Con apple hardware test rilevo questo errore nella memoria 2MEM/1/4 DIMM1/J4001/1/ e qualche altra volta 2MEM/104/4 DIMM1/J4001 ritengo siano problemi ad una delle memorie ram aggiuntive. che debbo fare ? è da sostituire? o c'è un modo di escludere l

con apple hardware test nel mio IMAC G5, rilevo questo errore nella memoria 2MEM/1/4 DIMM1/J4001/1/ e qualche altra volta 2MEM/104/4 DIMM1/J4001 ritengo siano problemi ad una delle memorie ram aggiuntive. che debbo fare ? è da sostituire? o c'è un modo di escludere il o i banchi di memoria interessati?

Similar Messages

Apple Hardware Test detected an error code... now what?

I ran AHT and I got this message:
Alert! Apple Hardware Test has detected an error
4M0T/1/40000003:HDD-1424
Can anyone shed some light on this?
My early 2008 iMac has been having issues with the spinning wheel when opening and using applications. I can't seem to pinpoint when it happens, but many times I will have to shut down or power the machine off to stop the wheel of death from spinning.
Any help would be greatly appreciated.

bump... any one else?
I was able to boot the machine up today and I am noticing the top of the machine is getting very hot. Could this be the overheating issue I have read about here in discussions?
I was also able to transfer files to an old eMac, so I am backed up, but that transfer slowed after the machine warmed up. I would shut the iMac down and let it cool... it then transfered great while cool but slowed when it heated up....
I am taking it in to a local authorized repair shop Monday morning..... just hoping for some more thoughts before then.
Thanks!

Apple hardware test detected an error.

Well, I'm back (see older post) . Just ran Apple hardware test and it says it detected an error. What should I do from here??
I using the original Tiger discs which came with the computer. The Leopard disk was just a drop-in CPU disc they gave me to upgrade from (when I purchased the iMac in 07). Can I just use the Tiger disc again to run Disk Utility and try to fix the HD?
Nancy

Attempted to repair disk via the Disk Utility on the Tiger disc.
Now receive new messages:
under Verify & Repair Macintosh HD:
Error: The underlying task reported failure on exit.
uner 1 non HFS volume checked:
1 volume could not be repaired because of an error.
I think I'm toast. Can anyone tell me what to do at this point?
Thanks,
Nany

Apple Hardware Test detected following error: 4ROM/2/40000008: 0x84a18698

My laptop doesn't wake up at times, doesn't power on.
Once it powers on, then no issues is found.
However, after turning off, difficult to power on.

I am using
Mac OS X Snow Leopard (version 10.6) actually. mistakenly selected OS 9

Where do I find a list of error meanings for Apple Hardware Test?

I think My 27" mid 2011 iMac has a faulty thermostat on the ODD. I ran the Apple Hardware Test and the error message was 4M0T/4/40000002:ODD-0. Where can I learn what this error code actually means?

That error message means that there is a problem with the optical drive fan motor. I recommend you to make a backup of your files and take the Mac to an Apple Store or reseller in order to prevent any problem.
Here you can find a list of Apple Hardware Test messages -> http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/

What does Apple Hardware Test error code 4MEM/1/40000000:OX3bb6b190 mean?

Mozilla kept crashing so I did the Apple Hardware Test and got error code 4MEM/1/40000000:OX3bb6b190. I reinstalled MacOs 10.4.4 (after saving the important stuff to disk of course) and it took about 10 tries to get the 2 disks installed. After the installation, I tried to update to 10.4.5, and when I restarted, the screen was blank. The only disk the computer will start with now is the No. 1 installation disk. What can I do?

Hi
A MEM error code generally indicates a faulty RAM Module. In my experience most RAM manufacturers offer at least a 5 year warranty of their RAM products. Some warranties are for 10 years. Sometimes reseating (taking it out and putting it back in again - properly) the Module will 'cure' the problem. Run AHT afterwards if you try this option first.
If you can remove the offending module and still have enough RAM to be able to do what you need to do then do so.
If not take it to your nearest Apple Repair Specialist who should fix it for you or replace the faulty module yourself and deal with the RAM manufacturer directly.
Judging by the footer to your post you don't seem to have had much luck with this model have you?
Tony

G5 Full Speed Fans/ The Apple Hardware Tests Error Code

Since yesterday My DP1.8 G5's fans are max speed like jet engine. I tried PMU resets , Disk warrior. But nothing helps. The Apple Hardware Test gave me error code of "post/192/0" . Do you guys know what does this error code mean?
Thank you.

Hi-
Welcome to Discussions!
I think thast the error is related to the "Power On Self Test", or POST. When you start the machine, are there any beeps, or power button LED flashes? If there is a POST error at startup, the power LED would flash in cadence with the beeps..
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Do you have any new RAM installed?

What is cause for green screen when Apple Hardware Test is assessing memory

My PowerBook G4 1.33 GHZ with 256MB RAM was giving messages about needing to restart on each start-up attempt. Of interest when the the AirPort wireless card (that had not been working) was removed, the restart problem resolved. When the AirPort card was re-inserted, it functioned correcly allowing connections to a wireless router. The restart message did not return and the computer appeared to be functioning normally. Also of note I had reinstalled the system software and had run multiple updates thinking that the intial restart error messages were related to a system software problem. Now, when I run the Apple Hardware Test the first three items "pass" (AirPort, Logic Board, Mass Storage) but, after about 3 minutes of testing the nest topic, "Memory," the screen turns green and blue (reminiscent of the dreaded "blue screen" in Windows). I have to power off the computer and it will restart without problems. Of note the Apple Hardware Test did the same thing before I reinstalled the system software and re-installed the AirPort card. Does this point to a problem with the built in RA<?<br>
PowerBook G4 1.33 GHZ Mac OS X (10.3.9) 256 MB RAM built in
PowerBook G4 1.33 GHZ Mac OS X (10.3.9) 256 MB RAM built in

Thanks Rodney! Your explanation was correct. I had not waited long enough for the test process to complete. When I watched carefully, it was not until just after the memory section and the beginning of the V RAM testing that the screen started to change apperances. There were multiple changes until finally the original dialogue box reappered. I had previously been too impatient.

I can"t open the apple hardware test from the applecare support website

i received the applecare training program for my birthday and while exploring the applecare service source website i found a image file of the apple hardware test (AHT) for each model along with a pdf of the service manual and a pdf of the AHT service codes. The problem i'm having is, i cant open the image of the AHT.

After downloading that image, open it and it will show up mounted in your desktop. Then, open Disk Utility (in /Applications/Utilities), right-click your Apple Hardware Test image in the sidebar and burn it to a DVD. Finally, start your computer from the disc, holding the C key, so Apple Hardware Test should start, always that you have the correct version for your computer.
You have Apple Hardware Test in the Applications disc that came with the computer. In that case, hold the D key while your computer is starting

What does it mean when it says "Failed" in the Apple Hardware Test?

I was checking my diagnostics and i noticed that it said failed in the Apple Hardware Test please help.
THanks

Bad memory. Make an appointment at an Apple store, or run this:
http://www.memtestosx.org/joomla/index.php

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

Hello Everyone,
I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Any suggestions are welcome and appreciated.
Thank you for your time.

You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive.
THe 4SNS error is a sensor error. You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less. You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

Apple hardware test error 4mem/9/40000000: 0x8475d598

Any help would be appreciated I'm at work and my MBP crashed twice (Running Traktor Pro 2 with Drobo Mini as an external HD via Thunderbolt. second display daisy chained on VGA with a rotating desktop image to the TV's ) ...Just got this error code from my late late 2011 15in MBP after it randomly restarted and I ran the hardware test
apple hardware test error 4mem/9/40000000: 0x8475d598
This was after it crashed earlier and I got this report:
Anonymous UUID:       5948A12D-654D-DE02-D43C-4073A8690165
Sat Jun 21 17:31:41 2014
panic(cpu 0 caller 0xffffff8000a2ebe9): "Spinlock acquisition timed out: lock=0xffffff8024478110, lock owner thread=0x8000000000000000, current_thread: 0xffffff8025f64cf0, lock owner active on CPU 0xffffffff, current owner: 0x8000000000000000"@/SourceCache/xnu/xnu-2422.100.13/osfmk/i386/locks_i386.c:36 5
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb5f3ec0 : 0xffffff8000a22fa9
0xffffff81eb5f3f40 : 0xffffff8000a2ebe9
0xffffff81eb5f3f70 : 0xffffff8000ac989d
0xffffff81eb5f3fb0 : 0xffffff8000af3c76
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:     0x0000000000800000
Kernel text base: 0xffffff8000a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 18623716072818
last loaded kext at 18480408803348: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f833c5000, size 49152)
last unloaded kext at 18566085554385: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f833c5000, size 32768)
loaded kexts:
com.TrustedData.driver.VendorSpecificType00 1.7.0
com.drobo.SCSI.ThunderBolt 1.1 [66012]
net.kromtech.kext.Firewall 2.3.6
com.attotech.driver.ATTOiSCSI 3.4.1b1
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.15
com.apple.iokit.IOBluetoothSerialManager 4.2.4f1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 2.6.1f2
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX3000 1.2.2
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.5.26
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.kext.AMD6000Controller 1.2.2
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 666.4.0
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.IOBluetoothHIDDriver 4.2.4f1
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.driver.AppleUSBAudio 2.9.5f4
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.4f1
com.apple.driver.DspFuncLib 2.6.1f2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.20
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.5.26
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d11
com.apple.driver.AppleSMC 3.1.8
com.apple.kext.AMDSupport 1.2.2
com.apple.AppleGraphicsDeviceControl 3.5.26
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.1f2
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.1f2
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 677.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x857F, 0x483634314755363746393333334700000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x857F, 0x483634314755363746393333334700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
PCI Card: scsi, SCSI Bus Controller, Thunderbolt@195,0,0
Serial ATA Device: Samsung SSD 840 EVO 250GB, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Duet USB
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
Thunderbolt Device: Mini, Drobo, 1, 26.3

The Apple Hardware Test error indicates a RAM issue. Install the original RAM and see if that improves the situation.
Also these items may perhaps be conributing causes:
TrustedData.driver.VendorSpecificType00 1.7.0
.drobo.SCSI.ThunderBolt 1.1 [66012]
.kromtech.kext.Firewall 2.3.6
attotech.driver.ATTOiSCSI 3.4.1b1
Ciao.

Con apple hardware test rilevo questo errore nella memoria 2MEM/1/4 DIMM1/J4001/1/ e qualche altra volta 2MEM/104/4 DIMM1/J4001 ritengo siano problemi ad una delle memorie ram aggiuntive. che debbo fare ? è da sostituire? o c'è un modo di escludere l

Similar Messages

Maybe you are looking for