Comunicar con un agente

Que quiero reciclarme en una o 2 clases sobre ADOBE PREMIERE PRO CS4,  porqué ya hice un curso y el profesor era incompetente para mí, un saludo,

Welcome to the forum.
You will probably get better and faster help if you post your question in English.  Thanks.
Jeff

Similar Messages

  • Necesito que alguien me diga como puedo canjear un tarjeta ya que me dice que los no ha sido activado correctamente y me urge ya que es necesito descargar el whatsapp para poderme comunicar con mi jefe cuando esta fuera de la oficina

    Necesito que alguien me diga como puedo canjear un tarjeta ya que me dice que los no ha sido activado correctamente y me urge ya que es necesito descargar el whatsapp para poderme comunicar con mi jefe cuando esta fuera de la oficina

    Bueno, no las puse en su momento pero ahora sí las pongo:
    15), 16) y 17) 3 ERRORES MÁS EN 3 INTENTOS, FALLIDOS, DE COPIAS DE SEGURIDAD UTILIZANDO TIME MACHINE...
    Así que desisto de hacer más copias de seguridad...
    Los datos que pueda archivar y pierda a partir de ahora, esas pérdidas, las voy a responsabilizar a Apple, ya que es un producto suyo, Time Machine, el que no me permite realizar copias de seguridad (hasta las copias de seguridad que me permitió hacer antes de las dos reinstalación del Leopard Original,10.5.4 en mi iMac 8,1, han fallado estrepitosamente, además de haber hecho desaparecer datos muy valiosos para mí).
    Insistiré hasta la saciedad: MI IMAC 8,1 Y OSX LEOPARD LLEVAN YA CASI 3 MESES IMPIDIÉNDOME AVANZAR EN MI TRABAJO LITERARIO, MUSICAL Y FOTOGRÁFICO.
    NOVO PINTO (compositor/productor/escritor/fotógrafo freelance e indignadísimo).

  • How can I cancel my CC subscription? There is no link "Charlar con un agente" at the cancellation pg

    How can I cancel my CC subscription? There is no link "Charlar con un agente" at the cancellation page

    (Let's try this again. The hosts seem to be on a post deleting frenzy for some reason)
    1 - You can remove your CC info from your iTunes account. Select the store in iTunes. Click on your email at the top right and log into your account. Under the CC info, you can select None and it will remove all your CC details.
    2 - Download one of the free songs from iTunes and see if it plays okay. Go to the main iTunes store and look towards the bottom. One of the boxes is labeled Free and you can get a few songs and videos as a free download.
    3 - Go to Start - Control panel - Sounds and audio devices. Select Volume - Speaker settings - Advanced...
    Select the Performance tab and set Hardware acceleration to Full.
    If the original song is still bad, you can request them to look at the song.
    Follow the instructions under (A purchased song sounds bad)here -> http://www.apple.com/support/itunes/store/songs/

  • Ayuda no me permite instalar el parche para poder utilizar After Effects con ios Marverick Ayuda

    Esta es la imagen que me aparece cuando intento instalar

    A falta de más información o datos, lee por favor:
    http://blogs.adobe.com/aftereffects/2013/10/after-effects-cc-12-0-1-update-fixes-crash-on- mac-os-x-v10-9-mavericks.html
    O ponte en contacto con Soporte Técnico en México:
    001-800-249-1039
    Charlar con un agente
    Lunes–Viernes 02:00-15:00 CST, 06:00-19:00 BRT
    Es posible que se apliquen cargos de telefonía móvil. Consulte con su proveedor antes de llamar.
    Argentina 0-800-444-0290
    Brasil 0800 8921704
    El Caribe +1-206-675-6100
    Chile 1230-020-0109
    Colombia 01-800-5-1-80102
    Costa Rica 0-800-011-0910
    México 001-800-249-1039
    Perú 0-800-77989
    Otros países de Latinoamérica 408-352-9228

  • Como comunico un plc s7 400h siemens con labview si utiliza industrial ethernet tcp/ip

    hola a todos
    Necesito comunicar con labview un plc s7 400h  de siemens, utiliza industrial ethernet tcp/ip  me gustarìas saber de que forma lo puedo comunicar, si es necesario utilizar algùn opc o si solamente con los vi's de tcp puedo comunicarlos

    Hola elias 2231, para comunicarte con un PLC a través de Labview básicamente tienes 3 opciones I/O digital, estándares de red, y OPC.
    Utilizar las salidas digitales de tu PLC, y conectaras a una tarjeta DAQ, o a un PAC.
    Para la parte de estándares de red como mencionas tcp/ip, puedes generar una arquitectura cliente servidor, y enviar los datos por tcp/ip, para implementar el cliente o servidor en labview puedes encontrar un ejemplo en find examples.
    Finalmente, y muchas veces la opción mas sencilla es el uso de un OPC Server, para conectarte con este las dos opciones principales son utilizar el modulo de DSC (data and supervisor y control) que es la mas sencilla o por medio de Datasocket en el cual realizarías una conexión a cada elemento de tu OPC
    Por facilidad y para reducir el tiempo de desarrollo yo te recomendaría utilizar el modulo de DSC
    Los siguientes links pueden ser de interés
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/2342
    http://digital.ni.com/public.nsf/websearch/F92C1F2F7B35105B86256DB200628B24
    Saludos
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • NON COMUNICO CON UN SOLO CONTATTO DI WHATSAPP. COME POSSO FARE?

    Da qualche settimana non riesco più a comunicare con un solo contatto in whatsapp. Ho già eliminato e scaricato nuovamente l'applicazione più volte, ho riavvato il telefono più volte ma non funziona lo stesso. Io ricevo i messaggi dal contatto ma lui non legge i miei.
    Come posso fare?

    Google translate:
    From today I appeared IMessage does not send me this problem and does not receive messages when I try to send messages arrive almost at the end of the bar dìinvio and then remains fixed for a while and then I says sending error in red. FaceTime makes me even when they try to call and tells him to call me that are not available I have tried to deactivate and reactivate it with the result that I can not reactivate it tells me that there is an error to try again later .. I do not know what to do I tried everything even restore the backup .. please help me!
    If is likely due to an Apple server problem. Many users arew reporting problems with Messages and FaceTime today.

  • Help calling a web service from pl/sql

    Hi, i have a web service that is called from a php, i needed to do this but from pl sql:
    this is the call of web service from php:
    <?PHP
    //Variables de prueba - Se tienen que tomar los valores de la base de datos, de la compra y el usuario
    $p_id_emec=urlencode("33355555"); //Identificador del sitio dentro de Pago Fácil
    $p_id_operacion=urlencode("151"); //Identificador unívoco de la compra en el sitio
    $p_id_mone_ecom=urlencode("01"); //Identificador de moneda - '01'=pesos - '02=dolares
    //Inicializa Variables de URL
    $serviceName="Pago XX";
    $protocol="http://";
    // DESARROLLO
    $ipUrl="desa.e-pagoxx.com";
    $port=80;
    //Llamada
    $call="/2130/index.php";
    //Abro la conexion al port
    $URLsola = $protocol.$ipUrl;
    //Concatenacion del string
    $txtURL = $protocol.$ipUrl.$call;
    $txtURL .="?p_id_emec=".$p_id_emec;
    $txtURL .="&p_id_operacion=".$p_id_operacion;
    $txtURL .="&p_id_mone_ecom=".$p_id_mone_ecom;
    $txtURL = $txtURL;
    //* Se comunica con el servidor, pasa los datos y recibe el HTML con el comprobante *//
    $fp = fsockopen($ipUrl, $port, &$errno, &$errstr, 30);
    if(!$fp)
    echo "No me puedo comunicar con $serviceName";
    exit;
    else
    $file=@fopen($URLsola,"r");
    $pageData=file($txtURL);
    for($i=0;$i<count($pageData);$i++)
              $sText.=$pageData[$i];
    @fclose($file);
    @fclose($fp);
    echo($sText);
    ?>
    I need to call this webservice from pl sql
    any ideas?
    thanks!!

    Madhu BR wrote:
    You might want to try the webservice call using utl_http specified here : http://orclpps.blogspot.com/2007/12/invoking-webservices-from-oracle-9i-or.html
    Or even to expand on that to deal with responses larger than 32K...
    -- skeleton code
      PROCEDURE p_soap_request(p_username IN VARCHAR2, p_password IN VARCHAR2, p_proxy IN VARCHAR2) IS
        soap_request  VARCHAR2(30000);
        soap_respond  CLOB;
        http_req      utl_http.req;
        http_resp     utl_http.resp;
        resp          XMLType;
        soap_err      exception;
        v_code        VARCHAR2(200);
        v_msg         VARCHAR2(1800);
        v_len number;
        v_txt Varchar2(32767);
      BEGIN
        IF p_proxy IS NOT NULL THEN
          UTL_HTTP.SET_PROXY(p_proxy);
        END IF;
        -- Define the SOAP request according the the definition of the web service being called
        soap_request:= '<?xml version = "1.0" encoding = "UTF-8"?>'||
                       '<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">'||
                       '  <SOAP-ENV:Body>'||
                       '    <m:DownloadRequest xmlns:m="http://www.website.net/messages/GetDetails">'||
                       '      <m:UserName>'||p_username||'</m:UserName>'||
                       '      <m:Password>'||p_password||'</m:Password>'||
                       '    </m:DownloadRequest>'||
                       '  </SOAP-ENV:Body>'||
                       '</SOAP-ENV:Envelope>';
        http_req:= utl_http.begin_request
                  ( 'http://www.website.net/webservices/GetDetailsService.asmx'
                  , 'POST'
                  , 'HTTP/1.1'
        utl_http.set_header(http_req, 'Content-Type', 'text/xml');
        utl_http.set_header(http_req, 'Content-Length', length(soap_request));
        utl_http.set_header(http_req, 'Download', ''); -- header requirements of particular web service
        utl_http.write_text(http_req, soap_request);
        http_resp:= utl_http.get_response(http_req);
        utl_http.get_header_by_name(http_resp, 'Content-Length', v_len, 1); -- Obtain the length of the response
        FOR i in 1..CEIL(v_len/32767) -- obtain response in 32K blocks just in case it is greater than 32K
        LOOP
            utl_http.read_text(http_resp, v_txt, case when i < CEIL(v_len/32767) then 32767 else mod(v_len,32767) end);
            soap_respond := soap_respond || v_txt; -- build up CLOB
        END LOOP;
        utl_http.end_response(http_resp);
        resp:= XMLType.createXML(soap_respond); -- Convert CLOB to XMLTYPE
      END;

  • No puedo suscribirme al adobe creative suite 5 master collection

    Hola, no estoy pudiendo inciar la suscripcion al adobe creative suite 5 master collection
    Tengo el numero de serie que me da correcto pero cuando tengo que poner mi adobe id me aparece el siguiente recuadro.
    Por favor necesito utilizar el photoshop e illustrator porque estoy haciendo una campaña publicitaria y la tengo que terminar este mismo jueves. Hay posibilidad de que me solucionen esto?
    Desde ya muchas gracias.
    Saludos.
    Lara Garay

    Creo que tendrá que ponerte en contacto con el Servicio o Soporte Técnico de Adobe.
    En España:
    http://helpx.adobe.com/es/contact.html?product=creative-suite&topic=managing-my-membership -subscriptions-and-online-services
    Pulsa abajo en Charlar con un agente para ver el número de teléfono.
    Desde que país escribes?
    Si tienes un Adobe ID has probado a entrar en tu cuenta? a partir de ese momento puedes iniciar algun programa instalado?

  • FRM-92101 error in Forms

    Hi everybody,
    I have on my laptop for study purposes Developer Suite 10g, with 9iR2 database and WebUtil 1.6.
    I have a form downloaded from internet in order to see how the TEXT_IO and CLIENT_TEXT_IO function. The form contains the WEBUTIL library.
    When I execute the form I receive the following error:
    "FRM-92101. There was a failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web server log for details."
    In the web server log file I see:
    06/03/29 17:35:14 formsweb: Sessione Forms <5> terminata: impossibile comunicare con il processo runtime.
    06/03/29 17:35:14 formsweb: Forms session <5> exception stack trace:
    java.io.IOException: FRM-93000: errore interno imprevisto.
    Dettagli: No HTTP headers received from runform
         at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
         at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    I canceled the .fmx file, recompile, at execution I receive the same error (the other forms that don't uset WEBUTIL are running without problems).
    What should I do in this case?
    On my laptop I have webutil 1.6. I don't know the version number of the webutil package used in the form found on the internet. Could this be the reason?
    Any help will be appreciated.

    when you try to compile the form, make sure you have attached the webutil.pll to the attached libraries section in the form..
    also, while compiling the form, make sure you compile all PL/SQL code (Program-Compile PL/SQL--All) and then make an fmx
    then try to run the form from web..try this and let us know if you run into same kind of issues..

  • DSEE 6.0  won't start under Cluster 3.2u2

    DS v6.0 originally native package install then install DS v6.3.1 with patch 125278-08, my mistake was that I describe below, then probe with DS v6.0 and I still have the same error.
    pienso que el problema es con el agente de cluster y sus binarios
    I think the problem is with the agent and its binary cluster
    Solaris 10 x86
    bash-3.00# hostname
    solnodo1
    bash-3.00# clrg status
    === Cluster Resource Groups ===
    Group Name Node Name Suspended Status
    ldap-rg solnodo1 No Offline
    solnodo2 No Offline
    bash-3.00# clrs status
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ldap-lh-rs solnodo1 Offline Offline - LogicalHostname offline.
    solnodo2 Offline Offline - LogicalHostname offline.
    ldap-hastp-rs solnodo1 Offline Offline
    solnodo2 Offline Offline
    ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    bash-3.00# clrt lsi ist
    SUNW.LogicalHostname:3
    SUNW.SharedAddress:2
    SUNW.HAStoragePlus:6
    SUNW.ds6ldap
    bash-3.00# df -h
    Filesystem size used avail capacity Mounted on
    /dev/dsk/c1t0d0s0 7.1G 5.4G 1.6G 77% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 1.0G 1.2M 1.0G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    sharefs 0K 0K 0K 0% /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap1.so.1
    7.1G 5.4G 1.6G 77% /lib/libc.so.1
    fd 0K 0K 0K 0% /dev/fd
    swap 1.0G 44K 1.0G 1% /tmp
    swap 1.0G 32K 1.0G 1% /var/run
    /vol/dev/dsk/c0t0d0/sc_32u2_dvd
    1013M 1013M 0K 100% /cdrom/sc_32u2_dvd
    /dev/did/dsk/d2s5 486M 5.5M 432M 2% /global/.devices/node@1
    /hgfs 16G 4.0M 16G 1% /hgfs
    /dev/did/dsk/d8s5 486M 5.5M 432M 2% /global/.devices/node@2
    bash-3.00# cd / /opt/SUNWdsee/ds6/bin/dsadm -V
    [dsadm]
    dsadm : 6.0 B2007.025.1834
    [slapd 32-bit]
    Sun Microsystems, Inc.
    Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 32-bit
    ns-slapd : 6.0 B2007.025.1834
    Slapd Library : 6.0 B2007.025.1834
    Front-End Library : 6.0 B2007.025.1834
    [slapd 64-bit]
    Sun Microsystems, Inc.
    Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 64-bit
    ns-slapd : 6.0 B2007.025.1834
    Slapd Library : 6.0 B2007.025.1834
    Front-End Library : 6.0 B2007.025.1834
    bash-3.00# pkgingo fo -l SUNWldap. -directory-ha
    PKGINST: SUNWldap-directory-ha
    NAME: Sun Java(TM) System Directory Server Component for Cluster
    CATEGORY: system
    ARCH: i386
    VERSION: 6.0,REV=2006.07.07
    BASEDIR: /opt/SUNWdsee
    VENDOR: Sun Microsystems, Inc.
    DESC: Sun Java(TM) System Directory Server Component for Cluster
    PSTAMP: carabosse20060707032224
    INSTDATE: Mar 25 2010 07:27
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 13 installed pathnames
    3 shared pathnames
    4 directories
    8 executables
    998 blocks used (approx)
    bash-3.00# clrs g online ldap-rg
    bash-3.00# clrs status
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ldap-lh-rs solnodo1 Online Online - LogicalHostname online.
    solnodo2 Offline Offline - LogicalHostname offline.
    ldap-hastp-rs solnodo1 Online Online
    solnodo2 Offline Offline
    **ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Starting Online - Completed successfully*.*
    solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    bash-3.00# tail -f /var/adm/messages
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <300> seconds
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<ldap-rg.ldap-lh-rs.1>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Mar 25 09:21:30 solnodo2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.010.010.050:0, remote = 000.000.000.000:0, start = -2, end = 6
    Mar 25 09:21:30 solnodo2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <1800> seconds
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_postnet_stop>:tag=<ldap-rg.ldap-hastp-rs.11>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <1800 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for ldap-ds
    somebody help me
    Edited by: bootbk on Mar 26, 2010 7:26 AM

    DS v6.0 originally native package install then install DS v6.3.1 with patch 125278-08, my mistake was that I describe below, then probe with DS v6.0 and I still have the same error.
    pienso que el problema es con el agente de cluster y sus binarios
    I think the problem is with the agent and its binary cluster
    Solaris 10 x86
    bash-3.00# hostname
    solnodo1
    bash-3.00# clrg status
    === Cluster Resource Groups ===
    Group Name Node Name Suspended Status
    ldap-rg solnodo1 No Offline
    solnodo2 No Offline
    bash-3.00# clrs status
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ldap-lh-rs solnodo1 Offline Offline - LogicalHostname offline.
    solnodo2 Offline Offline - LogicalHostname offline.
    ldap-hastp-rs solnodo1 Offline Offline
    solnodo2 Offline Offline
    ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    bash-3.00# clrt lsi ist
    SUNW.LogicalHostname:3
    SUNW.SharedAddress:2
    SUNW.HAStoragePlus:6
    SUNW.ds6ldap
    bash-3.00# df -h
    Filesystem size used avail capacity Mounted on
    /dev/dsk/c1t0d0s0 7.1G 5.4G 1.6G 77% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 1.0G 1.2M 1.0G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    sharefs 0K 0K 0K 0% /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap1.so.1
    7.1G 5.4G 1.6G 77% /lib/libc.so.1
    fd 0K 0K 0K 0% /dev/fd
    swap 1.0G 44K 1.0G 1% /tmp
    swap 1.0G 32K 1.0G 1% /var/run
    /vol/dev/dsk/c0t0d0/sc_32u2_dvd
    1013M 1013M 0K 100% /cdrom/sc_32u2_dvd
    /dev/did/dsk/d2s5 486M 5.5M 432M 2% /global/.devices/node@1
    /hgfs 16G 4.0M 16G 1% /hgfs
    /dev/did/dsk/d8s5 486M 5.5M 432M 2% /global/.devices/node@2
    bash-3.00# cd / /opt/SUNWdsee/ds6/bin/dsadm -V
    [dsadm]
    dsadm : 6.0 B2007.025.1834
    [slapd 32-bit]
    Sun Microsystems, Inc.
    Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 32-bit
    ns-slapd : 6.0 B2007.025.1834
    Slapd Library : 6.0 B2007.025.1834
    Front-End Library : 6.0 B2007.025.1834
    [slapd 64-bit]
    Sun Microsystems, Inc.
    Sun-Java(tm)-System-Directory/6.0 B2007.025.1834 64-bit
    ns-slapd : 6.0 B2007.025.1834
    Slapd Library : 6.0 B2007.025.1834
    Front-End Library : 6.0 B2007.025.1834
    bash-3.00# pkgingo fo -l SUNWldap. -directory-ha
    PKGINST: SUNWldap-directory-ha
    NAME: Sun Java(TM) System Directory Server Component for Cluster
    CATEGORY: system
    ARCH: i386
    VERSION: 6.0,REV=2006.07.07
    BASEDIR: /opt/SUNWdsee
    VENDOR: Sun Microsystems, Inc.
    DESC: Sun Java(TM) System Directory Server Component for Cluster
    PSTAMP: carabosse20060707032224
    INSTDATE: Mar 25 2010 07:27
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 13 installed pathnames
    3 shared pathnames
    4 directories
    8 executables
    998 blocks used (approx)
    bash-3.00# clrs g online ldap-rg
    bash-3.00# clrs status
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ldap-lh-rs solnodo1 Online Online - LogicalHostname online.
    solnodo2 Offline Offline - LogicalHostname offline.
    ldap-hastp-rs solnodo1 Online Online
    solnodo2 Offline Offline
    **ds--opt-iplanet-ds-63-instances-PCUS-LDAP solnodo1 Starting Online - Completed successfully*.*
    solnodo2 Offline Offline - Successfully stopped Sun Java(TM) System Directory Server.
    bash-3.00# tail -f /var/adm/messages
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <300> seconds
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<ldap-rg.ldap-lh-rs.1>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Mar 25 09:21:30 solnodo2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.010.010.050:0, remote = 000.000.000.000:0, start = -2, end = 6
    Mar 25 09:21:30 solnodo2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ldap-lh-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <300 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, timeout <1800> seconds
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 944595 daemon.notice] 39 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_postnet_stop>:tag=<ldap-rg.ldap-hastp-rs.11>: Calling security_clnt_connect(..., host=<solnodo2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Mar 25 09:21:30 solnodo2 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <ldap-hastp-rs>, resource group <ldap-rg>, node <solnodo2>, time used: 0% of timeout <1800 seconds>
    Mar 25 09:21:30 solnodo2 Cluster.Framework: [ID 801593 daemon.notice] stdout: no longer primary for ldap-ds
    somebody help me
    Edited by: bootbk on Mar 26, 2010 7:26 AM

  • Network error. load error.

    hello good afternoon. When uploading my files folio builder cut and I get network error. load error.
    How can this be?
    If I give try again still loading, but never finishes.
    I have adobe indesign CC with the latest updates.
    Thank you very much to anyone who can or try to help

    Hola Esther,
    Me temo que el problema no está en tu conexión sino en los servidores de Adobe, o en su red. De todas maneras intenta poner tu comentario aqui:
    Inicie sesión en el panel de Digital Publishing Suite para obtener información de contacto:
    http://digitalpublishing.acrobat.com
    (que supongo deberá hacerlo en inglés, puedes ver temas similares al tuyo, con toda seguridad)
    Aunque seguramente se más relevante esta página, que creo confirma lo que te indicaba:
    http://status.adobedps.com/
    Lo más cómodo y quizás practico sea que hables con Soporte Técnico:
    Charlar con un agente 
    de Lunes a Viernes de 9:00 a 17:00 CET
    Es posible que se apliquen cargos de telefonía móvil. Consulte con su proveedor antes de llamar.
    900 810339
    Permíteme recordar para acabar, y no tiene nada que ver con el tiempo en subir tus archivos, que no para probar un folio, sino para generar la aplicación que luego se puede llevar al Apple Store, necesitas utilizar un Mac, con el OSX y las herramientas de XCode instaladas, para lo que te tienes que darte de alta como Apple Developer, por unos 75 euros al año.

  • C # Aplication connection with SAP Windows CE

    Hi,
    I have a problem with an aplication that I've made in Visual Studio C#. The problem is the next:
    I've made an aplication that connects with SAP and passes some data. This aplication works well on any computer but I've got a problem when I tried tu convert the code and use it in a hand help pc. The version of OS of the hand held pc is Windows CE 5.0 and the error that I get when I execute my software is something related with the COM and the Class ID, the error says the next:
    "COM object with CLSID '{B24944D6-1501-11CF-8981-0000E8A49FA0}' cannot be created due to the following error: Class not registered ."
    I think that the problem could be with some dll that I don't have installed on the hand held pc but I don't really know which or what exactly.
    Does anyome know anything about all of these??
    Thanks.

    Hi Julien,
    To do the connection on a normal PC I include in the code the next references: SAPLogonCtrl and SAPFunctionsOCX.
    Once they are included in my code I do the next:
    private SAPLogonCtrl.SAPLogonControlClass saplogon;
    private SAPLogonCtrl.Connection conexion;
    private SAPFunctionsClass func = new SAPFunctionsClass();
    SAPFunctionsOCX.IFunction sapfu = null;
    Then I have a method to connect to SAP and other to pass the data. The one that connects to SAP is:
    private void Connect_SAP()
    saplogon = new SAPLogonCtrl.SAPLogonControlClass();
    saplogon.User = usuSAP;//Usuario SAP.
    saplogon.Password = passSAP;//Contraseña del usuario de SAP.
    saplogon.Language = "ES";//Idioma.
    saplogon.Client = cliSAP;//Mandante a través del cual nos vamos a comunicar con SAP.
    saplogon.ApplicationServer = "10.10.20." + serSAP;//Ip en donde se encuetra el Servidor de SAP.
    saplogon.System = sysSAP;//Entorno al que vamos a acceder.
    saplogon.SystemNumber = System.Convert.ToInt16(num_Sis);
    conexion = (SAPLogonCtrl.Connection)saplogon.NewConnection();
    conexion.Logon(0, true);
    DateTime hora = DateTime.Now;
    if (conexion.Logon(0, true)==true)
    MessageBox.Show("Conectado a SAP");
    *Error1.Text += "SAP:Conexion establecida con exito" + "
    Write_log("SAP", "Conexion establecida con exito",hora);
    else
    MessageBox.Show("No establecida conexión con SAP");
    *Error1.Text += "SAP:No se ha establecido la conexion con exito" + "
    Write_log("SAP", "No se ha establecido la conexion con exito", hora);
    func.Connection = conexion;
    if (sysSAP == "PRO")
    labelSystema.Text = "Productivo";
    else
    labelSystema.Text = "Desarrollo";
    Now the problem is that I want to use these code to make the same connection on a handheld PC but it doesn't work, when I execute the compilation on the handheld PC I get the next error:
    "COM object with CLSID '{B24944D6-1501-11CF-8981-0000E8A49FA0}' cannot be created due to the following error: Class not registered ."
    When this happens the compilation stops and it shos me the line in the code thar points to:
    saplogon = new SAPLogonCtrl.SAPLogonControlClass();
    I don't know why I get this error, I think that it could by that I'm not using the correct dll for a handheld PC that uses a Windows CE 5.0 O.S.. My question is: do I have to get a new dll that works on a handheld PC? or is it not working for any other reasson.
    Thanks for your help.

  • Create context index problem

    When I try to create a context index in a table I have the following error:
    create index pruebaindex on pruebactx(TEXTO) indextype is ctxsys.context
    2 ;
    create index pruebaindex on pruebactx(TEXTO) indextype is ctxsys.context
    ERROR en lmnea 1:
    ORA-29855: se ha producido un error en la ejecucisn de la rutina
    ODCIINDEXCREATE
    ORA-20000: Error de interMedia Text:
    DRG-50704: el listener de Net8 no se esta ejecutando o no puede iniciar
    procedimientos externos
    ORA-28575: no se ha podido abrir la conexisn RPC con el agente de procedimiento
    externo
    ORA-06512: en "CTXSYS.DRUE", lmnea 126
    ORA-06512: en "CTXSYS.TEXTINDEXMETHODS", lmnea 54
    ORA-06512: en lmnea 1
    I ve tried to configure listener for call external procedures using the Ora Admin manual indications and I think that a second listener is running for RPC connections but the create index command give me the same error.
    Thanks

    The temp files should get deleted after each file is processed.
    "Forever" is meaningless. How long does it take, and for how many documents? Text indexes do take a long time to create - can be measured in days in some situations.
    The errors you're seeing in ctx_user_index_errors are probably caused by damaged documents - files that the filter thinks it recognizes, but then fails to process according to the expected layout for those documents. If there are only a few of these, then I wouldn't worry too much - if there are lots (> 1% of your total, perhaps) then it's definitely worth investigating further.
    Scanned documents stored as images (jpegs, tiffs, etc) cannot be indexed. Generally the filters should recognize and skip such documents without errors.

  • Problems with webutil FRM -92101- 1.0.5 Production - forms 10g

    I've installed webutil according with the webutil user's guide.
    I've also sign he .jar file.
    I have not made the configuration of the database with the webutil_file_transfer o webutil_db package becouse i don't need to use the file transfer utility.
    I 've tested a simple form with webutil.pll and .obj subclass with the devsuite enviroment and with a server with AS 10g from two client browser pc and all work fine.
    But after when i tried to test again the form it doesn't work in no pc client (with the server and eith the devsuite server).
    Without webutil.pll and obj the forms work fine.
    I've this error: FRM-92101: there where a failure .....
    I 've this message in java console:
    JInitiator: Versione 1.3.1.17
    Uso della versione JRE 1.3.1.17-internal Java HotSpot(TM) Client VM
    Directory principale utente = C:\Documents and Settings\wolverine1
    Configurazione proxy: nessun proxy
    JAR cache enabled
    Location: C:\Documents and Settings\wolverine1\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Cached copy of http://ggdell2:8889/forms90/webutil/webutil.jar is out of date
    Cached copy: 1-ott-04 17.26.21
    Server copy: 4-ott-04 9.07.20
    Loading http://ggdell2:8889/forms90/java/f90all_jinit.jar from JAR cache
    Downloading http://ggdell2:8889/forms90/webutil/webutil.jar to JAR cache
    Cached copy of http://ggdell2:8889/forms90/webutil/jacob.jar is out of date
    Cached copy: 1-ott-04 17.26.44
    Server copy: 4-ott-04 9.07.38
    Downloading http://ggdell2:8889/forms90/webutil/jacob.jar to JAR cache
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Versione Applet Forms: 9.0.4.0
    RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
    oracle.forms.net.ConnectionException: Sessione Forms <1> terminata: impossibile comunicare con il processo runtime.
         at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
         at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
         at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
         at oracle.forms.net.HTTPNStream.flush(Unknown Source)
         at java.io.DataOutputStream.flush(Unknown Source)
         at oracle.forms.net.StreamMessageWriter.run(Unknown Source)     
    Who can help me ?

    THe Java Console would indicate that you're not using the right CFG settings - you should see the WebUtil Initialisation messages

  • Modbus serie por rs485 Maestro-Esclavo

    Hola Buenas:
    Estoy trantando de escribir y leer los registros de un variador de frecuencia mutsubishi Fr D740, se conecta a traves de rs485 al pc y necesito utilizar a Labview como Maestro para enviar un codigo ya que el variador queda como esclavo, por lo que simplemente necesito escribir un codigo en Modbus RTU al variador y poder leer lo que me envia.
    Muchas Gracias

    Hola ZeInK
    Hay 2 maneras de comunicarnos con un dispositivo por Modbus RS 485:
    1) El API de Modbus incluye ejemplos de comunicación por medio de Modbus Serial. Este API se incluye en LabVIEW 2014, pero si tienes una versión anterior de LabVIEW lo puedes descargar de la siguiente liga: https://decibel.ni.com/content/docs/DOC-30140
    2) Los I/O Servers de LabVIEW, que se instalan con los módulos de LabVIEW DSC o LabVIEW Real-Time se pueden comunicar con los dispositivos Modbus. En esta liga explican cómo utilizarlos: http://zone.ni.com/reference/en-XX/help/371618J-01/lvmve/create_mb_ioserv/
    También, me gustaría confirmar algunos datos:
    - El Dispositivo que tienes es RS 485 estandar o RS 485 2-wire?
    - Ya cuentas con un puerto RS 485 para hacer la comunicación?
    Hi ZeInK.
    There are 2 methods for communicating with Modbus RS 485
    1) The Modbus API includes examples to communicate through Modbus-Serial. This API shiin LabVIps with LabVEW 2014, but if you have a previous version you can download it from this link: https://decibel.ni.com/content/docs/DOC-30140
    2) Using the Modbus I/O Servers, which install with LabVIEW DSC or Real-Time Modules. You can find examples in the example finder, and here's a quick guide on how to create them: http://zone.ni.com/reference/en-XX/help/371618J-01/lvmve/create_mb_ioserv/
    Aldo H
    Ingenieria de Aplicaciones

Maybe you are looking for