Con l'aggiornamento di imovie tutti i video sono mossi

qualcuno mi Puo Aiutare ?
as

Andrea,
MyItalian is terrible - Do you speak English?
As I understand it, your computer is running Snow Leopard, and you want to know about installing Lion?
I hope this is helpful:
1. Back up your computer before doing any system changes.
2. Installing Lion will replace your old Snow Leopard system folder.
3. If you want to keep your old system, you will need to partition your hard drive before installing Lion.
4. If you find you don't like Lion, you can go back to the old system by reinstalling Snow Leopard over Lion using your original disc that came with your computer.

Similar Messages

Con la nueva versión de Imovie 11 los videos que quiero importar de mi cámara Sony DCR-SR35E se ven pero no se oyen. ¿ Cómo puedo solucionarlo ? o en su defecto ¿como puedo volver a la versión anterior?

Con la nueva versión de Imovie 11 los videos que quiero importar de mi cámara Sony DCR-SR35E se ven pero no se oyen. ¿ Cómo puedo solucionarlo ? o en su defecto ¿como puedo volver a la versión anterior?

la ventana que muestras parece ser eque es el Finder del OSX.
No tengo abierto el Mac, para mirar una posible razón.
Asi como alternativa te sugiero que abras Adobe Bridge.
y arrastres el icono de la carpeta de las imágenes sobre la linea del path (en la parte superior izqda. justo debajo de la fila de iconos)
Aparecerán todas las imágenes de esa carpeta con sus vistas previas.

Can i connect a Samsung VP-D381 to iMovie to import videos?

I have recently bought a Samsung VP-D381 Mini DV camcorder, and have just tried to connect it to iMovie to import a video that i have just recorded, only to find that Samsung do not have any software or drivers for the Apple OS...
I was wondering if anyone had any suggestions on how i could get this to work?
Thanks

Hello,
(I posted the same answer to a similar thread)
I have the same camcorder and same issue, though with iMovie '09.
Symptoms on my Samsung VP-D381 are :
I can import when in Camera mode (live capture)
I cannot import what has been recorded on tape (import window stays blue)
I can forward and rewind and stop.
I found a trick I hope will be useful for you :
open iMovie.
without connecting it yet, put your Panasonic on "Play".
when video plays, plug the DV cable in.
iMovie opens the video import window and then you should see the tape playing.
press the "Import" button to capture the DV stream.
Let me know if you find other ways to get it to work. I'm quite frustrated Samsung cannot make a DV camcorder work with iMovie, 14 years after DV went out!
Pierre
iMac G5 Mac OS X (10.5.6)

Does iMovie support 4K video editing and export?

Does the latest version of iMovie support 4K video export? I have seen that it supports XAVC-S from Sony, but I do not know if 4K XAVC-S is supported too.
Thank you for answer.
P.S.: If not, would it be able to in near future?

Hi Tomas J
the problem is that if you have nothing but 4k XAVC clips in the card and you try to import from the Import window
FCPX will not see the card as a Camera and only as a Volume. You cannot do Camera archives from a volume but you are able to do Camera Archives if it is detected by FCPX as a Camera. The reason I like to do Camera Archives is that that way I transfer the whole content of the SD card in one pass to a container that I can transfer to any HD that is hooked up or connected to the computer usually avoiding the main or boot drive and I can bring that container or Archive into the Favorites column of the import window pf FCPX ,opened and start importing from there. This has two main advantages 1 Once I create the archive and have all my clips in its container I can wipe the card clean and start using it again, 2 If I placed it in the Favorites colum of the import window I can open it and start importing to FCPX as if it was any card, Also you can move this container or archive any where as long as it is connected to your computer and if you have finished and don't plan to use it anymore you can store it for keeps with all the original files you shot in any storage for keeps. You also preserve the file structure of the SD card That is why I need FCPX to recognize the SD card as a CAMERA AND NOT AS A VOLUME when using 4K XAVC-S clips. The way you are doing it may be ok up to a point only for a few clips here and there but if you're preserving or making a Movie of you vacation or other events that would be an Immense task.
The Sony AX-100 camera that you have has the same file structure that the AX-33 if you import nothing but 4K XAVC-S clips without mixing mp4 or AVCHD ON THE SAME CARD Have you found the same problem????
Thank You,
AppleLou

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

I haven't launched iMovie in a while, and I've used iPhoto to import many videos from my iPhone's Camera Roll since the last time I launched and used iMovie.
iMovie prompted me to create/update the thumbnails for my iPhoto videos, along with indicating no iPhoto videos will be available with iMovie until this is completed.
Not sure how to do this manually, but this may be your problem.

Can I use iMovie to commercial videos on youtube?

Hello! I have a question,
Can I use iMovie to commercial videos on youtube?
Yours!

Hello przemlo
Yes, you can use iMovie for either for Mac or iOS to make movies and publish them to YouTube. Check out the articles below to know more on how to publish the video.
iMovie '11: Publish a movie to YouTube, Facebook, Vimeo, or CNN iReport
http://support.apple.com/kb/PH2279
iMovie (2013): Share from “iMovie” Theater
http://support.apple.com/kb/PH14740
iMovie for iOS (iPad): Share to YouTube
http://support.apple.com/kb/PH3233
iMovie for iOS (iPhone, iPod touch): Share to YouTube
http://support.apple.com/kb/PH3350
Regards,
-Norm G.

Importing from Sony DV into iMovie & getting Darker video image

Importing from Sony DV (Video quality looks great on video LCD screen) into iMovie & getting Darker video image. After I import into iMovie the video image is darker, making in harder to edit. I appreciate any help with understanding how I can improve the video quality when importing.
Thank you

Welcome to discussions!
You may just need to adjust your monitor.
http://www.danslagle.com/mac/iMovie/tips_tricks/6008.shtml
Plus, it will look better on a TV than your monitor.
Sue

IMovie Skipping After Video Import?

I am using iMovie 8.0.5 and a Black MacBook. I have a MiniDV Panasonic camcorder that I bought a couple of years ago. It takes good video, but when I try importing it into iMovie, the imported video skips every so often. I am using a FireWire 400 cable between my computer and camcorder. I have quit all of the other programs when I am importing.
Does anyone have any suggestions? Thanks in advance!
Dave

I found a work-around for this problem. I tried importing to my MacBook Pro's internal drive instead of the external drive I'm using to store my video footage. From there, iMovie '09 lets me copy the imported footage to the external drive. It's not the solution I prefer, but it works for now.
Has anybody else even had this problem? I've seen very few reports of this problem and even fewer suggestions for possible solutions. BTW I'm running Snow Leopard's 64 bit kernal. Could that be a factor here?

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

Sharing iMovie not taking video with it for iDVD

I have created a movie in iMovie that has video that was recorded and some still shots at the end. When I am in iMovie and review what I have done, the entire movie is there (opening title shot, video & sound, still shots with song from iTunes playing in background). When I share the movie so I can create an iDVD, it seems to be doing everything that I need. Then when I go into iDVD to make a project, the movie that I shared is there and everything is contained in the movie EXCEPT the video part! I have all of the audio that goes with the video, the titles, still shots, etc. What am I do wrong???? Thank you for your help because it is driving me nuts to not be able to figure it out.

Then when I go into iDVD to make a project, the movie that I shared is there and everything is contained in the movie EXCEPT the video part! I have all of the audio that goes with the video, the titles, still shots, etc. What am I do wrong?
Check the compression format of you source video. If it is Apple Animation or Apple Video, you have found your problem.

IMovie 11' issues - video glitches

I have video footage I shot that plays perfectly within the Qtime player. (full HD on my Canon camcorder)
When importing into iMovie 11', the video has severe glitch defects. any thoughts?

Hi
• Was it recorded in p50 or p60 - If so - iMovie can not use it.
It needs to be converted to i50 resp i60 first.
• Did You Optimize Your Clips.
Some says if helps other writes that it is the culprit.
Have no such material to test - so it's just my thought (from reading lot's of other posts in this forum)
Yours (thinking) Bengt W

Come scaricare app store su imac.? Ho provato con l'aggiornamento software, ma non va...

non riesco ad installare l'app store sul mio imac... ho provato con l'aggiornamento software, ma non va. qualcuno può darmi una mano?
Grazie

The problem was that to filesystem were formatted in "Mac OS X Extended Case-Sensitive Journaled" but it shouldn't be "Case-Sensitive". I did a backup with Time Machine, formatted the HDD (SDD in my case) without choosing the "Case-Sensitive" option. After restore all my data by Time Machine the game works perfectly.

I made an iMovie with mp4 video & shared to iDVD --

I created an iMovie using mp4 video, then shared it to a iDVD to burn it. When I tried to burn it, I got an "error in movie encoding". How can I fix this and make it work? thanks.

iMovie: http://www.apple.com/support/imovie Then click on link to Communities after looking thru tech support articles and troubleshooting.
Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro

New 27 iMAC keeps crashing iMovie and freezing videos on YouTube & Quicktime

We just got a new Sept 2013 iMac three days ago, purchased refurbished from the Apple Store online. The whole point of the purchase was to be able to use iMovie to thoroughly edit videos for our YouTube channel, use garage band, lots of internet surfing and video watching etc. We spent the extra dollars to get what we thought was the most improved version of the iMac with all the souped up specs in order to avoid any hassle and headaches from a lack of performance. Here's what we have:
3.4GHz quad-core Intel Core i7
27-inch (diagonal) LED-backlit display with IPS technology; 2560-by-1440 resolution
8GB (two 4GB) of 1600MHz DDR3 SDRAM
1TB hard drive (We have only used 80 GBs of it so far, so plenty of space left)
NVIDIA GeForce GTX 775M graphics processor with 2GB of GDDR5 memory
720p Camera & Mic
OS X 10.9
We're feeling a bit duped now as this seems to have turned out to just be a big expensive piece of junk. Here are our problems:
- Firstly, thank goodness that we had our own Logitech HD camera/mic left over from our PC because the "HD camera" built in to the iMac is worse in quality than my old blackberry curve. Grainy, lack luster, mic has sharp and distant sound, really really bad and false advertisement.
- In the middle of using iMovie (iMac came preinstalled with the newest one, i think its 10?), it will stop responding properly or will crash and close, we wont even have any other programs running.
- When opening Quicktime to record a new video, in the middle of a recording or while the recording window is idle, it will start glitching - flashing between live footage and a freeze frame repeatedly. The only way to stop it is to quit out Quicktime and open again and try to record quickly, or in some cases we have to completely restart the iMac, which then still randomly in the middle of a recording or idle window it will continue to flash and glitch. (You can view an example here in the last minute of one of our videos, we tried to make it work and kept the take since we were doing our outro music dance, but it totally ***** when this happens randomly during our content portion and we have to redo recording. http://youtu.be/MAJzaEShJGw?t=4m34s )
- When watching YouTube videos, the computer takes a while to respond to a command, like if we click on a certain part of the video, it will not load it until we press the pause/play button a few times and wait. Also at the beginning of a video it will start glitching and freezing again, similar to how we explained above in the quicktime, but faster.
If you are familiar with what could be the problem or have any advice, PLEASE HELP, we are concerned that after dropping so much money within just 3 days of use, this iMac is not performing flawlessly in the areas that we most needed and want to know if these issues are common and fixable or if its a defect that would require we send this thing back immediately. We did not get apple care and would hate to have wasted money that we really dont have on a glitchy crashing huge piece of junk.
Want to mention a few other pros and cons unrelated to our issues, for those who may be considering buying one too:
PROS:
- The Magic mouse is really great, particularly because of the scrolling and zooming gestures. (Though sometimes i accidentaly swipe in a browser and go back to a previous page losing any information that was input on the page i was originally on, for example, i had to retype this whole apple imac inquiry because i swiped backwards by mistake and the whole form cleared! annoying, wish the horizontal swipe navigated between tabs instead of going through the page view history.)
- When the imovie is not crashing, after watching some tutorials and making a few vids, its a really greatly improved program from the '09 version we used to use. I import and edit videos much faster now, and footage does not freeze or take time to load while im dragging and dropping, it is immediately responsive.
- Love using the Talk to text function (like Siri) by pressing "fn" twice. Use this to write long emails and papers with ease. Would like to see a "Speak" read back option that allows for text to be selected and read back (like Siri on iPad)
CONS:
- The text is SO small everywhere and there is no option to exactly set text size across the whole system, only option given is to set a different resolution which lessens the quality of the screen with pixelation, and some programs give you the option to set custom sized text in their individual preferences.
- Sometimes in both iMovie & Garageband, simple automated functionality will stop working, for example in iMove, when certain screens or images are dragged and dropped to the work area by the activity bar (i dont know what else to call it, the line that rolls across during playback or stays put when pressing spacebar) usually, that screen or image will click into place to align with the activity bar and will highlight the bar yellow to further communicate that alignment before you drop it, but after extended use in a session, that snapping into alignment when adding items stops working. Or sometimes you can drag and drop the ends of a title screen to adjust/trim the clip, but after extended time that too stops responding and does not let the cursor turn into that arrow that allows you to trim or extend, until after many frustrated clicks or a quit and restart.
- When sharing/exporting a video from iMovie, i would recommend unchecking the add to theatre option because it significantly extends the amount of time needed to complete the action and i found out the theatre is just like a video stream of your movies to be shared on icloud for easy access from your other devices (similar to the icloud photostream connected to iPhoto). It takes the time to make the video readily availabe in various sizes on the Mac server for easy access, which means it takes forever for your video to be exported to where you actually want it. This is not something we need and is not worth the wait time. (For example, last ime we left the theatre box checked, the progress status of the video was estimated to be completed in 351 minutes, and then 20 minutes later that somehow inclreased to 385 minutes, then duddenly it was done, so i think this add to theatre option also cause the progress status updates to go berzerk.)

Given the maximum RAM that model can use is 32GB, and the earlier release of that 27" mid-2013 iMac is nearly the same in most regards, you may note the listing of this slightly older iMac 27" is here in an Apple support document...
•iMac: How to remove or install memory:
http://support.apple.com/kb/HT1423
http://support.apple.com/kb/HT1423#1
The images of where the RAM chips are located, behind a metal plate, should be similar in your iMac and the mid-2013 iMac 27" shown in images on that page. Note there are several models discussed.
You could take the computer to a certified Apple service facility (retail store, or specialist reseller) and pay them to do this, and buy the RAM from them, and you will pay for this at a retail level. If they do it, you'd want to be assured the computer did all the things you sought to cure by upgrading RAM, correctly without fault. Like run tests and stuff.... Or there's no reason to not go ahead (after confirming from Apple) that you could buy quality RAM and do this job yourself, citing the Apple page link I'd posted above.
Contact Apple Support:
http://www.apple.com/support/contact/
You'd have to obtain the correct RAM (as indicated in my earlier post, citing MacTracker) of suitable quality for use in a Macintosh computer, and the recommendation for a DIY is to get the kit from 'Other World Computing' OWC online at their site. You can talk to knowledgable sales staff at OWC about what you have and what you need, and to help they may ask for the product serial number.
This is OWC and they have the spec RAM required for your iMac 27" model; double-check info:
http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Since yours is an Apple Refurbished model it will have a different number series. Unlike those in a retail store, because Apple does that to tell what ones they refurbished; refurbs I bought online were like that.
With questions during the first three months, you can get 'support' under the initial 90-day span of ownership of the new (and certified) Apple refurbs bought online; the other part of that is 'service' for 1 year. Call a nearest retail Apple Store, to set a genius appointment; or go online, and start the process of reporting your issue, while you still have some kind of warranty on the device. They can diagnose the issues you cite and tell you if you can upgrade the RAM (as you likely can) then you can buy and install the RAM yourself and probably pay less than 1/2 the retail rate, if you get some from OWC. A diagnosis is free if the Genius looks into it, but you'd need to set an appointment & lug the iMac to their store; protected from weather/shock.
If you want to extend the complementary service to three years (less the included 90-days) and add two years of AppleCare service, that is an affordable option of about $170. For a total of three years coverage.
{If you had a 21.5-inch iMac the RAM would require a service department visit where they use a different method to install the RAM upgrade. Those are built differently than the 27-inch iMac.}
There is a bit of detailed important information in the Apple link on how to upgrade the iMac RAM. There is a certain amount of RAM installed already and these chips would likely be removed if you get matching sets of new RAM to upgrade the capacity. And no matter what some say, there is a reason why they can be upgraded with more. Even with Mavericks OS X 10.9.x and its 'memory compression' etc, it would gladly accept all the RAM upgrade chips it could swallow. (Behind metal screen, mid-bottom iMac 27")
You may need to consider questions about applications that use system resources separate from those about whatever issues your iMac seems to exhibit. There may be some other cause of the video and iMovie symptoms, but more RAM won't hurt given the beast you bought can use 32GB and it has 8.
And if it seems too much to handle, you have 14 days from date of
purchase to take it back. Contact them ahead of then, if you do.
Hopefully this helps.
Good luck & happy computing!

Imovie stopped recognizing videos from my sony handycam

itunes and imovie suddenly is not recognizing or downloading from my sony handycam. I last used this feature in December. any clue how to fix this? Has their software changed. Videocam is only 3 years old.

What is the movie format?
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Copy the movie to your computer, Then you can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Con l'aggiornamento di imovie tutti i video sono mossi

Similar Messages

Maybe you are looking for