Computer will not "wake up" when i re open the lid
When i close the lid, the computer will go to sleep. I will leave it there for a min. and then when i try to open up the lid and either move around the track pad or press a key on the keyboard, the computer will not wake up, the screen will stay blank. The light (on the side) will still be lit (but it does not dim in an out - like it normally does when it is sleeping). I then have to do a hard shut down with the computer and turn it back on. How can I fix this problem?
Reset the SMC:
http://support.apple.com/kb/HT3964
Does that make any difference?
Similar Messages
-
My computer will not wake when I press a key or use the mouse....
I have to say that I have a G4 but my question is not getting addressed in that forum and there ae many more users that utilize this one, so sorry for misleading. BUT, for some reason my computer will not wake when a key is pressed or the mouse activated. Any sugestions? Also, does anyone know of a program (shareware or free) that will clean my files and/or hard drive ( i.e. Macjanitor, Cocktail)? Thank you for your help.
As a first step you could try trashing
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
and re-start and re-select your preferred System Preferences - Energy Saver settings.
There are more suggestions here
http://discussions.apple.com/search.jspa?threadID=&q=won%27t+wake&objID=f596&dat eRange=last90days&userID=&numResults=15&rankBy=10001
Post again if it doesn't help. -
Monitor will not wake up when key is touched
monitor will not wake up when key is touched
1.Update your Graphics card driver. Visit the website of the Graphics card manufacturer to download and install the latest driver.
2. Ensure that your windows 8.1 updates to latest.
3. Update BIOS and chipset driver.For this visit the website of your system manufacturer.
S.Sengupta, Windows Entertainment and Connected Home MVP -
Question
MY COMPUTER WILL NOT ALLOW MY COMPANY OUTLOOK TO OPEN IT IS IMPERATIVE THAT I HAVE THIS EVERY ONCE IN A WHILE IT OPENS BUT SELDOM editIf the CD absolutely requires that old version, then it is basically obsolete. However, it might work with the current version ... have you installed the current version of Adobe Reader, and if so what does it say when you try to use the CD?
-
HT4710 iphoto will not close down when i click on the red X button
iphoto will not close down when i click on the red X button
Right (Command) click on the iPhoto icon in the Dock and see if you can select Quit there or if you get an iPhoto not responding message. If you do get that message you'll have to the the ➙ Force Quit... menu option then figure out why iPhoto is stalled.
OT -
My iPod will not delete apps when I hold down the app. Why?
My iPod will not delete apps when I hold down the app. Why?
DELETING APPS
Touch the app and hold your finger down until all the apps start to jiggle. You will see a circled "x" in the upper left corner. Tap it to delete an app. When done press the Home button.
You cannot delete any pre-installed iOS app.
If the app is in iTunes, then you delete the app in iTunes. If you then sync with your iPod the app will also be deleted from your iPod. -
I have been using Firefoz for several months. It will not start now. I click on the icon and nothing happens. I'm running Windows 7.
Did you reinstall from backups, or www.Mozilla.org?
-
Computer will not recognise ipod when connected
This is very frustrating as i have only had my ipod nano for a week and its just won't work. I have loaded the software and everything seems fine until i connect the ipod, then the hardware is not recognised. I have tried exactly the same thing on 2 of my friends computers and it has worked fine without any problems. Therefore i think its something to do with my computer. Iv'e tried loads of tips from the apple site and suggestions but none have worked. Any other clues?
Windows XPTry reading my post "Is your IPOD very slow to connect and eject and it appears to lock-up?". Although it is framed as a question, it is actually a description of a problem and solution I found yesterday.
I've already received two emails informingme that it has fixed the problem for other people.
Hope this helps,
Ernie -
On a desktop PC running Windows XE, FF will not launch. Has been working very well since we installed FF two weeks ago and made it our default browser. IE launches normally allowing me to post this question. On my laptop, on the same wireless connection, FF works fine. I have rebooted several times. Everything seems normal except for FF. I have run PC Doctor and have fixed all problems that came up. McAfee finds no problems.
Update: After a very long time, perhaps 15 minutes or more, the FF screen comes up blank with the "loading..." message on the first tab. Also, because I tried several times to launch FF, more such screens came up with the same result. My home page never loads. If I stop page loading and try another web site I get the same result.
-
Hp laserjet pro color mfp will not wake up when print tasks are initiated!
Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?
These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1 Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
I have three computers. 27" iMac, 11" MacBook Air, 13" MacBook Pro. All my bookmarks are synced with Xmarks. On the iMAc and the MacBook Air, the bookmarks work as they should. The bookmark list drops down when I click on Bookmarks and all the subfolders within the main folders contain the bookmarks I have saved in them. On the MacBook Pro this is not the case for one of my folders. It contains about 10 or 12 subfolders and only 5 or 6 of the subfolders show bookmarks when highlighted.
I have tried uninstalling and reinstalling Firefox and then syncing bookmarks again but the problem still persists. I have checked file permissions and they are set as they should be.
I am now at a loss for what to do.Sorry, that sounds like a question for Xmarks support. You aren't using both Xmarks '''and''' Firefox Sync, are you? We have had a number of support posting about problems similar to what you are seeing when using both.
-
When I open firefox plugin update page appears ,I have done all updates it wanted, but it does not see the Adobe update as being done. adobe is current as per there site.
How do I stop or turn off this problem?See:
* [/questions/832793] -
It appears to not be charged and when I go to plug in the charger the green/red indicator on the connector is not lighting up.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation:
http://www.apple.com/retail/geniusbar/
Best. -
Why will Firefox will not display content when it has loaded the Face Book page?
Firefox (FF) loads the Facebook page but only displays the menu of Facebook. Clicking on menu items does produce results but not the main Facebook page.
*"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
*"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
how to disconnect ipad...won't shut down?
Your welcome.
It sounds like the message you were getting was notifying you that you haven't backuped up via iCloud in a while.
If that is correct, you can fix that:
Settings > iCloud > Storage & Backup > Backup Now
iCloud Backups will run automatically if:
- the devive is charging
- the device is connected to Wi-Fi
- the screen is locked
Maybe you are looking for
-
Mac Mail no longer allows me to make text bold
I'm using Lucida Grande as my default font, and since installing Snow Leopard the command>b no longer emboldens the type. Even if I go to format>style>bold it still doesn't work. Even if I go to format>show fonts and select the bold version of the fo
-
I am using numbers for iPad and am trying to do a if statement. Cell A1 has a value of 2 and cell A2 has a value of 3. If I see if(A1<3) I get true if I do if(A1<A2) I get false... Can I not compare two cell values?
-
ORA-12560: TNS:protocol adapter error with samples
hello, I am trying to run the cdemo1 sample on Windows 2000 but I keep getting the ORA-12560: TNS:protocol adapter error. I have set the correct username and password in cdemo1.c before compiling. I am using Oracle 9i and I have the Oracle Client ins
-
Where do I locate a device driver for my new Ipod so I can upload to it for my windows 7 pctouch
Where can I locate a device driver for my Ipod touch. My PC doesn't recognize it.
-
I had itunes 6.0.5....I never thought about upgrading until I got some gift cards that could only be used if you have itunes 7!!! So I tried to upgrade to itunes 7.0.x and all the installation went great. But when I try to open up the actually itunes