Concurrent employment - Error Message

Hi
I am getting an error message " Employer Space is not permitted in CE environment", while doing an hiring action,..
I have set the Generation rule as 1 - ( Central Person object )
How do i rectify this??
Thanks in Advance

Hi Uma,
If the same error persists still, then the grouping value might not have been filled due to some inconsistency in the configuration of the org structure.
The employer for whom you are hiring an employee should have some unique identification mumber.
this unique identification number is country specific.
I work for the US country here and you identify an employer by tax
identification number in US
In case you are hiring a employee for the US country you can check V_t5u0p and check your personnal area and subarea,has employer ID been maintained.
In case this is left blank, CE encironment throws up the error.In non ce environment you wont face this issue.
This is a  hunch which i feel can be the reason for the error.
If yu can have look at the long text of the error message, that too also conveys the same meaning.
Please let me know about the country u r working on.
I would be happy if you could look into whatever i have mentioned and reply me back with the results.
and in V_T582ITVCLAS--0000, 0001 should be maintained as 'not permitted'.
Thanks,
Jose

Similar Messages

  • Crystal Reports Concurrent Users Error

    We are getting a "Too Many Concurrent Users" error message when our users are trying to run a Crystal Report.  This can happen even when we have only 2 persons on the system.  Is there a way that we can check how many concurrent users there are and who they are ?
    We have to keep restarting the Report Server and sometimes the person responsible is not available......
    Could it be that the Users are not closing the Report window correctly or something like that ?
    Has anybody out there experienced this problem ??
    Ron Smith

    Hello,
    Uou can check concurrent license usage by going to the Servers section of the CMC and clicking on the Central Management Server.
    The most common cause for this is that users do not log off correctly. i.e they close the browser window instead of logging off. The problem is that there is no foolproof method to determine a browser close (in IE 7+). As a result, the session remains active even though the user has closed the session.
    What application server do you use? Is it Apache/Tomcat/other Java application server or IIS/.NET?
    The following thread may help:
    [Infoview - not logging off when browser is closed;
    Thanks.
    Srinivas

  • Concurrent Program ends in Error without any error message - Apps 11.0.3

    Hi,
    We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
    thanks
    Ram

    Ram,
    Is this a custom or standard concurrent program?
    Was this working properly before? If yes, what changes have been done recently?
    Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
    Regards,
    Hussein

  • I get an error messaging when trying to re sync  iPad and outlook 2010.  Error concurrent upload

    Initial wireless sync was successful.  Attempts to re sync got unexpected error message error:0x80040604:  concurrent upload detected (CTag Error).   I've sent in report.  Andy suggestions?

    Read this
    http://support.apple.com/kb/ts1583

  • Error in SM35 for RP50G-CCNTR in concurrent employment payroll (infotype 0, 1)

    Hi Experts,
    I need to perform mass update through BDC session. But employee has multiple assignments (more pernr numbers). From PA40 selection, only Person ID is input field, the assignment field is only selectable. In BDC, I add one item that moving pernr into assignment field (RP50G-CCNTR)
    when I run session in background get into the error that “RP50G-CCNTR” is not the input field..
    But when I try for foreground or display with error it is working fine without any problem.
    Please advise how do I do the mass update for concurrent employment case in background.
    Any help would be much appreciated.
    Thanks
    Balram Adep

    Hi Amit,
               Thaks for reply. Amit, I am new to ABAP-HR so i dont know how to use FM "HR_MAINTAIN_MASTERDATA".
    Can u please explain in detail.
    Thanks
    Ziad

  • Prerequisities for Concurrent Employment.

    T77S0 Switch     Value
    CCURE MAINS – Concurrent Employment Main Switch     X
    CCURE PAUIX - CE Master Data User Interface Enhancements     X
    CCURE PIDGN - Generation Rule PERSONID     2
    Hi..
    I activated all necessary integrations for concurrent Employment @T77S0,
    While i am performing action for International Assignments i am getting error msg:
    <b>"This assignment is not a planned global assignement on 1.1.2007"</b>
    Can any one help me out in this regard.
    Kanuku.

    Hi Swapnil,
    I'm currently researching what minimum number of switches need to be set to activate external person id. We do not have concurrently employed employees, but have employees changing countries which result in multiple pernrs for a single employee.  I do understand that the central person object "CP" in OM can be used. But, we are exploring the possibility of using external person id to tie all these pernrs as another alternative.
    I tried activating the following switches for concurrent employment
    CCURE MAINS = 'X'
    CCURE PAUIX = X
    CCURE     PIDGN = 2
    CCURE     PIDSL = X
    When a new employee is hired the system should generate external person id in IT 0709. But this infotype is not created. I also tried running the program HR_CE_GENERATE_PERSONID_EXT for a single employee. But I get an error message stating that the person id switch is not activated. I also tried manually creating this infotype in PA30. But the system generates an error message that  IT 0709 is not available in the system. Do we need to perform any other technical conversions or structure generations in order to use concurrent employment functionality. We are currently on 4.7

  • Error message for a JSP-BC4 Application

    Hi,
    I have created a simple BC4J-JSP application using the wizards in Jdeveloper. I used the emp-dept table from scott.
    Then I created a .ear file and uploaded that to an OC4J instance using ias 902 enterprise manager. The main.html comes normally. But when I am trying to click on the left hand navigator the following error message is coming:
    Error Message: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file /JSP_BC4J_TEST1/common/bc4j.xcfg in the classpath
    Error Message: JBO-33001: Cannot find the configuration file /JSP_BC4J_TEST1/common/bc4j.xcfg in the classpath
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file /JSP_BC4J_TEST1/common/bc4j.xcfg in the classpath
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:372)
         at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:169)
         at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:554)
         at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:143)
         at DeptView_Browse._jspService(_DeptView__Browse.java:58)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:535)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:281)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:766)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:802)
         at java.lang.Thread.run(Thread.java:484)
    ## Detail 0 ##
    oracle.jbo.JboException: JBO-33001: Cannot find the configuration file /JSP_BC4J_TEST1/common/bc4j.xcfg in the classpath
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:237)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:192)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:348)
         at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:169)
         at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:554)
         at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:143)
         at DeptView_Browse._jspService(_DeptView__Browse.java:58)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:535)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:281)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:766)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:802)
         at java.lang.Thread.run(Thread.java:484)
    Thanks,
    Ritendra.

    I think too, that is a time machine problem.
    I have 4 volume partions (3 hard disk) at this mac. I use only the time machine as backup system. Only one. Before I install Snow Leopard I use the latest MacOS X 10.5.8. Always the newest version of MacOS.
    Perhaps I describe it: Under 10.5.8 I use the time machine backup volume at an external firewire drive, always the same. I switch off this firewire drive often. In this case (the drive isn`t connect) the icon of this partition"Pro10.4" was changed to the time machine volume icon, but the time machine does nothing at this partition.
    After the installation of 10.6 I cannot access to this "Pro10.4" volume. I get the same error message if I want to open the external drive volume of my time machine backup. There is no problems with my other two partition. Of course my old V10.5.8 is at one of this partition. If I start my mac from a other partition (time machine is off), I have no problem with all partitions.
    I change the name of "Pro10.4", but nothing is changing. The time machine protect the backup volume under V10.6. Unfortunately it choose an other partition, if it don`t find my external drive. How can I reset this state of my "Pro10.4"?
    Thanks
    Uwe

  • Error messages when installing/starting oc4j (11.1.1.0.0) Technical Preview

    Hello,
    Could someone please assist me with the following error messages?
    08/08/12 10:25:30 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
    08/08/12 10:25:30 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
    08/08/12 10:25:32 Don't know how to map non-serializable type: interface javax.management.j2ee.statistics.Stats to Open MBean Type.
    08/08/12 10:25:34 WARNING: J2EE JNDI-00002
    08/08/12 10:25:34 WARNING: No javax.jms.ConnectionFactory found at null
    08/08/12 10:25:38 Oracle Containers for J2EE 11g (11.1.1.0.0) initialized.
    Obviously oc4j is installing, but these error messages are certainly a problem (for example, I can't successfully deploy applications).
    When I used the previous version of oc4j none of these errors surfaced. I also have tried installing this new version in a new, clean directory, and still get the same error messages.
    Please help,
    John

    Thank you for your quick response.
    I hope that you are right, that these errors don't cause any other problems down the line, but I still have a problem trying to deploy applications.
    For example, I tried to deploy mapviewer, using the following syntax --
    java -jar admin_client.jar deployer:oc4j:localhost fmwadmin <admin_pwd>
    -deploy
    -file <path-to-ear-file>
    -deploymentName <name>
    -bindAllWebApps
    -- and recieved the following errors, which I didn't get before when I was using the previous version of oc4j (Oracle Containers for J2EE 10g [10.1.3.1]):
    08/08/13 08:49:30 WARNING: web: Servlet error
    java.lang.ClassCastException: com.sun.faces.application.ApplicationAssociate
    at com.sun.faces.application.ApplicationAssociate.getInstance(ApplicationAssociate.java:180)
    at com.sun.faces.application.WebappLifecycleListener.getAssociate(WebappLifecycleListener.java:289)
    at com.sun.faces.application.WebappLifecycleListener.handleAttributeEvent(WebappLifecycleListener.java:225)
    at com.sun.faces.application.WebappLifecycleListener.requestDestroyed(WebappLifecycleListener.java:78)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:743)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
    at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
    at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:237)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:877)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
    at java.lang.Thread.run(Thread.java:595)
    Do you have any idea why I may be getting these error messages?
    Thank you for your time and assistance!
    John

  • All headphones give distorted, crackly sound. Sometimes no sound. Headphone jack broken? Apple expresslane support giving a "generic error" message whenever I try to send in for service...

    As in the title. For a while the headphone jack is occasionally crackly when the jack moves around in the port. It finally died today when I plugged it in and all the audio is heavily distorted and sometimes cuts out completely. Whenever I try to set up a service with Apple I keep getting this error message:
    We're sorry, but we are unable to complete your request at this time.
    Please try again in a few minutes or start over now.
    I can't get through to the Irish support phone number either, it keeps saying number not recognised. Is there any other way I can send my iphone in for service (closest genius bar is 500km away...)

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Newbie, Help! iTunes won't play or import random files - no error message

    Have a large library of MP3 files created with Real Audio. All played well in Real Audio or Windows Player. I did a complete unintall of Real Audio, installed ITunes, and while it accepts some of the songs(files), it doesn't accept others. It seems utterly random. There are no differences between the files. All are legit. I do not get an error message, but NOTHING happens no matter what method I employ to play or import the song/file. Have compared file attributes via properties and there is no difference. Itunes is the default player, and I have not reinstalled Real Audio. I just listen to the songs on computer while working, but thought I would try Itunes and get an IPod. Not off to a very good start.

    I suppose Real Audio was used, though for sometime I used Iomega to store them on zip disks. It has been a long time. For the CD's that I have on hand, I have been doing what you suggested. This is not easy, as the old files were just all together in one file, and while I thought I had changed settings so that iTunes would do the same (after learning that iTunes puts things in lots of different folders - especially confusing for me with soundtracks with different artists)the last one I did was put in folders entitled unknown/unknown with only track numbers. And if I change anything using explorer, I have to find each file for iTunes again. I'm still struggling, not understanding how these mp3 files are different in some way. Some are from the same CD's. At any rate, now that I am (found your term) ripping these CD's again, is there a way to avoid all the folders and layers of folders? Thank you for your patience. Obviously when my daughters were here to help, me being green was not a problem@

  • Cannot backup iPhone 3GS. Error Message: iTunes could not backup iPhone because iPhone Disconnected. What is the fix for this problem?

    Hi, I'm hoping someone can help me find a solution to my problem.
    When a backup is attempted, it starts off as if it's working, then stops and the following error message appears: "iTunes could not backup iPhone because the iPhone disconnected". But, the iPhone doesn't really disconnect! It must be some type of internal glitch.
    The iPhone is a 3GS and I have mostly pictures and contacts, two songs, a total of 33 apps. The iOS is updated (6.1.6). I do not know if this phone was ever jailbroke. I have been able to backup this phone before, but cannot now. The last backup was 9/21/13, it is now 3/2/14.
    Sorry if there is too much info, or not the correct info to find a solution!
    Also, I must say that although I am not a tekkie, I've seen many different types of various programs and I find that iTunes is not very intuitive...don't mean to hurt anyone's feelings, just my humble opinion.
    Thank You,
    Camp917

    Hey Lawrence,
    A big THANK YOU!! to you! Your suggestions worked!
    Before I changed USB ports (more on that in a sec...), I employed one of your suggestions that you gave to someone else with the same problem...and that was to clean the connector on the bottom of the phone with a soft dry tooth brush. I couldn't believe the amount of lint that came out! Especially what was found in either end...had to do some very careful picking. (Almost enough lint to knit a small sweater!!)
    Changing the USB port was the second and final step required for a successful backup. My computer is a laptop, and I did have a USB Bluetooth adapter (for another device) installed. I removed  the adapter, plugged the iPhone into that USB port, crossed my fingers...and it worked!!!
    Now if I can figure out the rest of this darn program, I might upgrade to a new iPhone!
    Again, thank you very much Lawrence!
    Rich

  • Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

    We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
    2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license.  Please contact the server administrator. whilst logging into the server. 
    We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon. 
    I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured.  I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
    resumed to stop, here I assume its where the licensing part comes in to re-enabled this. 
    I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install  the overview part that I cannot get into,
    because I think we have to be is AD DS for this which we don't.  Is there a way around this for non domain / just standalone set-up?  Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work? 
    Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard?  We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
    to reinstall other programs.  I have installed  Server role service of Remote Desktop Licencing and automatically installed other associated services needed.  in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
    where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
    10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.  
    I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there.  I haven't restart the services of Remote Gateway / the server itself; do I really
    need to reboot server?  
    Any advice / guidance would be very much appreciated and this is a urgent matter.  
    Thank you for your time.

    Hotfix Released here:
    http://support.microsoft.com/kb/2916846

  • LOTUS NOTES Reconciliation error message

    I am using OIM 11gR2 with connector server java installed on 32 bit windows 2003 server. While performing reconciliation i am getting the following error message includes both OIM side error messages and connector server side error message. Can any one help me out to over come this issue ASAP.
    OIM side error message:
    [2012-09-04T08:10:23.508-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] Kernel executing default validation with process id, event id, entity and operation 5,045.0.JobDetails.SCHEDULE NOW
    [2012-09-04T08:10:23.519-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.scheduler.impl.quartz] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] Execute default action handler with 5045.15771.JobDetails.SCHEDULE NOW.entityId=null
    [2012-09-04T08:10:23.541-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.dao] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] Inserting records for orchestration cleanup
    [2012-09-04T08:10:23.552-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] Completed orchestration with action result - Done
    [2012-09-04T08:10:23.570-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.scheduler.impl.quartz] [tid: OIMQuartzScheduler_Worker-1] [userId: oiminternal] [ecid: 0000JaGajgHDOd8pVg_Aic1GHS_g000003,1:16405] [APP: oim#11.1.2.0.0] Job Listener, Job to be executed Description null FullName DEFAULT.Domino Connector User Reconciliation Name Domino Connector User Reconciliation
    [2012-09-04T08:10:23.645-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.scheduler.impl.quartz] [tid: OIMQuartzScheduler_Worker-1] [userId: oiminternal] [ecid: 0000JaGajgHDOd8pVg_Aic1GHS_g000003,1:16405] [APP: oim#11.1.2.0.0] Method details Method details: executeJob
    [2012-09-04T08:10:23.645-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-1] [userId: oiminternal] [ecid: 0000JaGajgHDOd8pVg_Aic1GHS_g000003,1:16405] [APP: oim#11.1.2.0.0] Method details executeJob Domino Connector User Reconciliation
    [2012-09-04T08:10:24.392-05:00] [oim_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] ADP ClassLoader failed to load: Script1
    [2012-09-04T08:10:24.393-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.features.scheduler.agentry.operations] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: fe4e49376a8b4763:-2d65a256:139909ad0fc:-8000-0000000000001b2e,0] [APP: oim#11.1.2.0.0] ADP ClassLoader failed to load: Script1[[
    java.lang.ClassNotFoundException: ADP ClassLoader failed to load: Script1
    at com.thortech.xl.dataobj.tcADPClassLoader.findClass(tcADPClassLoader.java:229)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:247)
    at oracle.iam.scheduler.vo.ClassLoaderObjectInputStream.resolveClass(ClassLoaderObjectInputStream.java:72)
    at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1574)
    at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1495)
    at java.io.ObjectInputStream.readClass(ObjectInputStream.java:1461)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1311)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1946)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1870)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1752)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1946)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1870)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1752)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
    at oracle.iam.scheduler.vo.JobHistory.getExceptionObject(JobHistory.java:78)
    at oracle.iam.features.scheduler.agentry.operations.LookupActor.prepare(LookupActor.java:1282)
    at oracle.iam.features.scheduler.agentry.operations.LookupActor.refresh(LookupActor.java:3074)
    at oracle.iam.features.scheduler.agentry.operations.LookupActor.receiveEvent(LookupActor.java:2793)
    at oracle.iam.consoles.faces.mvc.canonic.Model.handleIntent(Model.java:975)
    at oracle.iam.consoles.faces.mvc.canonic.Controller.doHandleIntent(Controller.java:533)
    at oracle.iam.consoles.faces.mvc.canonic.Controller.doSelectAction(Controller.java:204)
    at oracle.iam.consoles.faces.event.NavigationListener.processAction(NavigationListener.java:99)
    at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:675)
    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
    at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
    at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:889)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:379)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:107)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    [2012-09-04T08:10:31.907-05:00] [oim_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-1] [userId: oiminternal] [ecid: 0000JaGajgHDOd8pVg_Aic1GHS_g000003,1:16405] [APP: oim#11.1.2.0.0] IAM-1020021 Unable to execute job : Domino Connector User Reconciliation with Job History Id:28449[[
    java.lang.RuntimeException
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$15.createException(CommonObjectHandlers.java:283)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$15.createException(CommonObjectHandlers.java:282)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$ThrowableHandler.deserialize(CommonObjectHandlers.java:115)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObjectField(BinaryObjectDecoder.java:417)
    at org.identityconnectors.framework.impl.serializer.MessageHandlers$5.deserialize(MessageHandlers.java:155)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.api.remote.RemoteFrameworkConnection.readObject(RemoteFrameworkConnection.java:153)
    at org.identityconnectors.framework.impl.api.remote.RemoteOperationInvocationHandler.handleStreamResponse(RemoteOperationInvocationHandler.java:119)
    at org.identityconnectors.framework.impl.api.remote.RemoteOperationInvocationHandler.invoke(RemoteOperationInvocationHandler.java:97)
    at $Proxy1085.search(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.identityconnectors.framework.impl.api.BufferedResultsProxy$BufferedResultsHandler.run(BufferedResultsProxy.java:162)
    [2012-09-04T08:10:31.923-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.scheduler.impl.quartz] [tid: OIMQuartzScheduler_Worker-1] [userId: oiminternal] [ecid: 0000JaGajgHDOd8pVg_Aic1GHS_g000003,1:16405] [APP: oim#11.1.2.0.0] Job Listener, Job was executed QuartzJobListener.jobWasExecuted Description null FullName DEFAULT.Domino Connector User Reconciliation Name Domino Connector User Reconciliation
    connector server side error message:
    Sep 04, 2012 8:12:33 AM org.identityconnectors.framework.server.impl.CCLWatchThr
    ead checkCCL
    INFO: Creating thread 'pool-1-thread-3' with a non-null CCL
    Sep 04, 2012 8:12:40 AM org.identityconnectors.framework.server.impl.ConnectionL
    istener processOperationRequest
    SEVERE: null
    java.lang.NullPointerException
    at org.identityconnectors.domino.Query.executeQuery(Query.java:160)
    at org.identityconnectors.domino.DominoConnector.executeQuery(DominoConn
    ector.java:248)
    at org.identityconnectors.domino.DominoConnector.executeQuery(DominoConn
    ector.java:75)
    at org.identityconnectors.framework.impl.api.local.operations.SearchImpl
    .rawSearch(SearchImpl.java:105)
    at org.identityconnectors.framework.impl.api.local.operations.SearchImpl
    .search(SearchImpl.java:82)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.identityconnectors.framework.impl.api.local.operations.ConnectorA
    PIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:93)
    at $Proxy5.search(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.identityconnectors.framework.impl.api.local.operations.ThreadClas
    sLoaderManagerProxy.invoke(ThreadClassLoaderManagerProxy.java:107)
    at $Proxy5.search(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.identityconnectors.framework.impl.api.DelegatingTimeoutProxy.invo
    ke(DelegatingTimeoutProxy.java:107)
    at $Proxy5.search(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.identityconnectors.framework.impl.api.LoggingProxy.invoke(Logging
    Proxy.java:76)
    at $Proxy5.search(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at org.identityconnectors.framework.server.impl.ConnectionProcessor.proc
    essOperationRequest(ConnectionProcessor.java:287)
    at org.identityconnectors.framework.server.impl.ConnectionProcessor.proc
    essRequest(ConnectionProcessor.java:191)
    at org.identityconnectors.framework.server.impl.ConnectionProcessor.run(
    ConnectionProcessor.java:121)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.
    java:1110)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:603)
    at java.lang.Thread.run(Thread.java:722)

    "....java.lang.ClassNotFoundException: ADP ClassLoader failed to load: Script1
    at com.thortech.xl.dataobj.tcADPClassLoader.findClass(tcADPClassLoader.java:229)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)..."
    Did you do any modification on this environment these days? Eg: migration from OIM 9.x? If so, probably you removed certain supporting classes used by the adapter framework of this connector.
    I hope this helps,
    Thiago Leoncio.

  • Please help with error message invoking external service from BPEL

    Yes, I'm new to Oracle SOA Suite and BPEL Process manager. I've searched the forums, OTN, and Google and have not found any description of this error message:
    "oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: <operation-name>"
    Using JDeveloper 11.1.1.2.0 and WebLogic/SOA 10.3.2.0.
    The BPEL process was built completely using JDeveloper's graphical tools... I haven't done any raw editing of the BPEL files yet. What types of things might I possibly be doing wrong that would cause this error to occur? Any idea what two things the server is comparing and deciding that there's a mismatch? It doesn't look like it is even attempting to invoke the external service, but bailing out before that, thinking that it's going to send bad data. Below is a bit more detail.
    Also, I loaded up the WSDL (same one that I gave to JDeveloper) into SOAPUI. Then I took the payload that SOA was about to send (see below) and pasted it into SOAPUI. SOAPUI didn't complain and the target web service accepted the message and produced a "success" response. It looks like the payload is correct, so I don't know why SOA is complaining.
    Thanks for any help you can offer.
    =====================================================
    Faulted while invoking operation "UpsertEmp" on provider "SiebelUSEmployeeIntegration".
    <messages>
    <input>
    <UpsertEmpInput>
    <part name="SiebelMessage">
    <SiebelMessage>
    <ns1:USEmployment>
    <ns1:globalId>123456abcdef</ns1:globalId>
    <ns1:employeeId>000123456</ns1:employeeId>
    <ns1:effDt>1/1/2009</ns1:effDt>
    <ns1:emplStatus>A</ns1:emplStatus>
    <ns1:supported>N</ns1:supported>
    <ns1:employed>Y</ns1:employed>
    <ns1:activeStatus>Y</ns1:activeStatus>
    <ns1:hrEditOnly>Y</ns1:hrEditOnly>
    <ns1:paygroup/>
    <ns1:statusCode/>
    <ns1:origHireDate/>
    <ns1:termDate/>
    <ns1:latestHireDate/>
    <ns1:locationCode/>
    <ns1:locationDescr>Somewhere</ns1:locationDescr>
    <ns1:positionCode/>
    <ns1:jobCode/>
    <ns1:jobDescr/>
    <ns1:supervisorEmplid>000654321</ns1:supervisorEmplid>
    <ns1:deptCode>ITG</ns1:deptCode>
    <ns1:deptDescr>Information Technology Group</ns1:deptDescr>
    <ns1:ministryCode/>
    <ns1:ministryDescr>Core Services</ns1:ministryDescr>
    <ns1:subministryCode/>
    <ns1:subministryDescr>Information Technology Group</ns1:subministryDescr>
    <ns1:wwcFreeSubFlag>N</ns1:wwcFreeSubFlag>
    <ns1:lakeHartMC>1234</ns1:lakeHartMC>
    <ns1:testFlag>Y</ns1:testFlag>
    </ns1:USEmployment>
    </SiebelMessage>
    </part>
    </UpsertEmpInput>
    </input>
    <fault>
    <bpelFault>
    <faultType>
    <message>0</message>
    </faultType>
    <remoteFault>
    <part name="summary">
    <summary>oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: UpsertEmp</summary>
    </part>
    <part name="detail">
    <detail>Number of SOAP body elements and parts do not match in operation: UpsertEmp</detail>
    </part>
    </remoteFault>
    </bpelFault>
    </fault>
    <faultType>
    <message>0</message>
    </faultType>
    </messages>

    Welcome to BPEL. Take a moment, and write "it's a namespace issue" on a sheet of paper. Post it near your monitor. It won't always be a namespace issue, but it's usually a good thing to suspect first! Is the namespace prefix ns1: defined somewhere? Does your XML that is being sent really match what the WSDL has for input to the UpsertEmp operation? The namespaces for each element level in the XML need to match, not just the lowest level.
    When problems like this get really sticky, you can use TCP tunneling (obtunnel shell?) to capture what is really being sent to the server, and compare that to what is sent from SOAPUI. That's more useful if it's a subtle header problem, but you may get better error messages if you catch the BPEL message and send it using SOAPUI.
    Good Luck, Andy

  • How to display error message in front end application

    Hi Expert,
         I have one concurrent program that used to activate and deactivate the responsibilities ,
    I want that if any error occured in this program then how can I display the error message in application front end.
    Thanks in advance.

    Hi Paul,
    In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
    Regards,
    Noel

Maybe you are looking for