Computers not recognizing that my ipod is connected

Not too long ago, my ipod froze. It was left to die therefore it could be charged back to life, and the battery did die, but now it won't charge because not a single computer is recognizing that the ipod has been connected. I've tried more than one computer, (2 PC's, 1 mac - right now it's restored to a PC), i've tried more than one cable, and I've even tried to charge it in my boyfriends car ipod charger/tuner player (and his ipod works perfectly fine on it)!
The ipod turns on, so an apple is seen on the screen, but after a few minutes while it's still on the screen, it shuts itself off and says "Please Wait Very Low Battery" but I can't charge it! I'm so confused!
I'm very confused and would like to try to fix this asap!
If anyone has any idea what to do, please, I'd greatly appreciate it!

I received some help from my brother, and searched how to put the ipod in disk mode, and so far it has been charging and is showing up in my itunes!

Similar Messages

  • Windows not recognizing that my ipod is connected

    Right now im annoyed!! What happened is this! I got a ipon nano for christmas and installed all the software on my mums computer at home, the ipod worked fine. I returned to my house after xmas and installed the software again, and everytime i instert my wire nothing happens, the screen on my ipod doesnt change and itunes says that no ipod is connected. I tried uninstalling everything and reinstalling, still didnt work, so then tried installing updater, but asked me to connect ipod to update, still didnt recognize my ipod. I read through all of my leaflets and noticed that it said that ipod can onloy be installed on any one computer or apple device at anytime?
    So yesterday i went into the apple store, and they played around with my wire as they thought it might be the problem, they were NO help at all, just told me it worked and theres and to go home and try it, needles to say it didnt work, ive just tried my wire in my friends laptop who is an ipod shuffle and it worked fine. Now what the **** is going on?? its utterly disgraceful that these things cost so much and i cant use it!

    Okay, first, lets try putting the iPod into Disk Mode then it should be recognized by the computer. Does it say "Do Not Disconnect" on the iPod when it's connected?

  • Computer not recognizing that my ipod is pluged in!!

    I have recently reformatted my comeputer and got some new music put on my itunes and when i tried to plug in my ipod it just doesnt do anything...like the little screen on the ipod that usually sais "do not disconnect" doesnt come up...the computer doesnt even accnowladge that anything is pluged in...i tried downloading the newest ipod softwhare and that didnt work...i tried putting in the origional disk that came with it and that didnt do anything...also when i plug my ipod into the computer it drains the battery instead of charging it...suggestions??

    I don't know if this might work for you guys but this is what got my problem solved. If you experience the following, the Ipod was working but suddenly it stops working (i.e. the ipod screen is totally blank no icons like battery low or whatever) and when you connect it to the computer the little sign that means do not disconnect does not appear (the pc does not recognized that the ipod is connected) then maybe this might solve your problem. Do not connect the Ipod to the computer for about 24 hours. Do not try to charge it or anything just leave it by itself let the battery drained then try it the next day and hopefully the icon of battery is low will appear then you can charge it by connecting to the pc.
    This is what happened to me by accident i guess, i had given up and had realized that i had just spend two hundred dollars on something that didn't work but today i tried to turned it on and the battery is low icon appeared so i connected to the PC and now it works.
    Good Luck.

  • Itunes is not recognizing that my ipod is plugged in so I am unable to sync the device. What can I do to get Itunes to notice my device?

    Itunes is not recognizing that my ipod is plugged in so I am unable to sync my device. What an I do to get itunes to notice my device is plugged in?

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My iPod is connected to my computer. The iPod registers that it is connected to the computer, but iTunes and my computer do not register that my iPod is connected. I have tried to update and re-install but nothing is working. Can anyone help me out please

    So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Computer does not notice that my iPod is connected

    Whenever I plug my iPod into my computer, My iPod will light up, but iTunes doesn't notice it is there, and neither does my computer, it will not charge or sync music which is very annoying, seeing as I just got it for Christmas...
    Help me please, any ideas are welcome,
    Thanks in advance

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • ITunes doesn't detect that my iPod is connected

    I plugged my iPod touch in today so I could sync it, and the USB found sound was played, followed by a USB error sound. iTunes did not recognise that my iPod was connected and would not sync it.
    I looked in Device Manager and there was an exclamation mark over Apple iPod, and the following message was displayed:
    "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
    I don't know why this is happening, as I successfully synced my iPod yesterday with no issues.
    Can anyone help?
    Thanks

    I am having this same problem. I have been able to sync before, but now when I attach my ipod, itunes does not recognize it. The PC thinks it's another drive letter, and itunes never shows it in the list on the left.
    Any ideas how to correct this?

  • The PC that my ipod was connected crashed and i wanted to switch it to my laptop now..the question is will i lose all my pictures and notes from my ipod if i switch PC's or is there a way to make it stay since i have icloud backup on my ipod.

    hi...the pc that my ipod was connected crashed and i wanted to switch it to my laptop now..the question is will i lose all my pictures and songs from my ipod if i switch PC's or is there a way to make it stay since u have icloud backup on my ipod. i really dont want to lose my pictures so plz let me know if there is a way...thank you

    The iCloud backup does not include non-Tunes purchased music and photos that were synced to the iPod. The iCloud backup does not also included a few other things included in the iPod backup that iTunes makes.
    The iPod backup that iTunes makes does also not included non-iTunes purchases and photos synced to the iPod.
    free programs like iFunBox with copy non-iTunes purchased music and some other things from iPod to computer.  A paid program like TouchCopy is needed to copy photos synced to the iPod to a computer.

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

    i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • My iphone 4 is not recognized by itunes when i connect it, wants me to restore to factory settings

    my iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. do i have to or is there a better way to fix it?

    Howdy AndieKanaras,
    It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
    If you don't see your connected device in iTunes for Mac
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT201413 When connecting iPod Nano, getting message that "an ipod is connected but cannot be identified properly".

    When I connect my iPod Nano to the same installation of iTunes that we use for my wife's iPod Classic I am getting the message that "an iPod is connected but cannot be properly identified".  This has worked before and I can connect my wife's iPod Classic and synch with no problems.  I have tried resetting the Nano but that did not fix it.  I am running Windows Vista.  Has anyone else had this problem?

    I fixed it.  In itunes click help, run diagnostics, run tests, the test comes to ipod and says it is not running correctly so click the HELP and follow the instructions to the end.  Mine was fixed after i restarted computer!!!

Maybe you are looking for

  • Report in excel format with proper alignment

    Hi all, We are using Reports 10g R2. Users want to see the report (invoked from forms) in excel format. Of course, I gave "spreadsheet" as the des type and alignment is the major task. Already more than 500 & above reports are there. So it will not b

  • Delievry for "0" qty should not be allowed

    Dear All, Currently i am able to create delivery, PGI & Invoice for the "0" qty. This happens normally when material is NOT available for delivery, users put "0" qty and do delivery & PGI. I want to restrict the same. System should give error wheneve

  • Best setup for multiple email accounts

    I have 8 email accounts in my iphone 3G and it seems that many times it gets "hung" up on the first one (gmail) because it just says "connecting". The only way to solve it is to turn the phone off and then on again, which I'm doing several times a da

  • Adding More InfoObjects into  a  Dimension

    Hi Team,     I  have  enhanced  2lis_11_vahdr  with  5  partner  functions (in 7.0). In order  to  load  the  data  into 2sd_c03 , Would  it  be OK to add  these 5 infoobjects  into the CUSTOMER dimension  which already  has 10  info  objects.? Is  t

  • Error is due to depre periods

    Hi All, During depreciation run, the following error shows: Maximum investment amount exceded in area 51 Message no.AA642 Asset affected :  00000000000xxxxx-000000 Diagnosis Process terminated, because the total investment support amount 1234.00 exce