Computer without videocard not boot after 2.6.32 upgrade

After upgrade to 2.6.32 my home server not boot. It boots fine if I insert video card to it. But how to boot it without card?

2.6.32 is still in [Testing], so that is where this topic belongs.

Similar Messages

White iMac will not boot after 10.6.8 upgrade

I downloaded the 10.6.8 upgrade last night. This morning, the white plastic iMac will not boot.
I have tried evey known keyboard option.
I have tried booting from the snow leopard dvd.
I have zapped the pram.
Nothing!
Please, any help would be great.

We bought 2 iMac's 27inch with i7 Quad-core. Did the update a couple of hours ago. My Mac asked to reboot after update, but i didn't accept and worked with iTunes for a while. Then rebooted manually. After reboot it took about 15 minutes to reboot (light-blue screen with nothing on it, not even a mouse). My Wife also did the update of 10.6.8 and rebooted when asked. Her iMac also took 15 minutes to reboot, bus update was unsuccesful! So did update again and then denied reboot and rebooted manually! (Apple-logo and then choose "restart").
When we did that, iMac was very fast and updateproblem was solved! So deny reboot and reboot manually and problems are over. Same deal with 2 brandnew iMac. I'm guessing this is an issue. To much of a coincidence for me!

Computer will not boot after 10.6.8 upgrade

Just did the 10.6.8 upgrade to a computer and not it wont boot. Stuck at the grey start up screen with the apple and the spinning wheel of death. Zapped the PRAM to no avail and reset the SMU and still the same. Any advice?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

Not Booting after recent Security Patch/Java update

My wife has experienced what many have experienced with the recent update.
MacBook not booting after update (i.e. - "I have no name!")
I have tried everything posted on this topic since 2/13/09, but without any success. Does anyone have the fix for this yet?
Things I have tried:
* I can boot in safe mode (holding "Shift" while restarting)
* I cannot boot from an install disk(s) (holding C while restarting) - I have both a black one from purchase, and two gray ones with purchase from MiniMac
* Booting with verbose - gets stuck at same place as everyone else
Operating in safe mode:
* I can run DU and "repair" drive
* I can see and access the CD/DVD
* I cannot see drive in target drive mode (doesn't ever connect the 2 systems)
* I downloaded the update files from apple and reinstalled them individually (via USB ext Drive) with a reboot in between
* I attempted to update & archive, but I cannot run install CD from any systems disks (see above)
Has anyone figured out how to fix this yet?

Same problem than the other guy who is not mentioning the update in the title.
Powerbook 1.67.
System log said "No user defined computer name" and "using blah blah name" or so.
Mac Os X report (for apple) says:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003900FF1C PC=0x00000000008FC020
Latest crash info for cpu 0:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

Windows 8.1 will not boot after setting up dual-boot with Linux Mint 17.1 Cinnamon

In which forum should I ask this question?
After installing Linux Mint onto a partition of my hard drive, Windows 8.1 is listed a choice to boot into after restarting my computer, but will not boot up. It suggests a boot repair and to obtain Windows 8.1 from my distributor. I have seen on other forums
that this has not worked, and I was wondering if anyone here had any suggestions for how to proceed.
Thanks in advance.

You can try them over here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Macbook Pro Will Not Boot After Full Timemachine Restore

Hope someone can help. I upgraded my HD and attempted to restore from time machine. Everything appears to have worked well and the restoration was a success according to what the computer says. However, when I go to reboot I hear the startup sound then the apple pops up on the screen followed by a kernal panic error and the black box telling me that I need to hold down the start button and restart. I've tried resetting the pram, reinstalling from TM again and a couple of other things but it won't start up. I tried doing a clean install and it worked fine then I migrated files from my TM backup and that worked fine as well. However, that's not what I'm looking for, I wanted to get the machine exactly the way it looked before the upgrade and I thought TM was supposed to do that. I've read other forums were people have done it with no problems and am completely stumped at why it is not working. If anyone can shed some light I'd appreciate it.

I booted with the CD and after selecting the language, went to the utilities pane and used the partition feature.
Last night in desperation, I booted back to the CD and once again told it to do a full restore from TM. This was the third time that I had done it so far. The previous two times I had gone into the partition feature and partitioned the drive first. This time I skipped that step and just told it to restore from TM. It said if it did this it would erase everything on the drive. I agreed and let it do its work. This morning it once again, as in both previous times, said it had restored from TM successfully. I told it to restart and lo and behold, it booted and everything is just as I had it on the other drive.
Needless to say, I'm confused but happy. I just wish I knew why it would not boot after restoring the previous two times? Maybe it just wanted me to spend more money:) I tried booting today only after I had gone to frys electronics and bought a SATA to USB cable and cloning software.
Anyway, thanks for your help and if anyone knows why it wouldn't boot, let me know. It would be good to know for the future just in case. For anyone else having this trouble, keep trying. Third time was a charm for me.

Power Book G 4 wil not boot after oz update Snow leapard os

Power book G4 did not boot after Lastesat Mozilla update, Runing snow leapard, message updatenis not compatable with computer tried to delete update, and will not boot from then on?

You can't run Snow Leopard on a PowerBook G4.
Please straighten your story out.

My mac book pro is not booting after sleep

My mac book pro is not booting after sleep...Pls anyone help me!!!

Hello adibah2731,
We've an article that proivdes a host of useful tips that can get your Mac booting up again.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers,
Allen

My Laptop B490 not booting after bios update

My laptop not booting after updating bios i used windows 8 OS.
I downloaded Bios from following link.
Bios Download Link
After updating bios, system restarted automaticaly, after that only power led is glowing, screen stays blank.
Help me solve it.
Solved!
Go to Solution.

hi sathish291
Welcome to the Forums.
Can you try the following:
1. Power down the machine, remove the AC adapter and battery.
2. Hold the power button for 30secs and reconnect the AC adapter only then turn the computer ON.
If the machine still doesn't power up normally and boot into WIndows then it's likely that something went wrong (could be a bad BIOS flash or an internal component might have gone defective during or after the BIOS update). In this case, you may need to contact lenovo on how to go about getting the unit serviced.
Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

Dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?

dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?
It lights up initially for a split second when I push power button, but does not continue to boot up. When ac adaptor is put in it glows blue like it is supposed to. Any suggestions?

i'm going to try to see if a different ac adaptor will work hopefully that solves the issue.

Computer without videocard not boot after 2.6.32 upgrade

Similar Messages

Maybe you are looking for