Computer wont recognize ipod nano

whenever i plug in my i pod it charges but my computer says unknown device and unrecognizable does anyone know how to help please

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Similar Messages

  • Computer wont recognize ipod in disk drive J!?

    I recently recieved my Ipod Nano for my birthday, and everything was going as planned until I came back from vacation 2 weeks ago and tried to put more songs on my Ipod.
    Once I put my ipod in the connecter which I had been using for the past 3 months, Itunes never came up so I clicked on it and my Ipod was not listed on the lefthand side.
    I went to the apple websited and completed all of the 5 R's and still nothing.
    I also went under "My Computer" and saw that disk drive J(the ipod drive) was said to be empty, but yet my ipod was plugged in and the screen on my ipod was blinking and said do not disconnect, like normal.
    I checked the back of the connecter and the computer and i made sure everything was in tight, but still it claimed drive J, my ipod drive, was empty. Meanwhile all my songs were deleted somehow. I'm not sure how to fix this because I have uninstalled and reinstalled everything and yet nothing has helped!! Someone please help me out, i need my Ipod to work!! Thanks alot!

    Try changing the drive letter?
    For info, here's the link to the Microsoft Help and Support page:
    New drive or mapped network drive not available in Windows Explorer
    http://support.microsoft.com/default.aspx?scid=kb;en-us;297694
    Regards,
    Colin R.

  • Select button unresponsive and Windows wont recognize iPod Nano 2g

    My second generation 4GB iPod nano is not being recognized by Windows. I cannot reset it because the center select button is unresponsive. The other buttons and click wheel still work. Also, even when it is unplugged, it has the "Charged" screen, indicating that it does not recognize when it has been unplugged, therefore, it will not even turn off.
    Any suggestions?

    tey pressing the play pause button or menu button or put on hold then take hold off

  • Computer wont recognize ipod mini + mini displays low battery and sad icon

    ok so my ipod mini wont get recognized by itunes or windows and when i hook it up to the computer it displays a low battery icon and when i take it off it displays the apple icon for 7-8 seconds and then shows the unhappy face icon
    ive tried ressetting it and everything
    help

    See these troubleshooting articles.
    My iPod is sad.
    What does this picture on my iPod mean?
    Also, there is a pretty comprehensive post written by another forum member which is about the sad iPod icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
    The Sad iPod icon.

  • Windows 7 computer wont recognize ipod classic but itunes will pick it up.

    ive been trying to transfer music from my ipod classic to iTunes library and ipad but iTunes wont let me back up ipod classic plus computer doesn't show ipod in computer settings.
    help
    thanks

    Try:
    iOS: Unable to import photos to computer

  • Computer wont recognize ipod

    I just got a new laptop and it will not recognize my ipod plugged in the usb. Went back and tried old desktop and it will not recognize either. Any ideas why?

    When you plug it in, does the iPod's screen change to indicate that it is connected (and/or charging)?
    The latest iTunes may hide the sidebar.  To show the sidebar, from the menau bar, under View, select Show Sidebar.
    With the sidebar visible, when you connect the iPod, it does not appear under DEVICES in the sidebar?

  • Computer wont recognize 2nd generation nano ipod

    I have a 2nd generation ipod nano, and my computer wont recognize it. I plug it to my laptop and nothing pops up. i have tried connecting it to another computer but it wont recognize it on that computer either. i have no idea what is wrong with it. Can anyone please help. Thanks in advance.

    I changed my PC. I Use indows 7 64 bit. Which is the software which I have to download for my iPod Nano Model A1199, second generation?
    Message was edited by: Christian43

  • ITunes doesn't recognize IPod Nano 7th Generation

    ITunes doesn't recognize my IPod Nano 7th Generation. I get a message saying "An IPod has been detected but could not be identified properly". My Windows 7 computer shows the IPod Nano as a removable drive until I launch ITunes at which point it disappears from the list of removable drives. I even disabled my security software (Norton 360 but not Spybot S & D) and it didn't solve the problem. Any suggestions..............Thanks

    Hello Aruniem,
    The article linked below provdies information and steps that can help resolve this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • Windows AND iTunes wont recognize my nano please help!!!

    This makes no sense!!! my dads computer wont recognize my ipod or charge it up but my moms will and dad has iTunes! please help me!

    If you have also gone through the other applicable steps (and that are possible) in that article, all I can suggest is posting in one of the Category: iPod forums .
    Good Luck!

  • How can i download music from my computer to my ipod nano without erasing music already there?

    how can i download music from my computer to my ipod nano without erasing music already there?

    If the music you are wanting to have on your iphone was purchased through itunes you can then go to your front display to settings>itunes and app store from there you have a toggled switch that allows you to automatically download music and apps by toggling the switch. You will need to toggle the switch below these switchs that allows for cellular data to be enabled if this has not already been enabled. This then will automatically download music and apps directly to your device with no additional charge to you.
    Good luck.

  • I left a dvd in my macbook pro for a while and now my computer wont recognize that there is even a disk in there, nor will it eject it. how do i get the dvd out?

    i left a dvd in my macbook pro for a while and now my computer wont recognize that there is even a disk in there, nor will it eject it. how do i get the dvd out?

    Hold down the mouse button or trackpad clicker as you start up.
    If no joy, restart and hold the Option key. This brings up the Startup Manager, which will draw an Icon for each bootable Volume. When all are drawn, the Eject key is "live".

  • My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this???

    My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this??? the weird thing is it use to work until yesterday. thanks

    Will it charge when connected to a wall outlet? The USB port on your computer must be 2.0
    Powering Apple and third party peripherals through USB

  • HT1349 Just popped a cd into my IMac (10.68) in order to look at some very important images I just had scanned. The computer wont recognize the cd, nor will it eject it. any suggestions? (besides shaking it and throwing it across the room :-)

    Just popped a cd with important images into my imac. Computer wont recognize it nor will it eject it.
    any suggestions?

    Restart the computer with the mouse button held down.  This will force an optical drive eject.

  • Computer wont recognize voice commands

    I have been trying to calibrate my computer for voice commands, even when I am able to say the command examples and get my voice to the green but try for real my computer wont recognize any or most of my commands in any way either by holding a key down or saying a key word before commanding. I have an oklahoma accent but still my accent is not heavy. Any solutions?

    In the Speakable Items window, click on the purple circle w/the black "?" mark in the middle. That is a Help button.
    If you do not find a solution on the window that opens, make sure you click on the links at the bottom of the window:
    *Adapting speech recognition to your environment*
    *Using spoken commands to control your computer*
    Consider updating your OS to the last Leopard version which I believe is OS 10.5.8. Your current OS is outdated.

  • My play lists do not sync from my computer to my ipod nano.

    my play lists do not sync from my computer to my ipod nano.

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

Maybe you are looking for

  • How do i move an app from one page to another

    how do i move an app from one page to another? When I upgraded to the latest software on my 4s, the camera went to the last page rather than remaining on the home page

  • Installed itunes and now cant see my cd stations on my computer

    so first off thanks for forceing me to install this virus on my computer that completly caused tons of problems for me. So the problem i have is that i installed Itunes and now i cant see my cd stations i tryed to update the drivers and it doesent wo

  • Book Module in LR 4.4

    I am making a book in LR 4.4  It is Standard Landscape; 98 pages. In the drop down menu for Covers; Soft Cover is not an option. Why is that? I want have a soft cover for this book. Txs Robert

  • AT-MIO-16E10

    Hi I am using the above card for acquiring data simultaneously on 4 channels. I have written both labview as well as Visual basic codes for this. I see that the maximum sampling rate given for the card (100 kS/s) is shared between the channels - I ge

  • XPS 8500, AMD Radeon HD 7870, TF2 Crashes

    Team Fortress 2 crashes my XPS 8500. I have an AMD Radeon HD 7870. It always crashes, ALWAYS. There are wild audio and screen artifacts associated w/ this. Often the card dies and I get a message that the card failed but then recovered. The game whit