Computer unable to post.

1.  Specs
KB SAITEK|ECLIPSE KEYBOARD PZ30AU - Retail (Qty=1, Price=$49.99)
HD 80G|WD 7K 8M SATA2 WD800JD % - OEM (Qty=1, Price=$42.99)
DVD BURN LITE-ON|DH-20A4P-04 20X % - OEM (Qty=1, Price=$25.99)
MB MSI K9A2 PLATINUM 790FX AM2+ RTL - Retail (Qty=1, Price=$179.99)
CASE ANTEC|NINE HUNDRED BK RT - Retail (Qty=1, Price=$114.99)
VGA SAPPHIRE 100226L HD3850 512M RT - Retail (Qty=1, Price=$189.99)
PSU ANTEC|TP3-650 RT - Retail (Qty=1, Price=$109.99)
CPU AMD|A64 X2 6000 3.0G AM2 2x1M R - Retail (Qty=1, Price=$159.99)
MEM 1Gx2|KST DII800 KVR800D2K2/2GR - Retail (Qty=1, Price=$44.99)
MOUSE LOGITECH|TRACKMAN WHEEL RTL - Retail (Qty=1, Price=$24.99)
THERMAL GREASE ZALMAN|ZM - STG1 RTL - Retail (Qty=1, Price=$9.99)
CPU FAN ZALMAN | 9500A - Retail (Qty=1, Price=$48.99)
2.  attempted solutions (keep in mind I always discharge myslef by touching metal before and after I touch any component)
checked all wiring
checked all componets to see if they where all inserted correctly
cleared cmos
unplugged everything and waited an hour
tried diffrent video card
checked if video card was ok with another system (it is)
tried ram in back two slots (i have 2 ram sticks)
tried ram in one slot then switched around and tried the other
unplugged every component from power supply except motherboard and video card
unmounted motherboard and placed it on a sheet of cardboard.
checked for any oozing of thermal paste
turned on motherbard while on cardboard
kept the powersupply plugged in over night to see if capacitors would charge enough to get a post
3.  What exactly happend.
I built the computer a few weeks ago and updated all the drivers.  I have played through bio shock perfectly with no problems.  I have a graphics program called LightWave 3d ver 8.3.    Ran it perfectly as well. I also ran it through 3dsMax and scored fairly high(higher then most but still below the hard core junkies)  About a few days ago the computer started locking up randomly, forcing me to reset.  I started looking for solutions for this instability through my manual's.  I disabled spread spectrum to see if the system would be stabler.  Afterwords the computer locks up just as the last item loads up on the task bar.  So I re enabled it.  Then the system again locks up.  Only this time when i reset I get no post just a blank screen, the cpu fan comes on as well as video card fan.  The Led lights on mobo come on as well.  I've tried resetting it over and over again with no positive results.  Near as I can figure its one of three things.  the PSU, mobo or cpu.   I think I can rule out the cpu, because if it was bad already it wouldn't of let me played through bioshock perfectly.  I would of probably of gotten some choppy graphics or poor performance, something that would of indicated a cpu problem.  I chose this PSU because it was highly recomended by a lot of people.  If you do a search you can find multiple places where hundreds of people have given this item high reviews.  I am completly stumped as to what to do next.  Wouldn't normaly come to a forum but I have no clue what to do except re ship all three items.  But before I do that I need to find out if maybe there is an incompatibility issue with this type of PSU.   Deep down I think the capacitors on the PSU where origionally fully charged, but over time they have drained and now only enouch go go juice to run lights and fans.
on a side note.  Why is hotmail being boycotted ?  its no diffrent than Gmail

"Why is hotmail being boycotted ? "
Because it doesn't work correctly. (users receive blank e-mails from forum)
Start from "LOAD BIOS OPTIMIZED DEFAULTS", then get Memtest86 and check memory for error(s). Details can be found here: https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534

Similar Messages

  • Unable to post in MI07 for sales order stock - Error Check Table XMSSA

    Hi,
    When I try to post in MI07, I get the following error Unable to post - Error 'Check Table XMSSA
    Unable to post - Error 'Check Table XMSSA: entry 0000000000010011000 CA01 E 1500004153 000010 does not exist
    It has something to do with sales order stock. But I am not sure what is causing the issue.
    SAP error details:
    Check table XMSSA: entry 000000000010011000 CA01 E 1500004152 000010   does not exist
    Message no. M7001
    Diagnosis
    In table XMSSA the entry 000000000010011000 CA01 E 1500004152 000010   is missing.
    Procedure
    Make sure your entries are correct.
    If table  has not been maintained correctly, please inform your systems administrator.
    Any ideas?

    Hi Guys ,
      I have faced this same issue . Found OSS note 1360365 . The issue is resolved after implementing this note .
    Regards
    Rajmohan G

  • Dataguard Error in logs Unable to post result to client, status = ORA-16531

    Hi,
    we are getting the following error message in the data guard logs:
    ===================================================================
    DG 2012-01-23-17:39:44 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
    DG 2012-01-23-17:39:44 0 2 0 Status = ORA-00000
    DG 2012-01-23-17:39:44 0 2 0 Severity = ORA-00000
    DG 2012-01-23-17:39:44 1000 2 771584732 Unable to post result to client, status = ORA-16531
    DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
    DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
    DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
    DG 2012-01-23-17:39:45 1000 2 771584747 Unable to post result to client, status = ORA-16531
    DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
    DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
    DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
    DG 2012-01-23-17:39:45 1000 2 771584756 Unable to post result to client, status = ORA-16531
    ===============================================================================
    This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".
    COuld you please anyone incase faced this error in data gurad server, share your experience here?
    Server : Sun SOlaris SParc Netra -T2000
    Database : Oracle 10g
    # FDSCluster info
    Cluster: vs2b
    Member: Member1
    User: fdsuser
    Data Path: /var/opt/fds
    Status: Running
    # srvctl status asm -n `hostname`
    ASM instance +ASM2 is running on node vs2b.
    Guys please gimme some clue why iam getting this error mesage and what need to be done?
    Regards,
    Deeban

    This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".Please log a SR.
    Thanks,
    Hussein

  • Unable to post depreciation.

    Have configured Korea - AA. In AFAB doc is generated in AA for depreciation, but unable to post in FI System is prompting " Enter Section Code".
                                                                                    Message class Message no. Message type                                                                               
    Enter a section code                                                                F5           885          E      
    Errors occurred during creation of FI documents ...                                 AA           766          E      
    Job cancelled after system exception ERROR_MESSAGE                                  00           564          A                                                                               
    Is there someone who have experienced the same error? Please share your views on how to resolve. Thanks Gippy

    Dear Peers,
    Thanks for the fast response. None of the solution were working. As usual error message was misleading us. Right solution was we had to set depreciation and accumulated depreciation account as non-tax relevant - This is Korea specific. After correcting the accounts , was able to post depreciation successfully.
    Error message was bit misleading.
    Once again thanks for all the immediate responses received.
    Regards
    Gippy

  • HT4061 my computer unable to connect itunes server

    my computer unable to connect itunes server,even itune help is also not connect to server
    the massage will be "iTunes Help is unavailable because your computer isn’t connected to the Internet.

    in diagnostics report
    Microsoft Windows 7 x64 Home Basic Edition (Build 7600)
    Dell Inc. Inspiron 1545
    iTunes 11.0.0.163
    QuickTime not available
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00DABA000B0C13D0
    Current user is not an administrator.
    The current local date and time is 2012-12-12 11:43:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.0.163 (x64) is currently running.
    iTunesHelper 11.0.0.163 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {A21769EE-B8FA-43A8-ACC9-8B4AC6B200C6}
    Description:    Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {61D7CACF-EC6D-4ED3-BAE8-0FE3AC647BFF}
    Description:    Dell Wireless 1397 WLAN Mini-Card
    IP Address:    192.168.1.5
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Wed Dec 12 09:36:06 2012
    Lease Expires:    Thu Dec 13 09:36:06 2012
    DNS Servers:    192.168.1.1
    Adapter Name:    {27D403C7-FE78-4FBE-B11B-6D449ACA2B11}
    Description:    Bluetooth Device (Personal Area Network)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {EAB5F805-06F2-4343-AB41-C1BB2A0028F5}
    Description:    Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.

  • Unable to posting in serial order(MB31)

    Hi Dear,
    when we are posting in serial order (900000000269) with 22000 quantity then it is unable to posting in 22000 quantity.
    message hasbeen written Exactly 22.000 serial numbers must be selected .
    (instead of 7.173)
    if we are posting order no with below 14000 quantity then it is posted correct. but above 14000 quantity it is unable to post the serial order number.

    TYPES: BEGIN OF ty_mase,
              matnr   TYPE matnr,
              lsernr  TYPE lsernr,
             alpha_numeric TYPE zalpha,
           END OF ty_mase.
    DATA: wa_imase1(18) TYPE c,
           wa_mara       TYPE marc,
           wa_sernr      TYPE risernr,
           v_string(18)  TYPE c,
           v_imase(18)   TYPE c,
           v_month(18)   TYPE c,
           v_year(18)    TYPE c,
           v_sernum(18)  TYPE c,
           lv_name       TYPE c,
           wa_imase(6)   TYPE c,
           lin(10)       TYPE c,
           lv_month      TYPE char6,
           lv_year       TYPE char4,
           lv_datum      TYPE sy-datum,
           it_mase       TYPE TABLE OF ty_mase,
           lwa_mase      LIKE LINE OF it_mase.
    CLEAR : wa_imase1,wa_mara,wa_sernr,v_string.
    CLEAR : v_imase,v_month,v_year,v_sernum,wa_imase,lin,lv_name,lv_datum.
    CALL FUNCTION 'MARC_SINGLE_READ'
       EXPORTING
         matnr = material_no
         werks = plant
       IMPORTING
         wmarc = wa_mara.
    IF wa_mara-sernp = 'S001'.
       lv_datum = sy-datum.
    *  SELECT SINGLE alpha_numeric FROM mase INTO wa_imase1 WHERE matnr = material_no.
    *  SELECT SINGLE alpha_numeric FROM ZPP_SERAIL_NO INTO wa_imase1 WHERE matnr = material_no.
    *  IF wa_imase1 IS INITIAL.
    *    wa_imase = wa_imase1 + 000001.
    *    lv_name   = 'S'.
    *  ELSE.
    *    lv_name   = 'S'.
    *    v_imase   = wa_imase1.
    *    v_sernum  = v_imase+6(6).
    *    wa_imase  = v_sernum + 000001.
    *  ENDIF.
       v_year   = lv_datum+2(2).
       CASE lv_datum+4(2).
         WHEN '01'.
           v_month = 'JAN'.
         WHEN '02'.
           v_month = 'FEB'.
         WHEN '03'.
           v_month = 'MAR'.
         WHEN '04'.
           v_month = 'APR'.
         WHEN '05'.
           v_month = 'MAY'.
         WHEN '06'.
           v_month = 'JUN'.
         WHEN '07'.
           v_month = 'JUL'.
         WHEN '08'.
           v_month = 'AUG'.
         WHEN '09'.
           v_month = 'SEP'.
         WHEN '10'.
           v_month = 'OCT'.
         WHEN '11'.
           v_month = 'NOV'.
         WHEN '12'.
           v_month = 'DEC'.
       ENDCASE.
       SELECT SINGLE alpha_numeric
                     FROM zpp_serail_no
                     INTO wa_imase1
                    WHERE matnr    = material_no
                    AND   z_month  = v_month
                    AND   z_year   = v_year.
       IF wa_imase1 IS INITIAL.
         wa_imase = wa_imase1 + 000001.
         lv_name   = 'S'.
       ELSE.
         lv_name   = 'S'.
         v_imase   = wa_imase1.
         v_sernum  = v_imase+6(6).
         wa_imase  = v_sernum + 000001.
       ENDIF.
       CONDENSE wa_imase.
       CALL FUNCTION 'CONVERSION_EXIT_AUFNR_INPUT'
         EXPORTING
           input  = wa_imase
         IMPORTING
           output = wa_imase.
       DO number_serialno TIMES.
         CONCATENATE lv_name v_year v_month wa_imase INTO v_string.
         CONDENSE v_string.
         wa_sernr-sernr = v_string.
         APPEND wa_sernr TO tab_sernr.
         wa_imase = wa_imase + 000001.
         CONDENSE wa_imase.
         CALL FUNCTION 'CONVERSION_EXIT_AUFNR_INPUT'
           EXPORTING
             input  = wa_imase
           IMPORTING
             output = wa_imase.
         CLEAR v_string.
         CLEAR wa_sernr.
       ENDDO.
       SORT tab_sernr BY sernr ASCENDING.
       DESCRIBE TABLE tab_sernr LINES lin.
       CONDENSE lin.
       CLEAR wa_sernr.
       READ TABLE tab_sernr INTO wa_sernr INDEX lin.
       IF sy-subrc = 0.
    *    SET PARAMETER ID 'MEM1' FIELD wa_sernr-sernr.
    *    UPDATE mase SET alpha_numeric = wa_sernr-sernr WHERE matnr = material_no.
         EXPORT wa_sernr-sernr TO MEMORY ID 'MEM2'.
       ENDIF.
    ENDIF.

  • Why am I unable to post comments from FF. I can do it from IE, but it takes ages. Virus etc. checked.

    Two problems:
    1. I am unable to post comments from FF, but I can do it from IE,
    though it takes ages with IE. Checked for Virus etc. with McAfee,
    ZoneAlarm and Spybot. FF versions 4 later changed to 12. Both
    do not allow - just keeps waiting (tried up to about 1 hour). It
    started about a month ago.
    2. I am unable to attach .pdf files from FF in Yahoo Mail. It works
    from IE - though it takes ages (script?).
    I am using 'NO Script' from FF - but for most cases I have to
    go to 'partially allowed' mode.
    Thanks
    SB

    (1) As instructed I went to 'run' and typed in the code. It took me to 'xuowtwd1.default' folder under 'Profiles'. There were several files stored there and
    I did not know what to do. Next...
    (2). As suggested I went to 'troubleshooting Information' under 'Help' drop down list.
    (3). Followed instructions, but could not find the 'Reset Profile' button.
    (4). It said the instructions were not for my version (V12) of FF.
    (5). Downloaded V. 14.0.1
    (6). Will not install. As mentioned earlier I am using Windows 2000 (p.s.initial
    complaint)

  • Unable to post on our blog or update our website..

    Please Help!!!!
    Ever since purchasing our AE 802.11n, and installing it for our home use (We have a Dual 2GHz PowerPC G5) we have been unable to post updates to our blog that is hosted through our idisk through our .mac account, and also we've been unable to post updates to our website that is hosted through bluehost.com. Please help!!! We desperately want to update our work, and are unable to... Is it something with the AE that won't allow me to connect to either of this to post??? The internet has been working fine and great, and I can connect to my idisk using finder... I have no idea what to do!!!!
    AAAAHHHHHHHHHHHH!

    Try Web Chat (you need applecare)
    http://www.apple.com/support/chat
    Don't know otherwise.

  • Unable to post cash receipt in cash Journal-FBCJ

    HI All,
    I am unable to post cash receipt in cash Journal-FBCJ. It is showing below error.
    Also i have created Number ranges for 01. Please advice.
    "For object CAJO_DOC2 AMZN, number range interval
    01 does not exist"

    Hi Venkat,
    The steps involved in cash journal configuration are defined at one configuration area
    The steps are :
    1. Create general ledger account for cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash Journal >
    Define gl account for cash journal
    2. Define Document type for cash journal
    spro > Financial Accounting > Bank Accounting > Business Transactions > Cah Journal >
    Define document type for cash journal
    3. Define Number ranges for Cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Define number ranges
    4. Set up cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Set up cash journal
    5. Define business transactions for cash journal
    Spro > Financial Accounting > Bank Accounting > Business Transactions > Cash journal >
    Define business transactions for cash journal
    6. Run cash journal
    FBCJ transaction code to use the cash jounal.
    You should first have the opening balance to carry out any transactions.
    Please try this, this should help you. Any updates please let me know.
    Thanks & Regards

  • UNABLE TO POST OF PARK DOCUMENT

    Dear cons
    i am unable to post park document . At the time of post the document the system gives a messagethat " order price quantites leads to incorrect po history. Note that order qty is MT & ORDER PRICE QTY in %. PL. solve my problem so that i CAN POST THE PARK DOCUMENT.
    THANKS
    NIRUPAMA

    Hi,
    Goto OLMR-->Invoice block> tolarence key--
    >see tolarance keys BR and BW and choose dont check or increse the tolarance limits
    Regards
    S.Baskaran

  • Unable to post cancellation invoice to accounting.

    Hello Experts,
    I have one scenario in which the user has done Order ->Delivery ->Invoice -> Accounting documnent is Cleared. he created Cancellation invoice and trying to post the cancellation document to accounting. but system is giving error message unable to post document because foreign trade data is missing. therefore unable to post the document to account. Document flow is as follows.
    Order - Completed
    Delivey -Completed
    Invoice -Completed
    Accounting Doc-Cleared
    Cancellation Invoice - Missing export data
    The invoice and cancellation was created a year before. and user didn't face any problem while posting normal (F2) invoice to accounting. system did not throw the same error message.
    Now, user want to post the cancellation document to accounting. Kindly let me know what can be done in this case.

    Hello
    You cannot cancel a cleared invoice and post it to accounts. if it is alredy cleared then what is the use of cancellation and what would happen to the payemnt received from customer ?
    you can reverse the clearing done for the invocie , then create cancellation document and post it
    you would also have to open the periods one year back !!
    Hope this helps
    Thanks
    akasha

  • Unable to post a MIGO GI 351 against an STO (Stock Stransfer Order)

    Dear all,
    I hope somebody can assist by telling me why I am unable to post a MIGO GI against a Stock Transfer Order (PO Doc type UB).
    Am getting error msg "Purchase order 45XXXXXXXXX is no stock transport order. Therefore, it is not possible to post a goods issue with reference to this purchase order".
    This PO is definately an STO.
    What am doing wrong?
    Thanks in advance.
    Sheena.

    Hi
    Steps involved in Stock Transport Order:
    1.     Stock Transport Mat. - Material Master to be maintain in both the Plants.
    2.     Stock Transport Mat. - Stock to be maintain in Supplying Plant.
    3.     Create PO enter STPO doc. Type (UB), Supplying Plant, item category (U) then Delivering Plant.
    4.     In Conditions Del. Cost to be enter & Tax not applicable.
    5.     Go to MIGO first do A07 u2013 Goods Issue using 351 (Stock in transit) Mov. Type.
    6.     Then do MIGO A01 u2013 Goods Receipt using 101 (GR for PO to warehouse) Mov. Type.
    7.     Use MMBE see the stock in both the Plants.
    Regards,
    senthil

  • Unable to post 101 against process order

    Hi Experts,
    Here ther is a customised report to post 101 where input is process order no. ,batch and qty where user finds error as unable to post 101. kindly help to resolve.

    Hi,
    I sugest you take a help of your ABAP team, since it is customized transaction to post GR , they will debug the program and give the reason were eaxctly issue is why the posting is not happening.
    Once you get the issue , post back to forum if u find difficulty to analyze it.

  • Unable to POST with TWIN2X2048-6400C4 @800Mhz

    Hi,
    I just bought a new computer system and everything is just fine except that my Corsair
    TWIN2X2048-6400C4 memory is recognized as running at 533 MHz. When I changed the
    settings to 800 MHz and 2.1V (4-4-4-12) as instructed in the memory documentation my
    computer does not POST. Just a black screen, no beeping or anything.
    What should I do, do I have faulty memory sticks or what can it be?
    The memory is described here: http://www.corsairmicro.com/corsair/products/specs/TWIN2X2048-6400C4.pdf
    /Perry

    Yes. I know that it is spec to be able to run up to 2.1v but that doesn't means that you will not over-volt the RAMs.
    1.9v should be enough for your XMS2 RAMs.

  • Unable to post - 29th/30th May 2012

    Hi everyone,
    We are currently undergoing some database maintenance. This has now been going on longer than we predicted, which is why there has been an extended period where you are unable to post new messages - we are working to get everything operational again as soon as possible.
    In the meantime, we apologise for any inconvenience caused by this, and we thank you for your patience.
    Kind regards,
    MichaelS
    Community Manager
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

    As you can tell, the forum is now active again.
    There will be a further short outage in the near future, but we assure you that this will not last anywhere near as long as this one has done.
    Regards,
    MichaelS
    Community Manager
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Maybe you are looking for