Concurent Manager: who is the application user, responsibility
Hi,
I want to create a conc. Manager, but i dont know which passwort + Application+ Application user+ Responsibilty must i give to be able to test the connection.
Do anyone know about the credentials.
Thanks
mandi
Hi Mandi
The view has an error below, it was updated internally (I'll get it refershed), you should use the APPS schema/user and its password. It is possible to setup other database users, but I think its a fairly complex process. The responsibility is one of the respective Apps responsibilities, for example the demo simply uses the priv SYSTEM_ADMINISTRATOR.
http://www.oracle.com/technology/products/warehouse/htdocs/concmgr/owbconcurrentmanager_viewlet_swf.html
Cheers
David
Similar Messages
-
How to assign single responsibity to all the applications user?
how to assign single responsibity to all the applications user?
Thanks in advanceUse FND_USER_PKG.AddResp
How to use FND_USER_PKG.AddResp
Re: How to use FND_USER_PKG.AddResp
single responsibility to all users
Re: single responsibility to all users -
Query to find the application user
Hi,
what is the query to find the application user in sql command?
I tried the below query
select app_user from dual;
app_user invalid identifierthanks.Use bind variable notation:
select :app_user from dualThis is a reduced example, right? Can't see any reason to run such a query instead of using one of the documented methods of referencing built-in substitution values.
Please try to use the documentation to answer such basic questions. -
SSRS How to grant BROWSE permission for reports for all the application users?
Hello,
Problem Statement
I need to allow all of my application users to browse the SSRS reports via logging onto the Report Manager and to some other I even want them to use Report Builder to modify & upload the report.
How could I achieve this.
Environment & Current implementation
We use SQL Server 2012 reporting services.
Custom authentication has been implemented using IAuthenticationExtension Interface. For more details, please refer
this msdn link.
Currently, for each new user created in the application, the admin has to manually give BROWSER role to the username to enable that newly created user to browse the reports.
Is there any way in which we can give "everyone" the BROWSE permission and get rid of this manual permission granting process?
Please feel free to ask for any additional information you need to help me on this issue.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay PugaliaHi vinaypugalia,
According to your description, you want to grant permissions for users to access report server in a batch, right?
In your scenario, you can use
script files( AddItemSecurity.rss and ConfigureSystemProperties.rss )with the Reporting Services SOAP API to assign permissions. It’s better that you add those users to a user group then run those script.
Similar thread for your reference:
SQL script to grant user permissions for SQL Server Reporting Services
Programmatically adding users to SSRS?
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Now that we have Java - who helps the end users?
Now that Oracle provides the JRE, we get to an interesting question: where do the non-technical people go for help with JRE installs and configurations?
At first blush, I'd almost feel we need a separate forum to help keep them in a 'friendly' place. We don't wanna be "Internet Help Desk" as depicted by "Three Dead Trolls in a Baggie" (http://www.deadtroll.com/) comedy group (http://www.youtube.com/watch?v=1LLTsSnGWMI)
Got one over in "Database - Install" (Re: java problem and I'm thinking this is going to be the tip of the iceberg. The info at http://www.java.com/en/download/help/index.xml will be useful
Edited by: Hans Forbrich on Apr 2, 2010 9:03 PMg.myers wrote:
Not sure whether you were referring to the software or the content there.
Looks like another Jive implementation, but I don't think anyone here wants to think about an OTN forums upgrade anytime soon.I had totally forgotten that Sun had their own forums - also using Jive - to handle Sun products. That is the one presented.
But the real issue that caused my question: Where do the end users go who want help on the Sun Java download that is required for so many applets?
And the answer seems to be the JRE forum at http://forums.sun.com/forum.jspa?forumID=32
Don't know where you are coming from with the 'upgrade to OTN' comment. I do not think anyone is suggesting an upgrade. My 'fantastic' was a response to the answer to my original question. My 'wow' was a response to the organization and the detail in that community. It's changed since the last time I looked, which was quite some time ago. -
Oracle 10g - Database does not respond to the application users
Hi all,
I am using ORACLE 10g database with 75 users connections 50 local and 20 remote users using ADSL and dial up modem. Operating system on server is
Windows 2003.
All of a sudden users making the entry get disconnected getting the error as
ORA-12516: TNS:listener could not find available handler with matching protocol stack
Other case users when using the appliaction get their PC hanged and connection
to oracle fails again. they cannot login to the application that time, the error is
ORA-04031: unable to allocate %s bytes of shared memory ("%s","%s","%s","%s")
Twice a day the users trying to login cannot access the database server.
Front end application is in VB using exe file. When the users cannot logon
to the database. I manually stop the ORACLE services(including DB console) and
then stop the listener.
This practice is going on since last two months.
Server Scenario
After Installing Oracle Standard Edition 10g.
System tablespace utilization is 98.5% which is 465 MB out of total 470 MB.
There is only one Rollback Segment named as SYSTEM.
when we install 9i 4 rollback segments as RO1, RO2, RO3, RO4 are created
by default.
Do I need to add the datafile to SYSTEM table space as its current usage is 99.15% and its auto extend is ticked on using auto extent as 10 MB. I tried adding another datafile during weekend downtime. when I resumed on saturday morning I found it did not add any datafile which I had put on thursday eveninig as system02.dbf.
Do I need to add a new datafile to the SYSTEM tablespace ?
Do I need to create new rollback segments apart from SYSTEM rollback segment ?
My current schema size 15360Mb with its usage as 9.32% (1432.25 Mb).
Please reply !!!Hi Paul
My Server configuration is
Compaq ML 370
3.4 Ghz Processor
3.5 GB RAM
SQL> show sga
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> select * from v$sgastat;
POOL NAME BYTES
fixed_sga 787988
buffer_cache 25165824
log_buffer 524288
shared pool subheap 55600
shared pool KQR L SO 218160
shared pool KQR M PO 1329244
shared pool KQR M SO 605364
shared pool KQR S PO 164156
shared pool KQR S SO 6144
shared pool KTI-UNDO 1235304
shared pool sql area 5368208
shared pool KGLS heap 1597560
shared pool joxs heap 6004
shared pool row cache 3707272
shared pool parameters 17520
shared pool repository 19396
shared pool ASH buffers 4194304
shared pool free memory 16586072
shared pool PL/SQL DIANA 679456
shared pool KSPD key heap 4220
shared pool PL/SQL MPCODE 1167992
shared pool library cache 11368964
shared pool miscellaneous 25942980
shared pool pl/sql source 88
shared pool PLS non-lib hp 29816
shared pool XDB Schema Cac 3594144
shared pool alert threshol 3460
shared pool joxlod exec hp 355820
shared pool table definiti 5880
shared pool temporary tabl 4932
shared pool trigger defini 12848
shared pool trigger inform 1892
shared pool type object de 20256
shared pool private strands 1198080
shared pool event statistics per sess 4384640
shared pool fixed allocation callback 304
large pool free memory 8388608
java pool joxs heap 233856
java pool free memory 44743296
java pool joxlod exec hp 5354496
40 rows selected.
SQL> select segment_name, owner, status
2 from dba_rollback_segs;
SEGMENT_NAME OWNER STATUS
SYSTEM SYS ONLINE
_SYSSMU1$ PUBLIC ONLINE
_SYSSMU2$ PUBLIC ONLINE
_SYSSMU3$ PUBLIC ONLINE
_SYSSMU4$ PUBLIC ONLINE
_SYSSMU5$ PUBLIC ONLINE
_SYSSMU6$ PUBLIC ONLINE
_SYSSMU7$ PUBLIC ONLINE
_SYSSMU8$ PUBLIC ONLINE
_SYSSMU9$ PUBLIC ONLINE
_SYSSMU10$ PUBLIC ONLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU11$ PUBLIC ONLINE
_SYSSMU12$ PUBLIC ONLINE
_SYSSMU13$ PUBLIC ONLINE
_SYSSMU14$ PUBLIC ONLINE
_SYSSMU15$ PUBLIC OFFLINE
_SYSSMU16$ PUBLIC OFFLINE
_SYSSMU17$ PUBLIC OFFLINE
_SYSSMU18$ PUBLIC OFFLINE
_SYSSMU19$ PUBLIC OFFLINE
_SYSSMU20$ PUBLIC OFFLINE
_SYSSMU21$ PUBLIC OFFLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU22$ PUBLIC OFFLINE
_SYSSMU23$ PUBLIC OFFLINE
_SYSSMU24$ PUBLIC OFFLINE
_SYSSMU25$ PUBLIC OFFLINE
_SYSSMU26$ PUBLIC OFFLINE
27 rows selected.
Currently AUTOEXTEND is ticked as on for SYSTEM tablespace and its size is showing as 99.16% (466.06 mb) used which is very much nearing to its full capacity of 470 mb.
Currently 75 users - 50 Local users and 20 Remote Users are connected to the server. Is there any limit that Server should have limited connections.
Server has Windows 2003 Standard Edition. Has Windows 2003 anything to do
with the no. of users getting connected ? -
Developer role to the application user
Hi All,
We have developed an application, for which we are storing users with different roles in database table.
What I am trying to achieve:
If the user with admin role logs into our application, the Apex developer toolbar should get visible to him/her for editing the page. (In other words, Our Application Admin user should be treated as Apex developer).
Can someone explain how can this be achieved?
Thanks,
Pooja
Note: Our application is Oracle SSO protected.
Application Express 3.1.1.00.09
Database : 11gPooja - The developer toolbar will appear only if a developer has already authenticated to the apex development environment in the same browser process in which the application is being accessed and then only if the authenticated username in the application matches that used to access the apex development environment and then only if the application being accessed belongs to the same workspace as the workspace to which the developer authenticated.
So there is no way to do what you described.
Scott -
Is there any way changing the priviledge after starting the managed server with the other user
Hi,
is there any way to change the user privilege after i have started the managed
server with one user.....say for example ....i have started one of my Managed
server as "root" ...but after that i wanted to make this instance work under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangitaThanks again Rob.
Rob Woollen <[email protected]> wrote:
>
>
sangita wrote:
Thanks Rob for been so quick in responding.
I have 3 questions for you:
Running a server under root is a huge security hole.My Question: 1) what are the probable security issues while runninga server under
root ?
are these security issues external(from outside world) or internal(internally
within a company) ?
Iam basically curious to know external threats.
The problem is the root user can do anything. So if someone finds a
security hole in your server, then they have complete control of your
system.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.My Question: 2) What is the harm in using port 80 for webserver andwhy do the
people wanted to bind to a port < 1024 ?
People normally use 80 for web servers because that's the well-known
port.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.My Question: 3) Suppose iam having a cluster of 2 Managed servers runningon port
7070. And Iam having a Iplanet server working as a Webserver that basicallyproxies
requests to this cluster. Then what is the best approach that i shouldfollow
in this context.....to be honest with you ....i still couldnot understandwhat
does "binding" the webserver port to a managed server in weblogic mean.
I would have your firewall redirect 80 to whatever port Iplanet is
listening on and then have iplanet proxy to WLS.
Do not run your WLS servers as root.
-- Rob
Iam sorry for asking these "silly" questions(in your opinion) ...butiam a bit
confused.
thanks, sangita
Rob Woollen <[email protected]> wrote:
Running a server under root is a huge security hole.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.
There is a set uid option in WLS where you start the server as root
and
then after it binds to the low port, it will switch to another userthat
you specify.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.
-- Rob
sangita wrote:
<Sure, it's possible to do this, >
how to do this?
<but why do you want to do it? >
Iam not sure why this group (the other group than me) does start theirserver
as "root"...but somebody from that group asked me about this today.
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.then what is the best approach and what are the pros and cons if westart the
server as "root" OR as different user ????
please advise ....
thanks again.
Rob Woollen <[email protected]> wrote:
Sure, it's possible to do this, but why do you want to do it?
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.
-- Rob
sangita wrote:
Hi,
is there any way to change the user privilege after i have startedthe managed
server with one user.....say for example ....i have started one
of
my Managed
server as "root" ...but after that i wanted to make this instance
work
under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangita -
Who are the last users who altered data in a table
Hi,
i'm managing this release of database:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
my experiece is a little more than a normal user and plsql developer, but with the responsability to manage 6 databases in my and client's offices.
since we are experiencing many problems of continuous data variations on my databases, i need to know what happens.
as a first thing i am imagining i need to know who accesses to what tables, when, with what update etc etc.
maybe it could be interesting lock some tables for some users during some hours of the working day.
I'm sorry for my english, i hope u all will understand what i'm trying to explain, if anybody could help me with documentation and explainations i will be happy :)
Thanks,
MassimoYou need to enable auditing. Use fine grained auditing.
http://www.oracle-base.com/articles/10g/Auditing_10gR2.php
Regards
Asif Kabir -
I have a Dell Inspiron 530 desktop running Windows Vista Home edition. Firefox was working properly just as it has for years. All of a sudden when you click on the icon, nothing appears. I open task manager, no applications show. I go to processes, there is firefox32. I kill the process and start over...endless loop. I shut the computer down and restarted. Same issue. I uninstalled firefox and reinstalled, same issue. I idon't know what else to try.
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How to say Thank You! to all the people who help the surface users like me
I am often searching for quick answers on how to use features on my Apple gadgets, and usually find a quck, concise answers that would take me a long time to find on my own. I am very much a surface user of technology, like most people are about cars, but love all I can do on these marvelous transporters to knowledge, places, people, etc. Thak you to all you Aplle Wizards who make my life so much easier.
You are entirely welcome. Part of the reason we do this - answering questions from other users - is because of the gratitude shown by the people we help. Any way I can make someone else's day brighter is always a plus.
Each day better than the last.
Good luck to you. -
iPad generation 2 has been factory reset, removed from managed devices, apple support, and the device still continues to say it's locked by my ID and cannot be unlocked and registered to a new ID.
HELP!Even if you are sure you have done all of this, do it again slowly and in the order given:
Prepare your device to sell or give away
If there is still a problem, post back with the exact complete wording of the error message
received. -
How to popup a msg from Oracle to all appl users logged in the Application
Hi All,
We are using Forms/Reports6i and database oracle9i
Does Oracle provide any message broadcast method to send messages to the Application users which are currently using the application.
If not then how it will be performed.
Suppose we have to send some server maintenance messages to all users so only all application users who are logged in to application must get these messages.No other users.....
For Example: 1 Server and 200 Application Users logged in..I want to send any message in oracle to all of them after they are logged in the application.
Advance Thanksno - you have to wait till the next forms release. there you can do it
in between you have to work with timers, which query in the db, if there are new message for the user. build a news-table where you look into. Or build an AQ and write get-functions in db-packages, which you use in forms 6i for reading in the AQ.
but don't use (if possible) this timers in the web, because your performance will have problems then -
Strange behavior during authentification to the application
hello everybody, I place you in the context. I made a web application for the billing department, which is in final phase of the project, to complete it I must resolve the problem of authentication. This application is deployed on tomcat 5.5.23 on Windows XP.
When I access the application, it authenticates me in a transparent way with JCIFS ntlm authentication on the Windows 2003 domain and posts the page without problem. The bug is when a second user wants to access the application, the logon box appears, then nobody cannot be authenticated except the first user who accessed the application. You see the problematic of my web application.
With a simplistic application to solve the problem, I noticed that during the authentification, an application is �monopolized� by the user. example: The user A can access the app1. The user B can access the app2. The user A can't access the app2 and vice versa.I think that the problem is in the file Web.xml but I don't know what to configure to solve the problem.
To finish, the technical part is here, and thanks for your assistance, that will be really appreciated.of authentication.
web.xml
<filter>
<filter-name>NtlmHttpFilter</filter-name>
<filter-class>jcifs.http.NtlmHttpFilter</filter-class>
<init-param>
<param-name>jcifs.http.domainController</param-name>
<param-value>adserver.mycompany.com</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>NtlmHttpFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>Did you try & see if this may help?
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
•Apple Portables: Troubleshooting MagSafe adapters - Apple Support
That should. If not, a diagnostic test may be necessary to see what else may be involved.
An Apple Store with Genius or specialist on staff may be of help for testing, also. If not
see an Apple authorized service provider, an independent authorized/trained agent. These
would be able to perform several levels of testing, troubleshooting, and provide estimate.
Good luck & happy computing! -
Oracle Security - Controlling the 'alter user' privilege
Hi,
1. DB 10.1.0.5 and 10.2.0.3
2. "Admin User" needs to be able to change some users passwords in database.
3. Create user adminuser - grant alter user to adminuser.
4. DBAs will grant "approle" role to list of required users. DBAs will maintain control of who gets this role.
4. Create system trigger on alter database - will prevent "adminuser" from changing passwords for accounts not authorized - Script does not fire for DBAs and anyone changing their own password.
The trigger works as intended - the "adminuser" account can only change the specific set of users.
Question: We've discovered that the "adminuser" can also use the "alter user" privilege to change default tablespace and tablespace quota. User should only be able to change password.
Anyone have ideas on adding to the trigger to make sure the "adminuser" is only altering the password?
I am playing with the ora_is_alter_column system event, thinking that maybe the password column in user$ would be changed but so far I can't get this to work: Here is my trigger --
CREATE OR REPLACE TRIGGER SYS.PASSWORD_CONTROL AFTER ALTER ON DATABASE
DECLARE
DBACHK varchar2(50);
USRCHK varchar2(50);
BEGIN
BEGIN
-- Ensure users can change their own passwords --
IF
ora_login_user = ora_dict_obj_name
THEN
RETURN;
ELSE
-- Do not apply trigger to DBA group --
select grantee into DBACHK from dba_role_privs where granted_role='DBA'
and grantee = ora_login_user;
IF
DBACHK = ora_login_user
THEN
RETURN;
END IF;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
BEGIN
select grantee into USRCHK from dba_role_privs where
granted_role='DISCUSR' and grantee = ora_dict_obj_name;
IF
ora_dict_obj_type = 'USER'
and ora_dict_obj_name = USRCHK
---- Need to check that only the password is being change -- the line below does not work
and ora_is_alter_column('PASSWORD') = TRUE
THEN
RETURN;
ELSE
RAISE_APPLICATION_ERROR(-20003,
'You are not allowed to alter user.');
END IF;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
RAISE_APPLICATION_ERROR(-20003,
'You are not allowed to alter user.');
END;
END;user602453 wrote:
Ed, thank you for your reply. But, let me explain in more detail.
More detail is always helpful. ;-)
>
A specific user has been assigned as the application administrator. This admininstrator is responsible for reseting application user passwords. The DBA (me) recognizes the DB security issues so I am trying to craft a solution that will allow the application administrator the ability to change only the password of the application users.
I see that this may be out your hands, but I'd still question the wisdom of having an apps administrator being the one to change user passwords. Especially if that were a model where the users couldn't change their own passwords. I might accept it if the app admin were acting more of a helper to a clueless user.
Since the only way to change user passwords is to grant the 'alter user' privilege I need a system trigger to keep the user from changing non-application user passwords. Also, because I support nearly 100 production databases that support about 35 different applications I need a solution that can apply to multiple databases. I've been assured that there will only be one administrator charged with resetting passwords.
So,
Given those requirements, I have this trigger that will allow the the specific administrator to change the password of a specific set of user while not impacting DBAs or people wanting to change their own password. The way I've implemented this is to create a "dummy" role and assigning the role to the application user. The trigger will allow the administrator to change the password only if the user has the role assigned. The role has no privileges, it is just a way to "mark" the user as an application user. The administrator cannot grant this "dummy" role, only the DBA can.
Hope that clears things up.I still see another problem in that it still comes back to the dba to create the apps user in the first place, and to assign that dummy role to the user. Also, I'd hope that this proposed apps admin user is a role assigned to a real user. If not, as I mentioned before, you have no real accountability to who is using that account. Simply saying "it shall not be shared", even if written in corporate policy, won't secure it, and you won't be able to trace it. Well, you could turn on auditing and capture the OS userid in the audit log.
Maybe you are looking for
-
F.01 - Trial balance for multiple company codes
Hello SAP gurus, I am trying to use transaction F.01 to generate trial balance for multiple company codes. My ideal output is as follow: Company Code GL account Amount AAAA 10000 200,000 AAAA 1000
-
How do I attach a PDF to an external e-mail?
-
I Have a problem when am connecting my I phone to Mac. All my song are geting erase from my music player <Edited by Host>
-
Anyone had any luck running garage band 1 or 2 on a B@W G3. I have a B&W G3 350 with 120GB 7200rpm HD and 728mb RAM - will that be enough?
-
Open Here Maps from the Calendar
Lumia 1020 Hi I am searching for a way to go in to my calender and from there open the Navigaion app so that I am shown a way to navigate to the address of my next appointment. Kind regards, pemopemo