Concurrent manager failover

hi,
I did a cloning and addnode.
I enabled Parallel concurrent processing by keeping APPLDCP = ON in context file on both nodes and ran autoconfig. After that if i stop or start concurent manager on one node it stop/start on other node also instead of failing over.
can any one trace out what has happened.
Regards
Sandeep V

hi fadi
I followed the same procedure mentioned in
http://appsdbablog.com/blog/2007/02/implementing_parallel_concurre.html
but confused with step
Define and Verify your concurrent Manager definitions
should i give both primary and secondary node names in both concurrent manager and[b] Internal monitor

Similar Messages

Concurrent manager did not failover

Dear all,
i've setup the load balancer and PCP on 2 appsTier and 2 DBTier.
the failover of forms and HTTP are working fine.When i shutdown node 2, i can connect to common URL and open forms and run request because node one is the primary node for all managers and node 2 is the secondary node for failover. but when shutdown node # 1, i still can connect to common URL and open the self service, forms but could not submitted any job because there were no manager to handle the request.
i check my setup and i have primary and secondary on all those managers.
Please advise why the managers did not failover and where to check and correct.
Please help.
Thanks in advance.
Regards,

Hi,
What is the application release?
Can you find any errors in the CM log file?
Review the following documents and see if it helps.
Note: 271090.1 - Parallel Concurrent Processing Failover/Failback Expectations
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=271090.1
Note: 752604.1 - Failover Does Not Occur To The Secondary Node While The Primary Node Is Up
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=752604.1
Note: 408311.1 - Second connection failover
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=408311.1
Regards,
Hussein

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old   5: AND fcpp.concurrent_request_id = &&request_id
new   5: AND fcpp.concurrent_request_id = 451508
    REQ_ID NODE_NAME
LOGFILE_NAME
    451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
                                                              at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Re: Concurrent manager question

Hello,
How do you verify whether Conc manager is set up for Parallel concurrent processing or not?
By navigating to concurrent->manager->define-- by checking the primary node and secondary node of the manager?
if the manager have entries for both primary as well as secondary then the concurrent manager is set up for parallel concurrent processing? Is there any other way?Kindly Correct me if i am wrong.
Thanks,
928714.

928714 wrote:
Hello,
How do you verify whether Conc manager is set up for Parallel concurrent processing or not?
By navigating to concurrent->manager->define-- by checking the primary node and secondary node of the manager?
if the manager have entries for both primary as well as secondary then the concurrent manager is set up for parallel concurrent processing? Is there any other way?Kindly Correct me if i am wrong.
Thanks,
928714.Please see the docs referenced in old threads for PCP setup and failover scenarios -- http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&q=Oracle%20Application%20Testing%20Suite%20weblog:stevenChan
Thanks,
Hussein

Concurrent Manager doubt

Hello all,
We have 3 db node rac and 4 apps services.
concurrent mangegers are running in apps nodes. now I want to bring down db node1 and shutdown managers on node1.
here my question is if i want the mangers to run on other nodes so tht runnig jobs will not be impacted,wht is the process.
any chnages required in tns file.
pls suggest me the action plan.
Regards,
siva

Hi,
Please see these docs.
Concurrent managers not running/failing over to correct node in PCP/RAC environment [ID 790624.1]
How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
Parallel Concurrent Processing Failover/Failback Expectations [ID 271090.1]
Concurrent Manager Setup and Configuration Requirements in an 11i RAC Environment [ID 241370.1]
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

Concurrent Manager cannot find error description for CONC-System Node

Hi friends,
I m facing a problem while doing clustering for oracle EBS.i m using hpux11i with veritas cluster server for oracle DataBase cluster.i am doing 2 node cluster.i have installed oracle 11i apps with 9i DB.thru veritas i am able to do a db cluster failover.now i want to run oracle apps 11i too from both nodes(active/passive).so i configured a virtual IP address with a Virtual Hostname which will move along with the cluster failover.when i configure ora apps tier thru giving it virtual hostname concurrent manager dies with error--Concurrent Manager cannot find error description for CONC-System Node. i tried many things but unable to come up with a solution. pls help.
regs
Satish

Please post the contents of your hosts file here.
Is FND_NODES table populated correctly? Please run AutoConfig and make sure it completes successfully.
Why are the Concurrent Managers Failing with 'CONC-System Node Name not Registered" Error After Applying Patch 6461517? [ID 1108452.1]
OPP and SFM Managers do not Start [ID 1425409.1]
Thanks,
Hussein

Concurrent manager not working on multi tier apps r12.1

Hi All,
I've created clone environment from our production environment, following details of the environment:
DB: 11.1.0.7 - 2 nodes RAC
APPS: 11.1.3 - 2 nodes
OS: LINUX 64bit
hosnames: terbdb1, terbdb2
my problem is any request immediately appear as inactive nomanager.
here's cm log file of both nodes:
TERBDB1:
========================================================================
Starting TEST_0620@TEST Internal Concurrent Manager -- shell process ID 22842
          logfile=/app1/TEST/inst/apps/TEST_terbdb1/logs/appl/conc/log/TEST_0620.mgr
          PRINTER=noprint
           mailto=applmgr
          restart=N
             diag=N
            sleep=30
             pmon=4
           quesiz=1
          Reviver is ENABLED
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq r
eceived an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 20-JUN-2013 00:57:38 -
Shutting down Internal Concurrent Manager : 20-JUN-2013 00:57:38
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The TEST_0620@TEST internal concurrent manager has terminated with status 1 - giving up.
You have new mail in /var/spool/mail/applmgr
TERBDB2:
========================================================================
Starting TEST_0620@TEST Internal Concurrent Manager -- shell process ID 24424
          logfile=/app1/TEST/inst/apps/TEST_terbdb2/logs/appl/conc/log/TEST_0620.mgr
          PRINTER=noprint
           mailto=applmgr
          restart=N
             diag=N
            sleep=30
             pmon=4
           quesiz=1
          Reviver is ENABLED
+---------------------------------------------------------------------------+
Application Object Library: Concurrent Processing version 11.5
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Internal Concurrent Manager started : 20-JUN-2013 00:53:21
+---------------------------------------------------------------------------+
                   Process monitor session started : 20-JUN-2013 00:53:21
Starting INVTMRPM Concurrent Manager               : 20-JUN-2013 00:53:21
Starting RCVOLTM Concurrent Manager                : 20-JUN-2013 00:53:21
Starting FFTM Concurrent Manager                   : 20-JUN-2013 00:53:21
Starting C_AQCT_SVC Concurrent Manager             : 20-JUN-2013 00:53:21
Starting FNDCPOPP Concurrent Manager               : 20-JUN-2013 00:53:21
Starting DownloadProcessorMigrationMode Concurrent Manager : 20-JUN-2013 00:53:22
Starting DownloadProcessorNormalMode Concurrent Manager : 20-JUN-2013 00:53:22
Starting FNDCRM Concurrent Manager                 : 20-JUN-2013 00:53:22
Starting FNDSCH Concurrent Manager                 : 20-JUN-2013 00:53:22
Starting AMSDMIN Concurrent Manager                : 20-JUN-2013 00:53:22
Starting OAMCOLMGR Concurrent Manager              : 20-JUN-2013 00:53:22
Starting IEU_WL_CS Concurrent Manager              : 20-JUN-2013 00:53:22
Starting PASMGR Concurrent Manager                 : 20-JUN-2013 00:53:22
Starting IEU_SH_CS Concurrent Manager              : 20-JUN-2013 00:53:22
                     Process monitor session ended : 20-JUN-2013 00:53:22
Kindly advice.
Regards,
Ahmed

Salam Hussein,
this's output of PROD:
SQL> select concurrent_queue_name, p.node_name, db_instance
2 from fnd_concurrent_processes p, fnd_concurrent_queues q, fnd_cp_services s
3 where p.queue_application_id = q.application_id
4 and p.concurrent_queue_id = q.concurrent_queue_id
5 and q.manager_type = s.service_id
6 and p.process_status_code = 'A';
CONCURRENT_QUEUE_NAME          NODE_NAME                      DB_INSTANCE
FNDCRM                         ERPAPP1                        MCITERP1
FNDICM                         ERPAPP1                        MCITERP1
FNDSCH                         ERPAPP1                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
CONCURRENT_QUEUE_NAME          NODE_NAME                      DB_INSTANCE
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
STANDARD                       ERPAPP2                        MCITERP1
PODAMGR                        ERPAPP1                        MCITERP1
PODAMGR                        ERPAPP1                        MCITERP1
PODAMGR                        ERPAPP1                        MCITERP1
PODAMGR                        ERPAPP1                        MCITERP1
CONCURRENT_QUEUE_NAME          NODE_NAME                      DB_INSTANCE
RCVOLTM                        ERPAPP1                        MCITERP1
PASMGR                         ERPAPP2                        MCITERP1
INVMGR                         ERPAPP2                        MCITERP1
INVTMRPM                       ERPAPP1                        MCITERP1
WFALSNRSVC                     ERPAPP1                        MCITERP2
WFMLRSVC                       ERPAPP1                        MCITERP1
FTE_TXN_MANAGER                ERPAPP2                        MCITERP1
IEU_SH_CS                      ERPAPP1                        MCITERP1
IEU_WL_CS                      ERPAPP1                        MCITERP1
OAMCOLMGR                      ERPAPP1                        MCITERP1
FNDSM_ERPAPP2                  ERPAPP2                        MCITERP1
CONCURRENT_QUEUE_NAME          NODE_NAME                      DB_INSTANCE
FNDSM_ERPAPP1                  ERPAPP1                        MCITERP1
WFWSSVC                        ERPAPP1                        MCITERP2
AMSDMIN                        ERPAPP1                        MCITERP1
FNDCPOPP                       ERPAPP2                        MCITERP2
FFTM                           ERPAPP1                        MCITERP1
38 rows selected.
Regards,
Ahmed

Program was terminated by signal 6 Concurrent Manager encountered an error while running Oracle*Report

Hi,
My concurrent request failed due to
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Error occurred during initialization of VM
Could not reserve enough space for object heap
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xf7176d3e, pid=17695, tid=4096898752
# JRE version: 6.0_32-b05
# Java VM: Java HotSpot(TM) Server VM (20.7-b02 mixed mode linux-x86 )
# Problematic frame:
# V [libjvm.so+0x5f5d3e] ParallelScavengeHeap::tlab_capacity(Thread*) const+0xe
# An error report file with more information is saved as:
# /oracle/tst3/inst/apps/tst3_ora-web2/logs/appl/conc/log/hs_err_pid17695.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
what could be the reason behind this error.
If any one knows this Please help me..
Thank You

Hi,
Please provide your environment details.
Is this a custom program? was this report working fine? If yes, what changes were made lately?
Thanks &
Best Regards,

Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

Concurrent Manager encountered an error while running Oracle*Report

Hi,
I Ran a request and request is erroring out.Request ID 2727080
when i tried to review the log message it says
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
I'm attaching the log file below. Please suggest me the possible outcome.
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INVORGES module: Organization Hierarchy Exceptions Report
Current system time is 22-FEB-2008 12:37:32
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_LEGAL_ENTITY_NAME='India_Legal'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 17600
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 127
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2727080.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 22-FEB-2008 12:37:32
Thanks
Amith

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

11.5.10.2 Windows XP installation - Concurrent Manager not working

I have completed the 11.5.10.2 installation on windows XP without any issues. However, concurrent manager even though it starts but when I submit any request, "no active manager" displays in the requests window.
I tried if anyone had issues in this forum and found that I need to run autoconfig but that has not helped.
The following steps are being already tried but with no luck:
1. Stopped all application tier services (apache, fulfillment, forms etc)
2. Ran \oracle\viscomn\admin\scripts\<VIS_Server>\adautocfg.cmd - it completed successfully
3. One of the threads in this forum said "OracleVISOra806_2TNSListener80APPS_VIS" must be running in order for CM to work - it was not running and attempted to start but could not.
Here is the log file info for "OracleVISOra806_2TNSListener80APPS_VIS" service:
System parameter file is E:\oracle\visdb\9.2.0\network\admin\<VIS_Server>\listener.ora
Log messages written to E:\oracle\visora\8.0.6\NET80\log\apps_vis.log
TNS-01151: Missing listener name, APPS_VIS, in LISTENER.ORA
Thanks in advance..

As I ran autoconfig, it has set the service to start automatically...this is the service name I'm referring to: OracleVISOra806_2TNSListener80APPS_VIS
8.0.6 listner.ora
APPS_VIS =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= pravdhir)(Port= 1626))
SID_LIST_APPS_VIS =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM )
( ORACLE_HOME = E:\oracle\visora\8.0.6 )
( PROGRAM = E:\oracle\visappl\fnd\11.5.0\bin\fndsm.exe )
( ARGV0 = FNDSM_VIS_pravdhir )
( envs='MYAPPSORA=E:\oracle\visappl\APPSVIS_pravdhir.cmd,FNDSM_SCRIPT=E:\oracle\viscomn\admin\scripts\VIS_pravdhir\gsmstart.cmd' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = E:\oracle\visora\8.0.6 )
( PROGRAM = E:\oracle\visappl\fnd\11.5.0\bin\fndfs.exe )
( ARGV0 = VIS_pravdhir )
( envs='EPC_DISABLED=TRUE,NLS_LANG=American_America.UTF8,APPLFSTT=VIS_BALANCE;VIS;VIS_806_BALANCE;VIS_FO,APPLFSWD=E:\oracle\visappl\admin;E:\oracle\viscomn\temp;E:\oracle\viscomn\html\oam\nonUix\launchMode\restricted')
STARTUP_WAIT_TIME_APPS_VIS = 0
CONNECT_TIMEOUT_APPS_VIS = 10
TRACE_LEVEL_APPS_VIS = OFF
LOG_DIRECTORY_APPS_VIS = E:\oracle\visora\8.0.6\net80\admin
LOG_FILE_APPS_VIS = APPS_VIS
TRACE_DIRECTORY_APPS_VIS = E:\oracle\visora\8.0.6\net80\admin
TRACE_FILE_APPS_VIS = APPS_VIS
IFILE = E:\oracle\visora\8.0.6\network\admin\VIS_pravdhir\VIS_pravdhir_listener_ifile.ora
9.2.0 Listner.ora
VIS =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY= EXTPROCVIS))
(ADDRESS= (PROTOCOL= TCP)(Host= pravdhir.dp.com )(Port= 1521))
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= E:\oracle\visdb\9.2.0)
(SID_NAME = VIS)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\visdb\9.2.0)
(PROGRAM = extproc)
STARTUP_WAIT_TIME_VIS = 0
CONNECT_TIMEOUT_VIS = 10
TRACE_LEVEL_VIS = OFF
LOG_DIRECTORY_VIS = E:\oracle\visdb\9.2.0/network/admin
LOG_FILE_VIS = VIS
TRACE_DIRECTORY_VIS = E:\oracle\visdb\9.2.0/network/admin
TRACE_FILE_VIS = VIS
ADMIN_RESTRICTIONS_VIS = OFF
IFILE=E:\oracle\visdb\9.2.0\network\admin\VIS_pravdhir\listener_ifile.ora
As the system parameter is set to 9.2.0 directory and it is trying to find APPS_VIS entry which is not found in 9.2.0 Listner.ora file and hence erroring out.
I tried the following:
1. I copied the contents from 8.0.6 listner.ora file and added into 9.2.0 listner.ora file.
2. Rebooted
3. OracleVISOra806_2TNSListener80APPS_VIS > service started successfully
4. Started 9.2.0 listner service (OracleVIS_db920_RDBMSTNSListenerVIS) and Oracle Service manually
5. I ran autoconfig
6. I started all the application services manually
It worked but I don;t know where else the application will fail. So far so good. But is this the right procedure?
one more question? Do I need to run autoconfig after every reboot?

Report not dipalying any data while running using concurrent manager

Hi:
I am running a report in oracle 6i reports builder, the report runs perfectly and displays the desired data. But, when the .rdf is attached to concurrent manager and ran from front end, the report is blank. the report output is PDF and i can see oly the headers and the values for all the columns as '0', not sure why this is happening.
I am assuming that during the PDF conversion some thing is going wrong...any help is much appreciated...
Thanks for your time...
Srini...

This is an Oracle Apps report, right? You'd better go to the eBusiness Suite forum for EBS related questions.

Internal concurrent manager is not up

HI
db : 11g
apps : 11.5.10.2
I found this error in internal conc mgr log file.
APP-FND-01564: ORACLE error 1 in insert_icm_record
Cause: insert_icm_record failed due to ORA-00001: unique constraint (APPLSYS.FND_CONCURRENT_PROCESSES_U1) violated.
The SQL statement being executed at the time of the error was: INSERT INTO FND_CONCURRENT_PROCESSES (CONCURRENT_PROCESS_ID, LAST_UPDATE_DATE, CREATION_DATE, CREATED_BY, LAST_UPDATED_BY, ORACLE_PROCESS_ID, QUEUE_APPLICATION_ID, CONCURRENT_QUEUE_ID, OS_PROCESS_ID, SESSION_ID, PROCESS_START_DATE, PROCESS_STATUS_CODE, MANAGER_TYPE, NODE_NAME, DB_NAME, DB_DOMAIN, SQLNET_STRING, DB_INSTANCE, Instance_Number) VALUES (:cpid, SYSDATE, SYSDATE, :mgrusrid, :mgrusrid, :opid, :qappid, :qid, :ospid, :osid, SYSDATE, 'A', 0, :node, :dbname, :dbdomain, :dbinst, (Select instance_name from v$instance), (Select instance_number from v$instance)) and was executed from the file &ERRFILE.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The PROJ2_0907@PROJ2 internal concurrent manager has terminated with status 1 - giving up.
========================================================================
Starting PROJ2_0907@PROJ2 Internal Concurrent Manager -- shell process ID 7041
logfile=/oracle/instance/proj2/proj2comn/admin/log/PROJ2_rh53vm01/PROJ2_0907.mgr
PRINTER=noprint
mailto=oracle
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
establish_icm - Unable to insert ICM record
Call to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 07-SEP-2009 06:36:25 -
Shutting down Internal Concurrent Manager : 07-SEP-2009 06:36:25
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
APP-FND-01564: ORACLE error 1 in insert_icm_record
Cause: insert_icm_record failed due to ORA-00001: unique constraint (APPLSYS.FND_CONCURRENT_PROCESSES_U1) violated.
The SQL statement being executed at the time of the error was: INSERT INTO FND_CONCURRENT_PROCESSES (CONCURRENT_PROCESS_ID, LAST_UPDATE_DATE, CREATION_DATE, CREATED_BY, LAST_UPDATED_BY, ORACLE_PROCESS_ID, QUEUE_APPLICATION_ID, CONCURRENT_QUEUE_ID, OS_PROCESS_ID, SESSION_ID, PROCESS_START_DATE, PROCESS_STATUS_CODE, MANAGER_TYPE, NODE_NAME, DB_NAME, DB_DOMAIN, SQLNET_STRING, DB_INSTANCE, Instance_Number) VALUES (:cpid, SYSDATE, SYSDATE, :mgrusrid, :mgrusrid, :opid, :qappid, :qid, :ospid, :osid, SYSDATE, 'A', 0, :node, :dbname, :dbdomain, :dbinst, (Select instance_name from v$instance), (Select instance_number from v$instance)) and was executed from the file &ERRFILE.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The PROJ2_0907@PROJ2 internal concurrent manager has terminated with status 1 - giving up.
=============
_ 1 _
Routine AFPEIM encountered an ORACLE error. ORA-00001: unique
constraint (APPLSYS.FND_CONCURRENT_PROCESSES_U1) vio.
Review your error messages for the cause of the error. (=<POINTER>)
Where as all other conc mgr are up and when i submit one conc request it completed normal.
How should i bring the ICM up?
Thanks a lot................

Hi,
Please refer to (Note: 552142.1 - Error APP-FND-01564 ORA-00001 when Starting the Concurrent Managers).
Regards,
Hussein

Request set not getting picked up by concurrent manager.

Hi All
We have an issue today where the daily scheduled request set did not run and status for which remained at "Pending Scheduled". Concurrent Manager did not pick up this and status remained:
This request is waiting to be processed by the Conflict Resolution Manager.
This request cannot yet begin execution because other requests may conflict with it. The Conflict Resolution Manager will determine when this request may begin execution.
User <user_ name> submitted this request on 06-MAR-2011 23:17:33.
No action required. This is a normal condition.
This request may have to wait on one or more of the following requests to complete before it can begin execution:
I checked all the 'incompatibilities" of the programs for request set and none of them were running.
We did the below, but no success:
1. Restarted the concurret manager
2. Cancelled the scheduled run and submitted request set again.
Still the status remained at "Pending Scheduled" with above message.
When we tried to run the individaul programs for that request set it all worked fine. So I would like to know what could be the issue and how to overcome this. I think the issue could be with request set as the individual program is working fine.
Any pointers will be highly appriciated.
Many Thanks,
-Shashank

which manager is Processing that request.. if it is Custom manager Then U should excllude this concurrent program from the concurrent manager.
otherwise both the Standard manager or custom manager both are not going to pickup the process..
he
Please Check The Cocnurrent Manager which is going to process and check wether its included in the respective manager.
Thanks
Reddy
http://11iapps.wordpress.com

Concurrent manager failover

Similar Messages

Maybe you are looking for