Computers not networking
First off, I never imagined networking could be so hard.
I'm trying to wirelessly network my laptop and my desktop through a Linksys WRT54GL. Neither computer can 'see' the other one, despite them being in the same workgroup.
I managed to get them networked through a WRT54GC earlier using Network Magic, but its performance was sparatic at best, and the best file transfer speed I got was .4 mbps. I was hoping a new, better, router would help out, but it hasn't so far. I would like to not use Network Magic if at all possible. Any help or suggestions is appreciated
Okay, earlier today i was playing around with stuff, trying to troubleshoot the error, and I turned the Network Browser from 'FALSE' to 'yes' in the registry. Now, both computers could see each other, but I get an error message on my laptop that says:
"\\Media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The network path was not found."
Somehow, inbetween not doing anything for a couple hours, my media server lost a little ground, and now gets an error that is mostly the same as the first, except in place of the computer name is the name of the workgroup, and the last line is as follows:
"The list of servers for this workgroup is not currently available"
Both firewalls are off (although when they were on they were both set to enable file sharing) and the internet connection on both is perfect.
Any ideas?
Similar Messages
-
Best method to synch addy book from two computers not networked together?
I have two Macs, un-networked, and two diff. operating systems. 10.2.8 and 10.3.9. What is the best way to synch em' up on a regular basis? Thanks.
first let me say i dont know if there are any compatability issues with address book in 10.2 and 10.3. I suspect there may be. If not…
get a .mac account - which of course costs
You could alternatively buy some syncing software ( unfortunately there doesnt seem to be any freeware syncing options) and use sometype of transfer medium (usb thumb drive?) -
Hi,
I'm having problems with a WSUS configured on a Windows Server 2012 R2.
The computers take and install the updates but in console they appear as
Not reported yet (different type of operation system - Windows 7, 8, 8.1, Server 2008, 2008R2, 2012 and 2012R2).
I've tried to delete the computers from server, wuauclt /resetauthorization /reportnow but the result was the same.
From all workstation I can access all WSUS related IIS links without any problem.
I attach a windowsupdate.log from a station:
2014-07-18 12:58:23:142 968 1a20 Misc =========== Logging initialized (build: 7.9.9600.17195, tz: +0300) ===========
2014-07-18 12:58:23:142 968 1a20 Misc = Process: C:\Windows\system32\svchost.exe
2014-07-18 12:58:23:143 968 1a20 Misc = Module: c:\windows\system32\wuaueng.dll
2014-07-18 12:58:23:142 968 1a20 Service *************
2014-07-18 12:58:23:143 968 1a20 Service ** START ** Service: Service startup
2014-07-18 12:58:23:143 968 1a20 Service *********
2014-07-18 12:58:23:149 968 1a20 IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2014-07-18 12:58:23:150 968 1a20 Agent * WU client version 7.9.9600.17195
2014-07-18 12:58:23:150 968 1a20 Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2014-07-18 12:58:23:150 968 1a20 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-07-18 12:58:23:150 968 1a20 Agent * Access type: No proxy
2014-07-18 12:58:23:150 968 1a20 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-07-18 12:58:23:150 968 1a20 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-07-18 12:58:23:150 968 1a20 Agent * Network state: Connected
2014-07-18 12:58:23:153 968 1a20 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-07-18 12:58:23:153 968 1a20 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-07-18 12:58:23:169 968 1a20 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-07-18 12:58:23:169 968 d98 Agent *********** Agent: Initializing global settings cache ***********
2014-07-18 12:58:23:169 968 d98 Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-07-18 12:58:23:169 968 d98 Agent * WSUS server:
http://sccm.domain.com:8530
2014-07-18 12:58:23:169 968 d98 Agent * WSUS status server:
http://sccm.domain.com:8530
2014-07-18 12:58:23:169 968 d98 Agent * Target group: Servers
2014-07-18 12:58:23:169 968 d98 Agent * Windows Update access disabled: No
2014-07-18 12:58:23:175 968 1a20 WuTask WuTaskManager delay initialize completed successfully..
2014-07-18 12:58:23:175 968 1a20 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-07-18 13:20:24, not idle-only, not network-only
2014-07-18 12:58:23:175 968 1a20 AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-07-18 11:22:23, not idle-only, not network-only
2014-07-18 12:58:23:175 968 1a20 AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2014-07-18 11:22:23, not idle-only, not network-only
2014-07-18 12:58:23:183 968 1a20 Report CWERReporter::Init succeeded
2014-07-18 12:58:23:183 968 1a20 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-07-18 12:58:23:183 968 1a20 DnldMgr Download manager restoring 0 downloads
2014-07-18 12:58:23:184 968 1a20 AU ########### AU: Initializing Automatic Updates ###########
2014-07-18 12:58:23:185 968 1a20 AU AIR Mode is disabled
2014-07-18 12:58:23:185 968 1a20 AU # Policy Driven Provider:
http://sccm.domain.com:8530
2014-07-18 12:58:23:185 968 1a20 AU # Detection frequency: 7
2014-07-18 12:58:23:185 968 1a20 AU # Target group: Servers
2014-07-18 12:58:23:185 968 1a20 AU # Approval type: Pre-install notify (Policy)
2014-07-18 12:58:23:185 968 1a20 AU # Auto-install minor updates: No (User preference)
2014-07-18 12:58:23:185 968 1a20 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-07-18 12:58:23:187 968 1a20 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-07-18 12:58:23:187 968 1a20 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-07-18 12:58:23:192 968 1a20 AU AU finished delayed initialization
2014-07-18 12:58:23:193 968 1a20 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-07-18 12:58:23:195 968 1a20 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-07-18 12:58:23:200 968 1a20 AU Adding timer:
2014-07-18 12:58:23:200 968 1a20 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-07-18 13:20:24, not idle-only, not network-only
2014-07-18 12:58:23:201 968 12c4 DnldMgr Asking handlers to reconcile their sandboxes
2014-07-18 12:58:31:139 968 d98 AU Triggering AU detection through DetectNow API
2014-07-18 12:58:31:139 968 d98 AU Triggering Online detection (non-interactive)
2014-07-18 12:58:31:139 968 d98 AU Adding timer:
2014-07-18 12:58:31:139 968 d98 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-07-18 09:58:31, not idle-only, not network-only
2014-07-18 12:58:31:140 968 1a20 AU #############
2014-07-18 12:58:31:140 968 1a20 AU ## START ## AU: Search for updates
2014-07-18 12:58:31:141 968 1a20 AU #########
2014-07-18 12:58:31:142 968 1a20 SLS Retrieving SLS response from server using ETAG "hKnjujWw8qNxmyhQqGtJKf9fHd1QtUzyEI6M7V4AWQw=_1440"...
2014-07-18 12:58:31:142 968 1a20 SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=489&L=en-US&P=&PT=0x7&WUA=7.9.9600.17195
2014-07-18 12:58:31:842 968 1a20 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-07-18 12:58:31:844 968 1a20 SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-07-18 12:58:31:844 968 1a20 Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-07-18 12:58:31:844 968 1a20 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-07-18 12:58:31:844 968 1a20 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 14; does use network; is not at background priority
2014-07-18 12:58:31:844 968 1a20 IdleTmr Incremented idle timer priority operation counter to 1
2014-07-18 12:58:31:899 968 1a20 Report *********** Report: Initializing static reporting data ***********
2014-07-18 12:58:31:899 968 1a20 Report * OS Version = 6.3.9600.0.0.196880
2014-07-18 12:58:31:899 968 1a20 Report * OS Product Type = 0x00000007
2014-07-18 12:58:31:906 968 1a20 Report * Computer Brand = Microsoft Corporation
2014-07-18 12:58:31:906 968 1a20 Report * Computer Model = Virtual Machine
2014-07-18 12:58:31:906 968 1a20 Report * Platform Role = 1
2014-07-18 12:58:31:906 968 1a20 Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-07-18 12:58:31:908 968 1a20 Report * Bios Revision = 090004
2014-07-18 12:58:31:908 968 1a20 Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2014-07-18 12:58:31:908 968 1a20 Report * Bios Release Date = 2009-03-19T00:00:00
2014-07-18 12:58:31:908 968 1a20 Report * Bios Sku Number unavailable.
2014-07-18 12:58:31:908 968 1a20 Report * Bios Vendor = American Megatrends Inc.
2014-07-18 12:58:31:908 968 1a20 Report * Bios Family unavailable.
2014-07-18 12:58:31:908 968 1a20 Report * Bios Major Release unavailable.
2014-07-18 12:58:31:908 968 1a20 Report * Bios Minor Release unavailable.
2014-07-18 12:58:31:908 968 1a20 Report * Locale ID = 1033
2014-07-18 12:58:32:494 968 1a20 Agent *** START *** Queueing Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-07-18 12:58:32:494 968 1a20 AU <<## SUBMITTED ## AU: Search for updates [CallId = {376EAF84-55DA-4578-BA9D-CF5C7BA73E37} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-07-18 12:58:32:494 968 ef8 Agent *** END *** Queueing Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-07-18 12:58:32:494 968 ef8 Agent *************
2014-07-18 12:58:32:494 968 ef8 Agent ** START ** Agent: Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-07-18 12:58:32:494 968 ef8 Agent *********
2014-07-18 12:58:32:494 968 ef8 Agent * Online = Yes; Ignore download priority = No
2014-07-18 12:58:32:494 968 ef8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-18 12:58:32:494 968 ef8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-18 12:58:32:494 968 ef8 Agent * Search Scope = {Machine & All Users}
2014-07-18 12:58:32:494 968 ef8 Agent * Caller SID for Applicability: S-1-5-18
2014-07-18 12:58:32:494 968 ef8 Agent * RegisterService is set
2014-07-18 12:58:32:495 968 ef8 EP Got WSUS Client/Server URL: "http://sccm.domain.com:8530/ClientWebService/client.asmx"
2014-07-18 12:58:32:800 968 ef8 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-18 12:58:32:800 968 ef8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm.domain.com:8530/ClientWebService/client.asmx
2014-07-18 12:58:32:800 968 ef8 PT WARNING: Cached cookie has expired or new PID is available
2014-07-18 12:58:32:800 968 ef8 EP Got WSUS SimpleTargeting URL: "http://sccm.domain.com:8530"
2014-07-18 12:58:32:800 968 ef8 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie) started; operation # 15; does use network; is at background priority
2014-07-18 12:58:32:801 968 ef8 PT Initializing simple targeting cookie, clientId = adebe813-60c5-4cdc-886a-3ac6f4e7fd86, target group = Servers, DNS name = sccm.domain.com
2014-07-18 12:58:32:801 968 ef8 PT Server URL =
http://sccm.domain.com:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-18 12:58:32:807 968 ef8 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie, operation # 15) stopped; does use network; is at background priority
2014-07-18 12:58:32:808 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery) started; operation # 16; does use network; is at background priority
2014-07-18 12:58:32:813 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery, operation # 16) stopped; does use network; is at background priority
2014-07-18 12:58:32:822 968 ef8 Agent Reading cached app categories using lifetime 604800 seconds
2014-07-18 12:58:32:822 968 ef8 Agent Read 0 cached app categories
2014-07-18 12:58:32:822 968 ef8 Agent SyncUpdates adding 0 visited app categories
2014-07-18 12:58:35:476 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 20; does use network; is at background priority
2014-07-18 12:58:35:488 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 20) stopped; does use network; is at background priority
2014-07-18 12:58:35:516 968 ef8 Agent Reading cached app categories using lifetime 604800 seconds
2014-07-18 12:58:35:517 968 ef8 Agent Read 0 cached app categories
2014-07-18 12:58:35:517 968 ef8 Agent SyncUpdates adding 0 visited app categories
2014-07-18 12:58:35:539 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 21; does use network; is at background priority
2014-07-18 12:58:35:546 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 21) stopped; does use network; is at background priority
2014-07-18 12:58:35:546 968 ef8 PT + SyncUpdates round trips: 2
2014-07-18 12:58:38:270 968 ef8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-18 12:58:38:270 968 ef8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://sccm.domain.com:8530/ClientWebService/client.asmx
2014-07-18 12:58:38:279 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::GetExtendedUpdateInfo_WithRecovery) started; operation # 22; does use network; is at background priority
2014-07-18 12:58:38:283 968 ef8 IdleTmr WU operation (CAgentProtocolTalker::GetExtendedUpdateInfo_WithRecovery, operation # 22) stopped; does use network; is at background priority
2014-07-18 12:58:38:330 968 1a20 AU Piggybacking on an AU detection already in progress
2014-07-18 12:58:38:330 968 ef8 Agent * Found 0 updates and 75 categories in search; evaluated appl. rules of 631 out of 938 deployed entities
2014-07-18 12:58:38:333 968 ef8 Agent Reporting status event with 8 installable, 39 installed, 0 installed pending, 0 failed and 0 downloaded updates
2014-07-18 12:58:38:333 968 ef8 Agent *********
2014-07-18 12:58:38:333 968 ef8 Agent ** END ** Agent: Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-07-18 12:58:38:333 968 ef8 Agent *************
2014-07-18 12:58:38:333 968 ef8 IdleTmr WU operation (CSearchCall::Init ID 1, operation # 14) stopped; does use network; is not at background priority
2014-07-18 12:58:38:333 968 ef8 IdleTmr Decremented idle timer priority operation counter to 0
2014-07-18 12:58:38:334 968 1d40 AU >>## RESUMED ## AU: Search for updates [CallId = {376EAF84-55DA-4578-BA9D-CF5C7BA73E37} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-07-18 12:58:38:382 968 1d40 AU # 0 updates detected
2014-07-18 12:58:38:382 968 1d40 AU #########
2014-07-18 12:58:38:384 968 1d40 AU ## END ## AU: Search for updates [CallId = {376EAF84-55DA-4578-BA9D-CF5C7BA73E37} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-07-18 12:58:38:384 968 1d40 AU #############
2014-07-18 12:58:38:384 968 1d40 AU All AU searches complete.
2014-07-18 12:58:38:385 968 1d40 AU AU setting next detection timeout to 2014-07-18 16:48:25
2014-07-18 12:58:38:386 968 1d40 AU Adding timer:
2014-07-18 12:58:38:386 968 1d40 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-07-18 16:48:25, not idle-only, not network-only
2014-07-18 12:58:38:387 968 1d40 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-07-18 12:58:38:438 968 1d40 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-07-18 12:58:43:374 968 12c4 Report REPORT EVENT: {6BA9CD6B-5A65-4C9E-BF0E-C9FD3E0DF7B7} 2014-07-18 12:58:38:333+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows
Update Command Line Success Software Synchronization Windows Update Client successfully detected 0 updates.
2014-07-18 12:58:43:375 968 12c4 Report REPORT EVENT: {7C2E01D9-C08E-45F7-B34B-B19647A355E6} 2014-07-18 12:58:38:333+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows
Update Command Line Success Pre-Deployment Check Reporting client status.
2014-07-18 12:58:43:375 968 12c4 Report CWERReporter finished handling 2 events. (00000000)
2014-07-18 13:08:43:744 968 1c44 AU Earliest future timer found:
2014-07-18 13:08:43:744 968 1c44 AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-07-18 11:22:23, not idle-only, not network-only
2014-07-18 13:08:44:745 968 1a20 AU ########### AU: Uninitializing Automatic Updates ###########
2014-07-18 13:08:44:782 968 1a20 WuTask Uninit WU Task Manager
2014-07-18 13:08:44:804 968 1a20 AU Earliest future timer found:
2014-07-18 13:08:44:804 968 1a20 AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-07-18 11:22:23, not idle-only, not network-only
2014-07-18 13:08:44:814 968 1a20 AU Earliest future timer found:
2014-07-18 13:08:44:814 968 1a20 AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-07-18 11:22:23, not idle-only, not network-only
2014-07-18 13:08:44:837 968 1a20 Service *********
2014-07-18 13:08:44:838 968 1a20 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-07-18 13:08:44:838 968 1a20 Service *************
And few lines from c:\windows\softwaredistribution\reportingevents.log
{C22046B9-259E-4FA2-9B3A-A651C4F5FFF9} 2014-07-17 21:19:07:558+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
{C38A4F89-4D05-4241-9824-B763DCF8C276} 2014-07-17 21:19:07:620+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting client
status.
{AD91F1CA-DF91-4B5E-90F1-42C7A40428AB} 2014-07-18 03:01:59:196+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
{594D314B-42EC-4CF7-BFE2-EB1305992705} 2014-07-18 03:01:59:196+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting client
status.
{93485440-0512-418D-A6AE-6BD9841948ED} 2014-07-18 08:50:23:124+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
{87F1DA10-E128-497B-AD19-1EE055D59474} 2014-07-18 08:50:23:187+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting client
status.
{AA7918AB-37A3-4229-8304-70180E264539} 2014-07-18 10:15:28:285+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 1 updates.
{0A10260A-27D5-4470-8061-0CC7DC52F297} 2014-07-18 10:15:28:286+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting client
status.
{EC9D09DE-2EEF-48C6-A258-D819087B586A} 2014-07-18 10:16:01:601+0300 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {4C08C484-AC82-40DC-AB50-9C66254470FA} 202 0 AutomaticUpdates Success Content Download Download
succeeded.
{546EA75A-8111-4B58-A87B-5732A6DC63CB} 2014-07-18 10:16:01:698+0300 1 189 [AU_UNSCHEDULED_INSTALL_READY] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Installation
Ready: The following updates are downloaded and ready for installation. To install the updates, an administrator should log on to this computer and Windows will prompt with further instructions: - Security Update for Windows Server 2012 R2 (KB2928120)
{C5E9F179-5EA3-42EF-9796-B9CFBBD5879F} 2014-07-18 10:30:30:541+0300 1 181 [AGENT_INSTALLING_STARTED] 101 {4C08C484-AC82-40DC-AB50-9C66254470FA} 202 0 AutomaticUpdatesWuApp Success Content Install Installation
Started: Windows has started installing the following update: Security Update for Windows Server 2012 R2 (KB2928120)
{3E2D6E6F-AC3F-4A68-AC99-F103FE8DC439} 2014-07-18 10:30:47:392+0300 1 183 [AGENT_INSTALLING_SUCCEEDED] 101 {4C08C484-AC82-40DC-AB50-9C66254470FA} 202 0 AutomaticUpdatesWuApp Success Content Install Installation
Successful: Windows successfully installed the following update: Security Update for Windows Server 2012 R2 (KB2928120)
{6BA9CD6B-5A65-4C9E-BF0E-C9FD3E0DF7B7} 2014-07-18 12:58:38:333+0300 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows Update Command Line Success Software Synchronization Windows
Update Client successfully detected 0 updates.
{7C2E01D9-C08E-45F7-B34B-B19647A355E6} 2014-07-18 12:58:38:333+0300 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows Update Command Line Success Pre-Deployment Check Reporting
client status.Yes, on the same server it's installed and configured a SCCM 2012 R2.
Well, that's that then. Configuration Manager Software Updates clients do NOT report to the WSUS server.
From what i've seen reinstalling OS of the system resolves the problem, but this cannot be a solution.
No, it won't, because shortly thereafter ConfigMgr is going to grab ahold of that system again and make it a ConfigMgr client, and disable client reporting to the SUP.
The *solution* is to ENABLE reporting to the Software Update Point in the ConfigMgr SUP Configuration settings.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Lose connection between computers on network through airport
Our connection between computers on network goes down every day or so. Connection to internet stays ok. We restablished computer connection by cycling airport extreme off and on again. Has been getting more frequent. Any suggestions or help? Faulty unit? Thanks.
As my magic crystal ball is on the shop for oil change, at the moment I'm not able to see your configuration or setup.
No info - no help -
ACS 5.3 - 11033 Selected Service type is not Network Access
I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text:
Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect. Any Ideas?If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you" -
How to sync with two computers not at the same time, I'm registerd with one computer
How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync -
Non-domain computers not reporting
I have a few machines that are not joined to the domain, but use our domain joined WSUS server. Never had a problem before, but this problem seems to have started when I did the migration to 2012 R2. I used the TechNet migration procedures that
I later found can be somewhat problematic. I just discovered that the computers not joined to the domain are having issues. I'm still trying to confirm whether they're actually getting updates, but the certainly aren't reporting.
I have confirmed the clients cannot contact http://myserver/selfupdate/wuident.cab. I've looked at permissions in IIS, but the only article I've found is for WSUS 3.2 (https://technet.microsoft.com/en-us/library/dd939903(v=ws.10).aspx). It talks
about anonymous access being enabled for reportingwebservice and I verified it is. I've also found people reference a ReportingWebService virtual directory in IIS, but I only see it as an application and not a virtual directory so I'm guessing they changed
the way that works since all my domain joined machines work just fine. Can anyone provide a 2012 R2 reference to setting permissions correctly so I can confirm that?
I'm getting these errors in WindowsUpdate.log:
WU client failed Searching for update with error 0x80244019
WARNING: GetAuthorizationCookie failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
WARNING: Failed to initialize Simple Targeting Cookie: 0x80244019
WARNING: PopulateAuthCookies failed: 0x80244019
WARNING: RefreshCookie failed: 0x80244019
WARNING: RefreshPTState failed: 0x80244019
WARNING: PTError: 0x80244019
WARNING: Reporter failed to upload events with hr = 80244019.
WARNING: Cached cookie has expired or new PID is availableI have confirmed the clients cannot contact http://myserver/selfupdate/wuident.cab.
It looks like you have not included the port number, 8530 is used by default with 2012R2. Try http://myserver:8530/selfupdate/wuident.cab.
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :) -
HT201436 Most of the time my phone as not network connection any goes to voicemail
I find few big problem on my phone
-1 Most of the time my phone as not network connection and goes to voicemail
-2 when I call and I talk I find the call has been cut the words and also I heard half of the words of the person is calling me !!
I hope you can help me
My colleagues from work they thinking I did not want answer the calls
Is very annoying me
Thank youDo you see any toolbars at all?
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
Auto certificate enrollment for computers not happening
Hi
In my environment the auto certificate enrollment for computers not happening through GPO.
Domain computers has permission of enroll on computer certificate template.
Please suggest.
Regards,
Deepak SHi,
Please reconfirm the Autoenrollment group policy is configured and applied to the user or machine. Verify the Group Policy settings set the proper registry settings. If Group
Policy is configured correctly, the next step is to troubleshoot enrollment.
Autoenrollment requires the use of Version 2 or Version 3 Certificate Templates. Certificate Authorities must be on the appropriate OS Version and edition. The table below
outlines OS Version and Edition support for Version 2 and Version 3 certificate templates.
The similar thread:
Certificate Autoenrollment for Domain Computers GPO does not work
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3797dad9-6c4f-41e4-8c4f-ad37a7570aa4/certificate-autoenrollment-for-domain-computers-gpo-does-not-work?forum=winserversecurity
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
Can't see local computers in network neighborhood anymore
Hello,
I bought a WRT610N on Friday to replace my WRT54G and while it is running great I have a small issue.
If I go to browse my local network, I don't see a list of computers like I used to with the WRT54G
If I type \\computername then I can access the shares on each computer as well as be able to \\computername\c$
I can ping all of them and yes all of them are on the same workgroup as well as the router itself.
What setting I need disabled in the router so I can "see" my computers in network neighborhood
ThanksAre you able to access the computer using the ip address of that particular computer....? Try that and check if you can access the computer using the ip address instead of the name.
-
I recently received 2 emails form Apple checking if I had purchased 2 games from the App store that were downloaded to computers not associated with my ID. They then advised me to change my password if I had not made those purchase. How do I know that emails are legit? I am afraid that they are scams to get my information by going on to supply information. I had checked my credit card just now and no transactions have been posted yet. Thanks!
You can always manually go to http://appleid.apple.com and change your password there, to avoid any links from the emails.
That's the only place you should use to change your Apple Id password.
With that said, do you know if anybody may have used your Apple Id to download things? Like kids to a new computer or tablet? -
Using Time Machine for two computers, not simultaneously.
Using a WD external HD via Firewire 800 to backup my main computer with Time Machine. I use my 13" MacBook Pro while away from home for weeks, then putting it away when home. (Note: not networking between them.) I do want each computer to be identical so that when I leave with my MacBook, my programs and data are the same. I do have MobileMe at both locations. Can I update the MacBook before going back to it by disconnecting Time Machine from my iMac, connecting Time Machine to my MacBook Pro via Firewire 800 and restoring?
Thanks for your help.Using a WD external HD via Firewire 800 to backup my main computer with Time Machine. I use my 13" MacBook Pro while away from home for weeks, then putting it away when home. (Note: not networking between them.) I do want each computer to be identical so that when I leave with my MacBook, my programs and data are the same. I do have MobileMe at both locations. Can I update the MacBook before going back to it by disconnecting Time Machine from my iMac, connecting Time Machine to my MacBook Pro via Firewire 800 and restoring?
Thanks for your help. -
i use iphone 3 .even though i am not surfing net my balance money is being deducted for surfing net.So please could you plese tell me what can i do regarding that in settings bcause the network provider says its not network default?
i use iphone 3 .even though i am not surfing net my balance money is being deducted for surfing net.So please could you plese tell me what can i do regarding that in settings bcause the network provider says its not network default?
-
I try to sinc. first i get "computers not authorized, would you like to authorize". I do that then it tells me its already authorized. enter and it starts over.
Google is amazing...
http://support.apple.com/kb/HT1420
also you can:
To deauthorize all computers associated with your account
Click iTunes Store in the Source pane.
If you’re not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
After that start from scratch
Maybe you are looking for
-
(Win8.1 Pro) Blue Screen of Death: IRQL_NOT_LESS_OR_EQUAL
I'm getting intermittent BSODs, usually with the message "IRQL_NOT_LESS_OR_EQUAL". It doesn't appear to be tied to a specific activity - sometimes it will happen when I'm not at the computer. I tried doing a Memory Diagnostic test and it found no err
-
How to burn AVI on a DVD using iDVD
Hello folks, I have a number of old movies in AVI format. I can play these without any problems in QT on my Mac - I have Perian installed and Flip4Mac. I open iDVD, then create a new project, add the AVI file, then iDVD starts crunching the file for
-
I used a template and modified it it's 2 pages. I can't add a third page. I found no documentation re adding a page so I assumed that if text flowed beyond the second page a third page would be added. I even pushed a picture into the non-existent thi
-
I cant open Adobe Illustrator CS6 in Mavericks
I recently loaded OSX mavericks on my Imac. I had the same problem with Illustrator and After Effect CS6. Any Suggestions or haw can I fix it?
-
We have heard from a number of users who have reported an inability to apply markers to AVCHD MTS files because the .mts files were moved out of the folder structure created by the camera. For example in this screenshot I demonstrate an MTS file that