Computer wont work after full recovery

Hi, my computer wont start up. I have recovered it back to factory twice & it worked fine after each but only for a day, then same old problem back of not starting.
I have done an FULL smart test on Hard drive but it says 'passed' (no fault).
I have done diagnostics numerous times (5 or 6) and it passes all tests apart from once it said error code biohd-4 but after second recovery this hasnt come back??
I understand that if it was permantly giving this fault code then it would suggest hard drive but is it possible it could still be hard drive without this fault code showing??
Would really appreciate your help here as this is so time consuming & is driving me nuts!!

Hello,
What is the computer model that you have, can you please let me know?
The HDD might not be dead, but would need that info.
Can you try to remove the ac adapter and keep the power on button pressed for 30 seconds? Then turn the PC on again.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

Liquify filter in photoshop cc still wont work after full reinstall

halp.
macbook pro running osx 10.8.4
8 gig ram.
I've uninstalled all adobe software, used the adobe cleaner, reinstalled the applications manager. nothing works.

When you say nothing works, what exactly does that mean? Does the Liquify dialog come up? Can you see a preview? Does the filter crash Photoshop? Had it been working before? Did it stop working after a Photoshop or OS upgrade? Also posting your Photoshop system info would help to figure this out.

Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Mac mini screen wont work after lion

My hdmi connection to my tv wont work after installing lion last night. It worked once last night but hasnt worked since. All cables are in tact and computer is set up the same. I cant even see anything to fix it!

I called apple - I'd have been in trouble if my mac had been my only internet access!
I had to reset the P-RAM
as so:
mac is powered off
turn on power then instantly press keys: command option P R
the mac will chime as usual then on the second chime let go of the keys.
After this my screen worked again.
For info - command key is cmd, option key is alt
I did this with an old mac wired keyboard - not sure if it will work on bluetooth keyboard, but it might.

My itunes wont work after update

my itunes wont work after update. whats the problem.

also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

Messages wont work after I received a very long text

Messages wont work after I received a very long text, it keeps freezing up and wont even let me delete that very long text.

Remove Messages app from Multi Tasking and make a Reset.
(Press and hold the Sleep/Wake button and the Home button together for at least ten seconds,
until the Apple logo appears.)

Headphones controls wont work after upgrading to ios5?

Headphones controls wont work after upgrading to ios5, has anyone solved this problem?

ajkula66 wrote:
Secondly, what is the 7-character model number of your T40 so we can point you to correct wireless drivers..237?-???
Goo00oogle, you forgot the other 3 digits
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system

HI,
LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system.
I had LR 5,7 running and was not installed via the CC.
What to do
Thanks.

Hi Ridder,
Please refer the solutions given in the following article.
Lightroom doesn't launch or closes automatically after splash screen
Hope this helps.
Regards,
Sumit Singh

Ipad apps wont work after downloading update 5.1.1

My I pad apps wont work after I downloaded OS update 5.1.1
I have tried restoring, but it doesn't solve the problem.

Hi
I had the same problem since I updated, the iPad shows "No Sim" I have taken it out, put it back in after cleaning it! All the usual possible solutions that everyone else has tried? So I have not been able to connect for over a week now and I intended to pop into the Apple geek guys to let them have a look, but was scared that they might suggest it would have to be sent away!!! What would I do?. So last night I was fiddling around with the IPad and thought I would try something, AND GUESS WHAT! It works!!!!
This is what I had done
1. Take the SIM out of the IPad
2. Leaving the SIM out, turn the Ipad off using the Home and power button at the same time, do this 4 times
3. Now insert the SIM back in it then found my SIM
I cannot confirm the is the ultimate cure, but it worked for me and I have tried all the other possible solutions, it's worth a try?
Barlow2012

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Computer wont start after restarting from windows 8.1

earlier to day i updated my windows 8.1 laptop.after it restart the screen say preparing windows for you, but it been like this for 3 hours. i tried turning it off and back on but still wont work. it doesnt show a error message and my brother think its
a troubleshoot

Sometimes the migration takes very long time. It depends on the capability of your computer. Low power means long time.
Regards
Milos

Windows Installation Error after Full Recovery

Hi,
I upgraded a Satellite A135-S4656 from a 160GB hard drive to 320GB hard drive. I did a full recovery with the recovery cd's. At the end of the recovery, I the following message:
"Windows setup could not configure windows to run on this computer's hardware"
After saying ok to the message above and rebooting. I get to the Windows Vista splash screen and then i get the following message:
"Windows could not complete the installation. To install Windows on this computer, restart the intallation."
I ran the recovery once again and went through the whole recovery - still get the same messages.
Your help with this will be appreciated.
Hard drive info
Toshiba 320GB 2.5 SATA HDDR320I02X

if you know how to partition the hdd try to split that hdd into two 50/50 and re-run system recovery again.
=========================================================
the only easy day was yesterday.....
=========================================================

Scan to computer not working after installing wifi booster

working with windows 7 and hp 6515 - just installed a power booster and printer no longer finds computer when try to scan to computer

Hi @Eflyer,
Welcome to the HP Forums!
I see that your scan to computer is no longer working after installing a wifi booster, with your HP Photosmart 6515, on Windows 7. I am happy to help you with this connection issue!
Please see the following:
This YouTube video on extending the wireless signal. Extending Wireless Network Range.
This scanning guide, A 'No computer found' Message Displays during Scanning.
Most likely it just needs to be reconnected to the proper network.
Hope these guides help, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Coldfusion 11 Developer wont work after local machine restart

I'm brand new to CF. I've installed CF 11 Developer & attached to IIS. I'm on a windows 7 machine. Every time I have to restart my machine for whatever reason, the CF Administrator wont work, nor will any CFM page work. I have to completely uninstall CF11 & then reinstall it in order for it to work again. Any ideas or suggestions as to what might be causing this behavior? Below is the error message I receive when I try to hit CF Administrator:
HTTP Status 500 - ROOT CAUSE:
type Exception report
message ROOT CAUSE:
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: ROOT CAUSE: coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Monitoring service is not available. at coldfusion.server.ServiceFactory.getMonitoringService(ServiceFactory.java:223) at coldfusion.CfmServlet.service(CfmServlet.java:199) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source) coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
note The full stack trace of the root cause is available in the Apache Tomcat/7.0.52 logs.
Apache Tomcat/7.0.52

Thanks, Anit. Honestly, I am unable to determine if the service is running. I"m assuming it is not based only the fact that no cfm page is returning. Could you share with me best practice to determine if service is running? Also, I'm not aware of the hf1100-3776060.jar. Is it a patch that I need to drop in my Coldfusion installation?
Thanks so much for your assistance. This is the 3rd time today I've had to uninstall/reinstall the service.
AB

Computer wont work after full recovery

Similar Messages

Maybe you are looking for