-computername works for one computer but not multiples

Hello,
I am new to powershell and I am trying to run a basic command:
Limit-eventlog -logname Security -computername server1, server2 -maximumsize 6400KB
My computer and the two servers are both running powershell 4.
If I remove one of the computernames the command works fine...it doesn't matter which one, each one will work, they just won't work together.
The error message has nothing to do with the servers though:
"Limit-eventlog: the value supplied for MaximumSize parameter has to be in the range of 64 KB to 4GB with an increment of 64KB.  Please enter a proper value and then retry".
It doesn't matter what value I try (64 KB, etc )it is always the same error with both servers.  Remove one server and the command runs fine.
What is the proper syntax to use for multiple servers?
thanks

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, I recommend you post the question to the powershell forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • HELP!! WRT54G2 works for one computer, but not for the other

    I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

    As your one computer is working fine then there is no problem with the router so far...
    The computer which is not working...check the IP Address on that...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • Airplay works for one user but not for another on the same machine

    I have the problem where airplay works for one user but not for another and both users are on the same machine.  For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted.  I have tried restarting the Airport express, restarting iTunes, repairing disk permissions.  Any ideas about what can be done to resolve this?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • Classic - text ringtones work for one contact but not for others

    Just got the new Blackberry classic.  I'm having trouble with the ringtones for the text messages.  The custom ringtone works for one contact but not for the others.  I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A.  B sounds the default ringtone from the default profile instead of the custom ringtone.
    I have deleted all contacts and done a re-sync thinking something was corrupt.  That didn't work. 
    None of the contacts have a link. 
    I have changed the notification profile and it still doesn't work. 
    I have deleted a contact and recreated it manually.  It still doesn't work. 
    I finally deleted my dad's  contact and from the phone app created a new contact.  I set a custom ringtone for him and it worked.  I of course had to recreate all his other information manually.  Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
    I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone.  Also contact A has no hypen in the phone number and it rings the custom ringtone.  So that didn't seem to matter. 
    I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution. 
    Surely someone has found a fix for this issue.

    Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
    Note that the iPad cannot send SMS messages.

  • Safari works for one user but not another on same computer

    MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
    Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

    HI Bob,
    You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
    Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
    208.67.222.222
    208.67.220.220
    See if that helps.
    Carolyn

  • Implicit read with assembly module instance working on one computer, but not another

    Hi,
    I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
    I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
    When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
    I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
    Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
    LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
    Any ideas on why this is happening?

    I'm pretty sure we're using a generic ethernet module:
    I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
    We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
    Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period    Possible reason(s):  Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
    I can't figure out what's causing this all of a sudden, could these issues be related?

  • Ipod works on one computer but not the other?

    Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

  • Magic Mouse One-Finger Swipe Works for one user but not the other

    For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • Flash not working for one user, but not another on this CPU

    Hi,
    For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
    I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
    Are there permissions or libraries I should trash to try to restore this capability?
    thanks,
    Steve

    HI,
    For user A on my computer
    Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
    Uninstall Flash
    Install the most recent version of Flash here.
    Now repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    You may also need to delete the Flash cache. Instructions here.
    http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
    If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
    Carolyn

  • Synaptics touchpad on 4540s works for one person but not another

    The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes,  she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.  
    She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.  
    Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

    A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

  • Script works for one frame but not another

    I set up 2 keyframes, each one loads a different text file
    into a dynamic text box. The text box for the first keyframe is
    named "session" and the text box for the second keyframe is named
    "oneptq". The text file for the first text box is named Titles.txt
    and the text file for the second keyframe is 100Q.txt. The code I'm
    using is identical (except for the respective names of the text
    boxes and text files) but for some reason the text will load in the
    first text box but not the second.
    Here's my AS for the first keyframe:
    lvLoader = new LoadVars();
    lvLoader.onLoad = function(success)
    if(success)
    session.text = lvLoader.textbody;
    lvLoader.load("Titles.txt");
    And my AS for the second keyframe:
    lvLoader = new LoadVars();
    lvLoader.onLoad = function(success)
    if(success)
    oneptq.text = lvLoader.textbody;
    lvLoader.load("100Q.txt");
    I can't figure this thing out. Please help. Thanks.

    Have you double checked that it's a DYNAMIC text box? Maybe
    it was accidentally swapped by to static at some point...

  • My home share is not working i have tried everything it works on one computer but not the other help!

    I have tried uninstalling and reinstalling itunes i have tried messing with my avast and I cant get anything to work please help me! it works on another computer in the house but everytime i try to click on his library it says it loading his library and then stops and goes to my music. plz help!

    When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
    You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

  • GarageBand - Controller's Foot Pedal (in AUSampler) works for one track but not for another

    I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
    The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
    I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
    I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
    Any clues?
    Many thanks in advance.

    HI Bob,
    You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
    Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
    208.67.222.222
    208.67.220.220
    See if that helps.
    Carolyn

  • ICal Subscription Works On One Computer But Not The Other

    I subscribed to a web based iCal subscription. The subscription refreshes on my Mac Mini but not on my desktop, which is connected to my iPhone. The iPhone therefore doesn't get the subscription contents either. I've tried deleting and resubscribing but nothing works.

    Hey Valenz0711,
    That definitely sounds frustrating. There are a few different reasons it may not be working on the iMac (iTunes is not up-to-date, Firewall Settings). The following article may provide more information on a resolution:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Thanks,
    Matt M.

  • Keyboard works on one computer but not the other

    I have an aluminum wireless keyboard that came with my Mac Pro (Early 2008). Some time ago, it just stopped working. I tested the bluetooth mouse and a few other bluetooth peripherals to check that it wasn't the Mac Pro's bluetooth that was malfunctioning. I was convinced that the keyboard was broken, and was about to take it to the Apple Store to get it fixed when I thought that maybe I should test the keyboard on another computer. When I did that, it worked perfectly, but it still does not work with my Mac Pro. I've tried changing the batteries and removing the pairing from my Mac Pro. When I try to re-pair it, the Mac Pro is unable to discover it. Thank you in advance for your help.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

Maybe you are looking for

  • PO printout not coming out properly

    Hi all, In my scenario by mistake PO was created without any output mesage and it is further processed to migo & MIRO. now i have manually added output message to PO to take print out of it. but when i m checking its print preview or taking printout

  • How to access the currentPage and currentNode Objects in a Sling Servlet

    I have a requirement to write a Sling Servlet instead of regular CQ5 JSP In a standard CQ5 JSP it's easy to use the currentPage and currentNode objects, as they are automatically added by the default includes <%@include file="/libs/foundation/global.

  • Web archive files

    does anyone know how i could get web archive files into FCE?? they are documents that are public domain from a website and i want to use some of them in my prod but FCE says ''unknow file type" i tried text editor "save as" but only get web archive.

  • Deleted mailbox in mail.app

    Hi, i current had a problem with my mail.app, where all the mailboxes got deleted from my mail.app. When i went to the preferences>accounts it didn't appear a single account there, and before i used to have 5 diff accounts logged on my mail.app. I ju

  • Website a mess in IE5, 6, 7

    Its the typical story, the website I am working on looks great in Safari/Firefox, but doesn't seem to render the same in IE5-7, most notably the nav bar is out of place. How can I fix this? Should I even care about IE5 and 6? Attached is the CSS code