Computers sound on iPad with Remote Desktop but muted on laptop.

I'm currently using iTeleport for a remote desktop app (but looking for something better). Anyway, I would like to hear the laptop sound (core audio output) on the iPad - but here's the catch - I want the laptop speakers muted. Is this possible? Can I have the laptops sound output over the iPad while the laptops speakers are muted (and not have the mute follow to the iPad)?

Its just simple...enable UPnP forwarding on the router.

Similar Messages

Novell login not available with remote desktop on windows 7

Installed Novell Client 2 SP3 for Windows Server 2012 on my terminal server. When I log in from Windows XP to that terminal server I am getting an option to login with Novell Client. On Windows 7 however I only can logon to the server. What am I missing here?

djaquays <[email protected]> wrote:
> Mostly, that MS RDP for Mac ignores the authentication level:i:0 option
> in an RDP file and there's no GUI equivalent to force legacy
> authentication.
Microsoft's Network Level Authentication (NLA) feature is supported in
Windows Server 2008 and later terminal servers, and supported by
Remote Desktop Connection (MSTSC) 6.x and later terminal clients.
Windows XP did not ship with a MSTSC 6.x terminal client, but it is
available optionally through Windows Update.
The NLA authentication is essentially requiring that valid Windows
user account credentials for the Windows Server machine must be
provided /before/ the RDP-level terminal session connection is even
attempted or permitted. If the Windows user credentials you're logged
in with on the client workstation do not already satisfy this
requirement, the NLA-aware MSTSC clients will prompt you for valid NLA
credentials before even attempting to open the terminal session.
In other words, NLA doesn't directly have anything to do with whom you
will become authenticated as within the terminal session, or whether
you'll reconnect to some other already-running terminal session; it's
a new default mechanism which requires Windows credentials for
authorizing you to create an RDP connection to the Windows Server
machine "at all."
Unfortunately Windows Server 2008 and later don't permit you to turn
NLA completely off. You can configure the Windows Server to always
require NLA, which means pre-MSTSC 6.x terminal clients will be unable
to connect. Or you can configure the Windows Server to "not require
NLA" ("Allow connections from computers running any version or Remote
Desktop"), but this still means Windows Server will use NLA if the
workstation's MSTSC client supports NLA.
The only option which has been available to "disable NLA" even when a
Windows Server 2008 or later terminal server and a MSTSC 6.x or later
terminal client are involved is to configure the
"enablecredsspsupport:i:0" setting in the MSTSC client's .RDP file
(e.g. default.rdp in the My Documents folder), in addition to
configuring the terminal server to "not require NLA."
Once you have "Allow connections from computers running any version or
Remote Desktop" set on the Windows Server, and
"enablecredsspsupport:i:0" set in the MSTSC client, now you're back to
the Windows XP & Windows Server 2003 behavior where an RDP terminal
connection can be established without first having to supply NLA
credentials, and the first thing the MSTSC client user will experience
is the full normal credential provider-based login experience just
like you see at the physical console of the terminal server.
Note that if you do leave NLA enabled and supply NLA credentials
during the MSTSC connection attempt, after successfully using those
credentials to authorize creation of the RDP connection, the MSTSC
client will /also/ default to using the NLA credentials as default
credentials to attempt logging on with within the terminal session
itself. In other words, if you successfully supply NLA credentials,
by default you also become logged in on the terminal session and go
straight to the desktop of the Windows user account specified in the
NLA credentials. So even though "NLA credentials" and "whom I will
logon as within the terminal session" are two separate things, by
default the MSTSC client tries to use the same credentials for both.
But it's not that the NLA credentials "must" be used for logging in on
the terminal session; that's simply the default behavior. If you
leave NLA enabled on the Server 2008 or later terminal server, after
NLA credentials are successfully used to authorize creation of an RDP
connection, if you wanted to instead be prompted within the terminal
session with the normal credential provider login experience, enable
the "Always prompt for password" on the Windows Server 2008 or later
terminal server.
(On the Server 2008 or later machine, under "Administrative Tools"
find the "Remote Desktop Services" group and launch the "Remote
Desktop Session Host Configuration" console. Highlight/select the
"RDP-Tcp" connection, right-click and select "Properties". On the "Log
On Settings" tab elect "Always prompt for password".)
That sounds like probably the scenario which fits best for the "I have
a Macintosh-based client which doesn't allow enablecredsspsupport:i:0
/ authentication level:i:0." You would leave NLA enabled on the
Server 2012 machine, but enable "Always prompt for password" in the
RPC-Tcp connection properties on the Server 2012 machine. Such that
after NLA authentication was performed and Windows allowed creation of
the terminal session, instead of immediately also attempting to login
within the terminal session as the Windows account specified in the
NLA credentials, Windows will instead present the normal interactive
credential provider login experience to allow the user to specify whom
they want to login as.
Finally, note that everything described above applies even to a
Windows Server and Windows client workstation that do /not/ have the
Novell Client for Windows installed. The same mechanisms remain in
effect even once the Novell Client is installed; the presence of the
Novell Client just changes what credential providers would be used or
presented within the terminal session once the terminal session was
allowed to be created. The fact that NLA is required by default and
requires valid Windows credentials in order to authorize an RDP
connection is still the same, regardless of whether the Novell Client
is present or not.
Alan Adams
Novell Client CPR Group
[email protected]
Novell
Making IT Work As One
www.novell.com
Upgrade to OES Community
http://www.novell.com/communities/co.../upgradetooes/

Ipad bluetooth keyboard not working with remote desktop

My clients ipad bluetooth keyboard works any other time, just not when connected to his servers via the remote desktop. PC Windows 7 Servers.
I'm trying to get the keyboard information, but any ideas?

Are you using an app like LogMeIn Ignition to access your servers? I believe that LogMeIn Ignition requires you to tap a little keyboard button near the bottom of the screen to activate use of the keyboard (that's how it works in Splashtop Remote, can't be much different in LogMeIn Ignition.)
Are you sure the app you have supports blue tooth keyboard support with remote desktop? (not sure if they have to, I just recall seeing this in Splashtop patch notes awhile ago.)
HuskieN.

Problem with Remote Desktop on iPad 2 and windows 8.1 pro

I downloaded the Microsoft Remote Desktop app from the App Store on my iPad 2. I typed in the IP address for my windows 8.1 pro computer on my iPad 2 in school to try connecting to my windows 8.1 pro computer at home. I'm having
a hard time doing it. Do I need a rd remote gateway to access my computer from outside my local network. If so, how do I find my gateway server name? Also, I saw somewhere that I have to press accept in a pop up message on the computer your trying to connect
to. Is this true? No one is home during the day and my iPad 2 has to stay in school. Can you please give me a step by step guide with photos to help me connect to my windows 8.1 pro computer from my iPad 2 from school, which is of course outside my local network.

Hi,
Please refer to the document below for the procedure to use Microsoft Remote Desktop APP of IOS APP store.
Getting Started with Remote Desktop Client on iOS:
http://technet.microsoft.com/en-us/library/dn473013.aspx
Roger Lu
TechNet Community Support

TS4062 i am trying to sync my ipad with my desktop itunes but the ipad is not showing as a device

I am trying to sync my ipad with my desktop itunes but the ipad is not showing up as a device on my itunes account.
Any suggestions?

Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991

Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server. On 32 bit Windows
7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
I think Windows 8.1 is not telling the terminal server what printers it has.

Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

it might be worth checking your TV settings to see if it has an option for different settings based on whether using the tv speakers or headphones.
Normally you should be able to control the sound via the tv.
Have you tried it without the headphones?

Stuck with Remote Desktop 3 without the serial number:(

I am the new tech assistant for my lab of 35 macs..
The computer used for managing the lab with remote desktop has crashed.
I have found an older model mac with remote desktop. I'd like to transfer that application
to my newer mac...but It will ask me for the serial number of which I do not have.
The old tech assistant has gone..and along with it...the software and document.
I have turned this lab upside down and I've found the box Apple Remote Desktop 3
but nothing else. I thought maybe the serial number would be on it. But I see
only the bar code... I am frustrated to no end. They don't answer my emails for help
Sincerely,
Love using Apple Remote Desktop 3 user but can not anymore:(

IIRC the serial number was never on the outside of the box so have you looked inside the box? Do you see the booklet that came with the box? Is the Serial Number inside? The Serial Number takes this form:
XARD-030-000-x-xxx-xxx-xxx-xxx-xxx-xxx-x
Who is not answering your emails for help?
Having read the terms and conditions of this forum prior to posting you'll know these are user-to-user forums and Apple are not listening, so it's difficult to see what any of us here can do to help? Perhaps if you find the purchase receipt you might be able to contact your local Apple Rep and ask if they have a record of it?
You can still use Remote Desktop by purchasing it again from the App Store. It costs far, far less than the installer media version and does not require a serial number. All you need is an Apple ID and an associated debit or credit card.

Troubleshooting error with Remote Desktop 3.1

Have OSX Server 10.4.10 on a powerPC with Remote Desktop 2.2, Security scans advise to update to Remote Desktop Client 3.1. Everytime I do this I get this error "The Remote Desktop Administrator software failed to start du to an unexpected error. The Remote Desktop software may not be installed correctly or the computer may require a restart."
I have two machines on this network that are giving this error, one this server and the other a laptop. Version 2.2 was running and working just fine prior to the update, now its broke. Is there a log file somewhere to try to figure this error out? Has anyone else experienced this issue? I have already tried to reset permissions, and reboot, but nothing works.

Just to confirm my understanding, you are running the ARD 2.2 Administrator on the server, and something is advising you to upgrade that system to the ARD 3.1 client? If that's the situation, then do not upgrade. The 3.x client will not work with the ARD 2.2 administrator. If you did indeed upgrade, you'll need remove ARD using the instructions here and then reinstall ARD 2.2 from your installation disks.
Similarly, if you've upgraded any client workstation to the 3.x client, you'll need to remove it and reinstall the 2.2 client using this installer. It says it's an "updater", but it will work anyway.
Hope this helps.

Hardware acceleration has been disabled because it is in compatible with remote desktop

So I go and lock my pc only to come and find that after effects says hardware acceleration has been disabled because it's incompatible with remote desktop
I have looked around and others have said to delete a certain preference file but they did not give the file location
Does anyone know where this pref file is?

And what is the question? C'mon, the files and folders are properly labeled. Don't make it any more complicated...
Mylenium

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to connect a printer with Remote Desktop for Mac, version 8

Hello,
I use Microsoft Remote Desktop 8.0.3 with my Mac to connect to an application which is based on a Windows Server 2008.
I don't find the way to print to my Mac. I don't find the menu for it :-(
Same problem to transfert a file from the Windows Server to my Mac :-( :-(
Can you help me ?
Many thanks in advance
William

Hi William,
Please make sure that Forward printing devices is checked. This allows you to use the local printer connects to your Mac in a remote desktop session.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Thanks.
Jeremy Wu
TechNet Community Support

I am trying to sync a new ipad with a mac but do not want to sync the 15000 photos from my mac to the ipad - how do I prevent this?

I am trying to sync a new ipad with a mac but do not want to sync the 15000 photos from my mac to the ipad - how do I prevent this?

See Here,
Syncing photos via iTunes
From here...
http://www.apple.com/support/ipad/syncing/
And Here...
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I copied mp3 files from a usb stick and they appear in music folder in finder and on iPhone/ipad with itunes match but not in iTunes?

I copied mp3 files from a usb stick and they appear in finder in my itunes media/music folder and on my iphone and ipad with itunes match but not in the itunes library?

Not working. And it didn't used to be a problem. iTunes can find the songs with Search Library, but doesn't show in any index (by song, artist or album). Finding with Search Library offers to play or add to Up Next, but neither actually does anything. Using File-Add to Library does nothing as well. The only way I can get the new files to play is to find in Finder and Open with iTunes.
I suspect Apple is trying to drive me to buy from iTunes store. Not gonna happen. If they don't fix this, I'll find another player.
This worked fine before OSX 10.8.

Computers sound on iPad with Remote Desktop but muted on laptop.

Similar Messages

Maybe you are looking for