Computer wont exit out of on line progrmas

When I try to click out of a program on line the red X at the top right of screen won't work. Sometimes if I minimize the program and click the E at bottom left it may exit after several tries. This never happened until I moved. I am using same computer and same cable company. I am not savvy with computers but I do know how to close out properly - just not responding most of time lately. Any ideas that are easy fixes?

To force close iPhoto, press Alt, Command and Esc keys, choose iPhoto and force close it. Then, restart or turn off your Mac.
The reason why iPhoto appeared after restarting was because OS X Lion and newer Mac OS X versions restore opened applications the next time you start up your MacBook

Similar Messages

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer

Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup.

Firefox won't close down all the way after watching a video. I exit out, and the sound continues. When I try to re-open firefox, I get a message about how I have to restart my computer. How do I fix this?

Basically whenever I watch a video and I exit out of the video I have to restart my computer to get Firefox back open. If I exit out or go to a new page while the video is playing, the audio continues like nothing has happened. I've checked my task manager and it shows that Firefox is closed. When I try to re-open Firefox I get an error message that tells me Firefox is running but is unresponsive and I have to restart my computer. How do I get it to stop doing this?

Try holding control, alt and delete down in succession and then a dialogue box will appear with windows task manager. Once open click on the Processes Tab and look for firefox.exe. Highlight this and then click end process. It should come up with a warning but just click Yes. This should then close firefox and allow you to reopen it from your desktop without shutting down your computer. Hope this helps.

I left a dvd in my macbook pro for a while and now my computer wont recognize that there is even a disk in there, nor will it eject it. how do i get the dvd out?

i left a dvd in my macbook pro for a while and now my computer wont recognize that there is even a disk in there, nor will it eject it. how do i get the dvd out?

Hold down the mouse button or trackpad clicker as you start up.
If no joy, restart and hold the Option key. This brings up the Startup Manager, which will draw an Icon for each bootable Volume. When all are drawn, the Eject key is "live".

Pod resored noiw computer wont recognise it tried 2 different pcs what con i do to fix ipod it is in recovery mode tried exiting but wont work

ipod resored noiw computer wont recognise it tried 2 different pcs what con i do to fix ipod it is in recovery mode tried exiting but wont work

ipod resored noiw computer wont recognise it tried 2 different pcs what con i do to fix ipod it is in recovery mode tried exiting but wont work

IPod Classic won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore?

iPod won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore? Is anyone else familiar with this problem? It had over 25 movies, thousands of songs & hundreds of pictures, and it seems like they're still on there, because 74gb are used out of the 80 but when I turn the ipod on it appears to be at factory, fresh out of the box settings and my computer wont recognise it at all...

For the following suggestion, when you connect the iPod to the PC, and iTunes open up, please close it, before you fix the drive.
Your iPod hardisk filesystem is corrupted, and maybe repaired by using command line, under DOS window.
chkdsk drive: /F
where drive: is the iPod ID D: or E:
You can also try clicking the IPod properties, and run error checking in GUI, tick "fix all error."
If you have access to a Mac, you can use DiskUtility, and run FirstAid to repair the iPod.
Good Luck!
BTW, this problem arise because, iPod did not complete, closing, the Sync process, due to timeout, for Windows systems, I think it is maybe caused by Antivirus, or some other plugins, trying to make windows 7 look like Mac OS X.

Cant exit out of apps ; home button doesnt work , how do i fix it?

i cant exit out of anything , my home button wont work,

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT1349 i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Exit out of video and return to stage frame 1

Ive manged to create a flash player that incorporates a video
using a online
tutorial with the code below.
All is working well but at the end of the video I want to
exit out of the
video and return to the stage at frame 1. The reason being
is; before a user
hits play an interface image (containing info) is displayed.
When they hit
the play button the video appears and plays over the
interface image.
problem is at the end of the video the layer containing the
image is still
covered by the video. when the video finishes I need a line
of code to exit
and return the player to the original state without the
presecence of the
video layer.
any ideas? thanks in advance
Brett
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
rewindButton.onRelease = function() {
ns.seek(0);
ns.play();
playButton.onRelease = function() {
ns.play("modular.flv");
pauseButton.onRelease = function() {
ns.pause();
var videoInterval = setInterval(videoStatus,100);
var amountLoaded:Number;
var duration:Number;
ns["onMetaData"] = function (obj) {
duration = obj.duration;
function videoStatus() {
amountLoaded = ns.bytesLoaded / ns.bytesTotal;
loader.loadbar._width = amountLoaded * 200;
loader.scrub._x = ns.time / duration * 200;
var scrubInterval;
loader.scrub.onPress = function(){
clearInterval(videoInterval);
scrubInterval = setInterval(scrubit, 10);
this.startDrag(false,1,this._y,198,this._y);
loader.scrub.onRelease = loader.scrub.onReleaseOutside =
function () {
clearInterval(scrubInterval);
videoInterval = setInterval(videoStatus,100);
this.stopDrag();
function scrubit() {
ns.seek(Math.floor((loader.scrub._x/200)*duration));

Inside the videoStatus() function Check the Current Time and
Total time for video completion. Some time the Video doesn't have
exact Time when comparing to the Total duration so use Math.floor
to compare. if you still facing problem also check the Buffer
status and Video status too.

Possible to use both optical out AND regular line out at the same time?

I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
It will not support more than two-channel audio.

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.

Updated my Ipad and now it wont get out of recovery mode.

I have an Ipad 4 and I decided to download the latest update for it.
The download is fine until i pick it up a half hour later and it shows me the recovery mode image. Basically telling me to connect to my computer.
I go to my computer and plug it in, but then my itunes says that in order to connect I have to restore my Ipad.
I very rarely connect my ipad to my computer, and since the last sync I have reinstalled Windows 7, so its essentially a new computer and doesnt recognize my ipad.
Doesnt restore reset my ipad? I have all of my notes from my classes this symester. I cant restore!
No matter what I have done the ipad wont get out of recovery mode.
So please I need help!!
How do I get out of recovery mode?
If I cant, then dose restore wipe my files? (I dont have a backup, i rarely use my computer now, i just use my ipad)

A "Restore" WILL erase your files but you can save them. Read closely before you start.
Connect via cable to the computer that you intend to use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.

When I closed out of yahoo email, get a blank page on every tab if any are opened. I have to exit out & restart firefox . It does not happen w/any other browser.

When I sign off on yahoo email. I get a blank page on every tab if any are opened. I have to exit out & restart firefox . It does not happen w/any other browser. I have no malware or viruses. Please advise.

Actually, it's not obvious & common sense would dictate that users' bookmarks would not be left stuck to random computers even once they've logged out of the account. No one wants that if it's a public work computer or if they're traveling & use an Internet cafe. As I am not the only one who has noticed this issue or had bookmarks disappear/be deleted, in addition, common sense would indicate it's not really a very good system. And carrying around a flashdrive to run Firefox off of it is a good solution? Really? Just curious why a useful feature such as being able to login & use your preferences & bookmarks & then logging out removes your preferences when you're gone hasn't been developed. Yahoo keeps my preferences when I logout (it's called My Yahoo!). Maybe a My Firefox or My Chrome solution could be developed.

Computer wont recognize iPhone 3G

So situation is as follows. READ VERY CAREFULLY BEFORE RESPONDING!!!!
So i got iPhone 3g from a finnish Apple forum and it worked perfectly untill today. I tried to re-install the phone and i got 1600 error on iTunes, and phone got stuck on DFU mode. So i took the phone out of my PC and plugged it back in, but nothing happend. My computer wont even play the sound when i connect new device and my Power/Sleep button is broken on that iPhone. Is there any way to force it to work or should i just get new phone? (It will like 250-300 euros on my operator *** i know?!!?) I think the phone is still on so should i wait the battery run out or what? Any succestions? And i have tried all my other PC's. But before it did this, my PC warned about some slow USB when reseting iPhone software. So i did something wrong or is it phone fault? Please help me this is my first iPhone. iOS is 4.2.1

sad. Thanks for sharing, though.

I need basic help on filling out an on line form.

I have used Adobe Acrobat to fill out forms on line, and it was always a no-brainer (set up that way by the author, I'm guessing). So I never explored the details of how it works. I am trying to fill out forms for an upcoming doctor appointment, but am unable to type on the lines. I did a bit of reading and then tried to use the "typewriter tool", but could not figure it out. I looked at the properties of the document, and the author marked "allowed" on the form being "fillable", so I thought that meant answers could be "filled in" on the lines. In the past, I've noticed that documents I could type on had light shading on areas I could type. This one doesn't. I'm not sure if I need to purchase Acrobat software or some other software to do this, or what I need to do. Can anyone help?

Well... thats actually my problem... I can't seem to wrap my brain around
readet and acrobat, and if you have to buy acrobat or what... It, seems
like, its on my laptop already, but I don't know how to figure that out...
I found my way to a site where you can get a "free account" and, I
registered, but I'm just mystified by the whole thing. I will ask a
computer geek today to help me learn what I have and how to use it.
Meanwhile, I answered everything on a separate word doc and saved it with
the forms onto a cd... at least it will be easy to give em the cd to get
the info into their compiter, and they or I can merge the answers onto the
forms they want fo a paper chart. Thanks, for the info, anyway!. Have an
awesome day! xxoo, I'll b n touch so in case I have more trouble... A

Computer wont exit out of on line progrmas

Similar Messages

Maybe you are looking for