Services:
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:1f:5b:3e:ce:93
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
IEEE80211:
Join Mode: Automatic
JoinModeFallback: Prompt
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: Apple Store
Unique Network ID: 4BCBEE2D-83B9-4CC1-B110-8D0E8E5DF49C
SecurityType: Open
SSID_STR: linksys
Unique Network ID: F2551FD6-95A7-4F98-9F7F-758A89DBD931
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:16:cb:af:11:7f
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:1f:5b:ff:fe:17:17:2a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
Can someone Please help me with any suggestions or otherwisde I will have to go to a Apple store and ask for help there.
Thank You,
Trisha Foster
<Edited by Moderator>

Hi Trisha,
The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
David

HT3258 I was on Snow Leopard and it allowed me to get into my hospital computer system and applications. I went to Mountain Lion on my Macbook and now I cannot access any of the applications. I need Java which is installed. It is called I 3 system and is

I was on Snow Leopard with no issues accessing my Windows and Java based hospital computer system . I swithced to Mountain Lion and now I have NO access to any of the hospital applications remotely. Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?

davidmarr wrote:
Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?
Restore the Snow Leopard bootable backup/clone or the Time Machine backup. As for making ML work, I've not a clue since I don't do windoze or access things remotely. You'll have to wait for one of those gurus to pop in or just post what's happening when you try at the ML forums.

Ask the Expert: Cisco Unified Computing System Director

With Andrew Nam
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified Computing System (UCS) Director with Cisco expert Andrew Nam.
Cisco UCS Director was designed to operationally integrate bare-metal and virtual data center infrastructure resources to address complex, time-consuming, manual, and compartmentalized management processes. These processes burden IT organizations, preventing them from achieving business agility and efficiency. Cisco expert Andrew Nam will provide an update on installation, configuration, and troubleshooting VM provisioning process using Cisco UCS Director.
Andrew Nam is a data center solution engineer in the DC Solution team in Sydney, Australia, responsible for orchestrating the end-to-end solution support of Cisco Data Centre solutions, including Cisco UCS, Cisco Nexus architecture, VBlock/FlexPod, VDI/VXI, and cloud solutions. His areas of expertise include routing and switching, load balancer, WAN optimization, VPN, and firewalls. Andrew has worked for Cisco for more than 13 years and has 15 years of experience in the networking industry. He graduated from New South Wales University in Australia with a mechanical/manufacturing engineering degree and holds R&S CCIE 9586, VMware VPC5, and Citrix CCA - Xendesktop5 certifications.
Remember to use the rating system to let Andrew know if you have received an adequate response.
Andrew might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in Data Center community, sub-community, Unified Computing discussion forum shortly after the event. This event lasts through January 17, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi James
This Ask the Expert session may not be the right place to show you all the essential steps for how the workflow can be related to task library to achieve your initial setup flow chart, and onboarding a new client.
However, I can briefly walktthrough "Client blade Provisioning" task so it might give some idea and how you can go about.
Assumption : the infrastructure used in the following examples consists of:
- Vmware VCenter
- Cisco UCS
- NetApp ONTAP controlled storage
To be able to provision Cisco UCS blade server in automated fashion, you need to create and define the below UCS entities beforehand.
- Create UCS Organisation
- Create UUID Pool
- Create MAC Address Pool
- Create WWNN Pool
- Create WWPN Pool
- Create vHBA Templates
- Create vNIC Templates
- Create UCS Policy vHBAs
- Create UCS Policy vNICs
- Create Storage Policy
- Create Network Policy
- Create SAN Boot Policy
- Create LAN Boot Policy
Once you create all the policy above, you are good to set up a workflow container for the client blade provisoining.
1. Create UCS Service Profile
- Add a ‘Create UCS Service Profile’ workflow task and select ‘Map to User Input’ for ‘Service Profile Name’. Select the ‘Service Profile Name’ dropdown as created when the workflow container was created.
- ‘Create UCS Service Profile’ inputs. Ensure that Storage_Policy, Network_Policy, Boot_Policy_LAN and Boot_Policy_SAN entries are correct.
- Once this is done , you can move to SAN zoning.
2. Configure SAN Zoning
- In this step, a new workflow task will be created in order to configure SAN zoning. Rather than use a specific user input for this task, output variables from the previous ‘Create UCS Service Profile’ workflow task will be used as input items for this task.
- Open the workflow and search for the workflow task ‘configure san zoning’. Drag the storage workflow task into the work area and map the following user inputs.
Create Flexible Volume
- Create a ‘Create Flexible Volume’ workflow task in order to build a NetApp flexible volume and provision it for the required size.
- Once again, reconfigure the workflow such that the success criteria from the ‘Configure SAN Zoning’ workflow task proceeds to ‘Create Flexible Volume’.
Create LUN
- Using the NetApp ONTAP ‘Create LUN’ workflow task, create a LUN located within the volume created during the previous step. In order to do this, map the Volume Name user input to the output from the previous ‘Create Flexible Volume’ workflow task.
- Next, enter the LUN details, ensuring that the configured size is less than that of the volume created in the previous step.
- As before, re-map the workflow designer flow so that the successful output of the Create Flexible Volume workflow task flows into this task.
3. Create Initiator Group
- Create a ‘Create Initiator Group’ workflow task in order to build a NetApp ONTAP Initiator Group. Map the ‘Filer Identity Name’ attribute to the OUTPUT_FILER_IDENTITY output variable as supplied by the ‘Create NetApp Flexible Volume’ workflow task as created earlier in this workflow.
- Once again, modify the the workflow designer flow so that the successful output from ‘Create LUN’ flows into ‘Create Initiator Group’
4. Add Initiator to Initiator Group
- Create an ‘Add Initiator to Initiator Group’ workflow task and map the ‘Initiator Group Name’ entry to the OUTPUT_IGROUP_IDENTITY output variable from the ‘Create NetApp Initiator Group’ workflow task and map the ‘Initiator Name’ entry to the SP_VHBA1 output variable from the ‘Create UCS Service Profile’ workflow task created earlier in this flow.
- Repeat this task for in order to add initiator name entry for SP_VHBA2. Once done, re-map the successful output from the two Create Initiator Group workflow tasks so that they flow into each other as follows:
- Move onto the next step in order to map the created LUN to the initiator group.
And the rest of steps are fairly similar to above. Create a Workflow and map the User Input Mappings".
5. Map LUN to Initiator Group
6. Modify UCS Boot Policy LUN ID
7. Select UCS Server
8. Associate UCS Service Profile
9. Power On UCS Server
10. Modify UCS Service Profile Boot Policy
11. Add VLAN to Service Policy
12. Disassociate UCS Service Profile
13. Wait for Specified Duration
14. Associate UCS Service Profile
15. Power On UCS Server
16. Register Host with VCenter
regards
Andrew

HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
Anthony

Try this Discussion...
https://discussions.apple.com/message/18783684#18783684

Hi, I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

Lost purchased iTunes after computer system restore

How can I retreive purchsed iTunes that I lost after I had my computer system restored? I re-loaded the iPod + iTunes disc and non of my songs seem available to me.

That is going to depend on what you mean by "restore". If you formatted your hard drive and did not have a backup then the music files are gone and you will have to re purchase them all. Same thing if you
If you still have your music files all you need to do is add them to iTunes. Go to File > Add Folder to Lib... and point to where the files are.
If you believe you still have the music files but do not know where they are try doing a search for *.m4p, or *.mpb, or *.mp3. If the files are still on your hard drive then that should find them.

HT201341 Does the Mountain Lion operating system run programs in the Microsoft Office for Mac 2004 software suite?

Does the Mountain Lion operating system run programs in the Microsoft Office for Mac 2004 software suite?

No, Snow Leopard (10.6) is the last version of OS X that supports Office 2004. You can upgrade to Office 2008 or 2011, or use a free office suite such as LibreOffice.

New computer system, printed colours are wrong, please advise.

I recently bought a new computer system inc Dell U2711 monitor and purchased LR4 and CS6. All was well, or so I thought, until I got some prints done. The prints from my old system (with which I only used elements 10) look fine. Those from my new system look awful, the colours are just wrong. My workflow is RAW image opened in LR then finished off in CS6 before saving as JPEG. The saved images look alright but when I either click view/ proof colors or if I use an image as a desktop screensaver, it gives the same washed out appearance with wrong colours. I'm at the limit of my technical knowledge here, does anyone have any ideas please?

Thanks for that link, I will read that. I've been going through the settings on LR and CS and I think I begin to understand. I've been looking in LR preferences and that gives three options for color space: There is Prophoto RGB (the default which LR recommends as it says the other two don't give the full colour range available in LR) then there is sRGB and lastly Adobe RGB (1998). There is no such option that I can find in CS6 preferences but, when I export a TIFF file from LR4 into CS6 and then save it from CS6 it shows the color as ICC profile Adobe RGB (1998). I also notice that in this setting using the view/ proof in CS6 the colours are slightly askew (they were way off when I had the LR preference set to ProphotoRGB). If however I set the LR preference to sRGB and then export to CS6, using the view/proof the colours stay the same so I'm still a bit confused. Maybe I'm just thick, it's a lot to take in.
I've processed a RAW image in the recommended ProphotoRGB, exported it to CS6 then before saving gone into edit/ convert to profile/ sRGB: the colours have stayed the same and using the view/ proof or save as desktop background = no change and everything looks good. So, is this the way forward and should that format work when printed? (I've only got a crappy basic two ink printer which I wouldn't trust to print anything other than text). Also, is it possible to get CS6 to save as sRGB by default or do I have to go through this routine for every image I want to save and print?

Full time Labview Computer Systems Engineer – London, UK

BPP-TECH are seeking engineers to carry out the development and testing of software for instrumentation packages used in the international offshore oil and gas industry. The software uses National Instrument’s Labview as a base and it is the intent to maintain this whilst re-writing the software in a C++ environment.
The requirements of the role are:
Experience developing SCADA, HMI and instrumentation systems in Labview.
Experience in multiplatform Labview development (Windows and Real-time) and development of multithreaded applications.
Developing Labview applications that utilise MySQL or other databases, interfacing with software libraries in C++
Writing technical documentations, user manuals, and system specifications, for software projects
Understanding of networking and communication protocols (serial, TCP/IP, Modbus, etc.).
A permanent post with competitive salary package including a pension scheme will be offered to successful applicants. BPP-TECH will consider sponsorship towards a UK work permit for those candidates that may require this.
How to apply:
To apply for this position please visit:
http://www.bpp-tech.com/careers/computer-systems-engineer
(Please do not reply to this post)

Aw MAN, and here I was hoping to move back to SLC...
(Ryan! Great to "see" you. Hope things are going well for you over there.)

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

Please read, and reply here with more information https://forums.adobe.com/thread/1499014

Playing iPod on home computer system

I need some advice regarding playing iTunes-purchased songs over my home computer system. I've seen various products that permit one to load music files onto a hard drive component linked to the stereo and even link to TV screens to control song selection, etc. None that I can find will play any songs purchased from iTunes. My house is set up in a way that does not easily permit plugging my iPod directly into the stereo and Air Tunes requires me to be at my computer to control song selection, etc. I just want remote access to song files (my house is fully wired) but don't want to give up all the iTunes music I've purchased. What am I missing? Is there a solution? Thanks in advance.

How to use your iPod to move your music to a new computer using iTunes7
http://docs.info.apple.com/article.html?artnum=300173
How to use your iPod to move your music to a new computer using iTunes6
http://docs.info.apple.com/article.html?artnum=304304
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=1300144
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
http://discussions.apple.com/thread.jspa?threadID=809624&tstart=0
Also these useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
Cheers!
Patrick

Computer Systems Student: Programming C in Xcode

Similar Messages

Maybe you are looking for