Computer will not boot pass BIOS screen, HP Pavilion M7357c

This is a friends computer. I do not know it's history, other than his friend removed the video card and lost it. Well, that's the story getting. I looked on the HP website and on the stickers on the front of the machine to find out what video card it had. The original card was a Nvidia 6200se, 64MB DDR, PCI Express x16. I purchased a replacement card, in an unsealed retail box on eBay. Seller says it's new, he sold 80 of the same, with no bad feedback. The one I bought is an ASUS EN6200TC DDR PCI. The system requirements in the documentation reads. 800MHz processor or higher. At least 128MB system memory (Not sure if this system supports this) PCI Express Slot. Windows 200/XP. I believe the original OS is installed, which should be XP. None of the F keys work while taping them at startup. F1 shows entering setup....., but does not. I removed the CMOS battery and held down the power buttom for one minute. Replaced the battery and still not change. Don't know if the battery is good. There are three 512 sticks of RAM installed with one empty slot. Everything appears to be plugged in. DVD drives, HDD, MOBO, etc. This is my first time posting here.
SOLVED

Hello quickdraw2011. In order to assist you properly, I want you to start by following the troubleshooting on the documents I posted below. It will help narrow down the root cause of the issue if the troubleshooting steps are unable to resolve the issue. Please let me know the results as soon as possible. I'm only here to help!
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443371
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07173
Mario
I worked on behalf of HP.

Similar Messages

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

Computer will not boot after bios update

This afternoon I recieved an urgent BIOS update in much the same format as I have received updates from HP for years. It was accompanied with some other non urgent update.
So I gave the permissions to make the update.
I recieved a notice that the update had been successfully completed and the computer said it was restarting.
The problem is that it never woke up...
After several minutes I manualy restarted the computer.
As the boot began I heard three beeps, and then nothing but a black screen.
I shut down and restarted after several minutes but this time no beeps just black screen.
I figured that somthing must have corrupted the BIOS
I began researching what the three beeps mean. Appearently three different sets of BOIS were used in this model. Different BIOS have different beeps.
Well I sure never thought I would need to write down what BOIS I have...
In my research I have see referances to holding down certain F keys for different BIOS options as I start the computer
If I hold down an F key when I hit the start button the computer emediately shuts off
How can I get to the BIOS to reset or roll back the update? What next?

The box is on the way...
In addition the the methods outlined in the article The Hp tech had me try to start tapping the F 10 key.
Nothing worked...
Hp is sending me a box to return the computer to a repair facility.
Thank you for your timely assistance,
Sparks

Intel iMac will not boot past gray screen

Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.com

I'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz

Computer will not boot up; only rotating wheel. OS 10.7 iMac

computer will not boot up, only rotating wheel. OS 10.7, iMac

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
Re-install if that doesn't work.

Computer will not boot up. a circle with a line thru it appears.

All of a sudden my computer will not boot up and a circle with a line thru it comes up. What is the problem and what can I do to fix it?

Hi, master hunter.
The most common meaning of this symbol is that something in the operating system is damaged. Here is the best resource when troubleshooting this behavior.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
If you prefer us to assist you with this issue, contact us here.
Cheers,
Jason H.

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Computer Will Not Boot

My computer will not boot and it will not enter Safe Mode. I ran the Memory Diagnostic test and it shows that I have a hardware problem. I also tried to restore my computer to an earlier time but it showed an error. I have 1GB or RAM and recently it keeps changing from 512MB to 1023MB. Please help.
Specs (that I know of)
1GB RAM
INTEL CORE 2 DUO 2.43GHz (I'm not sure)
Gigabyte motherboard
OS: WINDOWS 7 ULTIMATE
This question was solved.
View Solution.

try to make shour that the ram is snug and in all th way make shour NOT to jam them in and dont leve a empty slot in betwen them if there craced be shore not to use the in any in the computer check the mother bords slots and the pins on the ram and make shour that theres no dust stuck in there . thats all i can think of hope it works out for u. :^)

Mac will not boot up, white screen with turning gear for hours on end

mac will not boot up, white screen with turning gear for hours on end

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Bios recovery - Computer will not boot up

I have a HP Pavilion HPE H8-1145-SC, my bios will not boot.
I was wondering if there are any ways of changing the jumper setting on the motherboard ( IPISB-CH2) to fix this issue if so how do I do it? or are there any other types of recoveries that I can do.
I have searched the forum for answers and tried some such as taking the battery out and putting it back in but it hasn't worked.

You could not get a boot menu when using a boot disk, any messages on the black screen at the bottom? Could you do me a fav and take a pic of that black screen and post it. I think... not sure yet but this can be your memory.
I would ask for you to preform a memory test using memtest86 but if one disk does not boot this may not either. But still worth a try. If you burn a memtest86 disk and reboot see if it boots into the memory, if not the issue is memory most likely. Do you know how many GB of ram you have installed?
Do you feel like you can opening your case and removing memory dimms? If you have a bad one this may stop it from booting. I hope the memtest86 works cause it would detect that. Windows 7 can boot on 2 GB. If you have say 6Gb than each dimm would be 2GB taking out one at a time keeping one in and see if it boots.
http://www.memtest.org/#downiso
In the window about the first list download the zip Iso and burn it to a CD
** Memtest86+ V5.01 (27/09/2013)**
pre-compiled bootable binary (.zip)
If you feel that this would not work I suggest taking your system to a PC repair shop and have them test the memory.

Blue screen, computer will not boot up

My computer, when powered up gets stuck on a blue screen and will not boot up. I have restarted & held down the shift button for safe mode & it goes to a white screen with a grey apple icon but will not move past this screen. How do I get the computer to boot up?

Sounds like your system is hosed. Try [repairing the hard drive with Disk Utility|http://support.apple.com/kb/TS1417]. Of course, from the sounds of it, even if you get the drive repaired, it may not fix the problems with your system.
Do you have backups? If not, your only priority at the moment should be to figure out how to back up your data, or what data may still be intact if your drive is badly damaged. If you have another Mac, the easiest way to do this will be to boot the machine into [FireWire target mode|http://support.apple.com/kb/HT1661] and copy whatever data you can.

HT1758 Power failure in the middle of a software update and not the computer will not boot up. The computer just has a white screen with a grey apple and just loads non stop.

My iMac will not boot up after a software update. the screen is all whute will show a grey apple in the middle and will look like it is working but nothing happens; this can go on forever.
Does anyone have any suggestions?

Do you have a backup in the form of a bootable clone or Time Machine? Restore that and then try the update again.
Some things to try here (Safe Boot)
http://support.apple.com/kb/TS2570
Another option might be to download the standalone from Apple Downloads on another Mac and try installing it in Firewire Target Disk Mode to the Mac that was interrupted during the update.
http://support.apple.com/kb/HT1661

Help needed on startup. My computer will not boot from the CD drive!!!

Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

Computer will not boot up. I have tried running disk utility and re-installing OSX. It says disk locked

I am new to Macs and have bought a 13" Macbook Pro and a IMac 21.5" 14 months ago. I have only used the Macbook pro about 15-20 times and after upgrading to Maverick it will not boot up. I get the white screen and a spinning circle. I have tried Disk utility repair and even re-installing the OSX, but it says disk locked. I do not recall setting any password protections or passwords. I now have a brick with a lit up Apple logo. If anyone knows how I can bypass the disk lock error or reset the laptop, please let me know. This has not been a pleasant conversion from PC's. Even my IMac blacks out from time to time and both happened right after my factory warranty expired.

The internal drive is malfunctioning. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Computer will not boot pass BIOS screen, HP Pavilion M7357c

Similar Messages

Maybe you are looking for