Computor restarting while trying to open new software programs!

Okay! The MSI 7094 motherboard is an old board and I only use it as a secondary option but this is the first time I have ever encountered this problem so I'll try to explain.
I boot up, fine, then I go on-line, fine, I can browse the web without any problems but if I try (for example) to open one of my games on Steam I get an instant reboot. At first I thought it was just a problem with Steam but since then I have tried to open Nvidia System Monitor and the same thing occurs. I have run memtest and I did not get any errors so I think the memory is okay. I also changed the start-up and recovery by unchecking the automatic restart but I cannot even get the bsod to come up. I have not tried opening any other software on my machine but I would imagine that I would get the same result (computer crashing). I have had a look in Bios (health check) to see whether the machine is is running hot but it seems okay.
Can anybody shine a light on this problem before I take drastic action like taking the computer to bits and/or reformatting the hard disk (if necessary).

Okay! I downloaded new drivers last night and no change.
Today I installed the ATi Tool and the temp was in the 70s so I checked the fan and it was not turning so I gave it a little help and it started spinning and the temp went down to 50/51. Which means I didn't clean the fan enough or it is faulty. Is there anything I can do to rectify that, can I change the fan?
Anyway I ran the scan for artifacts for about 12 minutes with no problems and the temp went up to 72/73; stopped the scan and temp fell to 50s. I was also running the GPU-Z program to confirm temp and both were showing same. I tried another scan for artifacts and the computer crashed as soon as I pressed the scan for artifacts button so now I cannot use the ATi programm to put the graphic card under stress.

Similar Messages

Cannot open new software program

I managed to successfully download a library cataloging program titled "Delicious Library 2," but when I go to open it, it refuses to open. I dragged the icon into the dock, but instead of the icon bouncing until the program opens, it only bounces once and stops. Any ideas?

. Oh well. I guess I'll just have to upgrade? It says under the help section, though, that it is compatible with Tiger. http://www.delicious-monster.com/help.php?id=2#article
Unless the compatibility is only for the earlier version of D.L.?

Ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

I had a similar problem, does the phone show anything on the screen, for example "update failed, connect to computer" if it does, try opening "Sony PC Companion 2.1" click start on "support zone" then click "phone/ tablet software update" a message will pop up, press repair my phone / tablet, select your phone in the list, then follow what it says, try doing this even if the phone shows nothing, you will lose everything, all data will be gone if you follow my steps

User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

First, ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others

While trying to open the mail , it shows a blank screen then went to home page.

while trying to open the mail , it shows a blank screen then went to home page.

Hello there, Nina2800.
It sounds like you are having issues connecting to the iTunes Store and getting a blank page. The following Knowledge Base article offers up some great steps for verifying connectivity:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Troubleshooting on a Mac
If you haven't been able to connect to the iTunes Store, a software conflict or your internet service provider (ISP) may be blocking your access.
Update iTunes to the latest version.
If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. To configure your firewall, please refer to the "Blocked by firewall" section in this article.
You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Click here to find out how to use Keychain First Aid to resolve any issues with your keychain.
If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
Additionally, this article provides some additional recomendations if the issue persists:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Getting something went wrong while trying to open workbook through code?

hi,
i am getting something went wrong while trying to open workbook through code below is m code:
ES.ExcelService client = new ES.ExcelService();
client.Credentials = System.Net.CredentialCache.DefaultCredentials;
ES.Status[] status;
string sessionId = client.OpenWorkbook("http://servername/Documents/exceles.xlsx", "en-us", "en-us", out status);
i have also added modify permission to wpg_wss group but i am still getting the same error.
any help is appreciated.
thanks,
gaurav

Hi Gaurav,
For your issue, you need to make sure the site where your workbook is stored in is a Trusted Location in Excel Service Application:
http://technet.microsoft.com/en-in/library/ff191194(v=office.14).aspx
For more information, you can have a look at the blog:
http://blogs.msdn.com/b/cumgranosalis/archive/2006/03/24/excelserviceshelloworld.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

My Mac OS X does not restart while trying to update/install

My Mac OS X does not restart while trying to update/install iTunes. It allows me to click on Restart button, then just the screen saver shows up, waited 10 -15mins and nothing happens. Had to force shut to try again, same thing happens.

As a test, try opening the PDFs using Preview and see if they will print correctly from that application. If so, then it is likely an Acrobat problem. If they still don't print correctly, it is like a file problem.
You can also try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

Storeagent is trying to install new software?

I was using my Mac tonight and suddenly this dialog box I had never gotten before popped up. It said:
storeagent is trying to install new software.
Type your password to allow this.
...with fields to enter the data and a "Cancel" and "Install Software" button. In addition, there was a help (?) button that when clicked on called up Mac Help Center with the section on "If you forget your login password" but no data on what this storeagent is.
The dialog seemed to have been provided by Mac OS, since it floated above all windows.
Normally, when I get an unfamiliar message, I type a phrase from it (in quotes) into Google and this pulls up plenty of cases where people have inquired about the same issue before me, but this time when I entered the phrase used in the dialog and the title of this post, I got nothing. Surely I am not the first one who has encountered this dialog before?
I clicked Cancel, since you hear so much about viruses these days attempting to install malignent software. When I did so, I got a dialog with the icon of the Mac App Store, saying the app update had been cancelled.
Maybe this dialog is legit? Advice appreciated.

Okay, I've thought of a couple of things you can try if you don't want storeagent to run when MAS is not open:
1. Go to Applications > Utilities and launch Activity Monitor. Processes are arranged alphabetically. scroll down to storeagent and, if it is running, highlight it. Then go to the top left of the window and click on "quit process". That is a manual way to stop something from running. Test: leave Activity Monitor open and launch MAS - check to see if storeagent launched itself right after that. If so, quit MAS and see if it quits - if not, quit the process manually.
2. What settings do you have set in System Preferences > Software Update? I prefer not to have things done automatically so I have everything unchecked:
You could test by unchecking everything to see if you get any further password prompts for installs after that.

Time out error while trying to open workbook

Hi all,
In analyzer open workbook While trying to open the JT dashboard, timeout error is coming. Please give suggestion on that.
Thanks & Regards
R. saravanan

Hi sri,
User input option itself not coming, open that workbook itself it taking more time and throwing time exit error, I am new to this
kind of issue, can u suggest where and all step by step i have to check.
thanks

While trying to opening Video link in IE6 browser a white screen appears and the screen hangs.

Added a video as an internal link to a news article.
The flash player version we are using is 7.0.0.0. This video opens fine in all the browsers except for IE6 browser.
While trying to opening this link in IE6 browser a white screen appears and the screen hangs.
Please find the link below :
http://www.abnamroprivatebanking.com/global#global/au-news/global/14241
When we try to open any videos in the above link using IE6 browser white screen appears.
Could you please provide a solution as what can be done to resolve this issue.

if you're using an flvplayback component, you need to use fp 8 or better. or, use the netstream class with fp 7.

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
Have you considered posting your question in their forums?
Here is some information re. the jar file:
http://ostermiller.org/opening_jar_files.html

Getting error "Error connecting to MDEX" while trying to open micro browser

Hi,
I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
Error connecting to MDEX. The data service associated with this editor is not correctly configured.
Please guide the if you have any clue.
Thanks,
Mayank Batra

I have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
Hope it helps,
Michelle

Getting error while trying to open the b2b console

Hi All,
I have installed weblogic server 10..3.1.0 and SOA 11.1.1.1.0. After installation I started the admin server and managed servers. While trying to open b2b console after login I am getting the following error message
access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission context=APPLICATION,name=b2bui getApplicationPolicy)
Can anyone suggest whst could be the issue with this.

hi,
Suppose if you are installing linux system...
Once try to change the permissions to your specfied user!
try this way may be your problem is solved!
Regards,
Bala satish Kamma
Edited by: 932483 on Jun 11, 2012 7:02 PM

Computor restarting while trying to open new software programs!

Similar Messages

Maybe you are looking for